Management for EqualLogic failover port
I'm setting up a Dell EqualLogic PS6210XV.
I configured dedicated management interface. When I disconnect the management on the active controller port, it is not automatically switch to the management port on the controller to start (as a port 10 GB of data). Please guide me how to do this fail over automatically.
Hello
There is no automatic failover with dedicated Mgmt ports. You will need to either restore a connectivity or a failover on the other controller.
Kind regards
Don
Tags: Dell Products
Similar Questions
-
Required for NAC firewall ports manager manage/add the Cisco switch
Hello
I am trying to add switches cisco for the NAM, but I am not able to add the switch I get the error "unable to control switch" I tried opening ports 161-162 on the firwall; If I were to allow all traffic between the NAM and the switch, cisco NAM is able to add/manage the switch.
Do not know what are the other ports may be required for cisco NAM for managing the switch?
Thank you.
Hello
As far as I KNOW, only UDP 161 and 162 for SNMP communication ports must be open.
Please make sure that you have configured the correct port on the switch:
(config)# snmp-server host 172.16.1.61 traps version 2c cam_v2 udp-port 162 mac-notification snmp
If still does not, I would check the logs on the firewall for any traffic blocked between the cam and the switch.
HTH,
Tiago
--
If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.
-
We organize a Dos based Windows 98 application and I need to find a driver for the integrated parallel port. The motherboard is an ASUS P5GD2-TMX/S. Both the local provider and ASUS only provide XP and more drivers for the motherboard. How can I determine the manufacturer of the parallel port and download the driver directly from their site? I done this before for the serial port and downloaded and installed a Sunnix driver, which worked.
I did some research on the North Bridge, South bridge and the Super i/o chip set, but to no avail. Here is a copy of the output of sysinfo32.
[Peripheral problem]
Unknown device
Unknown
This device has a problem: Code = 28 (0x1C)
The drivers for this device are not installed correctly. To install the driver
for this device, click the driver tab, then click on set to update driver.
The registry key: HKEY_LOCAL_MACHINE\enum\ACPI\ * INT0800\0
Alloc resources: logical Configuration 0
Memory address range: Base = xFFB80000 End = xFFBFFFFF
Forced resources: None
Start resources: logical Configuration 0
Memory address range: Base = xFFB80000 End = xFFBFFFFF
Filtered resources: None
Core resources: logical Configuration 0
Memory address range: Base = 00000000 00000000 Min End = x x = xFFB80000 Max = xFFBFFFFF
Driver: Driver is not installedStandard 101/102-key or Microsoft Natural Keyboard
Keyboard
This device has a problem: Code = 27 (0x1B)
System failure: try changing the driver for this device. If this does not work,
see the documentation for your hardware.
The registry key: HKEY_LOCAL_MACHINE\enum\ACPI\ * PNP0303\0
Alloc resources: None
Forced resources: None
Start resources: no
Filtered resources: logical Configuration 0
IRQ: mask 0: x 0002
IO range: Base = x 0000 End = 0000 Min = Max = x Alias 0060-0060 x x = x 00, decode = x 00
Base = x 0000 End = 0000 Min = Max = x Alias 0064-0064 x x = x 00, decode = x 00
Core resources: logical Configuration 0
IRQ: mask 0: x 0002
IO range: Base = x 0000 End = 0000 Min = Max = x Alias 0060-0060 x x = x 00, decode = x 00
Base = x 0000 End = 0000 Min = Max = x Alias 0064-0064 x x = x 00, decode = x 00
Driver: Keyboard\0003
Driver date: 23/04/1999
Driver: idvkd.sys
File size: driver not installed
File date: driver not installed
Driver: hidparse.sys
File size: 44368 (0xAD50)
File date: 23/04/1999-22:22
Legal name: Microsoft Corporation
File version: 4.10.2222
Driver: hidclass.sys
File size: 23520 (0x5BE0)
File date: 23/04/1999-22:22
Legal name: Microsoft Corporation
File version: 4.10.2222
Driver: hidvkd.sys
File size: 5088 (0x13E0)
File date: 23/04/1999-22:22
Legal name: Microsoft Corporation
File version: 4.10.1998PCI card
Unknown
This device has a problem: Code = 28 (0x1C)
The drivers for this device are not installed correctly. To install the driver
for this device, click the driver tab, then click on set to update driver.
The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_2668 & SUBSYS_81A71043 & REV_04\BUS_00 & DEV_1B & FUNC_00
Alloc resources: logical Configuration 0
Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
Forced resources: None
Start resources: logical Configuration 0
Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
Filtered resources: None
Core resources: logical Configuration 0
IRQ: mask 0: xFFFF
Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
HW revision: 004
Driver: Driver is not installedUniversal Serial Bus PCI
Unknown
This device has a problem: Code = 28 (0x1C)
The drivers for this device are not installed correctly. To install the driver
for this device, click the driver tab, then click on set to update driver.
The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_265C & SUBSYS_265C1043 & REV_04\BUS_00 & DEV_1D & FUNC_07
Alloc resources: logical Configuration 0
Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
Forced resources: None
Start resources: logical Configuration 0
Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
Filtered resources: None
Core resources: logical Configuration 0
IRQ: mask 0: xFFFF
Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
HW revision: 004
Driver: Driver is not installedPCI system management bus
Unknown
This device has a problem: Code = 28 (0x1C)
The drivers for this device are not installed correctly. To install the driver
for this device, click the driver tab, then click on set to update driver.
The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_266A & SUBSYS_266A1043 & REV_04\BUS_00 & DEV_1F & FUNC_03
Alloc resources: logical Configuration 0
IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
Forced resources: None
Start resources: logical Configuration 0
IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
Filtered resources: None
Core resources: logical Configuration 0
IRQ: mask 0: xFFFF
IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
HW revision: 004
Driver: Driver is not installedThe motherboard seems to be Intel 915P chipset.
Don't know if it will help, but try installing the software Intel(r) utility V6.0.1.1002 of Installation for Windows 2000/XP/2003 (under Win2K - others) for P5GD2 motherboard from the following link that appears in support of Windows 98 Second edition:
http://www.ASUS.com/motherboards/P5GD2/HelpDesk_Download/
Then restart the computer.
-
Remote Server Update Manager with different http port
To put it simply, I think I might have some problems, but I installed the update on a remote server Manager (and not on the VC server) and since he also manages the WSUS updates, I couldn't use port 80 for the http port so I changed it to 81. I have problems with the VC connection to Manager Update server. I can't download the plugin to activate it. Also, I noticed that there is a full installation of the 2.5u3 on our server of VC, which also included the Update Manager. Should I uninstall that before the new one would connect upward?
Kyle
I'm Tryin '
I found something good again
-
Part number for the serial port in option HP Z420
I am looking for the serial port in option for the HP Workstation Z420, but in a datasheet, it is only mentioned as an optional serial port kit.
What is the number on the right side of the product? The same for the workstation Z400 was PA716A, but it was not compatible with the new workstation model...
I used the same part number, I used to model Z400 and it seems to work well.
HP code is PA716A. -
Contact for Continua Bluetooth Manager for Windows window
Hi all
Could someone kindly provide information on "continued Bluetooth Manager for Windows? The original Web page is about Alliance health continued:http://www.continuaalliance.com/certified-products/Continua-Bluetooth-Manager-for-Windows-manufactured-by-Toshiba.html
How to contact the related service about this product? I can't find information on the Web from TOSHIBA site.
Thank you!
Hello
I don't very well if it could be useful or not, but here's a Toshiba BT m Portal:
http://APS2.toshiba-tro.de/Bluetooth/There is an option called: maybe your comments, you can use this contact form to get comments on this theme
Welcome them
-
HP Compaq dc7700p: need driver for PC serial port
"Hello, I have a desktop Tower" HP Compaq dc7700p Convertible Minitowers "running windows 7 Ultimate and need driver for PCI Serial port... here's hardware id:
PCI\VEN_8086 & DEV_2997 & SUBSYS_2802103C & REV_02
PCI\VEN_8086 & DEV_2997 & SUBSYS_2802103C
PCI\VEN_8086 & DEV_2997 & CC_070002
PCI\VEN_8086 & DEV_2997 & CC_0700Thank you
Hello:
You need this driver... You may need to install it manually.
-
Windows 2000 version of the Power Manager for A75
Hi all
I installed Windows 2000 in an A75-S226, but I can't find a utility Power Manager for this OS. I tried the version of Windows XP, but as expected, it did not work.
Is there someone else by using Windows 2000 with this model?
Thank you
Rubens
Hello
This unit has been designed and delivered in the U.S. market
He was able to find a utility power for W2k on the site Web of Toshiba driver we.
Please visit this link:
http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_dtlViewDL.jsp?soID=729833&MOID=713725&BV_Ses sionID=@@@0394886756.1138114313@@@&BV_EngineID=c ccfaddgkkelmigcgfkceghdgngdgmn.0 & ct = DLGood bye
-
Need to disable the service manager for down load adobe
Need to disable the Service Manager for down load adobe
Original title: program compatibility Application Applications App Apps GaGames Legacy Crash crashes hang hangs
Moved from feedback
Internet Explorer version unspecified - unspecified BONESHello
What Adobe program you are trying to download?
Flash Player
http://helpx.Adobe.com/Flash-Player/KB/installation-problems-Flash-Player-Windows.htmlAdobe Reader
http://helpx.Adobe.com/Acrobat/KB/quick-fix-install-download-reader.htmlDon
-
Hello.
I have the HP Officejet 6700 Premium e-all-in-one, and I can't find any way to access the color management options.
The printer is attached (Wi - Fi) to my iMac Mac OS 10.8.5 (Mountain Lion).
I want to correct a magenta cast for the photos I printed. I had the problem of magenta-cast in Lightroom and use Preview to print the photos, so now I want to work with color profiles in Photoshop Elements.
Photoshop Elements is recommended I have 'disable color management in the printer Preferences dialog box.
However, I am not able to find for the 6700 color management preferences in settings under Mountain Lion:
Not sub (Apple) > System Preferences > print & Scan.
Not sub (HP utility) > Open Embedded Web Server.
Not sub (HP utility) > the printer settings.
Non-print preview dialog.
I can't find any clear directions in the online help (HP or elsewhere) that I've read so far.
Any suggestions would be most appreciated.
Thank you!
Michael
Hello
Thanks for the reply and the screen shot.
The first thing I want to do you is to reset the printing system.
OS X Mavericks: reset the printing systemThen add the printer, however when it by adding not just click on the name of printers, click Add printer or a scanner. Make sure that the 'use' is set to the printer and not Airprint.
If it is displayed as Airprint, you will be missing feautres compared to the actualy printers driver.After that, I'll provide you know several documents that you may find useful to perform this task.
Documents from HP:
Color management for the HP inkjet printing products new generation
Advanced color management overviewApple documents:
Mac OS X 10.6: edit images using ColorSync Utility
Mac OS X v10.6: about ColorSyncDocument from CNET:
How to use ColorSync Utility to assign color profiles in OS XI know some say 10.6, but they give you a reference and the idea, trying to do what you are.
Please let me know if that helps. -
Backup and HP Recovery Manager for Windows 7
I installed all the software and drivers that came with the HP upgrade DVD. But, I found that the Backup and Recovery Manager missing on DVD. Is there a Backup and Recovery Manager for Win 7? I liked the manager backup and restore that was available on my Vista, when I bought this laptop, but is currently unavailable due to upgrade! All the solutions for this? I don't want to use the default Windows Backup that I don't have a separate HARD disk for the time to store the backup here and do not want to fill up my hard drive with data backup! Thank you.
Ok thank you. I have my recovery partition intact Vista. So I think, I should be able to recover if I have some kind of problem! I was able to find a backup and recover in Win 7 itself. Maybe I should wait for the software will be released by HP. Thank you once again!
-
Original title: usb port to COM port.
I only have usb ports on my computer, but the software of kenwood radio is looking for a com port com1, com2, com3 or com4. How can I do think I have the cable plugged into usb port is a com port?
Hi sfcasko,
It seems that the hardware configuration you use is not supported by the software.
I recommend you contact the manufacturer of your computer for help.
-
Free download Acer eRecovery Management for win 7 please!
Free download Acer eRecovery Management for win 7 please!
Hello
I agree it would be nice.
Concerning
George
-
Error 1310 installing Seagate manager (for external HDD)
I try to install Seagate manager (for external hard drive), but I get the following error
"Error 1310.Error writing to file C:\Program Files\Seagate\SeagateManager\iconfiles\BlackArmor\autorun.inf. Make sure you have access to this directory.If I ignore this error then then following error"Error writing to the file C:\Program Files\Seagate\SeagateManager\iconfiles\BlackArmor\BlackArmor.ico 1304.Error."If I cancel the installation after the second error then comes the final error."Error 1603 Fatal error during installation. "Consult Windows help install (Msi.chm) or MSDN for more information.Hello
Some applications or services may cause these error messages. Services are specialized programs that perform functions to support other programs. Disable other applications, including startup items (items that start automatically with Windows) and services by performing a clean boot on your computer. This helps identify the third-party software that is causing the problem to occur.
Note: Follow the steps in the article to restart your computer in normal mode. -
eMachines Recovery Management for ET1161 Windows Vista does not
eMachines Recovery Management for ET1161 does not, I have Vista Home Basic
Hello
If you have problems with the process of recovery of manufacturers, contact the manufacturer
It's their recovery process not microsofts
Maybe you are looking for
-
translation of a foreign language
Ive sent a wiring diagram for my work except the diagram, the details are in German y at - it a way to translate English
-
While trying to solve a problem with IE 8, I have a problem trying to run a clean boot. When I start up I get a message on change in the config file. Click ok and sys config is displayed. Now, if I make a modification, OR not, I get an error message
-
Sansa Clip won't work! Help!
OK well I was downloading an update, then my lil brother unplugged. Now, it won't turn even if I charge it for 12 hours! I tried the second 15 reset thing did not work, and when I plugged it into the wall instead of the computer (when connected to th
-
network discovery is disabled warning
How do you turn "network discovery is disabled" alert? I want discovery network to be powered off and would that warning stops appearing everytime I open the network window. PS, I know, ' why then do I need to open the network window. I just do. Than
-
Hello I have 1 uplink 10 Gbps each of my FI. I need to remove 10G and connect 1 G instead. A two cables in parllel to 10G and connect to uplink switch and then remove the link to 10G without no interruption of service. Also can I connect the new 2 x