Automatic provisioning using the access policy

Similar Questions

• Not able to automatically configure users in the AD via the access policy

  Hello
  I can connect to AD and manually configure a user AD through IOM. Through very well. However, if I use an access strategy to do the same, he's stuck in step 'supply '. All values are identical in shape.
  Any suggestions on why it works manually but not automatically? I have all values including ad server filled my form. Are there additional configuration in the access policy that I'm missing?

  You fill out or have prepops for all the required fields in the form of commissioning?

  Do you have the automatic backup on?

  Best regards
  / Martin

• several resources configured by the access policy, allow multiple set to no

  Hi Experts,
  
  I have a problem with the automatic supply of the resource based access policy Ad and Exchange resource (or any two resources that are dependent on each other).
  
  That's what I'm doing (11.1.1.3 bp2):
  The user of the ad and the Exchange are the two auto-save, auto - prefill and do not allow several. Exchange depends on the AD Server (which assigns the user ad). Based on a rule, the user gets a role, having an access policy giving the user of the ad server and Exchange resources.
  
  Because my AD Server/user implementation updates the user profile during deployment of the access policy is either revalued. At this point the resource Exchange has not any State yet, even if it is waiting on the AD resource to be configured. Accordingly, another Exchange resource is added to a kind of queue, no AD resource yet again in a wait state. As soon as the resource AD is supplied all the wait resource Exchange are provided leading to many Exchange resources.
  
  On a side note, when a resource is assigned manually in the interface web IOM, that once all void tasks are made (or failed) the resource appears on the tab "resources" for a user. I think it would be more logical that this resource is listed immediately to the provision of status. Maybe it's to be able to perform a restore or validation occurs only after all the tasks are performed.
  Bundle 4 Patch did not help at all.
  
  Suggestions are welcome.
  
  Kind regards
  
  Jan Willem Beusink

  Hello

  Thank you, we did the debug more. The real problem was setting a value on the profile of the user, by a membership rule added a user to a different role, leading to the evaluation of access policies. in the process of AD in combination with prepopulators on the Exchange form that take time to complete (a few seconds). If Exchange prepops where not ready before access where assessed to new policies, we got two exchange resources. We solved the problem by using (a variant of) your suggestion leaving the task of Exchange processes a UDF and adapt the rule to check for this field's initial membership.

  Hi low (member of the team of Jan Willem)

• Resource not available for selection in the access policy

  
  Hello

  I'm working on OIM11g R2 PS2 explore all of the new features available.

  I created a resource COMPUTING (SunONE_Resource) for the provision to users of SunONE (using the connector of the OID ) and got users provisioned it successfully asking for it by the Instance of the Application. Now I want to do it Auto-mis in service. So, I created a single policy role and access. But in step 2 of the access policy where we Julie IT resource, my resource (SunONE_Resource) IT is not visible and is the resource available only: LDAP User. I have selected LDAP user as a resource and create access policy.

  But when I'm allocating the specific role of the user, the user does not have configured my SunONE resource.

  I have run the Task Scheduler to assess access policies manually as well.

  Please help me in this regard.

  Kind regards

  Maryse

  Thanks for your quick response.

  I have fixed the problem. The problem was there 2 political access do the same thing. Thus, the system searches for a system property: XL. AllowAPBasedMultipleAccountProvisioning and it has been set to false.

  So, I changed the settings to another AP who was who collide with mine. Then it worked.

• Notification does not send when supply is triggered by the access policy

  Hello
  
  I implemented a notification when a user is created in the ad. In fact the mail is sent when I set up the resource through the administration interface. I have an access policy that may trigger the commissioning of the AD resource; but in this case, no mail is sent.
  
  What I want to achieve, send an email to someone (not the usermanager nor the plaintiff fields) when the AD account is provisionned. I have put an assignment to a user and check the assignment, but no mail is sent if the resource is supplied via the access policy.
  
  Thanks in advance for your help

  I solved this problem by writing custom process tasks 'send Email Notification on creation of the user'...

  In the Java Code of the adapter, I read the values of the "Mail server", IT resource and my custom message template definition...

  (Using tcITResourceOperationsIntf and tcEmailDefinitionOperationsIntf)

  Then, using the OOTB class in mail.jar and xlDataObjects.jar, I sent the email...

  import com.thortech.xl.dataobj.util.tcEmailNotificationUtil;

  tcEmailNotificationUtil emailNotificationUtil = new tcEmailNotificationUtil (dataProvider);

  emailNotificationUtil.constructEmail (emailTemplateName);

  emailNotificationUtil.sendEmail (toEmailAddress);

  Since simply assigning this task to that specific user sends notification by e-mail to this user, trigger this task 'Send Email Notification on creation of the user' too with the task you want to assign to this user... that is to trigger the two tasks at the same time... It is simply divide (a solution) of the functionality of the original task

• Continue to try to turn on my firewall, but won't automatically and using the manual option does not work either.

  Continue to try to turn on my firewall, but won't automatically and using the manual option does not work either.  Can repair you.

  Hello
  Follow these instructions:
  Download and install Windows Repair:
  http://MajorGeeks.com/tweaking.com_-_Windows_Repair_d7141.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let us know if that helps you.
  Brian

• Disable AD account with the access policy

  Hi all
  
  How can I disable AD account with the access policy (or create AD account in the off state)
  
  Kind regards
  Vladimir

  1. when a user is created in the HR system, must create a new IOM account and a new account AD must or must not (according to HR data) be created in AD in the off State

  Can be reached by the access policy but for Disbaled State, you must call turn off the task of the user on the success of Usertask to create in the definition of user AD process

  2. when a user is marked as rejected in the HR system, the AD account if exist, must be deactivated and moved to a special place in the AD tree.

  It can be reached through a custom code JNDI.
  You can move the user to some different containers.
  You can search in OOTB Conector something similar to the user to get around (some adapter)

  3. the same rules will be applied if the IOM account is created or marked as "Rejected" manually by the administrator of the IOM

  Same Setup will work... No need for additional configuration.

• In a book, you can automate first using the master right left/first page?

  In a book you can automate first using the master right left/first page?

  Yes.

  Use the mapping table of the Master Page to identify a unique paratag (usually the title or something similar) on your first page of a chapter and then map it to the appropriate of the Mater page personalized that. The technique is discussed here:

  http://help.Adobe.com/en_US/FrameMaker/using/WSd817046a44e105e21e63e3d11ab7f7960b-7ee9.htm l

  www.adobe.com/Print/Tips/frm7masterpage/index.html

  www.adobe.com/Print/Tips/frm7masterpage/pdfs/frm7masterpage.pdf

  TV.adobe.com/watch/Tips-and-Tricks-for-Technical-Communicators-to-Maximize-Productivity/ma ster-page-mapping-tables

  http://wiki.scriptorium.com/Tiki-index.php?page=mapping+paragraph+tags+to+master+pages

  http://blog.rockymountaintraining.com/?p=1111

• Cannot change the access policy (firepower 6.1)

  Hello

  I use the Service Module of firepower on ASA5525 and MC, firepower, the two version 6.1.

  After the upgrade to version 6.1, I can't save any changes on my access policy. I always get a message "error saving data - another operation by another user has prevented this operation. Please try again after some time.
  I am the only on access to the MC, there is no task that is running and I tried to reload the MC, but I got the same error.

  Please, did anyone see that? This could be the cause?

  Thank you.

  I solved the problem by replacing all the objects 'Private network' by 'IPv4-private-All-RFC1918.

• Using the Access database in CS5?

  I'm incredibly frustrated. I have a simple database in Access, consisting of SSN, phone number, address, name, ID (primary key). I have a simple form with a select / / value of the option initially filled with the 'name' field, return the ID as value when picked up. I have a function in the header, called Onchange.

  In the Onchange function I can generate a successful

  "Select * where ID = '123'.

  now how can I apply to the Access database, a given record of return in a recordset that can now be dissected in the various fields which is then displayed on the screen?

  An example would be wonderful...

  Thank you!

  Ross

  I didn't watch the first example, but certainly the second example shows how to use Access in Dreamweaver, full screen. Just click on YouTube.

  Which brings me to ask why you use Access when MySQL is a much better option.

• Assignment of identifiers automatically or using the value of basic in the rules

  The question is quite simple. I want to order the instances of an entity. How these bodies are classified are of no importance. The problem is that the only information available on instances of the age, which may be one of several bodies and makes impossible to order. Is there any way to assign an identifier automatically apply this ranking, say 0... the number of instances - 1 or is - it possible to use the value of an instance of rules?

  A loop is a bad choice here - a recursive function would end in the same logical dilemma on the tie-break as you you. (If I can offer any advice it would be that the rule loops should be a last choice as a general rule, not a first, they are certainly not as easy to manage as recursive functions in a standard programming language).

  Essentially, you want to work on the price of the ticket (IE an attribute at the level of the entity of ticket):

  the price of the ticket =
  0; If the number of tickets more expensive than me + number of tickets as well as me<= number="" of="" free="">
  nominal value * number of tickets I have to pay for my price/number of tickets, the same value as me; If the number of cheaper tickets than me < number="" of="" free="" tickets="" and="" number="" of="" tickets="" more="" expensive="" than="" me="" +="" number="" of="" tickets="" same="" as="" me=""> number of free tickets
  otherwise the price of the ticket face value =

  where the number of tickets I have to pay for my price = number of cards of the same value that me - (free tickets - number of cheaper tickets than me)

  As I said, you can use alleged relationships to help you work on:
  number of cheaper tickets than me
  and
  number of tickets as well as me

  Published by: Sean Reardon on April 11, 2013 08:35

• How to restore my computer to a point before using the Accessibility Wizard

  original title: Accessibility Wizard

  How can I return my pre system Accessibility Wizard changes.  Play with the Accessibility Wizard, I've made changes that I am not satisfied, but now can't go back to the way things were.  How can I return the default stuff?

  Try going to the control panel (start-> settings-> Control Panel) and click on "Accessibility Options."
  On my system, all check boxes are unchecked, except those of the 'bar' under the 'Général' tab

  HTH,
  JW

• 'Radio' using the access point

  Hi all

  Is it possible to use a radio for mobile users and another radio station for laptop users in AP... ? If possible how do we proceed?

  Thanks in advance

  KVS

  Well, if you talk to users on like the 2.4 and mobile users on the 5 GHz, of course. You would need two separate SSID and assign them to who ever radio, but not really a good idea. How much house/AP wireless routers have been done initially, but I don't see why you would do that. If you wanted to divide the different devices, just use the different SSID and can then choose what radios they join. Some devices could do support the 2.4 ghz and the 5 GHz so that you limited.

  Sent by Cisco Support technique iPhone App

• When is it a good idea, if ever, use the tag &lt; policy &gt;?

  Wonder if it is always necessary to use the < police > tag because it is deprecated in HTML 3,801.

  <font size="3" color="red">This is some text!</font>

  Never use it.

• Need help using the access list blocking a single IP address

  Basically, I'm being attacked by a massive spammer. I managed to deny him access to our mail server, however, his repeated attempts to connect to the same server is in our file of e-mail magazine. What I want to do is set up a block for its specific IP address in our 2621 router. I tried a few different combinations using access-list, but nothing helped. Can anyone suggest something? Thank you!

  Joe

  Joe,

  If you know that the attack came from a particular ip address, you can create an extended access list and deny that IP.

  access-list 101 deny ip host host of attacker_ip_address e-mail_server_ip

  If the source ip address is random then you must put a sniffer or take a look in the syslog to see if there are any model ID as a string. You can then configure NBAR on the router to mark the package and then drop the packets.

  Here is a link that explains the procedure:

  http://www.Cisco.com/en/us/NetSol/ns110/ns170/ns171/ns128/networking_solutions_white_paper09186a008009c8ad.shtml

  Thank you

  Renault