Not able to automatically configure users in the AD via the access policy

Similar Questions

• Notification does not send when supply is triggered by the access policy

  Hello
  
  I implemented a notification when a user is created in the ad. In fact the mail is sent when I set up the resource through the administration interface. I have an access policy that may trigger the commissioning of the AD resource; but in this case, no mail is sent.
  
  What I want to achieve, send an email to someone (not the usermanager nor the plaintiff fields) when the AD account is provisionned. I have put an assignment to a user and check the assignment, but no mail is sent if the resource is supplied via the access policy.
  
  Thanks in advance for your help

  I solved this problem by writing custom process tasks 'send Email Notification on creation of the user'...

  In the Java Code of the adapter, I read the values of the "Mail server", IT resource and my custom message template definition...

  (Using tcITResourceOperationsIntf and tcEmailDefinitionOperationsIntf)

  Then, using the OOTB class in mail.jar and xlDataObjects.jar, I sent the email...

  import com.thortech.xl.dataobj.util.tcEmailNotificationUtil;

  tcEmailNotificationUtil emailNotificationUtil = new tcEmailNotificationUtil (dataProvider);

  emailNotificationUtil.constructEmail (emailTemplateName);

  emailNotificationUtil.sendEmail (toEmailAddress);

  Since simply assigning this task to that specific user sends notification by e-mail to this user, trigger this task 'Send Email Notification on creation of the user' too with the task you want to assign to this user... that is to trigger the two tasks at the same time... It is simply divide (a solution) of the functionality of the original task

• After the upgrade to IE 10, not able to download/export users excellent reports in Oracle EBS 12.0.6 forms order orgranizer

  After the upgrade to IE 10, not able to download/export users excellent reports in Oracle EBS 12.0.6 forms order orgranizer. It of something to do with the settings of internet explore, please advise to solve this problem.

  The new window opens and immediately disappears.

  Thanks for your replies.

  We can get the exported file now. In IE 10, all results export are saved temporarily in the download options, press Ctrl + J (view downloads) and save the results and open it.

• Re: Dynadock not able to properly configure external monitor

  Dear Sir/Madam,

  I found a problem with my Dynadock (PA3541EY1PRP) in the terms that he is not able to properly configure the monitor (LG Flatron E2250V-PN).
  I would clear my PC works under win 7 64 bit.

  Thank you very much for your support.

  Concerning
  MAx

  Hi dude

  I think that the people here in the forum would be able to help you if you provide more details on this topic

  you know what I mean?

• I have a copy of photoshop cs2 (version 9) and I am not able to record by phone or the Internet.  Is there a number I can contact for this?

  I have a copy of photoshop 9 and I am not able to record by phone or the Internet.  Is there a number I can contact for this?

  CS2 disabling servers have been arrested, but a version of the program is available for users like you

  Read and follow the directions here:

  you will need to download the new cs2 version and used the serial number provided.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• someone is using my email address to send emais. I tried to reset my password but I am not able to. He says that the answer to my secret question does not.

  someone is using my email address to send emais. I tried to reset my password but I am not able to. He says that the answer to my secret question does not. I know I'm getting the correct ansewer. Help, please.

  Hi, Catherine.

  You'd better post in the Windows Live Solution Center-Hotmail like that is dedicated to Windows Live Hotmail.

  If you have not implemented alternative methods to check your Hotmail credentials, I suggest do it after your account is returned.  For more information, see Security Hotmail to protect and recover your account .

  Good luck!

• All of a sudden I am not able to take an item from the source in Premiere Pro in the timeline, I sort

  All of a sudden, I'm not able to take a clip from the source in first Pro CC in the timeline, I tried the Insert button and.  and drag-and-drop, but nothing

  Thanks in advance for your help

  In fact, it was something very simple and I forgot, I just need to create a new sequence to the sequence of pulldown-> new sequence or right click on the video and find the new clip sequence

  Thank you for the help

• several resources configured by the access policy, allow multiple set to no

  Hi Experts,
  
  I have a problem with the automatic supply of the resource based access policy Ad and Exchange resource (or any two resources that are dependent on each other).
  
  That's what I'm doing (11.1.1.3 bp2):
  The user of the ad and the Exchange are the two auto-save, auto - prefill and do not allow several. Exchange depends on the AD Server (which assigns the user ad). Based on a rule, the user gets a role, having an access policy giving the user of the ad server and Exchange resources.
  
  Because my AD Server/user implementation updates the user profile during deployment of the access policy is either revalued. At this point the resource Exchange has not any State yet, even if it is waiting on the AD resource to be configured. Accordingly, another Exchange resource is added to a kind of queue, no AD resource yet again in a wait state. As soon as the resource AD is supplied all the wait resource Exchange are provided leading to many Exchange resources.
  
  On a side note, when a resource is assigned manually in the interface web IOM, that once all void tasks are made (or failed) the resource appears on the tab "resources" for a user. I think it would be more logical that this resource is listed immediately to the provision of status. Maybe it's to be able to perform a restore or validation occurs only after all the tasks are performed.
  Bundle 4 Patch did not help at all.
  
  Suggestions are welcome.
  
  Kind regards
  
  Jan Willem Beusink

  Hello

  Thank you, we did the debug more. The real problem was setting a value on the profile of the user, by a membership rule added a user to a different role, leading to the evaluation of access policies. in the process of AD in combination with prepopulators on the Exchange form that take time to complete (a few seconds). If Exchange prepops where not ready before access where assessed to new policies, we got two exchange resources. We solved the problem by using (a variant of) your suggestion leaving the task of Exchange processes a UDF and adapt the rule to check for this field's initial membership.

  Hi low (member of the team of Jan Willem)

• Resource not available for selection in the access policy

  
  Hello

  I'm working on OIM11g R2 PS2 explore all of the new features available.

  I created a resource COMPUTING (SunONE_Resource) for the provision to users of SunONE (using the connector of the OID ) and got users provisioned it successfully asking for it by the Instance of the Application. Now I want to do it Auto-mis in service. So, I created a single policy role and access. But in step 2 of the access policy where we Julie IT resource, my resource (SunONE_Resource) IT is not visible and is the resource available only: LDAP User. I have selected LDAP user as a resource and create access policy.

  But when I'm allocating the specific role of the user, the user does not have configured my SunONE resource.

  I have run the Task Scheduler to assess access policies manually as well.

  Please help me in this regard.

  Kind regards

  Maryse

  Thanks for your quick response.

  I have fixed the problem. The problem was there 2 political access do the same thing. Thus, the system searches for a system property: XL. AllowAPBasedMultipleAccountProvisioning and it has been set to false.

  So, I changed the settings to another AP who was who collide with mine. Then it worked.

• Automatic provisioning using the access policy

  Hi all
  
  I have a resource I would have auto-mis in service to any user who meets the following criteria.
  
  1 UDF1 is a specific value.
  2 UDF2 contains a value.
  
  The only way I know how to do automatic provisioning uses an access that is associated with a group policy. And this group is automatically filled for members using one or more rules. However, I see a limitation with the rules that does not allow my second criteria. You can't have a rule where the value has a wild card. There is no work around for this?
  
  Thank you!

  Three options:

  1 adapter entity that affects the UDF 3rd in a value such as "UDF2 is empty. Change group membership rule to use 3rd UDF.
  2. switch to update the database tables where the rules are stored. Not recommended... but you can get the rules of priority in the speech empty or null.
  2. do not use Group membership rules, get users into groups (many resources). Access policy is based on groups so you don't lose it

• Disable AD account with the access policy

  Hi all
  
  How can I disable AD account with the access policy (or create AD account in the off state)
  
  Kind regards
  Vladimir

  1. when a user is created in the HR system, must create a new IOM account and a new account AD must or must not (according to HR data) be created in AD in the off State

  Can be reached by the access policy but for Disbaled State, you must call turn off the task of the user on the success of Usertask to create in the definition of user AD process

  2. when a user is marked as rejected in the HR system, the AD account if exist, must be deactivated and moved to a special place in the AD tree.

  It can be reached through a custom code JNDI.
  You can move the user to some different containers.
  You can search in OOTB Conector something similar to the user to get around (some adapter)

  3. the same rules will be applied if the IOM account is created or marked as "Rejected" manually by the administrator of the IOM

  Same Setup will work... No need for additional configuration.

• Impossible to the configuration file of the access to the error in XP mode: "is client\users\administrator is not accessible.

  Original title: can not access the configuration file because I'm not the administrator, even if I'm the only person who uses this computer

  I bought Windows 7 Professional on a new computer, because a program that I use every day may run in XP mode.  Configure XP mode and when it asked for a password that I left it empty and press to enter.  When I try to enter in the file config on XP the message "is client\users\administrator is not accessible." You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permission.

  I downloaded the andxp of MS virtual pc mode because this 8 year and plu program will be run in this mode.  I copied the old computer config file and you want to replace the file loaded when I installed the program on the new computer.  Who will save me load all data files (more than 80) and not to recreate the data in these files that I changed. I installed the program from the original disc and it is implemented very well except for the config file.

  There are two user fence: virtual XP-admin and virtual user of XP-88950xp.

  The only program I installed XP mode is this one.

  Thank you.

  Hugh Humphreys

  Hi Hugh Humphreys,

  Leave the password empty section and see if the XPMUSER can be accessed.

  Method 1: If the problem persists, you can try to access Windows XP Mode with the default account named "Administrator". This account appears when we get into Safe Mode. By default, there is no password for this account, and the password is determined when you set up the Windows XP Mode. We can use this account to reset the password of the other accounts password. To do this, follow these steps:

  (a) Firstly, disable the integration features.

  (b) restart Windows XP Mode. When the Boot Menu appears on startup, press F8. (Continue to press the F8 key until the Windows Startup menu is displayed.)

  (c) on the advanced Windows Menu of Options, select Safe Mode and press ENTER.

  (d) log in Windows by using the administrator account and the password.

  Note: The password is empty by default unless you already set a password.

  (e) after the connection mode safe, click on "Start", go to "run", type "nusrmgr.cpl" (without the quotes) and press ENTER.

  (f) choose the user you want to change and click 'reset password'. Set a new password.

  (g) click on "Advanced" tab, click on the button "Advanced".

  (h) click on "users". The choice of the user you want to edit in the right pane. It to the right and click on "Properties".

  (i) check the "password never expires". Click on 'OK'.

  (j) then exit the settings and restart Windows XP Mode to normal mode.

  Method 2: Please try following the steps for the computer to remember the credentials and do not ask the password to open each programs:

  (a) when he asks for a password, click Cancel. Without integration feature, you are allowed to log on with an account that does not have a password.

  (b) set a password for your current user.

  (c) click on tools on Windows Virtual PC, choose enable integration features.

  i. type the password, check the box "Remember my credentials" and click OK to open a session.

  II. after joining the domain, logon in XP mode with the local administrator account.

  Reference: http://social.technet.microsoft.com/Forums/en-US/w7itprovirt/thread/45f3f241-3d0a-43f7-8baf-c64ab3a8a76d/

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/3eba3150-8742-4264-be9f-0daaad2282cd

  If this does not work, post your request in the TechNet forums to get help.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

• Not able to install updates to get the message: 'updates were not able to configure correctly, returning from changes'...

  Original title: I have Vista with Service Pack 2, but were unable to come down and configure updates since 07/12/11. Need help, thank you.

  Do not get the error codes. Just when I reboot, I get the message "updates were not able to configure correctly, returning from the changes".

  Hello

   
  You are able to start in safe mode, then you can perform the clean boot in safe mode and then try to boot into normal mode.
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  If you are able to boot to the desktop after you perform a clean boot Windows check updates history of inforamtion on the updates failed.
  Reference:
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
   
   
   

• Windows 7 not able to remember my settings of the mouse when I alternate mouse

  I have problems with Windows 7 when I plug in 2 different mice at different times.  I take my laptop to work and I plug a USB mouse here at home I plug in a different mouse (the two Microsoft, various models).

  My problem is that windows does not remember the specific settings for each mouse.  When I go into control panel-> devices and printers, I can see that windows detected correctly where I used the mouse.  However, when I right click and go to "Mouse settings" and click on the tab "buttons" 2nd (there are 2 tabs, after you have installed the mouse drivers), the tab from the drop-down menu 'Connected the device' is unchanged: it never gets changed automatically.

  So when I get home, I have to choose my mouse (comfort optical 3000) and choose the right setting for the thumb touches (or "expand button", according to windows).

  When I get to work, the scroll wheel does not work in all applications, so I have to go to settings, then choose the right mouse...

  
  

  Is there anyway I can avoid this clicking repetitive?  If windows 7 should not be able to automatically detect it along for the mouse settings and use the previous settings for this mouse?

  
  

  Thank you

  
  

  Jeremy

  Hey Jeremy,

  This could be due to third party settings and windows settings conflicts. To avoid the same, uninstall all conflicting mouse software.

  Method 1: Uninstall all conflicting mouse software

  If you have any other software mouse that is installed, such as the Logitech software or touchpad, this software can conflict with the IntelliMouse software. To uninstall other software, follow the appropriate procedure for your version of Windows.

  Open programs and features in Control Panel. To do this, follow these steps:

  1. click on start
  2. in the search box, type appwiz.cpl.
  3. press ENTER.
  4. Select the software and then click on uninstall.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  Method 2: Run a "clean" boot, and then reinstall the IntelliPoint software

  Step 1: Restart the computer by using a clean boot

  When you start Microsoft Windows, other software may start with the operating system. These programs may include antivirus and system programs that may interfere with your mouse. When you perform a clean boot before you start the installation, you prevent these programs from starting automatically.

  1. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available).
  3. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  4 restart your computer.

  For more information:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Step 2: Remove and reinstall the IntelliPoint software
  
  1. to do this, follow steps 1-3 in method 1.
  2. click on Microsoft IntelliPoint.
  3. click on uninstall/change.

  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  4. click Yes to confirm that you want to remove the program.
  5 restart the computer.
  6 reinstall the IntelliPoint software.

  You can download the software for your edition of:
  Download mouse and keyboard software

  For 32-bit Windows 7:
  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=mouse&name=D1T-00002&OS=Win7_32&lang=en

  64-bit for Windows 7 driver
  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=mouse&name=D1T-00002&OS=Win7_64&lang=en

  Once the download is complete, install the appropriate software and see if that solves your problem.

  Additional help:

  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091

  Once you have finished installing, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. on the general tab, click the Normal startup option, and then click OK.
  3. When you are prompted to restart the computer, click on restart.

  Does this solve your problem? Post back and we do know.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Not able to download Microsoft App despite the activity child family

  I added my child to my Microsoft Family. It shows as a member in my family account and his account confirms. I got a confirmation email that he accepted my invitation and joined my family. Despite this, it is impossible to download the materials appropriate such as applications and games. Her phone - a Nokia Lumia - gives the following message is displayed when user clicks "Install"

  My family needed configuration. My family needs to be put in place before you can get this app.

  I would be very grateful to help solve it. Thank you very much.

  Hi Annie,.

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that your child is not able to download apps using security for the family.

  I suggest you to refer to the Microsoft Help Article below and check if that helps.

  http://answers.Microsoft.com/en-us/mobiledevices/Forum/mdlumia-mdapps/cannot-download-apps-due-to-my-family-settings/fe7ac25c-8710-45E9-B9B4-cd9dafa7f282

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.