Automatic reconnection to a bluetooth device

Similar Questions

• Phone is not able to reconnect to the bluetooth device after accidentally forgetting the device.

  There are some time I accidentally "forgot" a Bluetooth of my friends when they were connected to my phone.

  Since I have never been able to get them reconnected.

  I checked that my bluetooth works. (I am able to connect to my friends phone, and my headphones are also able to connect to my friends phone)

  I read online messages from others with various other phones that have had the same problems and tried various solutions without success.

  Thank you

  If you reset the headset, and then pair them again?

• Automatic reconnection Plantronics 855 Bluetooth Pre

  I'm having some trouble ensuring that the Plantronics 855 receives a signal from the Pre. Similar to the questions in my Acura TL hands free system. I find myself having to disable bluetooth on the Meadow, and then reactivating to operate. Also, sometimes I will need to turn off the 855 and then turn it back on as well. Have only had it for 2 weeks, so I did not yet understand the trend, but the marriage of pre and BT does seem to not yet be happy.

  Anyone else have similar problems and / or answers to why this could happen?

  Update: my pre was replaced because of the Oreo effect.  This solved all my problems BT with the 855 Plantronics, as with my Acura TL hands free system (except the end key on my wheel by placing the call on hold rather than hang up)!  Must have been a HW question with the original pre or associated firmware version.

  .. .unexpected advantage.

• To automatically reconnect Bluetooth

  Hi, I have a vi that connects to a Bluetooth transceiver and collects and plots / stores incoming data. The connection is initiated by the user on the front panel.  However, sometimes LabVIEW gives me a connection error, sometimes it's once an hour, sometimes it's once every 24 hours, and I have to manually start the connection.  I was wondering if there is a way to design a vi that is always looking for a connection, so if the connection is lost it reconnects automatically.  I see that there is no sample Bluetooth screws that come with LabVIEW (2010), would one of these work?

  Hi baseball07,

  The example of "Advanced Blueooth Server.vi" (go to help > examples > Search bluetooth and it should appear in the list) should be a good place to start. It shows how to connect to several headphones at the same time, using the listener to create function.

  Thus, it shows how to use the Bluetooth to waiting on the listener function. In this example, VI, if you catch an error Connection Timed Out or connection closed, you stop the loop and close. You can change this so that if you receive this error message create you a flag to show that a shift has occurred, but rather to stop, continue the loop outside while Cook waiting for Bluetooth on the State of the listener. As long the device he always tries to connect, you should be able to reconnect automatically on the bluetooth device.

  I hope this helps!

• Several similar Bluetooth devices

  Hi all

  I'm curious to know if anyone has an effective way to manage several bluetooth on their iPhone, particularly similar bluetooth devices.  Here's my scenario specific household:

  I have 3 Bose Soundwave mini in different areas around the House and bring with me to work, a living room stereo system using a logitech bluetooth receiver, stereo room bedroom using a similar receiver and a stereo in my backyard using the Roverbeats Unify bluetooth receiver and another in my garage with a similar Roverbeats receiver.

  Often with receivers, my phone will connect to a receiver in the other room, although it is literally in front of the receiver, I want to associate.  I'm so often or having to choose between keeping the receivers do not use unplugged, by selecting "forget connection" on my iPhone every time and just rematching.  With the mini Bose I have not found a way to rename each different unit which is confusing, as they are all labelled the same in my list of Bluetooth connections (I am able to rename every single unit on my Macbook, but that will still be often confused and have connection problems, making me forget all connections with all minis just reconnect from scratch).  I have every Mini labeled with A/B/C, but do not have a way to differentiate one on my iPhone.

  So, basically, I feel constantly forget liaison and/or keep some receivers unplugged.  Has anyone found any bluetooth utility function simplified to establish connections rename / prioritize?   I have an iPhone 5 9.3.2.

  The name change you make on your computer just the fact it not on the device BT itself. Because there is no user controllable files management, there is no similar to iOS functionality. I don't know of any utility that will help you. The only thing I could suggest is turn off BT devices and turning them on only when you will contact them.

• HP Jet 7, 8.1 Win Win 10 update and Bluetooth "devices errors."

  I did the upgrade from 8.1 to win to win 10.  So far, I've noticed all my devices Bluetooth "devices errors."  I have deleated all BT devices and tried to charge the BT device to my soundblaster roar 2 and a simple generic keyboard and I got the same results. I have tried reconnecting with other devices.  Did someone went down this path? HP, Microsoft, suppliers... has a driver upates?  I have not read on win 10?  Device Manager will be my frined here, deleting and reloading BT associated drivers?  What do you say?

  Hi, Yes, my bluetooth mouse works fine on my Stream with 10 Windows 7, device drivers are available from hp.com.  You could try to reload the driver bluetooth of Windows 10.

• HP Pavilion 2201TX G4 isn't close to bluetooth devices

  Hello

  I use HP Pavilion laptop 2201TX G4, OS is windows 8.1. My laptop is not able to find all the devices (mobile phone, bluetooth speaker). and at the same time other bluetooth devices (laptops, mobile phones, etc.) can not find my cell phone no more. Please help me.

  Thains,

  Amit

  Hello, @Amitvijay 
  
  Welcome to the HP Forums.
  
  It seems you are trying to use bluetooth on your laptop. That your laptop can not see devices and those devices are unable to see the laptop. I will try to help you with this.
  
  I would like first to provide you with these documents as reference sources. They have measures that may be able to help. Please use the documents first, before any other action is attempted.
  
  The problems of Bluetooth
  Using Bluetooth (Windows 8) devices
  
  To go with those who are here other steps you may need to try:
  
  (1) ensure that all Windows updates are completed.
  (2) updated bluetooth driver, use it Support Assistant HP.
  (3) test
  
  If it has the same results try:
  
  (1) go to the Device Manager.
  (2) right click on the Bluetooth device you want to
  (3) choose uninstall
  (4) restart the laptop

  (5) test of
  
  If this did not help, next update of the BIOS . If this doesn't help not continue below.
  
  (1) go to the Device Manager
  (2) right click on "Bluetooth device" you want
  (3) select "update driver software... »
  (4) choose "Browse my computer for driver software".
  (5) choose "Let Me pick from a list of drivers for devices on my computer.
  (6) select "Ports (COM & LPT)"
  (7) select "Microsoft" to the list of "manufacturers".
  (8) finally select "Standard series via a Bluetooth connection.
  
  If you are unable to connect to a Bluetooth device, try the following:
  
  (1) search for 'Change device' in the start menu in Windows 8.
  (2) click on where it says change device installation settings.
  (3) select No, let me choose what to do option.
  (4) check the automatically get the device app option
  5) click Save to save the settings that you have just selected
  
  So, you can try this
  
  1) go to RUN (Windows Logo + R) and type "services.msc" and Enter
  (2) now find 'Bluetooth Support Service' and double click it
  (3) now, click the Log on tab and type "Local Service" without the quotes
  4) click on "account".
  (5) now remove any authorization of passwords the password field blank
  (6) underneath the left superior title should be a hyperlink 'Start' click
  
  If you meet all of the above and still cannot see a device or connect with bluetooth, it is more than likely a hardware problem. Please let me know how you get in the steps. If you need assistance with something let me know.
  
  Thanks for posting on the HP Forums.

• Y530 + Win 7 - no bluetooth device found

  Hello

  My Y530 originally supplied with Vista, but I upgraded to 7 (as could get it for free from MSDN AA).

  Bluetooth WORKED FINE with Vista, but now there is no way I can activate it. I downloaded and installed all the drivers Win 7 and the Lenovo Web site software (except driver BT, as it is said there is 'no bluetooth device detected' and I shoul turn it on). FN + F5 poster WiFi card only, also no BT in Control Panel device. What can I do?

  PS. I'm starting to miss my old T41 where everything worked fine, just the way I needed. Y530 is full of annoying features (not to say 'stupid'), with Lenovo Power Management as the first of them :/

  I use the 32-bit version of Windows 7.

  Meanwhile, I managed to solve the problem. When I was running my laptop for the first time after bringing it in a store, I noticed that this lamp wireless was pink - which means that BT was active. So I went to the BIOS and brought back to the default settings, that works then BT., I started the system and it automatically installs the driver. To be sure that everything is compatible with the power management, I also installed Lenovo for the BT software. After that Fn + F5 shows the device and everything seems to work OK...

• I want to pair a speaker, but there is no icon of Bluetooth devices in Control Panel

  I want to pair a speaker, but there is no icon of Bluetooth devices in Control Panel

  Hello

  1. which version of the service pack is installed on your computer?

  2. don't you make changes to the computer until the problem occurred?

  Method 1: Check the status of the Bluetooth support service:

  a. to open the snap Microsoft Management Console (MMC) for Services in Windows XP, click Start, click Run, type services.msc and click OK.

  b. double-click the Bluetooth Support service.

  c. If the Bluetooth Support service is stopped, click Start.

  d. in the startup type list, click Automatic.

  e. click the log.

  f. click Local System account.

  g. click OK.

  h. If you are prompted to restart the computer, click Yes.

  Method 2: Check the settings below:

  a. right click on the Bluetooth in the notification area icon and then click on view the Bluetooth settings.

  b. on the Options tab, click to select the discovery of the Tower on the checkbox and then click on apply.

  c. to enable Bluetooth devices to connect to your computer, click to select allow them Bluetooth devices to connect to this computer check box and then click OK.

  Method 3: If it's Windows XP Service Pack 2 then I suggest you to see link below and check if it helps.

  How to troubleshoot Bluetooth detection and connectivity problems in Windows XP Service Pack 2: http://support.microsoft.com/kb/883258

  For your reference: How to install and configure Bluetooth devices in Windows XP Service Pack 2: http://support.microsoft.com/kb/883259

  Hope this information is useful.

• No icon of Bluetooth device in the control panel of my Windows xp sp3

  I can't install the bluetooth mobile phone because there is no Bluetooth device icon in the control panel. I use Windows xp sp3. Can someone tell me what I need to do?

  Hi naturalmente.

  What is the number and the model of the device you are trying to connect?

  Check the conditions below are true:

  1. If there are several Bluetooth devices connected to your computer, temporarily remove the devices you want to solve not. If there are other USB devices, try to remove all USB devices that you do not have to be installed during the troubleshooting process. If you have several devices that are connected using USB, this can interfere with a Bluetooth transmitter/receiver.

  2. check that the Bluetooth device that you want to solve is turned on and that it is enabled.

  3. check the status of the Bluetooth support service:

  a. to open the snap Microsoft Management Console (MMC) for Services in Windows XP, click Start, click Run, type services.msc and click OK.

  b. double-click the Bluetooth Support service.

  c. If the Bluetooth Support service is stopped, click Start.

  d. in the startup type list, click Automatic.

  e. click the log.

  f. click Local System account.

  g. click OK.

  h. If you are prompted to restart the computer, click Yes.

  4. search for the parameters below:

  a. right click on the Bluetooth in the notification area icon and then click on view the Bluetooth settings.

  b. on the Options tab, click to select the discovery of the Tower on the checkbox and then click on apply.

  c. to enable Bluetooth devices to connect to your computer, click to select allow them Bluetooth devices to connect to this computer check box and then click OK.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• No discoverable Bluetooth device

  Original title: I can't get my blue tooth on my PC to be visible, he says it's perhaps unplugged I don't understand

  I have a dell 420 xps it says I have tooth blue when I check to make it discoverable, it says it's perhaps unplugged when I click for good there is nothing there.

  Hi michael paul ohlenkamp,.

  1. which Bluetooth device do you use?

  Method 1:

  Make sure that the Bluetooth function is started.

  a. Click Start, type services.msc in the search box and press ENTER.

  b. in the list programs, click Services.

  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  c. double-click the Bluetooth Support service.

  d. If the Bluetooth Support service is stopped, click Start.

  e. in the startup type list, click Automatic.

  f. click OK.

  g. If you are prompted to restart the computer, click Yes.

  Method 2:

  You can also check the following link and try to run the troubleshooter and check

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  See the following links for more information:

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Change settings for a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-a-Bluetooth-enabled-device
  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• No sound playback in stereo Bluetooth device

  Original title: could not get the sound through bluetooth, ToneWorks test but no sound plays

   

  I'm trying to activate my Bluetooth stereo audio but am unable to get the sound to transfer, the test tone works on my device but I can't the music or any other audio to play on the device?

  Hello

  1 did you do changes on the computer before the show?

  2 have you installed a particular software for stereo Bluetooth device?

  I suggest you to see the site mentioned below:

  The audio output is not automatically routed to a Bluetooth audio device on a Windows Vista-based computer

   

  http://support.microsoft.com/kb/933144.

• Hi__I have acer extansa laptop 5635. I installed Windows 7 in there. I am facing problem on bluetooth device drivers. How do I get the bluetooth device driver.

  every time I help out to fix this problem, it search for it and then he said: this bluetooth device driver is not installed. Install the last jerking for the device.

  After that, I click option

  apply this hotfix

  then he begins to search for, but after a few seconds it gives an error that

  device not found driver.

  Please help me solve this problem. I will be thankful to you.

  Hi Fadi,

  If Windows is unable to install the drivers automatically, then you will need to visit the Bluetooth device manufacturer site download and install the drivers manually.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Looking for drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• error code 19: bluetooth device does not properly

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  is my problem in the laptop of dell inspiron n5110
  Please help me

  Hello Nidhi,

  
  Which device Bluetooth are you facing problem with?
  This error code means Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. To resolve this problem, you can first try running a Troubleshooting Wizard. If this does not work, you must uninstall and reinstall the hardware device.
  Method 1:

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2: See also the link below: (not the valid link also for Windows 7)

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note: article also applies to Windows 7.

   
  Method 3: Update drivers:
   

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Method 4: Refer to articles:
  
  Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

   
  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer
   
  Note: Article applies to Windows 7 too
   
  Let us know if you have other questions about Windows in the future. We will be happy to help you.

• Service error battery Bluetooth connection problem and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device ".

  Original title: Bluetooth connection problem

  I have a bluetooth Jawbone headset which worked fine with my Dell studio 1458 until a month or two ago. I am running windows Home premium 64-bit. Now the device will connect is more to the laptop. I get an error to the stack service and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device"I returned to you can restore point, but the issue is not resolved. All solutions?

  Hi Trainfan1,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Run the tool and troubleshooting hardware devices.

  Method 2: Check the drivers and the Bluetooth Support service.

  (a) click Start, type services in start search box and press enter.

  (b) Services for window open find Bluetooth Support Service and double-click it.

  (c) ensure that the service is both the value Automatic for Startup type and started for the State.

  (d) click Start, type Device Manager in the start search box and press enter.

  (e) to search for the Bluetooth device expand it and double click on the driver.

  (f) go to the tab driver and click set to update driver to update the drivers.

  (g) if the problem is still even try to Uninstall and reinstall the drivers in the same tab by clicking on the option Uninstall .

  Method 3: Remove all Bluetooth components and reinstall it from the manufacturer's Web site.

  Install all necessary software required for Bluetooth device work properly.