sound on laptop lost when it is connected to the docking station

Similar Questions

• W540 Freeze on boot screen, when it is connected to the docking station

  Occurred when docked to a docking (so far)

  OS - Windows 7 Pro 64

  BIOS 2.24

  
  

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• Venue 11 keyboard connected to the docking station

  The place of meetings 11 keyboards can communicate with the Tablet when it is in the docking station?

  With the way the place of sessions 11 is in the docking station, it would be quite difficult to have a connected keyboard because he wouldn't level with your office.  If you use the docking station, shouldn't you already have an existing configuration of the Office you can take the keyboard and mouse of?

• Two external monitors can be connected to the docking station?

  Is it possible to connect two external monitors to a docking of HP 2740? If so, how it is with 1 single VGA port on the docking station. The tablet which is embodied is a HP Elitebook 2760P.

  Yes, you got that right.

  He landed again until what's available / condition on the 2nd external monitor. These days most of them VGA, HDMI and DVI while that few of them have display port too.

• T410 does not connect to the docking station

  I have a Lenovo T410 and a docking station 4338. When I tried to join the computer to the docking station last night, he would not go. I don't see any obstruction or something wrong with the plug on each unit; the computer can't accumulate up as before.

  I have another station host I can try, which should help to determine which device is the problem, but I won't have access to him until next week.

  Have someone has encountered a problem like this? Any suggestions to correct?

  I compared the two docking stations and identified the problem. There are two plastic hooks built into the base, one to the right of the connector, one left and below. In a station works correctly these hooks are discarded because the computer is inserted, then spring back, now in place.

  On my post of malfunction the hooks were stuck, prevent the computer from insertion.

  I was able to fix the problem by pushing hooks with my finger, which take them off. If they stick once again I can try a Lube graphite.

• Satellite C660-1DK overheating when you are connected to the dynadock station

  Hello

  I recently bought a Dynadock U10 (PA3575E-2PRP) docking station, to get a great full how to use my laptop 3. No luck, perfect functioning of Sony and Nec, Toshiba C660-1DK don't: (o)

  OK, I noticed that the C660 is not in the list of laptops supported the Dynadock.

  In any case, there must be something for a Toshiba laptop? So here's the snippet:

  -configuration (with the latest drivers online) and connection beetween Dynadock and C660 smoothly
  -After a few minutes, running fan a cooling of laptop fires throtlle full speed.
  -to 70-degree temperature, C660 stop automatically.

  My OS is Windows Seven 64-bit original.

  Thanks for any help that you could provide

  Bests

  Stéphane

  Hello

  Dynadock is certainly supported by C660. So this shouldn't be a problem.

  > After a few minutes, running fan a cooling of laptop fires throtlle full speed.
  > 70-degree temperature, C660 stop automatically

  Check that the cooling modules are free of dust. Dust affect the performance of module cooling and this could lead to a higher temperature.
  Spray with compressed air to remove dust from the fans.

  The use of graphics drivers from Toshiba is also very important! Drivers Toshiba supports the overheating protection so you need to check if the use of drivers Toshiba could help!

• HP Probook 645 G1: Turn off the wifi when it is connected to the wire

  Hello

  I have a HP 645 Probook G1 A4 - 4300 M / 4 GB / 500 GB SSD/DVDRW/14 "HD/W7P 64B latptop.

  I also have a model Dockingstation REPLACEMENT-I10X.

  I have attached an ethernet cable on the docking station that works. My problem is that when I connect my laptop to the docking station. Get a priority above wired wireless. If the laptop still uses wireless unless I turn it off manually.

  Ofource I want to log out manually. I want the phone choose wired when wired and wireless when wireless.

  I tried a couple things:

  1. I went setings adapter--> advance--> Advance settings--> moved the connection to the lan network to a network connection wireless, top of page bottem. it did not work

  2. I manual put several metrics in connection properties (internet protocol 4 & 6--> Properties--> Advanced--> change automatic metric to manual and filled a small number to wired connection (No. 5) and filled a higher number (No. 250) to the Wi - Fi connection.) it did not work

  3. looked in the bios menu. There is no option to change the priority or something like that.

  Now, I always disconnect the wifi when I'm attached to the docking station (even tried plugging an ethernet straight cable to the laptop, but that has not helped either). Problem is when I unlock the laptop from the docking station, I have to manually reconnect to the wireless network.

  Additional info: since my laptop is always closed when it is locked on the docking station, I cannont press the WIRELESS button to disconnect or connect.

  Any suggestions help would be greatly appreciated.

  Hello:

  See if the BIOS of your laptop computer has a LAN/WLAN, commissioning.

  On my HP Elitebook 6930p it is a parameter to enable the LAN/WLAN switch that automatically turns off the wireless card when an ethernet cable is connected, and vice versa.

• Tecra M5 - crashes when you use the docking station - fan at full power but no start the thread

  Hi all

  As I say, I have intermittent problems where the machine crashes when you use the docking station. Sometimes at the beginning of the startup of windows then stalls and powers of fan at full power. If I take off the base of the machine, it works fine.

  I bought this machine because I had one in my previous job and he had found great. However, my only previous also had this problem sometimes when lashing...

  Any assistance received very warmly.

  Thank you!

  Hello

  Stand by. You have noticed this behavior when the laptop is OFF, connect to the docking station and after doing this you turn. Am wrong me or have I misunderstood something?

  Maybe's external screen connected to the docking station?

• No sound on HDMI when connected to the Dock among

  Hello

  I am facing a problem with the HDMI Audio output when my ThinkPad Edge E531 connecting to my TV via my among Dock.

  The HDMI connection is established and video works fine. However, I can not all sounds for the TV speakers (I use external speakers, but already disconnected those test - no difference).

  When I connect the HDMI directly on the ThinkPad cable, video and audio work perfectly. A configuration previously used with a LG monitor that has a HDMI output input and speaker works fine as well.

  Active audio devices:

  The TV that is connected to the Dock from among:

  SAMSUNG (Audio device high definition)

  Connected TV ThinkPad:

  Digital audio (HDMI) (Audio device high definition)

  More info:

  8.1 Windows x 64

  Intel HD 4000 graphics driver 10.18.10.3412

  graphics NVIDIA GeForce GT740M 9.18.13.2762 driver

  Any help would be greatly appreciated.

  Try to install the latest Intel graphics drivers since the Lenovo support site relevant to your computer. When asked leave to replace the automatically detected drivers (usually newer). It worked for me. (on Thinkpad Yoga)

• When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  Hello

  With Docking Station, you can connect all the cables for printer, keyboard and mouse, adapter directly to the charging station.

  So whenever you use a laptop, you have just dock the laptop on the docking station and not need to re connect all cables again.

  This will help you when you move frequently with the laptop.

  Docking station will save your time, outside any other aspect, that it has to offer.

  Zaki.

• Hai, my ipod shuffle when it is connected with the computer, it flashes organge light.  If I don't take no light

  Hai, my ipod shuffle when it is connected with the computer, it flashes orange light.  If I remove without light and music.  Even I kept connected all day with my laptop for charging.  But without success.  Is it possible to change the battery?

  If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem reoccurs after the restoration, it's probably a battery worn.  Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small.  Not easy to work on.  This web site has repair guides

  https://www.iFixit.com/device/iPod_Shuffle

  and parts are available from sources like eBay.

  Apple 'serve' the shuffle, if it's the 4th gen (current type).  Rather than change the battery of your device, you get a replacement unit.  According to this document, out-of-warranty fees are $39

  Pricing of the Service - The Apple iPod Support

  NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.

  The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.

• Satellite Pro C70 - could not get the image when it is connected to the projector

  This machine has been purchased for use in the classroom with projector and smart board. When it is connected to a monitor, the second screen works fine, but when it is connected to the projector DLP Epson, the computer screen and the projector are the two laptop PC empty of other manufacturers of work correctly when it is connected to the projector.

  Can you help me?

  Message has been modified: name of the laptop has been added to title

  What laptop do you speak?
  .. .and what operating system is preinstalled on this laptop?

  You use the pre-configured Toshiba system?

  Is the resolution of the screen for both devices (display and external monitor) set correctly?

• gen64.exe Malware when it is connected to the internet

  My desire to HP dv6-7206tx with Windows 8.1 has a problem when it is connected to the internet. An application named 'gen64.exe' makes the CPU to run at 100%. And Microsoft Security Essentials doesn't pick it up as a malware. I checked on the internet to confirm that it is a malware. Please help me. I have no idea how he broke into my laptop.

  Hello

  There are many programs for cleaning system of malware, adware etc which would suggest Members here.

  I like this one to detect & fixing malware: https://www.malwarebytes.org/mwb-download/

  Update latest version & tick "Scan rootkits" before starting the analysis.

  After the scan, quarantine the detected objects. Restart the system. Yet once, open the Malware Bytes program, go to the history tab in there: remove all quarantined items from there

  Restart the system.

  Open the prompt as administrator, do a SFC SCAN, check if integrity violations are:
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Concerning

  Visruth

• I installed Windows 7 (64-bit) on my HP laptop. When I open a wizard, the point of the mouse frequently goes to the office.

  Hello

  I installed Windows 7 (64-bit) on my HP laptop. When I open a wizard, the point of the mouse frequently goes to the office.

  Example: If I type a URL in Internet Explorer the mouse point is for place in rear window (desktop) and I need to click on the URL bar to continue writing. It's frustrating to work.

  My first level of troubleshooting:

  Re-1 display drivers).

  (2) connected in safe mode and watched 5 minutes and has not seen the question. Seems the problem occurring in normal mode only.

  Thank you

  Vicky

  Hi Niranjan,

  Thanks for your reply. I tried some troubleshooting steps today morning and find the root cause of the problem.

  The problem with the driver for keyboard and mouse, so I uninsatlled form the machine. After the reboot, the problem disappeared, but my point of the mouse works slowly in any case I'm looking for the latest driver :)

  Thank you

  Vicky