Automation/macro a hearing process

Similar Questions

• Automated row Fetch failed when two forms on one page

  Hi guys,.

  APEX 4.2

  There are two forms on a single page (page 11) so that I can update two tables at the same time, I'm sure that I transferred a primary key that is appropriate for the two 2 forms.

  and various automated line created, extraction process

  Table1, primary key ID, element contains the primary key: P11_ID

  table 2, primary key ID, element contains the primary key: P11_ID_1

  When I ran to the page, the error occurred

  "ora-01403 no data available.

  in table2 fetch process

  Please help me find the reason, why can not extract the correct line to table2.

  Best regards

  Yong Huang wrote:

  Hi fac586,

  Thanks a lot for your quick response.

  In fact, at the beginning I used the process generated by the wizard to create one, but deleted when the error occurred, then I manually created once again, but still the same error.

  What do you mean by "created once again manually? The process of manipulation of data can be created using the wizard. Do you mean that you copied an existing one?

  Maybe I can repeat what I said above more clearly:

  It is not possible to have more than 1 set of the ARF/ARP process or Manipulation of MRF/MRU data on a page. Form region only one per page can use automatic data handling processes. Line fetch and process DML insert/update/delete for the areas of additional forms must be created manually using PL/SQL.

  Is it now clear?

• FDQM event AftValidate() returns 'bad' State of process

  Hi all
  
  We are implementing a custom code to be executed after the validation in FDQM stage. The code is supposed to create a log record in an external DWH, including information, if the validation success or failure.
  
  We use the same AftValidate() function to execute our code. So far all works fine (we can create record successfully in the DWH DB) with the exception that the status of the function of parameter 'lngProcState' (to Alternatively we recovered the status with the following statement "API.) MaintenanceMgr.fProcessStatus (API. POVMgr.PPOVLocation, API. POVMgr.PPOVCategory, API. (' POVMgr.PPOVPeriod) .lngStatus ") provides the value 11, which stands for a successful validation, even if the validation fails.
  
  We conducted several tests to find the source of the problem and of the possible workarounds, but unfortunately we do not have yet. What we have discovered so far is the following:
  
  -At the time, AftValidation() is running the State of the process seems to be "11".
  -Once the list of validation errors were displayed the status of the process (which we recovered in another script) is "12", which is not correct
  -If we try to display the value of the status of the process current (using 'RES. PlngActionType = 6 "or"RES. PlngActionType = 2 ") in AftValidate(), we do not get a popup window
  -However, writes the value (which is '11' instead of '12' at that time) to Records DWH works perfectly well in AftValidate()
  -If cause us an automation error when writing code in AftValidate() nonsense, appears error automation, apparently the validation process everything is interrupted, without window popup with the list of validation errors is displayed and the validation icon is orange (!), indicating wrongly that the validation process has gone through successfully
  
  Have a look at these indicators it seems to us that first the function of the AftValidate() event is executed and that the State of the process is "11" during this time, and after (!) that the AftValidate() function has been executed to the list of validation errors is displayed, and the status of the process will be changed to "12". This can hardly be right and we're desperately looking for a solution to our problem.
  
  Your help in this matter is highly appreciated.
  
  Best regards
  
  Ruben

  Do not start the validation of the intersection. If you have the turned on in the settings for the integration of the adapter FM it will run automatically. He runs after the AftValidate() event. If you want to capture/Journal of an intersection failed check, you must do this by customizing the Action script itself.

• Flash Player: How to get the automated audit and reporting to work after a failure to update.

  I've implemented the program Adobe Flash Player in my computer (Windows 7 64-bit SP1) to check and warn me when there is an update.

  I got a notification about a Update April 15, 2013. I had updated the Flash Player program several times with these notifications in the past. This time when I clicked to download the update, it did not download and I got a message on an error.

  Since the last update of Flash Player, there are two changes in my computer. IE 10 is new as I installed it with the updates I get from Microsoft. I also installed Norton Internet Security. My guess is that Norton Internet Security do not allow the download to continue and complete.

  Later, I found the following entry in my windows logs.

  Log name: Application,.

  Date: 15/04/2013.

  Name of the failing application: FlashUtil64_11_6_602_180_ActiveX.exe,.

  version: 11.6.602.180,

  The failed module name: ntdll.dll,.

  version: 6.1.7601.17725,

  Exception code: 0xc0000005.

  Offset: 0x00000000000532d0.

  Now, I think I got to stop Norton Internet Security before I run the Flash Player updates.

  I have read the Adobe installation issues page " http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html "
  
  

  and based on the information at this site, I checked and Active scripting in active under websites and trust.

  I have three questions.

  1. why I don't get the notification again? Is there something written in a file or a place I need to clean or remove that control automated and the notification process to rework? What should I do to have automated verification process to work again?

  2 if I download the latest version from the Adobe Web site, do I need to uninstall the currently installed version of the control panel-> programs, and then install the new version or the installation of the new version first uninstall the currently installed version? What is the URL "[http://get.adobe.com/flashplayer/ | ]. http://get.Adobe.com/flashplayer/ ' [ ] ' to use to get the most recent version?

  3 in the Adobe installation issues page, I see the article and the following link: progress bar freezes while downloading / unable to connect to the server / unable to download metafile and the proposed solution is to download the Adobe Flash Player installer directly using the following link. "[http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_ax.exe | ]. http://download.Macromedia.com/pub/flashplayer/current/support/Install_flash_player_ax.exe ] "what is the difference between installing a new version (issue No. 2) and the download of the installer? That's what I have to do?

  Thank you.
  

  Right-click on a swf file (for example, on youtube.com), click global settings > advanced > change update settings.

• RoboHTML - automation with maven

  We have automated the generation/deployment process to help using a combination of maven and CVS. Everything was working fine until one of the authors has introduced variables. We run RHTML 8.0.2,

  and by using only default defined Variable. When we produce locally (RHTML UI or command line), the output shows the substitution of variables. However, when we generate

  using mvn package or mvn deploy (which creates the help.war and put it in the right place for the construction of system), the substitution of variables breaks. We checked the sttings.xml

  revised the pom.xml to try the different ways to run the compiler WebHelp via maven. The rhvariables.apj file is located in the directory with the XPJ file (and other apjs). Any help would be greatly appreciated.

  After a lot of testing, I came across another Post in the forum that actually provided the solution-

  User-Defined Variable update does not generate the layout

  The project was imported from an older version of HR and none of the older subjects had a master page assigned. I loaded the page from the Master project to some of the older subjects who have variables, revived mvn package to get a war of local help file. When I looked to the release of maven, the variables have been correctly replaced. If anyone understands why RHCL launch from the UI RHTML or from the command line gave the substitution of variables very well even when running maven, he doesn't, please post here.

• Program LabVIEW will hang between 33% and 50% of the time.

  I have a problem with a Labview program, I did. I have two programs that do the same thing. One is as a flat sequence, and the other is in the form of State machine.

  As explained in the link below, I would like to use a microcontroller to perform wiring for automation of a measurement process. A separate current source and volt meter will be used.

  https://forums.NI.com/T5/LabVIEW/sequence-a-good-idea/TD-p/2601333

  I did some simple test programs that I join since then. The problem is when running, that the labview program crashes, but not all the time is to run the program.

  For example: Hall 1.2.vi will correctly work twice with the third time, he is executed, it crashes. If Cancel you and try again, it will run again twice without any problem with the third hanging. It is in the flat sequence format (was in a flat sequence, but merged windows because I thought that was the cause). From what I can tell, the program crashes when calling Keithley 6517 unique Read.vi. Two connected Keithley devices are connected to the computer via GPIB to 16 and 27. The way I checked if it was this vi the cause or contributed to what I deleted the program never hung and it. I find it very strange that it crashes exactly on the third attempt every time.

  Simple.VI Hall 1.3 will work the first time and hang the second time. If it works 50% of the time. It is in the format of State Machine. It hangs in the case entitled "Measurement 1" that contains the Keithley 6517 unique Read.vi.

  I used the running highlight button and watched the program to run. Curiously, it only crashes when you use this button. So I tried to add some delays/waiting in different places without success.

  This could be the cause? As a side note, I say that the program is suspended for two reasons. The principal is the program does not run so the execution arrow is always black. The second thing is that if you notice at the end of the labview program, I have a block he who turns to the power source which does not happen when it crashes. I have to turn it off manually, and then click the abort program button to stop labview.

  
  

• How can affect a false button when another button is released?

  As I\m a beginner of LV, can someone please help me with this stupid question? Is there an easy way? Thank you!

  for the acquisition of the image, there are 2 buttons, "follow" and "enter".

  "Snap": switch to release, press once, it would be autom. released when the process finishs.

  'Grab': when you press. Press once will direct mode, and push again will it stop.

  So if I click on "grab" and click on "snap" without first stopping the 'grab', then after snap over process I click again on the clip, and then error comes because the 'Grab' is always true...

  I don't know if I made myself pretty, clear., but the help...

  Chao

  Thanks everyone, I basically solved the problem by using the structure of the case, see the picture.

  I think there must be some better ideas, a simple way. I hope they were coming to me later.

  PS: How can I put my question 'solved '?

• WIP330 - What's up with this phone?

  I just got the phone SIP Linksys Wireless G (WIP330). I was intending to use this phone for our new Asterisk based IP telephony system. Setting in the phone service was child's play, but there are weird things on this phone that make it almost unusable for anything other than her overhaul.

  Problem - a voicemail

  There is a section voicemail under phone settings where you can enter the phone number to your voice mail. Very well, very well. For once I enter my voicemail number, how to retrieve my voicemail? There is nothing in the documentation or in the phone settings that says how we are supposed to retrieve voice mail, once we enter this number. Shouldn't there be a big friendly button somewhere marked voicemail?

  BTW, the documentation of Linksys says this about voicemail, "to learn how to check your voicemail, call your service provider internet phone! You have to be kidding me?

  Problem 2 - No touch tone.

  Since I can't find a button or anywhere speed dial to call my voicemail number. I entered in manually and called it. The problem is, I have to be able to conclude the numbers on the keyboard to access the features of voicemail. If I enter numbers in the keyboard, a separate window will appear showing the numbers, but there is no beep button so that the menu of automated voicemail can 'hear' my selections. I guess this new window is line 2 try to accept another outgoing call.

  These two questions are a deal breaker real for this phone. Here are a few other minor problems that I could live with if this phone solved the above problems.

  • Strange button above the buttons volume control that does absolutely nothing! Are you kidding me?
  • Micro browser. I don't see how this would have no practical use whatsoever. Unless you went to a Web site that has been optimized for the small screen on the phone, it is useless to you try to display a normal Web page.
  • The maximum ringer very quiet. I admit there is a vibration function, but it would be nice to have a ring loud and clear (customizable ringtones would be a plus also)
  • Update website link is broken. www.WIP330.com does not yet exist. Give me a break!

  This phone really has great potential. It seems to be well built. The screen is bright and easy to use. Dial numbers is easy and receive calls works fine. I like options blind for the transfer, transfer, etc.. But the issues mentioned above will stop me buying more of these phones for my company.

  I thought about it. I watched the Asterisk CLI to find errors and when I composed 770 (my voicemail extension) it prompted me to an extension. I entered my extension number, followed by the pound sign. I could see in the output from the CLI, what she actually accepted my extension and then waiting for the password, but for some reason that the automatic reception never says "password". So, basically, you do not hear the password. I'll have to put spaces in the password prompt and see if that helps.

  Anyway, thanks the help of all the world. This phone can be useful after all.

• How do I disable my account user, password in Windows 7 Pro

  I want to disable password on windows 7 Pro, I have no need of a password. The problem is that the program asks you to turn it off, the 'old' password that I do not have. How to get around this problem and be able to disable this feature.

  Welcome!

  Although the topic says How to disable my user account , I understand that you really mean How to remove my account password.

  I guess you automated your connection years process so that you do not need to enter a password. Fortunately, you can reset this password long since forgotten as follows:

  1. Click the start planet.
  2. Type cmd.exe in the search box.
  3. Press Ctrl + Shift + Enter
  4. Click on "Run as Administrator".
  5. Type the following command exactly:
     NET user "user %%nom" ' "{Enter}
     (this will reset your password for a white)
  6. Type the following command:
     Control UserPasswords2 {Enter}
  7. Check the box "users must enter a user name...". »
  8. Click on your account name.
  9. Uncheck "users must enter a user name...". »
  10. Click OK
  11. Leave the fields blank password and click OK.

  Don't forget to mark my reply as 'response '.

• Each key frame animation

  Hello everyone.

  I have an Audio Clip, I can easily use the Razor tool, cut it into several pieces and put each piece in different layers, and apply different effects in each layer. But if I want to have only a single clip and apply each effect for each Key-frames, can I do?

  Thank you

  To a certain extent, you can do this by using the feature of tracks of automation at the hearing.  This draws an additional 'track"less than audio and allows you to use keyframes to change the parameters of the effects.

  However, in most cases if you use totally different effects on different sections, it is probably easier to work with than you already and use the Razor tool to split your way upward into several clips.  Note that you do not need to drag each section to another track (layer).  Instead, you can change the selection box at the top of the Rack of effects of 'Follow the effects' to 'Effects Clip' that allows you to have the settings of different effects to each clip on the same track.

• Creating a template question

  Hello

  We have a user account OEM 12 c and we give the following rights for the normal user. But the user becomes "You don't have sufficient access to perform this operation" when the model of surveillance...

  1. assigned roles: -.

  EM_ALL_VIEWER

  EM_PRE12CR3COMPATIBLE

  EM_TV_DESIGNER

  EM_USER

  PUBLIC

  2 Grant read-only privilege connect target

  3. privilege of resources

  collection of models

  model

  report

  Please help me to solve this problem and thanks in advance.

  Hello

  to allow a user to Enterprise Manager to perform a specific activity, you should generally grant a combination of resources and target the privileges. In this case, I would try the following privileges:

  Privilege of target: manage the metrics of target (also included in the privilege of target 'Operator' and 'Full')

  Privilege of the resource: surveillance model visualization (also included in the 'complete surveillance model')

  If your target is a member of a group of Directors and included in the automated monitoring model synchronization process, you might also get Error Messages, if you try to manually apply a control template.

  Kind regards

  Tom

• Batch in PSE 14 with the plugin

  I have 14 items running on 10 64-bit windows, I installed the plugin Imagenomic Noiseware, that works very well. I'm trying to batch processing and automation under the file menu is not active and is grayed out.

  The instructions of Imagenomic 2 options, or which is active in version 14.

  norms777 wrote:

  I have 14 items running on 10 64-bit windows, I installed the plugin Imagenomic Noiseware, that works very well. I'm trying to batch processing and automation under the file menu is not active and is grayed out.

  The instructions of Imagenomic 2 options, or which is active in version 14.

  The instructions you saw are for the full Photoshop, not for items. In the elements, the 'Automation' feature does not process batch files. It is only used by a few Add-ons to run scripts. The command 'treat multiple files' in the elements cannot be used to batch with plugins.

• Subliminal records.

  I tried to make the subliminal records.  However, when I try to superimpose the subliminal track, cross-country is crushed and disappears. I tried different ways to do this, but the same result. Help, please!

  Probably the best thing is for me to describe the basic in the hearing process. It is not that difficult and it should work for you.

  If you have two files to a CD and they are saved on your computer, and then initially what you must start a new multitrack session. The default value 'none' model of session will be just fine for this. It doesn't matter what you call, although you might want to put something appropriate. Then in the pane files left, you need naviguer navigate in your two files, then open them. The screen will change to waveform, but don't worry-you can spend by selecting "Multitrack" at the top of the screen.

  Now drag all of your files to a separate track - no matter who's who, but I suggest music on track one and voice on track two. Make sure that they are both positioned at the beginning of the track. Now, if you press 'play' (space), the two lines must play simultaneously. The next thing you need to do is to open the mixing table. You will find a slider track, and you will need to reduce the level of the spoken word track at an adequate level.

  When you have it sounding like you want, go to multitrack > mix session in a new file and your tracks will be converted into a single track, and it will automatically open in the waveform. All you have to do now is save it as something decent, and you are done - at least initially.

• Relocate DC using MRS?

  Hi people,

  Currently, my company has 2 data centers. One in New York and one in MY. A decision was made to close the data center of MY and I was instructed to get the virtual environment moves on the DC to NY. Some time, I would like to just physically move the ESXI hosts via UPS , the other decision that was made was to add new hosts esxi for the DC to NY. We will be upgrading the liaison network between the two sites.

  
  My first thought and maybe a bad one, was to use the converter and try to V2V from one domain controller to another. Now, I wonder if perhaps SRM can do this? I know that is not the purpose of SRM, then perhaps that my hypothesis is far fetched. If MRS can be used, just can it with the host replication? I don't know if the array based replication is an option yet.

  If I'm missing something and there is an easier way, please enlighten me

  Thank you

  -MN

  Actually from vSphere 5.1, replication of vSphere SRM functionality was broken off SRM and is now provided with vSphere (all except Essentials license levels) as a stand-alone feature.  So, Yes, marknashe pouvez use 5.1 replication of vSphere functionality (assuming you are using vSphere 5.1?).   He works under the control of a single virtual circuit and does not need 2 VC (one on each site) as is the case with MRS. What is missing from this approach is automation for the migration process, the migration speed and a test feature (but maybe it's not important in this particular circumstance), however it does not cost anything and is a much better solution than V2V - ing your VMS, because downtime will be considerably reduced (VMs must be down to the final judgment & incremental synchronization).

  Second, the planned migration of SRM workflow is designed to meet for exactly this datacenter migration use case.  Several of my clients have used it for exactly that.   Initially, VMware didn't want RS to make use of, but it turns out that about 1/3 of SRM clients exactly what were doing anyway.  So now, VMware has blessed this particular use case with its own workflow.  In fact, it's exactly as a failover, except priority #1 is the integrity of the data; If there is no problem in the case of virtual machines on the live site or if there are final data synchronization (assuming async) then the workflow paused to allow the issue to be addressed before proceeding.

  Invest in RS is useful if you plan to operate in the future for DR automation... If not then vSphere 5.1 replication might be good enough.

  HTH,

  JD

• Cannot add firewall rules using the REST API vShield App

  Hi all

  I get the following error

  "< errors > < error > < code > 100039 < / code > < description > Unmatched rules found in the configuration." "< / description > < / error > < / errors >.

  When you use the App API vSheild:

  POST https:// /API/2.0/app/firewall/dvportgroup-55/config < vsm-ip >

  Paylod XML:

  <? XML version = "1.0" encoding = "UTF-8" standalone = "yes"? >
  < VshieldAppConfiguration >
  < firewallConfiguration = "dvportgroup-55" the contextId >
  < layer3FirewallRule disabled = "false" priority = "none" id = "1021" >
  < action > allow < / action >
  < connected > false < / connected >
  < source >
  < address >
  < ipAddress > 172.30.68.212 < / ipAddress >
  < / address >
  < > 222 portInfo < / portInfo >
  < / source >
  < destination >
  < address >
  < ipAddress > 172.30.68.166 < / ipAddress >
  < / address >
  < application >
  < > 333 portInfo < / portInfo >
  < Protocol > 6 < / Protocol >
  < / application >
  < / destination >
  < / layer3FirewallRule >
  < / firewallConfiguration >
  < / VshieldAppConfiguration >

  Is anyone has seen this before or any idea why this might be happening?

  In addition, create a wall of fire to provide the variable "id"... How do I know which id to use to create a new firewall rule. I'm using id = "1021" I see one last created after quesrying API... but when you call it through automation, what will the process to define an id invalid?

  Thank you

  xar

  ID must be present, for the new rule Id must be '0' while that for others it should kept as what. The reason for this error which I believe is the same. Replacement of 1021 with 0 should solve this problem. http://blogs.VMware.com/security/2011/11/using-the-VShield-API.html should also be useful to start with vShield firewall App REST API.

  -Kone