Automation of post being weird

Similar Questions

• Repeat tool is being weird!

  I'm quite new to the tool of Repeater and wanted to use in motion graphics, I wanted a small rounded rectangle to have an effect of the explosion. So I create 10 copies with her and in the "transform: Repeater 1' I changed my rotation at 36 degrees, it makes it look like an astriek." I was hoping that what he would do has each fly rectangle in the direction they face (already framed the key the original rectangle). However, they all move in the direction of the original rectangle. Is there anyway to solve this problem and to get the effect of the explosion right?.

  There is nothing weird and the Repeater works exactly as it is supposed to work. You all just not put in enough effort to achieve the desired effect by isolating the transformations. You must simply more groups. You put the rectangle in a group and move from left to right, and then you repeat the whole group by placing it inside another group and applying the Repeater for the cloning of the radial range.

  Mylenium

• Inspiron 11-3147 A09 bios update - slow post

  Has anyone else who noticed after the bios update to your 11-3147 A09 she way takes longer to start? It takes on average 15 seconds to look at the logo Dell before Windows 10 begins to start. I installed an SSD drive once it arrives at the point of the operating system to start it is fast as lightning... just the bios post seems unusually slow. I will try to reinstall the previous bios to confirm. I wonder if anyone has had this happen also. I also have an 11-3148 and there was an update of the bios for it the same day. It has not affected there startup speed at all and in fact seemed to deal with "plugged not supported" she had.

  I use a Samsung Evo 850 256 GB.

  Here is an update of this strange story: yesterday, I started the bios A07. BIOS went all very well, but then can't start windows. It is not my drive. He does it in the bios but not during the post apparently. All start-up parameters and the reader look the same as they were before. Tried a 10 repair facility that has actually worked for me this time (before I only got failures for some reason any). It ends and gives me a file of the application log, as he killed in the process. Mostly just the Apps from Dell that is not a big deal. Rebooted and once more start times are nice and fast as I hoped. And that's not all folks! On top of that, he now sleeps properly instead of stopping just as I was whining in my last post. Weird to say the least. It was my last ditch effort. If it didn't I was going to return the dreaded 8.1. Used all night because I normally and it works perfectly. The only thing I noticed mention, is that the battery does not charge of 100% which is what fixed the update to bios A09. No biggie. It says 99% and I know that it is fully charged. It really makes me wonder how the guys at Dell discover stuff before it was dismissed. Seems that every type of computer that is working for my company is in the same way... a correction of a bug but neglect to check if the patch touched anything else and walk.

• I dropped my computer, now it is weird...

  I recently dropped my laptop (it's a Samsung, not sure what type; it is only a year), and the battery kind of popped out of its holder. :(

  Subsequently:
  -L' computer would start ok, until he got on the desk
  -But then it would freeze at the level of the office, and none of the programs would work
  -Ctrl-alt-del doesn't work.  This error message is there if I tried.
  -Safe mode worked sometimes.  Sometimes he wouldn't, he would be stuck at the black screen (white/letters) and stay there.

  I found myself eventually the running system recovery and that seemed to fix the problem.  The computer worked fine for about 24 hours.  But earlier, he crashed again (for no apparent reason), and now it's back to being weird.

  Safe mode works ok, but the normal mode won't let me run programs.  This is suuuper slow.

  I know it's kind of vague, but I would appreciate REALLY any ideas on what could be the problem.

  See you soon,.
  Grace

  UH... Call Samsung technical support would probably be the best idea. It is possible that, for example, the memory, the modules are loose, HDD or motherboard has been damaged etc. In regards to the memory modules, it is likely that you can remove and insert again by yourself (with AC adapter disconnectd and battery removed from your laptop). At the bottom of your laptop, there should be a latch (attached with a Phillips head screw). This latch hides the memory modules. Whatever it is, the safest way would be to contact Samsung support.

• install CS5 update since no applications CS2 being present on the HARD drive?

  Hi people,

  This is my first post, being achieved here by browsing Adobe web support portal.

  My problem: I have CS5.5 Design Standard upgrade version allowing me to upgrade from CS2 Design Premium. However, as I cannot install CS2 beyond OSX 10.6 and am now using OS x 10.10, so he accepts the serial code but will not setup as CS2 files are not?

  Thanking in advance, stakeholders

  Love, Roger.

  No need to install CS 2 to activate an application CS 5, like the activation server is no longer available for the activation of the CS 2, you need to unlock the CS 5 serial number.

  To do this, you will need to check with Adobe customer service:

  https://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

  You can try the link below:

  [Click the button still need help and select the Chat option]

  Contact the customer service

• on the screen keyboard covers half of the screen

  How can I reduce the size of the keyboard on the screen screen touch 27 "Windows

  How can I reduce the size of the keyboard on the screen screen touch 27 "Windows

  Trade places with this poster?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-TMS/Windows-8-touch-keyboard-gone-small/1e8a1899-3232-4df5-a76c-c8dcfbe98cc6

  BTW if you really use the osk.exe "on the keyboard to screen' you can resize it by dragging its borders.   But I assume you really mean the touchscreen keyboard than the other because poster being too small.   So, maybe you could try the test I was speculating on, making a split screen scenario requiring a tactile keyboard - is usable touch keyboard then?

  FWIW, I would me be great too, even if you use a mouse, to have a greater landing for each key area.

  Also, are you talking about seeing this in an office scenario or in a full screen of the modern UI (MUF) scenario?   When I do this with MUF IE on my widescreen monitor keyboard seeks only stupid, I see the split screen, which is of course useless especially for one user of mouse is, but others seem reasonable.   Having a width TIP may seem a little extreme too I guess, but you could just write in it anywhere where you want to write. you don't have to use all of it.

  Hmm...  I can't do a test for office scenario.   Whenever I try the touch keyboard ends on my Tablet instead of on the monitor where is the startup screen.   Weird.   I had to change my IE window exit full screen mode just to get on the charm of settings on this monitor (having forgotten temporarily Win - I ).

  HTH

  Robert Aldwinckle
  ---

• HP envy 15-u110dx 360 x: portable fix confusion

  OK, so my laptop ( https://www.dropbox.com/s/v2a47w6qkeboo8b/Screenshot_2016-03-12-10-32-16.jpg?dl=0 ) < screenshot at all, it's the technical details, the only thing different is I win10... couple days ago what I now pin pointed is the fan started making a noise light ruttering occasionally. I opened it to the top has blown the whole intestine clean there is no debris or dust here all I have not seen everything loose or dirty, I'm not familiar with the inner aspect of the laptops but.

  (1) the fan looked like plastic when it is low, as this iconic white brand see you when you bend a plastic on the underside of the fan his watch still smooth but it is not not black like the rest of the fan on the end of its edges along its blades.

  (2) the support of the laptop inside seemed to heat was that I can't travel far from what I think, it's the motherboard (the giant green circuit chip?) leaving as a tarnished heat over the laptop, support inside.

  (3) it seems to be a kind of copper finisher on some parts of the Interior support but don't look like to see as if it seemed it was made of the spray paint for air and finally.

  (4) the coil in copper? that leads to and fan, and this seems tarnished a bit like someone took a knife for her I rubbed my hand on it to feel and he literally felt like any other copper tubes I hit.

  So with all that said there no drops in the way that the laptop works it slow or whatever it is and today it started to hum as game controller your comments I turned off the laptop and it's stuck in front of a window air conditioner that it was as if he needed and I was also afraid like a baby in the Woods lol. Please help I don't want my laptop to become the trash and I am at a loss of info on parts and others I do not want to pay a fortune on a guy who will probably just replace the fan and send me home. Im a cookie smart if I get some solid answers and guidance, I am sure that I could do everything which is necessary on my own it please and thank you. DANG also I got it for about 9 months and I only started on this game recently.

  but more often then I should I always forgot to turn off the pc before I SLEEP. Sorry for the long post and weird and other spacing that I wanted to cover all the details and I didn't post half a thought by accident.

  do not know if I closed this thread or not but otherwise... quick update all my necessary fan was a good cleaning and oiling sounds new and turns completely great

• SR2180NX adding memory and a video card, how?

  I finally decided to do a upgrade to my PC but I pushed my brain batty, trying to figure out how I would add memory and if I should update my video card now cause my Sims 2 game, instead of smooth running, it runs a little rough and frame by frame. Very annoying. I also want the Sims 3 to be able to run on my computer, I hope I can get it all done before they release.
  I have windows vista Home premium, and I have a PC I did not do anything for her, so it's a bit as if it was from the factory around a few programs of vanilla.
  
  * Manufacturer * Compaq Presario
  * Product * RK548AA-ABA SR2180NX
  Total number of logical CPUS * 2
  Total physical memory * 1.00 GB
  Total number of optical drives * 1
  Total number of disks hard * 1
  Total number of video cards * 1

  * Memory *.
  ------------------------------------------------------------------------------
  * System memory * total physical memory * 1.00 GB
  * Free physical memory * 443,21 MB
  Total virtual memory * 2.00 GB
  * Free up virtual memory * 1.94 GB
  * Page file space * 2.24 GB
  
  * 512 MB DDR2 - SDRAM (PC2-4200 / PC2-4300 / 533 MHz) * memory size * 512,00 MB
  * Type of memory * DDR2 SDRAM (PC2-4200 / PC2-4300 / 533 MHz)
  * Manufacturer of memory * Hyundai Electronics
  * Date of manufacture memory * week 39, year 2006
  * Revision memory code * 4141
  
  * 512 MB DDR2 - SDRAM (PC2-4200 / PC2-4300 / 533 MHz) * memory size * 512,00 MB
  * Type of memory * DDR2 SDRAM (PC2-4200 / PC2-4300 / 533 MHz)
  * Manufacturer of memory * Hyundai Electronics
  * Date of manufacture memory * week 39, year 2006
  * Revision memory code * 4141
  
  * Video card *.
  ------------------------------------------------------------------------------
  * Intel (R) 82945G Express Chipset Family * manufacturer * Intel Corporation
  * Video card chip Type * Intel (R) 82945G Express Chipset Family
  * Video card memory * 256,00 MB
  * Video card BIOS * Intel video BIOS
  *Driver*c:\windows\system32\drivers\igdkmd32.sys
  * Version * 7.14.10.1461, 25/03/2008
  ------------------------------------------------------------------------------
  and it's the plug to run the Sims 3
  ------------------------------------------------------------------------------
  THE SIMS 3 MINIMUM REQUIRED HARDWARE CONFIGURATION
  
  FOR WINDOWS VISTA
  * Windows Vista (Service Pack 1)
  * 2.4 GHz P4 or equivalent
  * 1.5 GB OF RAM
  * At least 6.5 GB of disk space hard at least 1 GB additional space happy Custom
  * 128 MB video card with support for Pixel Shader 2.0
  
  For computers using built-in graphics chipsets, the game requires at least:
  * Intel Integrated Chipset, GMA X 3000 or more.
  * 2.6 GHz Pentium D CPU, or 1.8 GHz Core 2 Duo or equivalent
  * 0.5 GB additional RAM
  
  SUPPORTED VIDEO CARDS
  NVIDIA GeForce series
  FX 5900, FX 5950
  6200, 6500, 6600, 6800,
  7200, 7300, 7600, 7800, 7900, 7950
  8400, 8500, 8600, 8800
  9600, 9800, GTX 260, GTX 280
  
  Series ATI Radeon™
  9500, 9600, 9800
  X 300, X 600, X 700, X 800, X 850
  X 1300, X 1600, X 1800, X 1900, X 1950
  2400, 2600, 2900
  3450, 3650, 3850, 3870,
  4850, 4870
  
  Intel® Extreme Graphics
  GMA X 3 x 00 series
  Laptop versions of these chipsets may work, but can run relatively slower. Autonomous cards installed in vanilla (not PCIe or PCIx or AGP) PCI slots, such as some GeForce FX variants, will perform badly. Intel chipsets integrated starring parts underclockes would not run properly.
  
  Chipsets integrated such as the ATI Xpress and the NVIDIA TurboCache variants will have low settings selected, but should operate satisfactorily.
  
  Please note that attempting to play the game using video hardware that is not listed above may result in reduced performance, graphical issues or make the game work do not at all.
  The NVIDIA GeForce FX series is unsupported under Vista.
  
  and he also said when I watched the news of the memory of the BIOS screen:
  
  Installed memory 1024 MB/PC2-4200
  Bank 1 512 MB/DDR2 SDRAM memory
  Memory Bank 2 not installed
  Memory bench 3 512 MB/DDR2 SDRAM
  Memory bench 4 not installed

  I know that I have to add memory and a video card, or even a power supply according to the video card, I get. Memory seems simple and easy to do, but the power SUPPLY and the video card, makes me a little nervous, any suggestions on what I should get and instructions on how to proceed will be greatly appreciated Thx! I apologize for this post being so long.

  Message edited by CareBear31 on 02/05/2009 13:02

  Adding instructions are here. When you buy new memory be sure and go to the website of the manufacturer of the memory. Use only brands so that they ensure th your product compatibility. Use the memory Configurator tools on the website of the manufacturer of the memory. Here are a few major brands for you: Kingston, Crucial, Corsair:

  Change the power supply: This video on youtube is pretty decent for generic power supply switching.

  Thislinkhas information on opening the cover and remove the cover.

  When you select a video card do not get cards great physically (i.e. ATI HD 4870 / 4850) because they are double wide and does not have limited space. Fantastic cards but are not for the pre-built PC.

  Any ATX PSU fits your case. 450 watts or therabouts enough for almost any addition of hardware on your pc. Do yourself a favor and stick the best brands such as Corsair, OCZ and others. Generic brands are not worth the problems they can bring even if they are cheaper.

• Foglight for virtualization 7.0 Standard Edition Compatiibility problems with vSphere 5.5

  Hello

  I couldn't understand how just after to the Foglight for virtualization forum, so I apologize for this post being in the wrong place.

  I have the Foglight 7.0 Standard edition and I'm unable to see virtual machines on the hosts of a new vCenter Instance I added to Foglight.

  I have enough licenses and the hosts appear in the inventory, but if you hover over one of the new hosts attribute 'State' reads "Not responding" and appear any of the virtual machines in the cluster.

  Any ideas as to what could go wrong or what I would have been able to hurt?

  Thanks in advance.

  -Richie

  Hello Richie,

  Sorry for the late reply to this post.  It was the first time I saw it.

  The problem you describe would require a deeper look.  If you haven't done so already, please open an SR, and we can help you with this problem.

  Thank you

  Bill

• Windows mail and e-mail recived incorrect account.

  I have several different 'accounts' within windows mail and each with a different e-mail address for use by the members of the family separated.
  Everything works fine because they have been implemented, but now an account has not reciving e-mail & mail addressed to another account is displayed with respect to another person (despite the Envoy to... address by post being correct)

  This is starting to drive me crazy because no one knows what email is for whom, without them open & read the Envoy at the address on the mail.

  t-4-t, no rules set up & tried to scan e-mail out, no joy.   As I said that everything has worked well since the implementation (over 12 months), but 2 days ago, this problem started without warning.

  Did you reboot after you turn off the option to e-mail analysis?

  Opportunity:
  The account that stopped from receiving and sending could have been damaged. Delete this account, recreate the account.
  See if that helps. Note: you do not want messages from accounts and other backup before deleting the account.

  If still no go, I can only suggest you install Windows Live Mail which is supposed to replace Windows Mail anyway.
  Link to Windows Mail:
  http://download.live.com/wlmail

  t-4-2

• HOW CAN USER ACCOUNTS - I GET THE CONTROL TOTAL OF THE RIGHTS OF THE ADMINISTRATOR

  My son gave me a new laptop & was the only thing he had done about it. I have to fill his user a/c (I don't know if he had as long as administrator or standard use, i. t is an Assus running Windows 7 Home premium 64-bit. The 1st thing I did was to fill my a/c user and put myself as administrator and then I deleted my a/c son, I deleted then security trend micro came with the laptop and loaded AVG (as I had on my old laptop running xp), I loaded then firefox to allow me to get WOT (Web of trust web) & then I deleted firefox as I didn't want her as my web browser Then I downloaded the drivers from HP for me to load my printer which I did via cable & it worked, then I tried to load the software of the printer & at the end of the installation, a box came in saying that this software cannot be installed using the command "run as" & to log on as a user with administrator privileges (which I've already connected as) I then tried to install a program of work that she did, but when I tried to access it told me who requested access to the registry is not allowed. After all this, I really wanted to I stayed with XP, I started to search microsoft answers forum & got a lot about UAC & I saw a response messages recommending an ITknowledge24 download what is UAC controller tool v1.0, I downloaded it & the icon that he was put in my taskbar , but this has now disappeared, I'm not a beginner on computers but I'm a geek, there seems to be a lot of people with the same or the same things I feel, I just want to know how I can get a complete control of the administrator rights on my computer to allow me to do what I want I could do on my XP , by the way I'm never any infections or malware on my computer laptop previos. CAN someone HELP Please, THANKS (sorry for this post being so long, but if I put in what I did now, it might save some time later).

  I had the same question and posted in this forum 4/17 in order to check the answer here.  Can't say it will solve all of your multiple problems, but you should get full administrator rights.

  Re-start while pressing F8 repeatedly.  Select "Safe Mode with command prompt.  At the prompt, type net 'user administrator /access:yes' and press ENTER.  He should then confirm the success.

  Restart and you should now see administrator as well as your own journal on.

  Note: there is a space between the administrator and the slash.

  WARNING: In Win 7 access to some folders and permissions files is limited for security reasons.  Normally, you should not access this and please be careful when using it.

• Manager proxy ADB BlackBerry stopped working

  Hello

  I worked on an Android app for the months that I was developing on my classic BlackBerry. It was working fine. I could even debug via WiFi through the Proxy of BlackBerry ADB Manager. However, after the update my Android SDK Manager and a bunch of Android stuff here today, my device will not be displayed in the adb devices list more (not in IntelliJ and not on the command line). My camera is in development mode and has a debugging deployed token.

  The tool always seems to run IntelliJ, and it connects properly as it did before. Is there a specific version of Android SDK Build-tools I should use? I guess I'll try and remove the new packages until I'm back to the old, but I do not know if this is the problem.

  This is what my coach of Android SDK looks like:

  

  Perhaps any other developer can help me by downloading the latest version of the Android SDK and see if it works (to check that it is not my machine being weird).

  Well, I fixed by uninstalling my Android SDK and by installing a former of this site:

  http://www.Appcelerator.com/blog/2014/10/updating-to-Android-platform-tools-version-21/

  

  I will continue to use it until the BlackBerry Update Proxy ADB Manager works with the version of the Android SDK Platform-tools v23.1

• SG200 to VLAN SG300

  Hi all

  I have a client with of several SG300 for VLAN1 for data and voice VLAN10. PCs are piggy is interrupting the phones and showing in the fine SG300:

  

  A Department has recently employed more people, so we have a SG200 switch to connect the computers and phones. I don't seem to be able to get all the connectivity between the new switch and the SG300 it should connect. I have installation VLAN1 and 10 according to the images below:

  

  

  (Most likely) I'm missing something obvious here?

  Thanks in advance.

  If all ports are 1u, 10 t between the two switches, there is a different problem.

  I guess it's possible that the new switch SX200 can act only wobbly. Pass you any firmware prior to installation?

  I probably load the latest software and the switch to make sure it isn't being weird with you.

  -Tom
  Please mark replied messages useful

• How to get a USB 2.0 wireless adapter to work on Win7 Ultimate 64-bit?

  Details:

  ASUS P8Z77 - V motherboard w/Intel Core i7 3.5 Ghz 3770 K LK
  16 GB OF RAM
  HWUN4 USB 2.0 wireless adapter b/g/n w/Realtek chipset Hawking RTL8192CU
  Windows 7 Ultimate 64-bit fully updated to include SP1
  It is the second USB card who refuses to work on this platform, the first being something Rosewill which also uses a Realtek chip.
  I checked that the drivers for my MB are up-to-date, verified that I have later Hawking, tried drivers directly from Realtek drivers for the chip and assured that I installed the latest Intel MEI driver package for my motherboard. I went on the USB settings in the BIOS, but I'm not exactly fluent in what the options really are or do. I went through all of this also try to get the Rosewill unit to work several months past, as well, but without success with a device. It is postulated that the Hawking unit is actually Edimax, although I can't find any similar product on the site in order to try the drivers for. I also completely turned off my firewall ZoneAlarm and Avast! antivirus during installation and configuration, for the same results each time. The results does not same are achieved regardless of USB 2.0 ports 10 or if I connect to the adapter for.
  With this Hawking and the previous Rosewill adapter, drivers seem to installs successfully, such properties as displayed in the Device Manager say "this device is working properly", but they do not find a wireless signal. Simply says Windows Network Diagnostics adapter is "problems" and suggests that drivers can be a problem and always indicates that the latest drivers are already installed every time I have send the update to the latest drivers on my hard drive.
  I can come to only three possible conclusions:

  (1) Windows 7 Ultimate 64 - bit is unable to use USB 2.0 wireless network cards.

  (2) Windows 7 Ultimate 64 - bit is unable to use USB adapters based on the Realtek chips.

  (3) my motherboard lacks the correct BIOS settings to fully activate USB wireless.
  I have several other USB 2.0 devices that all work fine on this platform, including cameras, USB keys, external drive docks, mice, keyboards, phones, and others. I googled the days and found nothing to convince me the problem with my motherboard, I can't find anything specific on Win7x64 being a problem with this. Comments on NewEgg and other sites indicate people successfully use wireless adapters USB with Win7x64 and even on the same motherboard, I use, so I have to assume that I have either overlooked something or not yet found appropriate hardware and/or software settings.
  With this post being half-rant and half-cry for help, I will respectfully ask for suggestions on how to solve this maddening problem.

  «I don't mention it in my first post, certainly, but these devices have very certainly works wonders on a laptop with Win7x64 and a desktop computer with WinXPx32 installed.»

  So your previous conclusions are wrong, because they contradict what you are saying now.

  I can come to only three possible conclusions:
  (1) Windows 7 Ultimate 64 - bit is unable to use USB 2.0 wireless network cards.
  (2) Windows 7 Ultimate 64 - bit is unable to use USB adapters based on the Realtek chips.
  (3) my motherboard lacks the correct BIOS settings to fully activate USB wireless.
   
  I wanted to know if the adapter STILL works, not its past history. I have a D-Link WDA 2320 worked in another PC perhaps a year previously, but now it shows in the configuration, and that's as much as I can get with it. A few years ago I had a computer that did not like any wireless device, either PCI or USB and finished by hard wiring it which was very annoying.
   
  OK, back to your...
   
  Go to Device Manager and uninstall the device.
  Then set Device Manager to show hidden devices.
  Remove any instances where the adapter has tried to implement on a USB port
  Remove all instances of the downloaded driver files.
  Restart the computer. There should be nothing about it that the adapter can use more
   
  Then download a SINGLE instance of the pilots approved here. http://hawkingtech.com/products/hawking_products/Hi-gain_wireless_networking/HWUN4.html
   
  According to the manual, you must run the file from the driver before connecting the device to the computer...
  Connect the device and then run the driver file. Restarting after the installation of the drivers and when the computer is back running, connect the device...
   
  If you no longer have the manual or quick setup guide, get from here...
  http://hawkingtech.com/products/hawking_products/Hi-gain_wireless_networking/HWUN4.html
   
   
   

• Alerts contact blackBerry Smartphones has mind of its own?

  After I upgraded to 4.7.1.57 SEM or 2 ago, I noticed that at random times (I think that most, if not all time my phone is unsheathed) someone will call and he is not the ringtone I put to all calls, itll being weird, finally looked in profile / contact alerts and there were so many entries it completed the page! I did not an ANY of them there... I deleted the latest days and last two days two calls had the weird ring and it auto added to the alert contact list!  What is happening with this?

  I don't want or need to diff to diff rings helps people...

  

  all the 9630's have this disorder, it is a gitch software and Rim is aware of this and working on a fix.