AutoPlay questions with a USB non-volume device which is regarded as a com port virtual using a chipset LPC2468 IAR.

Similar Questions

• USB to serial port, Com port to use.

  I have Windows 7 64 bit Ultimate, evga 58 MB Intel i7 950 3.06 GHz, 6 GB ram, many locations for usb. I have a weather station "Oregon Scientific WMR968, I plugged my XP PC via a"usb to serial"cable, it worked well, giving me a com port to use for the software, but it does not work with Windows 7. It installs an input usb device, under the label HID, but not a COM port I have tried many drivers, but she finished in the same way, "peripheral usb entry" NOT a COM port I have tried to install .inf and who does not work either. I tried to update driver, and then point to the .inf and still no good. How to do this job, please. ?
  Frustrated,
  Robert

  Hi Androman,

  First of all I suggest you to check if the Oregon Scientific WMR968 is compatible with windows 7 or not.

  Check out the link given below to the windows Compatibility Center 7.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  If it is not compatible with Windows 7, then install the drivers in XP sp2 compatibility mode and also to contact the manufacturer for drivers that are updated that are compatible with windows 7.

  Select the option for windows XP sp2 and install the drivers.

  For more information, visit the link given below:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Pair several devices on the same COM Port that use the stack for windows by toshiba bluetooth?

  I have several instances of the same device...

  I wish that they all use the same COM Port when connecting to my Toughbook.
  The application that will receive data from these devices will only monitor a single COM Port assigned to.

  I have only one active connection both for couples... That's why Ifeel, this should be possible.

  Any help would be greatly appreciated

  Thank you

  Hello

  Please contact the Microsoft Community Forums. I understand you want to pair multiple devices on the same COM Port using Bluetooth.

  Unfortunately, it is impossible to pair multiple devices on the same COM Port using Bluetooth as it is by design.

  With the help of Windows-related issues feel free to post on the Forums of community of Microsoft, we will be happy to help you.

  Thank you.

• How can I get the drivers for xp usb / get the device can run faster in the listed ports

  POP UP WITH SAYING HIS DEVICE CAN RUN FASTER IN THE PORTS LISTED, I HAVE THE WIRELESS CARD WIRELESS, MOUSE AND SPRINT U600, CONNECTED TO THE LAPTOP, THE PROBLEM JUST STARTED

  See the discussion of the difference between USB 1.1 and USB 2.0 and why this error message http://ask-leo.com/what_does_the_usb_device_can_perform_faster_mean.html
  If you have an old computer, you do not all USB 2.0 ports or some of your USB ports may be 1.1 e.a. 2.0

  Open the Device Manager (start > run > devmgmt.msc > OK) and expand the "Controllers of Bus USB" section by clicking on the + sign to the left.

  Are there warning icons? If so, provide details

  It will probably take several entries for "PCI to USB Host Controller" or similar terms.  Please report if one (or several) of these entries are for a "PCI to USB Enhanced Host Controller.  If none of the USB controllers is "strengthened", you do not have USB 2.0

• Non-existent devices USB not recognized

  We get the message that USB device not recognized on several machines (Dell Optiplex 980) with XP and the same type of machines with Windows 7. The only USB devices that are attached to the machine are the keyboard and the mouse and the two are identified by the system and are working properly. Mention all the answers that I can find for similar questions about errors for non-existent devices. Can anyone help? Thank you

  No card reader. I submitted this to Dell as the system is a Dell Optiplex 980 and they said that the problem may be with the motherboard that needs to be reset. I tried to unplug the PC from the wall, but that has not solved the problem. They sent a technician with a new motherboard. That did not help. When downloading all the drivers I could find, I noticed that the monitor was turning and all by itself. Also noticed that we had a USB2 cable connection of the monitor to the computer to activate the USB port that is built into the monitor. When I pulled the usb2 to the monitor cable, the error has disappeared and when I plugged it in the returned error. I have this will report to Dell, but in the short term, the problem is resolved.

• USB Mass Storage Device gives me the Code 10 error. This device cannot start

  I have an external hard drive, Iomega Prestige 1 TB and one of the people at the school he fell from the top of the computer tower that resembled a fall of 30 cm, after it still worked, but then a few minutes later there not later he was still able to connect but it kept asking me to format it , so I wanted to try and find a way to get my data without formatting it. A day later I plugged the external hard drive, it started to beep for 5 min then it connected to the computer but unfortunately didn't show up in my computer, but he did it in the printer and peripheral. I checked my device manager and it showed a yellow explanation mark with the USB mass storage device. I went to properties and it says: "this device cannot start. (Code 10) "How can I solve this problem?

  Hi AntonioDavism,

  You can check if the following is useful.

  Method 1: Run the hardware and devices Troubleshooter and check if that helps.

  Method 2: Follow the steps in the below article mentioned and look for the question.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

• Read the serial number of the device in LabView COM port

  Hello

  Is it possible to read a device COM port number in LabView? I would like to make an initialization of the program following the right port COM of a device, for example a USB temperature reading device, and set the COM port as the correct port at the start of the main program of LabView. I want to do that, because a USB device gets usually different dedication of COM port on different computers. Our application runs on 80 different computers. A program like that would be very nice.

  Can someone help me?

  Paal

  Another thought. It also has a place where certain standards can save you a lot of time.

  You have 3 dongles by machine. When setting up a computer are these three dongles * always * assigned to, for example, com 3, com 4 and com 5.

  Similarly, always check that instrument 1 is always on com 3, tool 2 is always on com 4 and 3 device is always on com 5.

  This convention will also simplify debugging...

  Mike...

• Question - the upgrade with 3 USB card and esata

  I have an early 2008 Mac Pro Quad core 2.67 going to have maxed out RAM soon and are planning to get a couple of 2 TB seagates Macgurus. I'm a little embarrassed by my lack of knowledge, but I'll put my questions over there anyway. Last year, I bought a 120 GB ssd card Accelsior PCIe mercury OWC - not being aware of the s and outs of things, but I knew it wasn't a port multiplier with two external esata ports. so my question is this: since I have to live with this card can I connect the esata ports to discs in separate outdoor pens and then through disk utility make a raid 0 set, and what size of disc must be effective for the cost the least?  I intend to get a USB 3.0 also so that I can use this speed also.  My other plans must be a drive of fusion with the ssd 120 on the map of Accelsior with a disk of 1td existing in my drive for the system Bay and replace all small readers of seagate more big HARD drive and I'm wondering if the 2 TB is the largest capacity I can use internally. I am on a very limited budget so that's the reason why I'm thinking hdd and if there is someone with advice on a card USB 3 I would appreciate your comments - in fact, I would be happy to comment on everything I mentioned, I'm a little out of the loop on the evolution in recent years. It is possible to configure a raid with two disks of two PPI crd esata ports would there be an advantage with drives of 2 TB or 1 TB disks would work as well for raid 0. Do I intend to put in storage for Time Machine with the USB 3 map, and what size disc would be appropriate for Time Machine? I'm not lazy and waiting for someone to find out - I did weeks of research to get to this point and I just need a little advice. I'm just going through what I know and what I can afford, but maybe I'm missing another solution to try to get a little more speed and back up storage for my photoshop files.

  I do only cc2015 Photoshop, Lightroom and On1software version 10.1 using OS X El Capitan and a cg 276 Eizo monitors more a second older Eizo. My usb ports 2 are all used and I rarely use a firewire port. Thanks in advance to all those who have advice. This is the first time that I have not posted anything on this forum

  Time machine is a USB 2 connection. No real reason for a USB 3 connection.

  There is no RAID in disk utility in El Capitan. Apple dropped the disc utility in El Capitan. However, you can still the Terminal commands to configure RAID.

  https://www.reddit.com/r/OSX/comments/3d7aw2/does_el_capitan_disk_utility_suppor t_raid.

  You should be able to create a set with eSata RAID

  Here is a map of the BSE 3 compatible with El Capitan.

  http://www.sonnettech.com/product/allegrousb3pcie4port.html

  USB 3.0 Mac Pro 2008 El Capitan

  Make sure that the card said it works with El Capitan. Some cards USB 3 is no longer with El Capitan as the CalDiget of first generation card.

  Internally the Mac can also use large HD depending on availability. However, there is a bug that first appeared in 10.8.4 and has not yet been set. To format a plu 2.2 to internal HD:

  -Use a disk utility of all Mac OS X older, including the 10.6 DVD (if your Mac can boot from it) or any of the installation DVD player or boost saved work.

  -Another solution is to move this drive in an external case and delete it there (assuming your case is modern enough to deal with readers more than 2.2 to.

  In addition,

  To sled mounting internal:

  The penetration of the screw depth for 'down-screw mount adjacent to the platters' on some readers from over 3 TB have been shortened. This may mean that the live sled down until they adjust and begin to compress the washers on the sled. If this is the case, your drive will not rest flat on the sled and do not breed with the connector backplane without additional adjustment.

• Installation question on Satellite M30 PSM30E USB mass storage device

  Hi people,

  I get an error message when I try to install new hardware on my laptop. Windows XP is trying to find the drivers and then comes up with the following error after a few minutes. The software starts to install but then comes with the following text:

  "There was a problem installing this device:"

  USB mass storage device
  An error occurred during the installation of the device
  These data are incorrect

  What happened with a USB card reader and my mobile. Once I have the error box I get a message saying that the device will not work properly?

  Anyone has any ideas at all?

  See you soon

  Hello

  What series of notebook or laptop model do you have?
  Could you please put the whole number? It would be very useful for further study.

  All the installation driver Toshiba must be made in the right order.
  In most cases, you would find a txt file of installation instruction on the Toshiba driver page.
  You must follow these instructions to ensure that all drivers would be executed correctly.

  Concerning

• Disable AutoPlay of CD and USB with XP Pro

  It is possible to:

  Disable AutoPlay of CD and USB with XP Pro

  How is it made?

  Greetings from Jørn Rudolph to the Denmark

  It is possible to:

  Disable AutoPlay of CD and USB with XP Pro

  How is it made?

  Greetings from Jørn Rudolph to the Denmark

  Sorry about the quote lol

  but here ya go

  • Click Start
  • Click on run
  • Enter GPEDIT. MSC
    The mmc group policy will appear. On the left panel:
  • Double-click Computer Configuration to open the submenu
  • Double-click Administrative Templates to open the submenu
  • Double-click system to open the submenu
  • Double-click autoplay Turn off option that will be near the bottom of the list in the right panel.

  The default value is not configured. Set it to "Enabled".

  The credit goes to www.windowsnetworking.com
  hope I helped :)

• Windows XP SP3 USB errors / unknown devices with Plug and Play

  I have problems with USB flash drives and other plug-and-play devices detected by windows. After taking all possible measures to correct this problem (e.g. windows update, chip / update of the bios, update driver, driver and media ultilites reinstall, uninstall and allow windows update after restarting, removal of hidden devices and even remote tech support from Dell) whenever I connect a flash drive or use all plug-and-play devices it is detected as an unknown device and I can not put updated pilot any port I use. Hardware problems were excluded dute to recognition of the device and USB keyboard and USB mouse are functioning properly. Also these same plug-and-play devices worked well on other items of work. After Googling my eyeballs, I gave up and need help please. The only thing I can do now is to reinstall the operating system that really, really, I don't want to do.

  UPDATE *.

  Dell has replaced the motherboard and the problem was solved. Thanks to all here who offered advice and patience.

• Sansa Clip + Question of burden (with mini USB cell phone charger)

  I have a few questions about the issue of workload:

  • is it acceptable to fresh clip + use the charger of mobile phone with mini USB socket (5v ~ 700mA), as I know, USB 2.0 specification is 5v ~ 500mA?
  • Sansa is equipped with a circuit to handle the charging process, for example the the blackout when the battery is fully charged?
  • After that several hours connected to the computer, the turn display self... is this normal? (so I have to press a button to see the screen saver and check the State of charge)

  Thanks for the answer of my question... hehhe

  You can use any charger, but be sure that it is 5V and not higher than (above will FRY your Clip).  Around 350 my and especially (even if some 500 my and above is best) is very well - the Clip will use the amperage he needs.

  Yep, you can disable the data pins and everything should be ok.  Just be sure you know what you're doing on the pins.  Many people say to be able to arrive at the same end simply by inserting the USB cable into the computer, not completely or by covering the data pins.  In addition, you can buy USB charge cables only - I have a couple of people.

  Note that when you connect to your computer, you can still read the Clip files, via the computer itself (not the music) and media playing software that is pointed and play the songs on the Clip.

• There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.

  There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.
  I tried to connect my xbox to my computer to xbox live via the 3g router, but I was unable to. According to me, there is something wrong with the network card, since neither the wifi (wlan?) nor the lan connection seem to work.
  I harnessed connected my iPod, Xbox 360 and Nintendo DS for her, but not my computer. Please help me, what wrong with my computer?

  original title: problem with the map?

  Hi GustavTak,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?

  Try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

• Group residential market, having problems with non-windows devices

  I have Windows7 Ultimate on my desktop PC.

  I'm Tournai on homegroup and join my laptop running Windows 7 Pro.

  I have a printer wireless on my home network, but also a Synology NAS of DS213air for backups.

  My laptop has no problem after turning on homegroup.  I was able to continue to send print jobs to the printer network and is still connect to the NAS.

  However, on the desktop, print jobs sent to the printer network has failed.  I removed the printer from my devices and tried the card again.  Windows cannot find the network printer by itself, however, I was able to map the printer again in hand - type the IP address directly.

  The connection mapped to my NAS in Windows Explorer became too broken.

  If I open the DOS command screen and try to ping the NAS server with its network name, I get host not found.  If I ping by its IP address, I get the answer.

  I deleted the mapped drive broken to the NAS in Solution Explorer and was able to re - the map again to hardcode NAS IP address.

  However, my backup software is losing its connection to SIN at random times, sometimes 3 hours after the start of a backup, other time 12 hours after the start of the backup and transfer 700 + GB to the NAS.  For the past 3 weeks, no backups not completed.

  I failed to identify the reason that Win7 Ultimate has ceased to recognize the names of my two non-Windows devices network after you have created the homegroup.

  Any help much appreciated.

  I found the problem, thanks to your clues in ipconfig/all.

  I thought only I had a direct link between the office and my combo modem/router/AP to access.

  I forgot a month before, I took the dust of an old router to share the LAN to my desktop PC, so I might have extra wired LAN for a separate docking station.

  I have not reconfigure this 2nd router to act as a switch... that is why the office became a different prefix than intellectual property.  I disabled DHCP on it and moved the cable from the WAN port to one of the LAN ports.

  Networking is as it was before.

• I have my iphone connected to my computer with a USB cable, but the device does not appear in my computer folder

  I am trying to transfer photos from my iphone 4S on my laptop, and to do that I need my iphone appears on my computer under Devices folder. even if I connected it to my laptop with a USB cord it still does not appear under removable devices under my computer folder

  It's my understanding that Apple does not allow this.  I can be updated on that.