Windows XP SP3 USB errors / unknown devices with Plug and Play

Similar Questions

• Confused and IVI compared with plug-and-play instrument drivers

  I'm just going up to LabVIEW and see that when I go to download instrument drivers, there are several lists.  One is a Plug-and-Play and the other is typically IVI.  What is the difference?  So far, I've been through the course of the lesson no. 1 and lesson #2 Basic Developer, but we have not touched on the use of the downloaded drivers.

  IVI: Interchangeable Virtual Instrument. With the help of this software layer allows the developer to work with an independent 'generic instrument' of the manufacturer (e.g. Agilent DMM VX OR DMM).

  Plug 'n' Play driver: the driver for the same instance of an instrument, necessary for the operating system to identify and drive the instrument. The driver is device-specific.

  hope this helps,

  Norbert

• OVFTool error: unknown device: "scsi-passthru.

  I'm trying to use vmware v. 2.1 ovftool to convert a vmx (made by WS8 for Linux) to the vcf format.

  I get this error:

  ===

  Source VMX opening: Windows 7 x64.vmx
  Error:
  -Unknown device: "scsi-passthru.
  Completed with errors

  ===

  Can someone advise me? Thank you.

  What is the reason to use the ovf tool in such a special case?

  Remove the scsi passthrough device - it is foolish to try to include

• The devices plug-and-play USB do not install on XP pro sp3 that new hardware wizard cannot find the software.

  Running XP PRO with SP3 and the latest updates as of 12/14/10.

  Both a logitech M570 wireless receiver USB trackball and cause a cooler hub from the usb port 4 master the new wizard material to search for drivers but ultimately are not found.  Neither disks driver with devices or of are available on the Web sites of the companies.

  I also encountered the same problem with a new sandisk sansa mp3 player recently. It was recognized instantly on another computer running Vista.

  However, I have an eternal hardrive of WD and a recognized on my laptop XP Trendnet USB wireless adapter. In my view, that all have two drivers I installed earlier however.

  In the end, I believe not to be able to use the Plug-and-Play devices despite them being listed as compatible with XP.

  I removed the devices, restarted, nothing helps. Unknown poster USB 2.0 Device Manager hub and 2 other unknown devices.  I uninstalled the unknown devices in Device Manager and do it again, but no change.

  Don't know what other information I should include. Any help please, I'm at a loss what to tackle next.

  Hi pennybrown,

  Follow the steps below and check, if it helps:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

  To create a new registry entry that disables the selective suspend of the USB hub driver feature, follow these steps:

  a. Click Start, click Run, type regedit and then click OK.

  b. Locate and then click the following key in the registry: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB

  c. on the Edit menu, point to new, and then click DWORD.

  d. type DisableSelectiveSuspend, and then press ENTER.

  e. in the Edit menu, click on change.

  f. type 1 and then click OK.

  Note: This setting affects all USB host controller drivers in the system.

  If the DisableSelectiveSuspend registry entry value is set to 1, the selective suspend feature is disabled. In addition, allow the computer to enable this device to save power power off the checkbox does not appear under the tab for the USB root hub power management.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unknown device message to an external hard drive USB... supposed to be plug-and-play

  I have a Western Digital external hard drive, 1 TB, I installed a PCI 2.0 card when I couldn't device works.  This has resolved nothing.  When I attach the hard drive, it does appear a message that says that the device is unknown.  I don't know how to fix the problem manually.  I contacted western digital, but be plug-and-play they provide drivers for their products and have referred me to your website.  Please help, its nothing more than an expensive paper weight at this point.

  Hi mgregurich,
   
  I suggest you try the following steps:
   
  Step 1: Find the error code in Device Manager

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, look for the USB device, and then double-click the device name.

  3. under the gaze of general tab for the status of the device for any error code indicated.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
   
  Step 2: Run the fixit provided in the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Step 3:  Unplug the power and USB (universal serial bus), wait for a while and connect the external hard drive to another USB port and check.
  Also, connect the external hard drive on another computer and test if it works fine.

  If the problem persists,

  Step 4: Replace the USB controllers.

  First of all, please disconnect all USB devices and then perform the following steps:

  1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.
   
  Then, restart your computer and windows vista will automatically reinstall all USB controllers.

  If the problem persists, please contact western digital for assistance.
  http://support.wdc.com/

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer
  --------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• MSE uninstalled by an automatic update of Windows XP SP3. Error code 0 x 80070642.

  MSE uninstalled by an automatic update of Windows XP SP3.  Error code 0 x 80070642.
  It will not reinstall.  Tried to restore the operating system to an earlier date.
  Have tried to repair the original operating system with the OS installation CD.
  Spin without MSE and tasked a free anti-virus software in the meantime.

  For problems with Microsoft Security Essentials, you can submit to submit a support case online.

  Note: You may need to remove avast completely before attempting to reinstall MSE.

• Unknown device with location "on system compatible ACPI Microsoft"

  I have an unknown device with location "on system compatible ACPI Microsoft". Under the hardware ID, its value reads "ACPI\INT33A0".

  I have an ASRock H77 Pro4/MVP, a Zotac GeForce GTX 670, an Intel I7 3770, team Vulcan 16 GB (4 x 4 GB) 240-pin DDR3 1600 SDRAM and a SSD MLC of Mushkin Chronos SATA 3. All the these are listed in the devices, with the exception of the memory manager, of course. In addition, all these should have already installed the drivers, but I could be wrong somehow.
  Anyone know what is the device? Where can I get the drivers for it? And what to do?
  Thank you very much!

  Hello

  I hope that my answer is not too late. But I ran into the same problem today. The unknown device is part of the Intel Smart Connect technology. If you do not need just disable it in the BIOS/UEFI Governing Council.

• Windows XP 32 bit ceased to recognize plug and play devices.

  Recently, I had a virus and had to reinstall windows. After installation, I've updated all the drivers and Windows updates. My mouse, keyboard, monitor, and wireless adapter to work correctly. After about 3 weeks, I went to install my printer. I installed the hardware, but it could not connect to the printer. I followed the instructions of the manufacturer again and again but it never connects. His grateful sound because when I turn on the printer or offshore, I hear 'bing', but it doesn't connect. I used the "New hardware found" Wizard with the disc in the drive and it looks right and research, he never does the program on the disk. I tried to use the camera to Windows and the scanner Wizard with no luck.
  After that I gave up, I tried to use my camera, that has worked well until I reinstalled it and it happens "New hardware found" and the "new hardware detected" appears, but it does not recognize the CD, just look and watch for hours. I got fed up and finally bought a "plug and play" card reader SD and the bubble appears in the toolbar "new hardware found", but then the "new hardware found" stands and asks a disc! Its a PLUG and PLAY! There is no disc! The material is on the device! It's not my USB ports because he DOES not see something trendy and I checked Device Manager and he said his work without no problems found, but it does not connect to it. Does anyone have any info on what this might be? ANY help with this is greatly appreciated! Thank you

  Hi pressure,

  Peripheral Plug n Play need driver for the operation.

  PnP means that you do not have to restart the computer to install something.

  I suggest to update the drivers for the chipset of your motherboard and see if a firmware update is available for your BIOS.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with Plug n Play device drivers

  I try to manually install drivers of Plug-and-Play devices for my Aglient 81104 A pulse generator, and I'm having a little difficulty. I found the instructions to know how to manually extract the files, but the instructions say to paste the folder (which contains two files .llb and about 10 files without extensions) to "National Instruments\LabVIEW\instr.lb", but the thing is, I do not have a folder under \LabVIEW\ \instru.llb. All I have is 'MAX' 'NOR-DAQ' and 'shared '. I tried the search function for a folder called instr.lib, but I couldn't find one on the computer. I made a new folder instru.lib and run one of the files .llb, which opened in LabVIEW, manually, but they gave me ten mistakes most read like this

  "-VI should happen to ': \hp81110a\hp81110a.llb\HP81110A Reset.vi' has been charged with"C:\Users\Lab\AppData\Local\Temp\Temp1_hp81110a.zip\hp81110a.llb\HP81110A Reset.vi"

  I tried to manually navigate to the folder \AppData as to move to the folder where they were expected, but I did not see this .vi when I opeend my user \Lab\ folder.

  What happens here?

  Thanks in advance!

  vweltin wrote:

  I try to manually install drivers of Plug-and-Play devices for my Aglient 81104 A pulse generator, and I'm having a little difficulty. I found the instructions to know how to manually extract the files, but the instructions say to paste the folder (which contains two files .llb and about 10 files without extensions) to "National Instruments\LabVIEW\instr.lb", but the thing is, I do not have a folder under \LabVIEW\ \instru.llb. All I have is 'MAX' 'NOR-DAQ' and 'shared '.

  Your operating system is windows, no?

  You search under \Program Files\National Instruments\LabVEW (version)?

  Apparently not that you are looking in the right folder of LabVIEW.  You should see:

  applibs

  self-test

  CCodeGen

  cintools

  Database

  examples

  Help

  InStr.lib

  Internet

  ... and so on...

• Aspire Zs600 Aspire recognizes plug-and-play - plug device in usb and nothing happens.

  Aspire Zs600 Aspire recognizes plug-and-play - plug device in usb and nothing happens. How to solve this problem?

  try to reinstall the Intel chipset drivers:

  http://us.Acer.com/AC/en/us/content/drivers/4531;-; Aspire 20ZS600%

  Select your operating system and download the drivers from the Intel Chipset, and install it, restart, and try again.

  or

  Press the logo windows + x

  Choose Device Manager

  Click controller series universal

  Right-click on the Intel USB controller, and then choose uninstall

  Once done, reboot and wait windows re - install the drivers

• My secondary hard drive (f) disappeared. However when I run windows xp (sp3) in safe mode, it is there and works very well. Help please.

  My secondary hard drive (f) disappeared.  However when I run windows xp (sp3) in safe mode, it is there and works very well. Help please.

  Hello what jay,

  Thank you for your message.  Please, try the following:
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click on "disk management".
  Here you see secondary hard drive?
  If so, you can assign it a drive letter and everything should be good.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• 1 error windows must now restart because the plug-and-play service taken end unexpectedly__error 2 - windows must now restart because the DCOM Server process Launcher service put end unexpectedly__

  1 error windows must now restart because the plug-and-play service terminated unexpectedly
  error 2 - windows must now restart because the DCOM server process Launcher service terminated unexpectedly
  -every half an hour or 45 minutes such error comes and restarting the laptop... How to solve this problem...

  Hi nevil.fidelis,
   
   
  This seems to be a common problem, I recommend you to follow the discussions below and check if it helps.

  You can follow the procedure posted by Bindu RMicrosoft support, Moderator on Sunday, 24 January 2010, at 20:04.
  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/ea20a793-5fe8-4448-9fa2-c3ef45069b87

  For additional help please refer to the following thread also:
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

  You can also check the positions of the TCD in the thread below on
  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/0f1a049c-4852-4321-91d7-dc1255f4d7a4
   
  Consider the response posted by Karena R, Moderator Thursday, December 31, 2009 at 01:28
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microsoft Teredo Tunneling adapter does not work on my Windows 7 and cannot start. The Plug and Play ID for the device is 12.

  Anyone can guide me please by reinstalling my Microsoft Teredo Tunneling adapter for my Windows 7 operating system?  I ran a diagnosis of the system and says it can not start correctly and has a hardware failure. The Plug and Play ID for the device is 12.  I have problems to install it.

  Hello

  Try these solutions:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-do-i-reinstall-Teredo-tunneling-win-7/10ff26a2-fc53-4CDE-AE4C-3cd35f15e2e2

  How do I reinstall Teredo

• Windows 7 printer and HP1120c using gigaware usb, a parallel printer cable is not recognized by plug-and-play

  I can't get my printer recognized by plug-and-play.  I have installed a printer manually, but still can not get to work.  All boards

  Hello Kirk,

  I'm not sure what you mean by "manually installed", but you need a print driver for the printer recognized by Windows. Go to this page to download the driver you need for whatever version of Windows you have: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=14497&locale=en_US&taskId=135&prodSeriesId=25522&prodTypeId=18972&lang=en&cc=us .

  Once you have downloaded the right print driver, I let the computer do the installation.  NOTE: you may need to completely uninstall what you've done "manually" so that the correct driver is working correctly. See the HP Web site for more information (I'd do it, but I do not know what operating system you have and its depth of Bit (32 or 64)).

  Post here if you need further instructions or assistance (be sure to include your OS and Bit depth). Let me know how you fare.

  Kind regards

  BearPup

• Problems with the Realtek and Plug-and-Play driver

  Until recently, I noticed a red circle with an X in it by the sound on the taskbar icon. When I switch on it it says no audio device installed and when I go into the Device Manager there is a yellow triangle on my Realtek High Def Audio Driver. When I click on it I get this error:

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

  The Plug-and-Play driver also seems to give me the same exact error (Code 52) and has the yellow triangle next to him as well.

  Hi Eric,.

  This problem occurred if the driver can be signed or corrupted.

  I suggest you go to the Web to Realtek site, download and install the drivers by selecting the right device.

  Error codes in the Device Manager in Windows
  http://support.Microsoft.com/kb/310123

  I hope this helps. Let us know if you have other problems with Windows in the future.