Sansa Clip + Question of burden (with mini USB cell phone charger)

I have a few questions about the issue of workload:

  • is it acceptable to fresh clip + use the charger of mobile phone with mini USB socket (5v ~ 700mA), as I know, USB 2.0 specification is 5v ~ 500mA?
  • Sansa is equipped with a circuit to handle the charging process, for example the the blackout when the battery is fully charged?
  • After that several hours connected to the computer, the turn display self... is this normal? (so I have to press a button to see the screen saver and check the State of charge)

Thanks for the answer of my question... hehhe

You can use any charger, but be sure that it is 5V and not higher than (above will FRY your Clip).  Around 350 my and especially (even if some 500 my and above is best) is very well - the Clip will use the amperage he needs.

Yep, you can disable the data pins and everything should be ok.  Just be sure you know what you're doing on the pins.  Many people say to be able to arrive at the same end simply by inserting the USB cable into the computer, not completely or by covering the data pins.  In addition, you can buy USB charge cables only - I have a couple of people.

Note that when you connect to your computer, you can still read the Clip files, via the computer itself (not the music) and media playing software that is pointed and play the songs on the Clip.

Tags: SanDisk Sansa

Similar Questions

  • Where can I buy a usb key with thin cable for A500 for cell phone charger?

    Where can I buy a usb key with thin cable for A500 for cell phone charger? Or I can do?  Thanks for any help.

    The A500 uses 12VDC to load. USB use 5VDC. You could do a cable, but it wouldn't work because of differences in voltage. Sorry...

  • Question - the upgrade with 3 USB card and esata

    I have an early 2008 Mac Pro Quad core 2.67 going to have maxed out RAM soon and are planning to get a couple of 2 TB seagates Macgurus. I'm a little embarrassed by my lack of knowledge, but I'll put my questions over there anyway. Last year, I bought a 120 GB ssd card Accelsior PCIe mercury OWC - not being aware of the s and outs of things, but I knew it wasn't a port multiplier with two external esata ports. so my question is this: since I have to live with this card can I connect the esata ports to discs in separate outdoor pens and then through disk utility make a raid 0 set, and what size of disc must be effective for the cost the least?  I intend to get a USB 3.0 also so that I can use this speed also.  My other plans must be a drive of fusion with the ssd 120 on the map of Accelsior with a disk of 1td existing in my drive for the system Bay and replace all small readers of seagate more big HARD drive and I'm wondering if the 2 TB is the largest capacity I can use internally. I am on a very limited budget so that's the reason why I'm thinking hdd and if there is someone with advice on a card USB 3 I would appreciate your comments - in fact, I would be happy to comment on everything I mentioned, I'm a little out of the loop on the evolution in recent years. It is possible to configure a raid with two disks of two PPI crd esata ports would there be an advantage with drives of 2 TB or 1 TB disks would work as well for raid 0. Do I intend to put in storage for Time Machine with the USB 3 map, and what size disc would be appropriate for Time Machine? I'm not lazy and waiting for someone to find out - I did weeks of research to get to this point and I just need a little advice. I'm just going through what I know and what I can afford, but maybe I'm missing another solution to try to get a little more speed and back up storage for my photoshop files.

    I do only cc2015 Photoshop, Lightroom and On1software version 10.1 using OS X El Capitan and a cg 276 Eizo monitors more a second older Eizo. My usb ports 2 are all used and I rarely use a firewire port. Thanks in advance to all those who have advice. This is the first time that I have not posted anything on this forum

    Time machine is a USB 2 connection. No real reason for a USB 3 connection.

    There is no RAID in disk utility in El Capitan. Apple dropped the disc utility in El Capitan. However, you can still the Terminal commands to configure RAID.

    https://www.reddit.com/r/OSX/comments/3d7aw2/does_el_capitan_disk_utility_suppor t_raid.

    You should be able to create a set with eSata RAID

    Here is a map of the BSE 3 compatible with El Capitan.

    http://www.sonnettech.com/product/allegrousb3pcie4port.html

    USB 3.0 Mac Pro 2008 El Capitan

    Make sure that the card said it works with El Capitan. Some cards USB 3 is no longer with El Capitan as the CalDiget of first generation card.

    Internally the Mac can also use large HD depending on availability. However, there is a bug that first appeared in 10.8.4 and has not yet been set. To format a plu 2.2 to internal HD:

    -Use a disk utility of all Mac OS X older, including the 10.6 DVD (if your Mac can boot from it) or any of the installation DVD player or boost saved work.

    -Another solution is to move this drive in an external case and delete it there (assuming your case is modern enough to deal with readers more than 2.2 to.

    In addition,

    To sled mounting internal:

    The penetration of the screw depth for 'down-screw mount adjacent to the platters' on some readers from over 3 TB have been shortened. This may mean that the live sled down until they adjust and begin to compress the washers on the sled. If this is the case, your drive will not rest flat on the sled and do not breed with the connector backplane without additional adjustment.

  • Sansa Clip + question

    Hello, I am really considering buying the Sansa Clip + for the race, and I just want to know one thing.

    When in Shuffle mode and you accidentally skip a song, are you able to return to the song you just jump by pressing the back button?

    I only ask this because my Archos can not, she keeps just still dragging on the back button.

    Thanks in advance!

    Best regards, Daniel.

    Yes.

  • Plugged in, do not question of burden with windows Lenovo Yoga2 Tablet

    Hi all

    Need help with my windows lenovo yoga2 tablet. It shows the message as "plugged in, not load ' and the battery goes down to zero. Unable to fix earlier discussed using solutions since my battery cannot be purchased.

    Kind regards

    Riou

    The problem is solved finally. The culprit was the cable that came with the pack of USB. I replaced it with my Moto X cable that is thicker than that which is expected and my tablet started to load

  • How to pair Apple Watch again with an old cell phone is damaged?

    My old phone was liquid damaged. How can I disable my watch pairing and pair it with my new phone?

    Hello

    On your watch, go to: homescreen (via a simple press on the digital Crown) > (cog icon) settings > general > reset > erase content and settings.

    Then match it to your iPhone via the standard setting process (you may be offered the option to restore from backup, if your iPhone has been restored from a backup of your old):

    More information:

    Set up your Apple Watch - Apple Support

  • can be turned a video clip.  I want to change my cell phone video that export horizontally and I need to rotate vertically.

    Can I turn a video clip from horizontal to vertical?

    Yes:

    Adobe Premiere Elements help. Reposition, scale, or do rotate clipswith the motion effect

  • I want to download adobe flash player on my sony xperia mini pro cell phone?

    I want to download the flash player for my sony pro xperia mini?

    If I'm wrong, its an android phone. You can go to the research and play store and install Flash Player 11.

    There is a direct link to that.

    https://play.Google.com/store/apps/details?ID=com.Adobe.flashplayer&feature=search_result#? t = W251bGwsMSwxLDEsImNvbS5hZG9iZS5mbGFzaHBsYXllciJd

  • iPad 9.7 pro with or without cell phone

    I'll be traveling to the United Kingdom, Portugal, Australia. It is better to buy the cellular version of the Ipad pro? What are the benefits of the cellular version?

    TX

    Hello

    I just buy an ipad only wifi can buy a mifi dongle, they can run up to 10 currencies

    Talk or work contract anywhere you have a mobile phone signal

    See them at the shop of your mobile.

    See you soon

    Brian

  • How to record an audio clip in Premiere Pro cc with micro-USB on PC

    Hey all,.

    Difficulties in finding a solution on the web. I just made the switch to Premiere Pro CC Final Cut Pro 7, and also Mac to PC, oops I know. I'm looking to record audio clips directly in PP with my USB microphone. I plugged my microphone usb via PC Board with success. My ignorance will come here, what do I do next in Premiere Pro to start recording from my clips?

    https://helpx.Adobe.com/Premiere-Pro/using/recording-audio.html

    New! Device record voice-over in first Pro CC 2014 - YouTube

  • problems with my usb ports

    I recently got my laptop and my mouse stopped working, I originally thought it was just that the mouse was dead. After having bought a new mouse, that he has not yet decided anything, I tested the two mice on my friends laptop and they work fine.  I was wondering if there are any patches, can I do I have tried troubleshooting and that didn't work other than sending to any ideas what I could do?

    Hi cpav0625,

    1. this question comes up with other USB devices also?

    You can try to run the Fixit and check:

    Check out the link:

    Tips for solving problems of USB devices

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Help! My Sansa Clip + is no longer recognized by my PC when connected by USB port!

    Reading, the latter time, ' said, 'written' only when connected. Normally, he alternates between the 'Reading' and 'Writing' when it is connected to the PC and, therefore, it USED TO BE recognized by the PC in these conditions. The device is not recognized in Windows Explorer as a device or disk as usual. I use Windows 7. The device is not recognized by Windows Media Player synchronization purposes: I can't synchronize playlists of music more.

    You try to reset by pressing the power button / stop 20 seconds does not help.

    Using different USB ports does NOT help.

    The cable using different USB does not help.

    Another computer has NOT appeared.

    SOLVED BY TECH SUPPORT CHAT: Here is the conversation with the restorative troubleshooting following steps:

    Jonathan Bailey is me:

    Kyle Ahmed is the man of SanDisk tech support:


    Of the troubleshooting information for "not recognized by PC.
    ***************************************************************************

    Kyle Ahmed: Please tell me the exact model, color, and the ability of your Sansa player?
    Jonathan Bailey: black, Sansa Clip +.
    Kyle Ahmed: Please provide me with the ability as well?
    Jonathan Bailey: I think it's a 4 GB
    Kyle Ahmed: Please tell me when and where did you buy this drive?
    Jonathan Bailey: Citrus Heights, CA, Jan 2012 target
    Kyle Ahmed: If I understood you correctly, your drive is not getting recognized by the computer?
    Jonathan Bailey: No, it is not when connected by USB.
    Kyle Ahmed: Please tell me, are you using Windows 7?
    Jonathan Bailey: Windows 7
    Kyle Ahmed: I understand. Please connect the player to the computer.
    Jonathan Bailey: It should say READING and WRITING.
    Kyle Ahmed: very well. If you please, right click on computer and select manage.
    Kyle Ahmed: Click Device Manager in the left pane.
    Kyle Ahmed: Sansa player will be displayed in the right-hand of Device Manager: 1. USB mass storage device
    (if the player has MSC) 2. portable (if the player is set to MTP mode)
    Jonathan Bailey: he is profiled as a Portable device Sansa Clip + 4 GB
    Jonathan Bailey: a yellow exclamation point icon
    Kyle Ahmed: right click on the drive with the error indicator and choose uninstall.
    Jonathan Bailey: icon done, went
    Kyle Ahmed: In the top menu, click Action, and then select search the hardware changes.
    Jonathan Bailey: said device still WRITTEN in reading
    Jonathan Bailey: said ball driver software not properly installed
    Kyle Ahmed: very well. Please disconnect the player from the computer.
    Jonathan Bailey: ok, says still WROTE
    Kyle Ahmed: Please press on and press and hold power for 20 seconds to turn it off.
    Kyle Ahmed: Then, press and hold the Center button while connecting the device to the computer.
    Kyle Ahmed: It is on the first view the drive between the up/down/left/right button.
    Kyle Ahmed: This allows the computer to recognize the drive as a removable storage as well
    You should see it in the devices with removable storage section in the computer.
    Jonathan Bailey: it says CONNECTED then he says SAN Disk alternately
    Kyle Ahmed: Check if the drive is recognized by the computer.
    Jonathan Bailey: there is now a SANSA CLIPP (F): in my Windows Explorer navigation pane
    Kyle Ahmed: It seems that pilots of the PSG of your computer went corrupt due to which your
    Player is recognized not earlier. In this case, what you have to do is to reinstall Windows Media Player or
    change the USB mode of the player to MSC permanently solve the problem. But the MSC mode will not allow you
    by creating playlists with Windows Media player to transfer songs from your player.
    Jonathan Bailey: Windows Media Player Sync now recognizes "SANSA CLIPP"
    Jonathan Bailey: I need Windows Media Player synchronization capability or the Sansa is not good for me.
    Kyle Ahmed: Jonathan, please check if the player is displayed under the Portable devices or with
    Removable storage in the computer (Explorer)?
    Jonathan Bailey: It's showing under devices with removable storage in the computer (explore).
    Kyle Ahmed: Please disconnect the player from the computer.
    KKyle Ahmed: Please activate the drive.
    Kyle Ahmed: Then go to settings > system settings > USB mode.
    Kyle Ahmed: Then in the player's main menu, go to settings > system settings > USB mode.
    Kyle Ahmed: PSG and click the Center button to confirm.
    Kyle Ahmed: very well. Now, connect the drive to the computer and check if she gets recognized or not.
    Jonathan Bailey: OK now recognized as his former self again.
    Kyle Ahmed: If the player is now recognized and alos appear in Windows Media player, I'm wrong?
    Jonathan Bailey: I have not checked the media player yet
    Jonathan Bailey: it is recognized in Explorer
    Kyle Ahmed: Please disconnect the player from the computer.
    Kyle Ahmed: To check the version of the Firmware of the player.
    Jonathan Bailey: ok, it says REFRESHING YOUR MEDIA
    Kyle Ahmed: very well. I would like to know once you are in the main menu of the player.
    Kyle Ahmed: Go to settings > system settings > Info.
    Kyle Ahmed: Give Me the version of the firmware of the drive please.
    Jonathan Bailey: Version V01.02.16A, isn't it?
    Kyle Ahmed: It seems that the version is up-to-date.
    Kyle Ahmed: The reason why it took more time to update the media earlier must be because of the large amount
    songs that have been transferred, which can take the time to read.
    Jonathan Bailey: OK, for 2 500 songs, it usually takes about 15-20 minutes
    Kyle Ahmed: I understand.
    Kyle Ahmed: You have faced a temporary problem that was solved by resetting the player and refreshing the drivers of your computer.
    Kyle Ahmed: You should not face additional problems.

  • I'm having a problem strange sync my 4 GB Sansa Clip + with Winamp

    Sansa Clip + 4 GB

    MTP mode

    MicroSDHC 32GB

    Windows 7 64 - bit Winamp (no additional plugins)

    I recently bought a new 4 GB Sansa Clip + with a 32 GB MicroSD card. Using Winamp, I synced my library on the SD card. Everything went as not expected, no problems to report, I could play all the songs perfectly.

    But now, whenever I try to sync the SD card in the player, Winamp does not appear to recognize the files he had previously synced. A window tells me that there are X number of songs on the Sansa Clip + who are not in the library and encourage me to remove them, let them, or cancel. (photo of the box below)

    Basically, Winamp tells me again and again to remove and re - sync a load of songs that are already on the player, which is extremely long and tedious, when all I want is to synchronize an album or two. This happens even if I plug the appliance, let it cool off, and then plug it back to synchronize again.

    If anyone has had this same problem and would be willing to share the solution, me a huge favor. Thank you.

    Nevermind, I figured it. It turns out that the solution was to set the USB MSC instead of MTP mode. Who would have thought?

    Thanks for any help.

  • Structure of the menu of the Sansa Clip +: change USB Mode no display

    Hey,.

    I have a Sansa Clip + with a display of death.

    I need to change the USB Mode of DPW, Meteorological Service of the Canada.

    Can someone please tell me the structure of the menu in order to change the USB Mode put down using the screen?

    Other clues would be appreciated.

    Thank you!

    I just found the solution:

    Sansa Clip +.
    1. turn off the device.
    2 press and hold the Center button while connecting the device to the computer.

    http://KB.SanDisk.com/app/answers/detail/A_ID/61/~/enabling-or-forcing-MSC-mode-on-your-Sansa-player

    So now I can install Rockbox and set up the clip + so that it displays all the entries menu...

  • Questions on Sansa Clip + units purchased in different stores: there are slight differences?

    Hello all-

    My spouse and I bought a SanDisk Sansa Clip + 4 GB in different stores the same day.  We intend to keep only one and the packaging is slightly different, so after a brief purchase background, I have some questions as to the differences between the two in order to solicit advice as to who to keep and which you want.

    CONTEXT OF PURCHASE:

    Two units have been sold at the same price, both have the same UPC and the return of the policies/guarantees for two stores seem to be identical.  The color of each is the same (black) and the exercise of copyright for packing at the rear is 2010 for both, that is: (c) 2010 SanDisk Corpation.  We have not broken the seal on each box and do not want to facilitate the return of one.

    What is different?

    I bought my unit to H.H.Gregg here in the United States, and the number above the same UPC's:

    SDMX18R-004GK-C57

    And here's the UPC number:

    80-56-09564 - 004 G

    My spouse bought at best buy and the number above the UPC:

    SDMX18R-004GK-A57B

    And here is the UPC:

    80 56-09570 - 004 G

    In addition, those bought at H.H.Gregg indicates 'Software Rhapsody', and the Rhapsody logo under 'quick start guide' in the column of "Content" on the left side of the box while one bought at best buy Rhapsody No mention outside of the box.  And with the exception of a white banner with "Sansa Clip + 4 GB" on the face at the bottom of the box purchased at best buy, the type of packaging, graphics and colors look identical.  Both made in China.

    MY QUESTIONS:

    1 - does anyone know of any slight difference between the two?

    2. that contains software Rhapsody and the other and if so is the inclusion of this software an additional benefit?  (Never used Rhapsody, but my understanding is that it is similar to iTunes?)  All opinions on this topic is welcome, although I've never used iTunes and maybe not a similar service.  The software takes more space and it is difficult to remove if I don't want to?)

    3. I suspect the above number ending by "-A57B" (i.e. with a ' B' versus without him) indicates Sansa units shipped to the and sold through Best Buy, where the 'B '.  Is this correct?

    4. However, the numbers which could describe the difference between two low, the middle parts which are "- 09570 -" and "- 09564-"? "»  Is the '- 09570 -"a model a little later?  (Again, the "-09570-" is that of HHGregg, without any indication of Rhapsody.)

    5. who would keep you, or is it just a case of flip a coin?

    Sorry for nit-picky issues, but I recall reading some interest in the version material different numbers with the other units of Sansa and the benefits of one over the other and I was wondering if there might be a hardware update version at play here as well.

    Thanks for your time! :-)

    =================================================

    Changed to correct typo:

    The first issue of the unit to buy at best buy should have a 'B' added at the end, as I was writing it under 'MY QUESTIONS'.  It is:

    SDMX18R-004GK-A57B

    =================================================

    Edit #2 to fix typo:

    "column" vs "colum".

    jvrijn wrote:

    Marvin_Martian wrote:

    Otherwise: as far as I know, a Clip + is just a Clip + is a Clip + - no difference, at least from the point of view user and use.  It is always possible that some the bowels are slightly different (different manfs., for example), but nobody reported that.

    In fact, someone has documented who...

    "Clip + variants.

    The Clip + comes is some variants:

    • There are two slightly different OLED controllers, a new is no longer requires an offset of 2 pixels and WRT different brightness/contrast adjustment. It is versions in Rockbox.
    • The FM tuner circuit may vary, either SI4702 (old) or RDA5802 (new), this is also the case on the v2 rocket. The FM tuner circuit is versions by Rockbox. The variant is visible in HwInfo diagnostic screen in the original firmware.
    • The settings for SD card controller can vary, this is also the case on the v2 rocket. In HwInfo diagnostic screen in the original firmware, it can be considered "HERMON" (old) or "COMBO4E" (new). »

    Of http://www.rockbox.org/wiki/SansaClip

    MM-

    Interesting, thank you for researching it! I tried before that my post came but dry.

    Until then the objective eye differences?  I would be particularly interested in distinctions of subjective performance between the tuner chips, if any, that the radio will receive a daily use.  Also welcome all favor referring to other physical differences such as brightness/contrast screen.

    Still, I guess there is no way to distinguish between the two by the package box numbers and that a practical diagnosis is necessary?

    Thanks to all the other replies, in particular the ideas of Rhapsody.

    (Incidentally, I'm curious to know if there are differences in sound quality - dynamic, range, volume, all - between the Clip + and Sansa alays such as the "rocket" or same-track playback on each indistinguishable?)

    Thank you!

    JVR

    JVR, I don't think that there should be no difference in performance between them. Most likely the changes have occurred due to a different provider offering a better price on a part of SanDisk. My two readers Clip + the two appear identical in every way. And insofar as comparing them to the "rocket", I have two rockets as well, and they seem to everyone to play and hear the same way, at least using the Sansa firmware.

Maybe you are looking for

  • Reproducing an event - minimum required files

    What is the set of the file Final Cut to the minimum that I would need to reproduce an editing session (event) made by someone else on another Mac? Editior1 and Editor2 both have the same video raw images... stored in folders with the same named.  Bo

  • 3G RF Power Control Utility

    What it does and how to use it? Thanks for the replies.

  • Which DAQ devices support material Offset removal?

    I need for the acquisition of strain gauges, perform the removal of offset. At this stage, that we look at devices USB of NI 9219 or OR 9237.Do these devices to support offset instance deletion material? If this isn't the case, then, in what range ar

  • HP 5530 ENCE: Printing from computer means white border?

    When I print with my SD card in my printer, photos print very well and without any boundaries, but when I go to print a picture on any kind of photo paper, it gives me an edge uneven white around all my photos. I wouldn't be too upset if the image is

  • The last update Aspire R 13 has a digitizer pen?

    Looking at the comments of the 13 RS a year ago, she was supported for a nice digitizer pen. However, on the page for the new update of the 13 R (one with a Thunderbolt 3 port) I see no mention of nowhere - this feature has been removed in the latest