AVI files

Similar Questions

• How to open or convert the .avi file on old mac running OS.10.6.8?

  How to open or convert the .avi file on the old mac running OS.10.6.8.  We tried downloading several conversion programs as well as programs that run .avi, but everyone's message could not be opened on the mac or require a fee.  Anyone able to fix it.  We have great audio video file we need to convert.

  Try to use MPEG Streamclip; You can be told to install Perian or another component, or who does not open the AVI file. AVI is a container, not a format; no single component or codec will open all reviews, and some cannot be played or converted in Mac OS X.

  (142484)

• convert old to new avi files

  I have a Western Digital Passport external 2 TB. He holds my Holy Grail of movies. How do I see them on my new Apple Desktop since I'm a convert from dialog file without any response. I assume these are old avi files and need to convert their but how or what I download to see? Someone at - it help him?

  No need to convert, you just need a player who can handle the .avi. Try VLC http://www.videolan.org/vlc/index.html

• Stor.e TV 1.5 TB - not able to read .avi files

  I transferred .avi files from my computer on Stor.e tv and for some reason the icon on the left is a question mark instead of the usual.

  Not only that I am not able to read .avi files.
  The strangest thing happened only in some of the files (4) I was transferred.

  Can someone please help?
  Thank you.

  Hello

  Have you tried to repeat this procedure?
  Delete the files copied to the HARD drive and copy the files once more.

• What do I need play AVI files in El Capitan

  I have 3 versions of Flip4Mac and Quicktime and I can't convert or even play AVI files in El Capitan?

  How you have three versions of Flip4Mac?

• Camileo H20 makes AVI files

  Hi my Camileo H20 makes .avi files. instead of .mov Idon't know love, because I need to the MOV to iMovie on mac.
  Have someboday a suggestion?

  I think I have the solution.

  Check this thread and read the display by ukoj:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=187930

  He wrote;

  + I have a solution... the disc that came with the camaera a Arcsoft Media Convertor on that. The instructions are useless, but after watching carefully I ddiscovered 'profile 2' takes the S20 files and converts them to .mov format. You can set it to monitor the directory where you put the video files so that it starts the conversion as soon as they are here. The converted output can then be loaded where you want. +

  Welcome them

• No sound save avi files using the Camileo S20

  Hi all

  I got the s20 Thursday and it was a nightmare. Before his departure, I couldn't work in Movie Edit Pro or sony vegas video files.
  It has not yet worked in the Arcsoft software that comes with it.

  I tried it on three different computers and it continues to view with no audio signal upward.
  I tried all the codecs you can think of and none of them worked. Now, I hear no sound even when I play on the S20.
  I didn't really now what to do. I have two other hd camcorders and they work fine on my computer.

  I had to reformat my computer as the codecs it had messed up. If I had my way, I would send back and be done with it, but I have to wait until tomorrow before I can call this number that was given to me.

  What I want to know is:
  Y at - it somehow I get the avi files to work in sony vegas and movie edit pro 15 more?

  Any help or advice would be welcome.

  Thank you

  concerning
  Chrisc74

  > Is there anyway I can get the avi files in sony vegas and movie edit pro 15

  As much as I know the S20 creates h264 encoded videos.
  This means that you the codex H264 in order to get the video and audio on your laptop.
  I can't say anything about the sony vegas and movie edit pro software because I don t use it.
  But I edited my videos using the common windows movie maker and everything was ok.

• Stuttering during playback of AVI files

  I have problem during playback of AVI files on my computer, they stutter when he plays. The problem arises with a wide range of media players.

  The problem started about 2 months ago. Before that time, the same file (s) to play OK!
  The same files play OK on other computers (tested today)...

  I'm having a Satellite Pro m-30, works with XP pro SP2.

  I have tried everything I can find without success of Ant:
  Uninstalled nearly every program.
  Check the virus.
  Checked for Spy-wares.
  Stop all unnecessary processes.
  Defragment the HD.

  Help is wanted

  Hello

  Just a question: do you have this problem just with avi files or even mpg or files if you watch movies with WinDVD DVD?

• Re: 32BL702B refuses to play AVI files

  Hi all

  We just bought a 32 inch LED 32BL702B TV and while we are generally very happy with it, we would like to play AVI files via the USB port. We had initially received a model 32BV702B TV by mistake by the shop we ordered some and did not notice for a day or two (not really seen the TV) it was the LCD instead of the LED model.

  We used the USB to play some opinions and it was fine.
  We returned this model because it was lower (so we thought) to get one we ordered.

  I tried the same USB and the same files, but each would not play.
  It seems that he thinks that the file format is not recognized.
  Addressing Toshiba technical support (and explaining the above) resulted in the following suggestions:

  -Your TV does not support videos via USB (I had to explain where in the manual, it says it does!)
  -all TVs are different
  -You must have encoded the bad opinion / in a codec not supported
  -You need to re - encode in a different format
  -You can try to update the firmware

  MPG files (encoded in MPEG1/2) seem to work file. JPEG & MP3s work also.

  I frankly don't want to have to re - encode all my AVI to MPG files and therefore seeks an alternative if possible. As far as I can see there is no firmware update for this TV, at least none I could find.

  If anyone has any suggestions I would be grateful, if it goes back to the shop.

  Thanks - Robbo

  In the manual under the C run-> File Formats supported for USB mode, you can find info.

  The Media Player supports movies with the .avi extension, but the video format must be:
  MPEG2 or 1.00 Xvid, Xvid 1.01, 1.02 Xvid, Xvid 1.03 or Xvid 1.10 - beta1/2
  In addition, the Audio Layer should be PCM

  Resolution rates and few avi files must be: max @30 1920 x 1080 p 20 Mbps

  If you must make sure that all the avi files meets these requirements

• IPad - problem of AVI file

  I recently bought a camera of the fauna which records AVI video files. Once converted, the intelligent use of the Pro converter for - iPad.m4v files, I can play the files on my Mac desktop. However when I transfer the converted files (copied to an SD card using an Apple camera connection kit) on my iPad air he does not see them, and I'm unable to transfer them or read them on my iPad.

  Why play the files converted on my Mac BUT not on my iPad? Please, can someone advise if it is possible to overcome this problem.

  I understand that there is a problem of codec with iPad playback of AVI files, that's why they need to be converted BUT even when the files are converted, they do still have no game on the iPad...

  AVI is not a codec, it is a container, it can contain a wide range of codecs

  a codec means a der (co) / oder (dec), this is the true format of video and audio, or

  That's what support ios devices

  Video formats supported: H.264 video up to 1080 p, 60 fps, high profile 5.0 with AAC - LC audio up to 160 Kbps, 48 kHz, audio stereo formats .m4v, .mp4 and .mov; MPEG-4 video up to 2.5 Mbps, 640 x 480 pixels, 30 frames per second, basic profile with AAC - LC audio up to 160 Kbps per channel, 48 kHz audio stereo in the formats .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 x 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi format format

  You can use the free program handbrake to convert the media in other codecs to work with your ios device

  rather than relying on the somewhat limited use feature import connection cam then synchronize using iTunes to ios device

• How to convert an AVI file that contains several video clips?

  I have an AVI file that contains two clips of concurrent synchronised video a audio track. None of the players AVI or conversion services, I tried (Handbrake, VLC, online - Convert.com) will convert or export the two clips - only clips gets output, in this case in MP4. Any help in getting the two clips on this container gratefully received!

  Why you want to convert it? He does not play in VLC?

• 500 GB StorE TV plays is not some AVI files

  Hoping someone can help please!

  I recently bought a store TV 500 GB here in South Africa.

  The device works perfectly on AV and HDMI, am very happy with it. Except some AVI files that I have that I can play on my PC/Laptop do not play on the TV via the HDMI or AV connection store?

  I guess that the AVI files do not match the specifications of the store? If I convert to MP4, what are the best settings, size, encoding format etc. should I use? I use a program called Handbbrake.

  Thanks in advance.

  :)

  There are of course not so many people with a lot of experiences about 500 GB StorE TV so I think that you have to experiment on your own.

  Try to convert these files in other formats supported to see how it will work.
  Of course, it will be nice if you can post comments to other users. All information can be useful to the forum community.

• DVD Creator 2 Platinum randomly "flips" some avi files

  When you import .avi files to edit, program randomly "flips" some of the files. Some are returned in any screen, but play correctly in preview, and similarly, some images are returned in the form of the timeline but play correctly and vice versa.

  Have uninstalled and reinstalled and spent a long time looking at the support of InterVideo and FAQ but nothing. Help... Please...

  What help do you expect?
  Don't you think that it is a bug?

  I m not a DVD Creator 2 Platinum expert, but maybe that's a feature of s?
  Try to contact a person of InterVideo support. Perhaps the known InterVideo gusr more info on this problem and could explain why it happens

• How to combine video and audio in avi file

  I acquire my 1394 camera video image and acquire sound of my computer microphone, which is good and done separately.

  But I need to combine these two files (audio-> wav, video-> avi) in a single avi file in the run-time, which I play the avi file with the sound with other players, like: windows media player.

  Could someone give me some hint please? I asked the support of NEITHER, but they cannot give me a good solution.

  I found some companies sold the plugin, but I think that this is not my option.

  Try this place.  Download (direct link) was working when I checked.

• reading in avi files frames

  During playback of AVI files, I get an error when you try to read the frame 870 or greater:

  Error 1074395967 has occurred to IMAQ AVI2 read image

  Possible reasons:

  IMAQ Vision: (Hex 0xBFF604C1) AVI error reading framework

  Is this a limitation of the system? I have the problem even if you use the AVI read example.

  I tried to slow down the reading (2 FPS it wa), but he is always stopped at 870 framework.

  I then replaced the AVI2 with AVI vi vi: everything works well now! Opening the file now going as fast.

  I also tried the 64-bit version of LabView, but with the original AVI2 files, he too stopped at 870 fram!