[b] Satellite M30 bluetooth software - works no-advice needed! [/ b]

Similar Questions

• Satellite M500 - won't work properly and need general help

  Hi, very new for the use of the laptop wireless. bought a m500. try to go through the manual is very tiring because can not distinguish areas. having a constant problem with:

  using the satellite. walk away for a while and the screen goes black. learn that he is hibernating. should return simply touching pad touch or mobile mouse. This is not the case. all freezes and have force closing down. have done it a million times in the past two weeks. supplier contacted like touchpad wouldn't work at all, you should download the drivers but discovered touchpad simply disabled by mistake with button located below the space bar and ables 'fn and f9' set it again. Please tell us if you can.

  Toshiba has also contacted and they tried to tell me to make a back up and reset to the factory settings as a software problem could do that. the only thing we have on it is itunes. everything else is standard folders and applications.

  In addition, never made a backup of b4. How long it takes it and you can use satellite while safeguarding. ?

  Hey chucky,.

  To be honest, your ad is not easy to understand and to information that I get bored as your operating system.

  Theoretically it could be a software problem, perhaps a virus or something else so it doesn't make a difference how many programs you have installed.

  Satellite M500 doesn t seem to be a European model so I put t know exactly how HDD recovery works, but let me give you a little advice: just take your Toshiba recovery disc. This disc contains an image for the factory settings and with these settings, everything should work properly.

  In my opinion if you get the tips to restore factory Toshiba ASP settings, you should do this! ;)

• Satellite L300 suddenly stopped working - new motherboard needed

  My L300 Sat suddenly stopped working the other day.

  It kept freezing, then nothing. So I kill disked the HARD drive and tried to re - install Windows (XP).
  During the installation, he threw a message that some internal components had been installed incorrectly and has to be reinstalled.
  I was told to remove the memory cards and reposition the.

  It does not work. I thought that maybe the HARD drive was damaged, so I set up a new and started to reinstall Windows.
  Once again, same message. One of my colleagues at work suggested that the motherboard was probably U/S.

  So I've been trawling .net to find a replacement. Laptop computer out of warranty! I am told that some other mothers numbered series will work with this laptop. I really want to get a motherboard to find sound never go to work! My unit has a number of SPS to: V000138330.
  I am one with an SPS of offered: V000138390.

  Any ideas? This one will work?
  And if this is the case, it will give me the feature I used to enjoy?
  Sorry for the long history of sobbing.

  All the advice accepted with gratitude.

  ANDY-N

  Hello Andy

  Sorry, but can you tell us more about your laptop? What model do you have exactly (L300-xxx)?
  You have the European model?
  At your warranty valid for laptop?
  Maybe I've misunderstood something, but why you want to swap motherboard if the warranty is probably still valid?

• Satellite Pro L300-software-service says I need update graphic driver

  I downloaded the software http://designbyme.lego.com/en-us/default.aspx DesignByMe

  The installation runs without a problem, but when I start the program it restarts again and again. The charge of doesn´t photo entirely, instead of this there are black spots. I have can´t click on anything that either, or near programm. I thought that maybe the installation process has not completed correctly so I downloaded the software again, but the problem is always the same. I m using a new Satellite Pro L300 28w with Windows 7 and Mozilla Firefox 3.6

  I contacted the support of lego and they replied: "probably you need to update your graphics driver. Please contact your customer computer manufacturers website for updated free"

  Is this possible and if so what edo upgrad I need?

  Hello

  I put t know if the update of your display driver can solve this problem, but if the manufacture of the software said that it s worth a try! ;)

  The update is simple enough: first download the latest version here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you have downloaded the latest version, remove the old first. Check the list of software in the control panel and follow the instructions on the screen. I guess you have to do a reboot and after that, you can install the downloaded version.

  Good luck! :)

• Satellite A100-011 - Bluetooth not working after installing Windows 7

  Hi, I have a Satellite A100 - 011 (PSAARE) and I tried to install windows 7 on it.

  I used the installer of the software of toshiba for windows 7, and in Device Manager, all of the devices seem to be properly installed. (There is a disabled person, or an unknown device). However, I can't have my bluetooth appears or use it. I tried to install the 3.00 Vista bluetooth stack, but it didn't work. Why isn't my bluetooth device and function appear anywhere in windows 7? Someone at - it had a similar problem?

  Let me add that the WiFi is working normally.

  Hey,.

  I m no owner of the Satellite A100 but I think you need more recent Bluetooth software and drivers for Windows 7 to Vista place

  Check Toshiba Bluetooth portal for the latest versions:
  http://APS2.toshiba-tro.de/Bluetooth/

• Re: On Satellite U400 Bluetooth does not work with windows 7

  Hello

  I have no model of Toshiba laptop U serious (satellite U400 - 10 L): PSU40E-00F00WAR) is XP OS. but I change to windows 7
  Since bluetooth does not I tried all the driver but not of their work

  can someone help me?

  Thank you
  Best regards

  Post edited by: DKNY2000

  Hello

  I think that you have to install [bluetooth software | http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]

• Satellite P305 - Bluetooth does not work

  I am new to Bluetooth and I have a new Toshiba Satellite P-305. It did not come with Bluetooth.

  So I bought a dongle (actually 2) and they both install the drivers via BlueSoleil.
  Then I find that I need an another Version of BlueSoleil for my 64-bit machine.

  So I download and install, and find that it crippled unless I have buy this version 6.
  But my requirements are few, just a link with my Verizon LG 8550 cell phone works online.

  Can I get the drivers for my dongle to load and then I remove the Bluesoleil program and load the BtMon4Inst.exe, but after awhile the drivers for the dongle disappear and I am without Bluetooth operation.

  I think got less drivers 64 bit Bluesoleil 6 version package Bluesoeil program because I can transfer photos between my phone and laptop. But when I look at the

  Bluetooth devices from phone I have a lag of incoming com ports as phone I have port entering 29 and in the Device Manager, I have the port entering 28.
  What Miss me to get a phone to the computer's bluetooth connection.

  If you want to use the software BTMon, remove the Bluetooth software that came with the USB adapter to avoid conflict.

• Function FN keys don't work no-Satellite M30-107

  Hi all

  I have an old M30 - 107 that I recently reinstalled and updated the operating system.
  The function keys control the screen brightness, volume etc. do seem to work.
  I think that I've updated all the drivers for the laptop.

  Is there a specific driver (ie the chipset driver package) I should be looking that control these function keys or should they train with intervention of Ant in a pack driver bios etc. related?

  Satellite M30-107 XP edition SP3

  Thanks in advance... C.

  Satellite M30-107 is a part of the PSM30E series. Is this good?
  You can see this number when you look at the bottom of the unit. There should be a label with the model number.

  Go to the page of European driver of Toshiba and searching for archiving.

  Choose + Archive-> Satellite-> Satellite M Series-> Satellite M30-> Win XP +.

  You must download the * common Module *.

  This common module must be installed first!
  Then, you need to install additional software like Touch Pad on / off utility Hotkey utilities for display devices.

  These programs will allow the Fn keys

• Satellite M30 - 344 - USB 2.0 no longer works

  Hello

  Since 2004, I have a Satellite M30-344. Some time ago, I changed my system from XP home to XP pro and my USB 2.0 no longer works since. I need to use XP pro because XP home does ' t run some CAD software that I use. Can I do about this problem? I could not find the USB drivers in the Toshiba downloads.

  See you soon,.

  Kat

  I agree with Sascha.
  But you also need to install SP2!

  This is necessary and important. I put t know if you already use the SP2 or not, but it must be installed on your laptop to get the USB ports work!

• Satellite M30-106: USB Ports not working not

  Hello.

  I have a problem with my Satellite M30-106. One day, the system froze (Windows XP with SP2) during the passage of the machine off. I was forced to keep the button "power" for a while in order to close the system. However, since all 3 USB ports do not work.

  The system does not recognize the "" them. I can't see in Device Manager. I tried to reinstall the system, but it did not help.

  Can someone help me, pelase =)

  Hello

  It looks like a hardware problem. At whatever it is connected to the USB ports at the time? Could you check the USB ports visually and see if they are damaged or wobbly. It is a bit of a long shot, but you may have a short circuit decision and which could disable the USB.
  If the motherboard is damaged then outside fixing/replace your only option would be a PCMCIA USB card, they are not expensive.

  Best regards
  Swarvek

• The screen is black, but working satellite M30

  I have a satellite M30, I was watching a movie through another monitor when the battery is dead.

  Now, when I restart, the screen is blank. If I attach to the other monitor it works fine, but pressing the "Fn + F5" key will not bring my screen to life.

  All ideas are welcome.

  Hello

  The Fn + F5 key combination is one of the two screen options for change.

  I think that you will find an option to change the display in the properties of the graphics.
  You must mark the monitor 1 and check the use this device as the primary monitor

  I think that this should allow the screen of the laptop.

• A USB port is not working on Satellite M30 354

  Hello

  I have a problem with my Toshiba Satellite M30-354.
  I bought and I use a stick of O2 in Germany (HUAWEI) surfing.

  I used it regularly in one of the usb port, but two days now I can use it in one of the usb ports and if I try to plug it into one of the other, so I can't connect!

  It seems a problem of usb port but I don't know. Any help please?

  Yes, it looks like one of the ports USB does not work properly.
  Try reinstalling the driver for the USB port again.
  In Device Manager, you will see all the USB ports/hubs/controllers.
  Delete, delete all devices in the Device Manager list and reboot the device.
  The Windows operating system should recognize all the ports again
  And notes; Disconnect all usb devices before that you would like to try this out.

• Control buttons not working not not on Satellite M30

  I seem to have a problem with the command buttons on my Satellite M30. They do not seem to work. I reinstalled the drivers of control on the Toshiba site, but the buttons still don't work.

  Can anyone help please. Thank you, Joe

  Hi Josie

  If you wrote about three buttons under the power button on the left side, they should work if the properties of controls on Toshiba is installed correctly. You can launch it from the control panel.

  Check please if you can configure the buttons with different options.

  By the way: you did a new install of OS (no recovery media)?

• Satellite M30: FN keys not working not not after installing IE7

  I installed IE7 and noticed that the fn keys no longer work. (Satellite M30)
  I don't know if it was the catalyst because I do not know how long the problem has been.

  The only ones I use often are FN + f6 and f7 +.
  I really need to be able to adjust the brightness of the screen. Any help would be appreciated.

  Thank you.

  Hello

  First lights up the screen can be changed also in the Toshiba Power Saver utility.

  But it s very strange that, after the IE7 update the FN keys stopped working. I installed the IE7 on my laptop, and the FN keys still work very well.

  So maybe it of a simply wrung something in the registry. Who knows?  :|
  I recommend reinstalling the common Modules.

  Maybe it helps!

• Satellite A300-1MC (PSAG8E) - get Bluetooth to work

  Hello

  I just bought a toshiba satellite a300-1mc and cannot get the bluetooth to work on it. ???

  The box says it has built in bluetooth, but even when I reinstall the bluetooth stack he will not recognize the built-in bluetooth device, it just says: connect a bluetooth device and press ok or cancel the installation? I can't take this wise because it only picks up the built-in bluetooth device?

  I checked the hardware Manager and can not still find something to do with bluetooth

  Any help would be very appreciated that I could really do with the bluetooth on my laptop.

  The box say it has bluetooth, it's why I can't work on why I can't make it work

  I'm not sure that if I deleted something... when I first got this laptop, it took about 5 minutes to start so I disabled a startup programs load... but I do not remember stop bluetooth... and I checked to see if I disabled something.

  HELP me please lol

  Rolex is right. I ve checked the specifications specification and Satellite A300-1MC is delivered without BT module. :(