B200-M4 Board controller activation failed

Similar Questions

• Activation failed for controller board B200 M4 7.0 with UCS Mini 3.0 firmware (2 c)

  The blades of B200 M4 comes with firmware of the controller Office 7.0 and the UCS Mini comes with the latest code of 3.0 (2 c).  Once associated with a Service profile, the firmware controller board 7.0 activation fails.  The blade software 3.0 (2 c) comes with the 6.0 Board controller firmware.  I downloaded the firmware 2.2(5a) blade server package, so that the UCS to 'see' the firmware 7.0.  Then, I changed a bunch of firmware 3.0 (2 c) host to include firmware controller board for the M4 B200 but activation 7.0 still does not work after reboots.  Reacknowledging the blades does not change the result.  Any ideas?

  Michael,

  You did the right thing by adding the 2.2.5a firmware.

  Were you running CLI activation?

  #scope Server X / Y (blade chassis X Y)
  # scope boardcontroller
  # Display image (this will list all versions of firmware)
  # enable force version.0 firmware (Select a version lower than that already running)
  buffer validation #.

  If the foregoing is successful then reset MMIC

  Try--->

  In the firmware of the political host do not check the controller board for the B200M4 leave the field blank. Then manually activate tab firmware installed in the server.

  Kind regards

  Saurabh

• Compatibility of controller for the B200 M3 Board

  Can someone check its compatibility with controller board for a B200 M3 server work us to the 2.1 (3d) version of the firmware and have just received new blades. They came to the same version of firmware, but the controller board is at version 13.0 while all other servers in the environment are to version 11.0.

  I get an error that the service profile cannot be filled by the Board of Directors-updated controller not supported...

  Thanks in advance.

  Maybe its related to

  https://supportforums.Cisco.com/discussion/12265636/Board-controller-not...

  Controller board can not low rating from 13 to 11.

  Can you please send the error message!

• Remote Graphics Software: Remote Graphics Software activation failed

  Hallo,

  I had to replace an old workstation with HP Remote Graphics Software (the workstation of the sender, the machine with the reception part is always the same) on this subject.

  Since the installation of RGS 6.0.1 on the new machine, I get a pop up whenever I connect to it:

  Advanced features activation failed

  Already, I discovered that this has something do with activation without the software work.

  Version of the sender is 6.0.1 as shown above.

  Version of receiver is 7.0.1.

  There are two different versions, because it was setup on the old sender (with always the same receiver machine) and it worked very well there.

  I also tried the newer versions of the sender, still does not.

  As far I knew the remote software activation should occur automatically when having an internet connection.

  I have internet and no proxy or something fancy.

  By coincidence, I found an article that describes the manual setting of the license server in the island of receiver config.

  There was still an old man and I changed it to the last (I hope):

  　

  15.0.92.201

  Same settings for the firewall on the old and the new sender's machine.

  He worked with the old machine, we also have another pair of workstations transceiver, which work fine as well.

  I now use the license file, from the old machine to the new machine.

  Could it be a problem (although I did not see a MAC address restriction in the license file itself)?

  Best regards

  n7c

  To activate the speed of HP or STROKE with RGS receiver versions 7.1.1 (or earlier version) the activation server address must be changed by editing the Configuration file of RGS receiver or using the receiver RGS (details below) Configuration tool.
  RGS receiver Configuration file
  The RGS receiver Configuration file, rgreceiverconfig, is located in both
  C:\Program Files (x 86) \Hewlett-Packard\Remote graphic Receiver\regeceiverconfig (Windows)
  / etc/opt/hpremote/rgreceiver/rgreceiverconfig (Linux)
  Locate the Rgreceiver.Registration.IpAddress property in the file, it uncomment and set it as follows:
  Rgreceiver.Registration.IpAddress = 15.0.92.201
  RGS receiver Configuration tool
  With RGS 7.1 the server address can also change with the receiverConfigApp.exe on Windows or receiverConfigApp.sh on Linux. The address of the server is in the Activation tab.
  Also find URLs for the authorization of RGS user guide
  http://h10032.www1.HP.com/CTG/manual/c01624233.PDF

  Best regards;
  REDA
  I am an employee of HP
  Please click the White Star Kudos to say thank you for helping.
  Please check accept as Solution if my help has solved your problem.

• Activation failed on iPad 2 after updating iOS 9.3

  Activation failed on iPad 2 after updating iOS 9.3. What to do now?

  Wait a bit and try again. If you still can not turn on, contact Apple support. -AJ

• R050sa flow 11: Activation fails after a clean install on laptop pre-installed Windows 10

  I just bought a HP notebook 11 r050sa stream with Windows preinstalled Home 10, but could not start when it opened its doors to the top (circle kept spinning turn for hours).

  As I was intending to do a clean install anyway, to remove any HP bloatware, I decided to delete all partitions and perform a new installation from a USB key using the official Microsoft Media creation tool for Windows 10 Home https://www.microsoft.com/en-gb/software-download/windows10.

  Installation went well but the activation failed indicating that I have "do not have a digital right.

  How is this possible, since the PC came with Windows preinstalled 10? How can I get my license back?

  There was a surprising new twist in this question, should I report it here in case someone else is in the same situation.

  When I received the activation failed I reported to my original request, I had done the installation using the edition entitled 'Windows 10 unilingual homepage' (see figure below), which seemed to me the only option if I wanted to install "Windows 10 home" which is preinstalled on my laptop.

  Yesterday I did a last attempt at creating USB installation after selecting 'Windows 10' (see figure below). Yet once, I removed all partitions on disk and performed a completely clean install on my HP notebook 11 r050sa flow.

  The result is that, in the end installation smoothly, I found my computer with installed "Windows 10 Home" and fully active, without the need to insert an activation key of windows, with all the drivers installed automatically by Windows and without any HP bloatware!

  I'm puzzled by the outcome, but happy...

  

• Online and automated phone activation fails for XP Home

  Activation fails for me for Windows XP Home Edition, after changing a lot of material. Online activation failed. I called the automatic activation phone number where I give them a "ID of Activation" appears on my screen and I like that it is not valid. Microsoft support site sends me to a web page that sends me to a web page that sends me to the first web page.

  How do I get this active?

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.

• An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  The error was: "an existing connection was to be closed by the remote host".
  (0 x 00002746 WSAECONNRESET error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps

• Activation failed

  I bought a new desktop computer and I install my windows 7 pro. Wen am trying to activate the activation failed. What can I do?

  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-0xC004C008

  What do you hear no progress with the activation of the phone?
  you need to speak to a representative of activation:

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.

• I bought a 3 system Windows 7 upgrade and activation failed for the 3rd system. How can I fix it?

  I'm fairly certain that only 2 of the improvements have been used to move Windows 7 Vista systems. Now I try with a 3rd system, originally of XP but activation fails.

  If you have the 'Family Pack' for Home Premium, its not uncommon for that to happen. Try to activate by phone.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Windows 7 activation failed because no system on the SSD before installation.

  Hi, I just updated my computer and I have installed the version of win7 upgrade.

  I got the error activation failed because there was no system on the SSD before installation.
  Instead of having to do all that again (install xp and win7 or reinstall win7 then win7) I did a registry change
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\OOBE has changed the 1 to a 0 and restarted
  Entered the CD - Key and got the error
  [code]
  On a computer running Microsoft Windows non-core, run "slui.exe 0x2a 0xC004F061" to display the error text.
  Error: 0xC004F061
  [/ code]
  activate Windows then told me, "the product key you entered cannot be used to activate windows on this computer".
  Then I tried the thing about the phone call.
  has chosen country as the Iceland's nearest.
  received 2 numbers
  800-8236, I get the message that this number is not in use.
  + 47 23 162 126 there I have the language Norwegian (or something) answering machine
  What can I do?

  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-0xC004F061

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• Activation failed for CS3

  I'm trying to activate my web for CS3 premium software.  I got the serial number, but did not have my previous version number updates.  Adobe has not in the file either, but a stimulus/response from hack to get around this and get to the activation screen secret.  Then activation failed with the error code 194:3, what they told me to come here for help.

  HEEELLPPPPPPPPP

  I NEED to get the software running.   What should I do now?  What does this error code?

  Well, I think that I use now.  Thanks for your help.  I don't know what he has done well.

  I deleted everything we discussed.
  I also reinstalled it under a new admin account.

  But while I had to contact customer support for help without going through the issue of updating the serial number again.  And they gave me a new serial number instead.

  So it could have been one of those three things that made me work.  Thanks for your help.

• activation failed RPF first pro 1.5

  After changing the hardrives in my system, my adobe product activation was no longer possible. It seems as if the activation server is no longer accessible. Even proposed by the programe such telephone activation failed. It seems as if the activation codes used in 2004 (the year of purchase) are no longer valid... Please send me suggestions for this problem

  You MUST download the special version of the page as ann posted, that will work without having to be activated

• Qosmio X 500-10T - integrated controller has failed

  : The embedded controller (EC) has failed in the specified time-out period. This may indicate that there is an error in the EC hardware or firmware or BIOS is accessing the EC incorrectly. You should check with the manufacturer of your computer for an updated BIOS. In some cases, this error may cause the computer to function properly.

  Hi all

  Now, I get an error very very annoying.

  Qosmio X 500-10T is freezing with more frequency with the message above in Event Viewer.

  I reinstalled Windows 7 to factory settings and added all fixes Windows 7 etc with no luck to solve the problem.

  I also installed last BIOS update.

  Any ideas what to do?

  Thank you.

  Hey Buddy,

  I agree with the user above. If you have already reinstalled Windows 7 back to factory settings and installed the update to the newest BIOS, it seems to be a malfunction of the equipment. In this case, you need professional help from an authorized service provider:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  If your laptop is under warranty, the repair process is free for you. :)

• Qosmio X 770 - system + all the apps report controller active Intel, not GTX560M

  Hello world

  According to the thread topic:
  All of the apps report active control Intel, not GTX560 M + X 770-system?

  I just bought my family a Qosmio X 770 and window system report more games like Diablo III report that the Intel HD family control is the active video card and not the GTX560M?

  How can it be? The computer is directly from the factory. Both are active, do I have to manually disable the Intel controller in the system Panel?

  It looks super weird for me that such a thing exists.

  Please advise, that would be much appreciated!
  TIA.
  Lorelei & family.

  Hello

  You can't disable the internal Intel graphics.
  The point is that it is controlled automatically if the graphics card supports nVidia Optimus technology.

  If the application needs complete graphic performance, the external nVidia chip will be used.
  If the application does not have good graphic performance, the internal GPU Intel would be used to save energy.

  But of course, you can assign the GPU in a single application.
  Here's another thread on this topic.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=67755