B210 printer

Similar Questions

• Can I add a duplex on a Photosmart b210 printer unit?

  Hiya.  I have a Photosmart b210 printer and received a two-sided printing unit.  It fits into the printer without a problem but, as we know, there is no option of dulex based on the menu print.  I think I have a 210 or 210 b, can I download the driver of a different model (c or d) and get the duplex unit to work?  Or have I received a gift very nice, but ultimately useless,?  Any sharing of knowledge very appreciated!  Thank you

  Hello

  B210 hardware is not compatible with the accessory automatic duplexing.

  Any alternative driver does not solve the problem, because the hardware does not support.

  As you can find for sale listed by the specifications below, only manual duplex supported by the printer

  http://h20195.www2.HP.com/v2/GetPDF.aspx/4AA2-1685EEE.PDF

• Reinstallation of HP B210 printer on computer laptop operating system: Windows 7 64-bit

  Hello

  PC:HP Pavilion DV7 Notebook PC Windows 7 Home premium 64-bit SP1

  I also have the problem with reinstalling my HP photosmart B210 (network)...

  I have a few days after the HP Support Assistant update, I lose the possibility of active my scan to PC.

  I have uninstall a SW B210 printer and can't reinstall the computer WIFI connection (using my CD). Can't install USB connection

  With the help of SW PSB210_1315 installation hangs... only info: internal error!

  I have also 2 other PC

  1 8 32-bit windows-based installation of PSB210_1315 without error

  1 Windows XP install PSB210_1315 without error

  I can use my printer for ePrint!

  Intenting CD WIFI connection SW installation using I see my printer with the right address... but always failled connection...

  I used ccleaner to clean my PC also used sfc... no error...

  I think that there is something that does NOT make the connection WIFI from PC to the printer...

  Thanks for any HELP

  Hi gvaneynde,

  If you are successfully able to install this printer on two other computers, which indicates that the printer and software work. It is possible that there is something on this operating system of computers contributing to the failure of the installation. Follow the steps outlined in the document below and let me know if this helps to get the printer installed?

  Fatal error ' error 1603. A fatal error occurred during installation "(MSI error 1603) displays in HP Software Installation in Windows

• I get the 0xc19a0042 ink system failure on my HP Photosmart B210 printer

  I followed the instructions for disassembly and cleaning the printhead twice, as well as to disconnect and reconnect and the 0xc19a0042 ink system failure message continues to show and I can't print or scan with my B210 printer. I now seek to replace the print head, but could not find the info on all the links from HP that I have searchded. Any help suggestions greatly appreciated.

  And if you are in the United States and want to order it from the hp online store: http://www.shopping.hp.com/en_US/home-office/-/search-Browse?SearchParameter=%26%40QueryTerm%3DPhotosmart%2BB210%2Bprinthead%26prodsubgrp%3DPrintheads&PageSize=15&SearchTerm=Photosmart+B210+printhead

• B210 series printer all in one: new Windows Mobile HP 10 now my HP B210 printer prints blank pages

  My all photosmart printer B210 worked flawlessly with my laptop Gateway using the Vista operating system. Laptop was replaced by a new HP laptop running Windows 10. Message to get the printer to print but the pages come out blank. I just bought all new cartridges, never had a single document to print, all the test arrived in beautiful color pages. Now the ink levels are very low, black was very weak, so a bought a new set of cartridges, very expensive and yet the pages come out blank. The downloaded drivers, I use wireless connections. What's wrong.

  Hi @cja13,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a HP Photosmart Plus e-all-in-one printer with a computer Windows 10 and pages are coming in white. I would like to help with that.

  Try to make a black copy using the control panel of the printer.

  If this page comes out blank, try following the steps described in this support document - color or black ink not print.

  If the copy success I download and run the HP print and Scan Doctor to check the installed software. This tool can diagnose and solve many problems of printing software and printer.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP photosmart B210 series: Photosmart B210 prints only partial pages then stops (Mac osx)

  Hello

  My printer HP Photosmart B210 more often than otherwise, print documents of the half, then stops mid page and eject half print. For images, word documents, PDF, and 4 x 6 photos, as well as wireless printing, or plugged directly on the USB printer.

  What happened for a few years now, over different versions of mac os x.

  'Help!' he seems to get more frequent... :/

  Greg

  Welcome @greg_a_leg,

  Thanks to their participation in Forums of HP! I see by your post that the complete documents are not printing from different applications. I will definitely do my best to help you.

  Try a self-test printing material in order to exclude a hardware problem: print a Network Configuration Page.

  If you haven't already done so, repair the permissions of the drive on the Mac:

  • Repair disk permissions:

    • Click on your desktop so that it is written next to the Apple Finder icon, and then click Go (you'll see it next to the Finder after file, edit and view).

    • In the context of Go, click Applications.

    • In Applications, select utilities.

    • In the Utilities folder, you will see the disk utility, double-click on this icon to open the disc utilities.

    • Click on your hard drive, and then click first aid. Click Run to allow it to run.

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Let me know how recorded the name of the printer in the Printers & Scanners window.

  How is the printer connected?

  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

• My HP Photosmart B210 printer has a paper jam and I can't delete it.

  How can I clear a paper jam?

  Post proposed by the host to the appropriate forum category (for Windows |) Windows 8 | Failures of performance & system for Windows | Windows 8 | Hardware & drivers). ***

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  HP - B210 troubleshooting - how-user Guides - more
  http://support.HP.com/us-en/product/HP-Photosmart-plus-e-all-in-one-printer-series---B210/4021933

  HP support/troubleshooting & drivers
  http://WWW8.HP.com/us/en/drivers.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ================================================

  The main issue is probably the drivers, but these can help:

  Windows 8/8.1 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8/8.1 - How to solve printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8/8.1 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8/8.1 - find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-8/find-and-install-printer-drivers

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Photosmart more B210: printer HP B210 connected to the computer with windows vista is not print documents

  Have had the above printer and computer wireless without any significant problems of printing until yesterday when I couldn't print liked anything from my computer. I disconnected the son / the power of my printer and router, waiting a few minutes and then reconnected the accounts.  Then I restarted my computer and retries impression with unsuccessful results. I then run the wireless network Test and the report does not show any problem.  Anyone have any suggestions to solve this problem.

  Thank you

  Hi @kattok001

  I see that you have had the minimum printing problem in the past, but suddenly you cannot print at all despite your efforts. I'd be happy to help you with this!

  Let's start our trip with HP print and Scan doctor. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

   

• Photosmart more B210A: B210 printer, error message "Scanner component is broken.

  Out of the blue, the control panel flashing. "Turn the printer off and on again. If problem persists, compenent scanner is broken and you will not be able to scan, photocopy"was after no use in a week. Had not analyzed in more than a month. Turned printer works. Scanner bar makes a horrible noise as it slipped into the glass back on the start of the printer and I get the same message. Click OK, and now all I can do is printed. Any help as to why after not using the printer and no use of the scanner that it would happen? And perhaps how to fix without having to buy a new All in One Printer?

  Hello Macguyver,

  It seems to be a problem with the scanner and the printer needs to be REPAIRED.

  Please call the HP Technical Support for assistance.

  If your printer's warranty, you can be equipped with a resume option.

  If you are in the United States, toll-free # is 1-800-474-6836

  If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

• HP Photosmart more B210 - printing is too high on the paper.

  The text is too high on the paper.  I can solve this problem when you generate letters and reports, etc. by simply letting a larger margin superior, but I cannot produce sheets of labels.

  I tried to change the paper size under tray settings/Main properties/device of the "letter" to "A4" - click on apply and OK - but when I check that the setting is always "letter".  Don't know if this is causing the problem, but if the book 'Letter' measures are lower than those of the A4 paper, he could be--and I wondered why I couldn't set this parameter.

  The printer is related to the Windows XP laptop and desktop Windows Vista computers.

  I hope someone can help.

  If the changes are not stick when made directly in the driver, the driver is probably corrupted. Try to uninstall and reinstall the printer driver and software package. I'll link the latest version below. Let me know what happens.

  HP Photosmart full feature software and drivers

• New ink print head error on Photosmart Plus B210 alert

  My HP Photosmart Plus B210 printer has suddenly started giving me the following error message:

  "New alert ink print head.

  Used cartridges may not be not all print head start.

  Install the new cartridge or press OK to continue with those used. »

  It was new HP brand cartridges when I installed them. I printed earlier today without any problems and did nothing for the printer before the error.

  (I use a 32 bit Windows Vista OS on my Dell Inspiron 1525 laptop and am printing via a wireless router.)

  -What it means and how to fix it? When I try to print, it just says: "print" on the touch screen but nothing prints ever and when I try to stop it, it freezes and I have to unplug it.

  Thank you!

  First try printing a self-test page.
  1. click on the setup of your printer
  2. choose reports
  3. click on the status page or printer self-test report

  Here is another link that can help you with the cartridge.

  http://goo.GL/gudAL

  Let me know if this can help, thank you.

• Install HP Photosmart B210 fails (network) - "Printer Installation Failed" error messages

  Hi - I have a HP Pavilion Elite HPE on a home network with a wireless HP Photosmart B210 printer/scanner.  This configuration has worked for > 1.5 years, then about 2 weeks ago, I could not print from any application.  Win7 would post "cannot communicate with the printer.  Here's what I did:

  (1) uninstalled - reinstalled driver SW repeatedly - however, Win7 messages "Failed installation of the printer" at the end of the installation.

  (2) the HP print and scan doctor finds the printer wireless-, but can find no defects or problems. All green checkmarks

  (3) I copied/pasted the address of Web page in IE - in the Home tab's built-in Web server it States "system error - network connection error.

  (4) scanning works fine wirelessly and if I connect the printer via a USB cable - I can print.

  (5) I have a Lenovo and Ipad desktop computer on my network that impressions wireless - so, seems, the issue is with the Elite HPE only and not the router.

  (6) if I'm in Excel and select search for printer - I get the error "domain services active directory are currently unavailable.

  (7) I checked the printer spooler and it is started and set to automatic.

  I want to keep the ability to print wireless, however, if I can't solve this problem, I have to constantly connect via a USB port.  Any suggestions on what is wrong?  Thank you, Rob

  Hi Erico,

  Thanks for the reply.  I ran the "sfc/scannow" command from the line CMD (run as administrator) - completed without finding any breach of integrity.  I reinstalled SW from HP (PSB210_Basic_x64_231.exe) and installed without problem.  I was able to print a test page and a spreadsheet excel via the wireless network.

  It seems that this problem is solved.  Thank you for your help.

  Kind regards

  Bob has.

• HP photosmart Plus B210 series - prints blank pages

  Hello, I got the printer above for about 4 years with no problems. He suddenly started printing blank pages. I went through all the cleaning cycles, alignment etc., but without success. I bought a new genuine HP print head and installed new cartridges and still once, it prints blank pages. The message I get is that alignment process has failed. Does this mean the printer is down and I'll have to buy a new one, or can you suggest a solution? I went through all the steps suggested for this type of printer on your forum, but I still get blank pages. It is a disaster for me and my wife whose work depends on the network printer. Any suggestion would be appreciated. Thank you.

  Hi @drbince,

  Given you have changed the print head and the problem persists, according to me, maybe it's time to consider a replacement printer.

  Alignment is a failure because the printer does not black. If you have followed all the steps in the following document, it might be time to give us a call to weigh your replacement options: HP Photosmart Plus B210 printer - color or black ink not print.

  If the problem persists, what you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number

  File number and phone number are displayed.

  If it meets your needs, please consider tagging this post as solved by clicking accepted as Solution below and others can find the answer more effectively.

• printer driver for HP Photosmart b210

  I need the printer driver for my HP Photosmart B210.

  The site says HP HP no longer supports this printer (seriously!)  and there is no obvious method for obtaining this driver.

  I tried other websites, but the drivers do not - download must be centers of virus.

  Seriously, what is happening with obtaining a program?

  Hello

  HP probably the Photosmart B210 printer support site, you can download the drivers by selecting your operating system below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=4021935&task=&

  For any questions do not forget to specify your operating system version.

  Shlomi

• Stop printing applications

  How can I stop print form my hp photo smart apps more B210 printer?

  Hello JerryBaxter,

  If you're talking about an application of expected delivery who keep printing even after being abducted, then you must follow these steps to cancel regular printing and delete the app.

  Important: You must cancel the App of Print delivery scheduled for ePrintCenter before removing the application. If you do not cancel the App first, scheduled tasks continue to print, even if the application is removed.

  1. Sign in to your account on http://www.ePrintCenter.com.
  1. Click the tab for your HP printer, if there is more than one registered to your account.
  2. All remaining on the "printers" tab scroll down to the "My Print Apps" section and click the application you want to cancel the subscription of delivery.
  1. Click on "Setup".
  1. Click 'update settings '.
  2. Click on 'Cancel the delivery' at the bottom of the page. (highlighted in blue)
  1. Click on 'Cancel subscription '.

  The intended application of the Print delivery icon is still listed on screen in Control Panel of your HP product, but planned deliveries are actually cancelled. This allows you to access the Print App for delivery on demand at any time. To completely remove the print estimated delivery application, proceed to the next step.

  Follow these steps to remove completely the scheduled delivery Print App. remove the App to print delivery on demand ensures that it does not or on the control panel of HP ePrintCenter product.

  1. Sign in to your account at http://www.ePrintCenter.com.
  1. While remaining on the "printers" tab scroll down to the "My Print Apps" section and with the mouse arrow hover over the App you want to delete.

  Click the Red 'X' next to the word 'remove' in the upper right of the application.