B210e printer works but allow me to replace the cartridges

Similar Questions

• I got a low ink warning on my mac for my printer epson artisan 837. I replaced the cartridge, which was low, but he still reads the low ink level on the mac, but full bed on the epson Control Panel.

  Well, I replaced the cartridge as usual, and osx is not that the printer is now complete: says, "printer may be out of ink" on the status. Ink levels will be not displayed via the computer but check out on the printer.

  Restarted both units and in vain.

  WiFi is not a factor.

  If anyone has a solution or any ideas, please help.

  Thank you!

  You can try to disconnect the printer, restart the computer, reconnect with the printer, and then try again.

• Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly on the guest user

  Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly fine on the guest user. Have you tried restarting and it still does not work.

  The problem should be solved now.

  Otherwise:

  OS X

  iOS

  Workaround for problems with the Safari address bar

  http://osxdaily.com/2016/01/05/fix-Safari-freezing-address-bar-use/

• Canon printer works, but nothing is printing

  Printer works but nothing is printing.  Do not have an indicator that the ink cartridge is empty.  No warning.

  Hello

  · What is the model number of the computer?

  · Were there any changes made on the computer before the show?

  Check is it y of error codes and error message appears in Event Viewer: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

  You can also follow the steps listed in the link below: printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• Re: Deskjet 3070 - replaced the cartridges but does not now print!

  I have the same problem with my printer Officejet 6700 Premium. I just replaced all the cartridges with HP new ones. The printer is now going through the motions but does not print blank pages. This happens for all what I am trying to print including Diagnostics pages. The printer is a little older a year is not under warranty. Any help would be greatly appreciated!

  Hello twoshirts,

  I saw your other threads, and I understand that you have completed all the procedures listed here troubleshooting: printer does not print black ink or color of ink or prints blank Pages without success.

  I would like you to follow the steps below:

  1. reset of the printer, please make sure that you plug the printer directly into the wall, do not use a surge protector or power bar, they can cause the printer is in an error state and lose features of base over time.

  2 a 'cartridge problem', "Ink cartridge failed" or not "compatible ink cartridges" Error Message appears on the all-in-one, I know you did the cleaning steps, but, if you please, reinstall the cartridges and perform all THE steps listed

  3. now go ahead and run HP print and Scan Doctor- it has been designed to provide users with HP and features troubleshooting fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  I understand that you are not able to print diagnostics from the menu on the front panel as well, but want to see if the PSDR detects all conflicts in the software or drivers.

  Please let me know the results.

  Thank you

• Office Jet 6500 E710n-z will not print black even just replace the cartridge with a new one.

  This is the 3rd time having problems on "black" even printing ink isn't empty (but the level is low, like a quarter left).  In the previous cases, I replaced the cartridge and the problem resolved.

  The 2nd time was last week.  After I changed the cartridge, it worked (for only 1 week) and the problem is back.  As the ink is full this time and it worked fine when I just changed it, I suspect it is the problem of my printer instead of the cartridge.

  I did clean the print head and align the print heads, but the problem persists.  Please advice solution.  Thank you!

  I hope that the printhead has no need replace. I would like to look at this document on faulty production for your printer model.  I know some steps here mentioned you already make. Please just read / ignore those and try the ones you have not yet completed.  It presents various ways to clean the print head; If you have just done the cleaning of the box tools, I'd defiantly that manual. It also has a ride to make sure that the product firmware is up-to-date.  Here is the link: http://support.hp.com/us-en/document/c02455482

  I hope this helps.

• I wrote a batch file in Notepad using win XP, it works, but when you are finished, the black screen is still there. How can I automatically have the black screen disappear.

  I wrote a batch file in Notepad using win XP, it works, but when you are finished, the black screen is still there.    How can I automatically have the black screen disappear.

  Hello

  Use it as the last command in the file beats.

  OUTPUT

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Printer installed, but cannot be set as the default printer

  Original title: printer installation

  printer installed, but cannot be set as the default printer

  Hello

  See if that helps you.

  "Set or change your default printer"

  http://Windows.Microsoft.com/en-us/Windows-8/set-change-your-default-printer

  See you soon.

• blocks of Lightroom after the use of crops funktion. Export still works, but after you have selected the following image, lightroom must be inexplicable manually (no response from the program). environment: windows 7 adobe cc 2015

  blocks of ightroom after the use of crops funktion. Export still works, but after you have selected the following image, lightroom must be inexplicable manually (no response from the program). environment: windows 7 adobe cc 2015

  Turning off graphics acceleration. Go to preferences-> Performance tab and uncheck the box there.

• can replace the cartridge of hp564 to 178 hp C410 series photosmart premium fax e-ALL-IN-ONE?

  Can replace the cartridge of hp564 to 178 hp C410 series photosmart premium fax e-ALL-IN-ONE?

  564 ink cartridges are intended for America, 178 ink cartridges are intended for different regions.

  If you have moved to the Middle ease, African countries or CIS get a full set of 178 ink cartridges, then contact HP sopport to reset the printer to accept local ink cartridges.

  You can find contact information by selecting your region and following technical support after purchase below:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Shlomi

• ePrint still listed as offline on laptop when you try to print work but printer D110a

  I literally tried everything to resolve the question in the title. I'm fine with the networking. I'll run down the list of things that I tried to solve this problem, or the important factors that someone would need to know to help me:

  • It's my work, laptop which I use at home
  • I am running 64-bit Windows 7 Professional
  • All my wireless devices have Internet access
  • I can print on my printer D110a, but only via the ePrint option, which takes more time, because the packets must be sent via the Internet
  • I removed the D110a of devices and printers; HP ePrint is still listed as a separate device
  • The laptop has a 10/100/1000 Ethernet port
  • My router is a router dual-band running at 2.4 GHz and 5 GHz frequencies
  • I connect using the 2.4 GHz frequency
  • The laptop has a built-in wireless card which can achieve up to 72Mbps access
  • I have a Wireless N adapter, which can connect to my 5 GHz band and up to a connection 300Mbps; I removed the adapter and ensured that I am connected to my 2.4 GHz band
  • Other printer drivers HP for printers that I use at work are installed on my laptop
  • I tried to uninstall and reinstall both complete drivers and base for my D110a, but during the installation, the wizard can find never the printer despite the fact that he obtains the valid IP address (192.168.1.x) private on my 255.255.255.0 network
  • I hid my 2.4 GHz and 5 GHz SSID, the D110a attached to the old, but my 2.4 GHz SSID is hidden is no longer and the D110a shows it is connected with a valid, private IP address that is not in use
  • The printer IP address statically has been highlighted, but I since changed to DHCP
  • I had the MAC address of the filtering enabled for network devices, but I've disabled since
  • I tried to remove the power of the modem, router and printer at the same time, wait a minute or two and then restore power to the modem, router and printer in turn before confirming that, once again, my wireless printer can connect to my network and rent a valid, private IP address that was not in use by another device on my network

  I read that the HP CUE DeviceDiscovery Service could confuse a laptop that is used between a job and a home network, if other HP printers are available on the work network unless the service is disabled when switching between networks. However, given that I'm trying to add the printer D110a from home, I imagine that this service must be enabled and started. He is currently in a State of the road with a manual startup type.

  Oddly, although I can access the Internet from the 2.4 GHz or the 5 GHz band, I can't ping my gateway (192.168.1.1) when I'm logged in without wire, or I can ping some other devices on my network, although I see they are connected in the UI of my wireless router/gateway. The router is connected to a modem, but the router is configured as a DHCP server and assigns IP addresses to devices that are trying to connect to my home network. I think that my modem is on a different subnet, with an internal IP address of 192.168.0.1 not 192.168.1.1, which is the IP address of my router/gateway. Curiously, I ping my router and other devices on my network so I am connected directly to the router via the Ethernet port. I went into the Windows Firewall with advanced security, and I see that echo for IPv4 queries are allowed for any type of interface (wired or wireless), but this only applies to a domain (that is, knitting) network, only. Perhaps a rule should be created to allow applications to echo on a private network (i.e., mine), as well.

  Maybe I should not worry about this, because the solution is just to print on the listed HP ePrint peripheral, but it is ridiculous that I can't print to the D110a locally. Any help to fix this would be greatly appreciated.

  Respectfully,.

  Eric Sternot

  Solved! I already knew how to reset the router, as I did several times, but thank you for your diligence.

  Anyway, after my router wireless network configuration backup, restore and then return to re - enter the data, I noticed a field called 'enable wireless of isolation '. The description on the information page of the router down the right to say read, "If checked, the under this SSID wireless client can only access the internet and it can not access other even wireless clients under the same SSID, Ethernet customers or this device. Other customers can access the wireless client, either. "No wonder I couldn't ping other devices on my network, while my laptop was using wireless, too! I restored the original configuration of my router from the backup file I had created and then connected, box unchecked "enable wireless isolate" and saved my configuration. I could then all connected devices - wired or wireless - ping on my network, including my printer D110a. I could also print on it locally.

  Thanks for your patience to help me solve this problem. I know it sounds dumb, since workaround has been just to print the D110a on the Internet by using the device or the ePrint service, but at least I learned a little more about the configuration of firewall ports and what "isolation wireless" was.

• PSC 1350 printer works but not scanner

  Hello

  Have just upgraded to Windows 7.  I have the printer psc 1350 to work & print documents.  I can not get the computer recognized or even to recognize the scanner function.  I have the installation discs and who have tried but still no scanner function.

  Site Web of HP said that the Windows 7 software should recognize the psc1350.  It recognizes the printer function but NOT the scanner function.

  Any ideas?

  Hello

  Open the program to Scan and Fax from Windows, and then follow the steps set out below, the steps for Windows 7 are identical:

  http://support.HP.com/us-en/document/c03511920

  Kind regards

  Shlomi

• HP Deskjet 3054: Printer works but not the Scanner (device not found)

  Configuration: Windows 8 Lap Top with a HP Deskjet 3054 directly connected via USB

  Printer - it works

  Scanner - when you run the Application "Hp Scan and capture ' it comes back and says"device not found ".

  I tried - I ran 'HP print and scan doctor '.   Everything is OK except the "HP Scan".  He said that it was not able to find the HP Scan software on my computer.   When I went on HP customer support site to download it, I couldn't find it.  There is nothing that I could see which says "HP scanning software".   So this software HP Deskjet full functionality and drivers what I should download and install?

  BTW, the "HP Scan and Capture" application allows to work perfectly.  Not sure why it isn't now.

  Hello

  When changed the type of network to a USB connection? scanning HP and Capture app support network scanners, it does support a USB connected device:

  http://support.HP.com/us-en/document/c03478505

  In the HP Deskjet 3050 software select scan a Document or Photo and check if this can work...

  If the same persists, unplug the USB, uninstall the HP Deskjet 3050 basic software drivers from programs and features, then download and reinstall the most comprehensive software features again.

  If you prefer to continue to use the HP Scan application capture &, open the HP Deskjet 3050 software, click the utilities tab, click the printer installation software & and select Convert USB wireless to connect the printer to your network. then the Scan & Capture app should detect the scanner.

  Shlomi

• Trying to activate Photoshop CS 2. Worked before but I had to replace the computer. Now activation says "server not available".

  I try to activate Photoshop CS 2. Have had the product works on old office for a while, but had to replace the hard drive. No, try to activate, I get message "activation server is unavailable at this time." My CS2 has been updated from PS 7. I have all the disks, etc.. Tom

  Hi thomas,

  You cannot save Adobe CS2 products as the CS2 products activation server is no longer available. To use a CS2 application, you must uninstall your existing application of CS2.

  Once done, please download and install the CS2 products from the link below. You cannot reinstall from your original disks.

  Please find the link for more information about the Activation of the server unavailable for CS2 products below...

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Please follow the link below to download the CS2 products. You will also find the serial number as well as the configuration file.

  Download Acrobat 7 and CS2 products

  Please let us know for any further assistance.

  ~ UL

• Troubleshooting hp printer all in one series. full cartridge and the printer works but no ink on the page

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Try to re - align the cartridge:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=buu00657&tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=441115

  Reset the print queue as you 'jobs' stacked:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02205477&LC=en&DLC=en&cc=us&product=441115