ePrint still listed as offline on laptop when you try to print work but printer D110a

I literally tried everything to resolve the question in the title. I'm fine with the networking. I'll run down the list of things that I tried to solve this problem, or the important factors that someone would need to know to help me:

  • It's my work, laptop which I use at home
  • I am running 64-bit Windows 7 Professional
  • All my wireless devices have Internet access
  • I can print on my printer D110a, but only via the ePrint option, which takes more time, because the packets must be sent via the Internet
  • I removed the D110a of devices and printers; HP ePrint is still listed as a separate device
  • The laptop has a 10/100/1000 Ethernet port
  • My router is a router dual-band running at 2.4 GHz and 5 GHz frequencies
  • I connect using the 2.4 GHz frequency
  • The laptop has a built-in wireless card which can achieve up to 72Mbps access
  • I have a Wireless N adapter, which can connect to my 5 GHz band and up to a connection 300Mbps; I removed the adapter and ensured that I am connected to my 2.4 GHz band
  • Other printer drivers HP for printers that I use at work are installed on my laptop
  • I tried to uninstall and reinstall both complete drivers and base for my D110a, but during the installation, the wizard can find never the printer despite the fact that he obtains the valid IP address (192.168.1.x) private on my 255.255.255.0 network
  • I hid my 2.4 GHz and 5 GHz SSID, the D110a attached to the old, but my 2.4 GHz SSID is hidden is no longer and the D110a shows it is connected with a valid, private IP address that is not in use
  • The printer IP address statically has been highlighted, but I since changed to DHCP
  • I had the MAC address of the filtering enabled for network devices, but I've disabled since
  • I tried to remove the power of the modem, router and printer at the same time, wait a minute or two and then restore power to the modem, router and printer in turn before confirming that, once again, my wireless printer can connect to my network and rent a valid, private IP address that was not in use by another device on my network

I read that the HP CUE DeviceDiscovery Service could confuse a laptop that is used between a job and a home network, if other HP printers are available on the work network unless the service is disabled when switching between networks. However, given that I'm trying to add the printer D110a from home, I imagine that this service must be enabled and started. He is currently in a State of the road with a manual startup type.

Oddly, although I can access the Internet from the 2.4 GHz or the 5 GHz band, I can't ping my gateway (192.168.1.1) when I'm logged in without wire, or I can ping some other devices on my network, although I see they are connected in the UI of my wireless router/gateway. The router is connected to a modem, but the router is configured as a DHCP server and assigns IP addresses to devices that are trying to connect to my home network. I think that my modem is on a different subnet, with an internal IP address of 192.168.0.1 not 192.168.1.1, which is the IP address of my router/gateway. Curiously, I ping my router and other devices on my network so I am connected directly to the router via the Ethernet port. I went into the Windows Firewall with advanced security, and I see that echo for IPv4 queries are allowed for any type of interface (wired or wireless), but this only applies to a domain (that is, knitting) network, only. Perhaps a rule should be created to allow applications to echo on a private network (i.e., mine), as well.

Maybe I should not worry about this, because the solution is just to print on the listed HP ePrint peripheral, but it is ridiculous that I can't print to the D110a locally. Any help to fix this would be greatly appreciated.

Respectfully,.

Eric Sternot

Solved! I already knew how to reset the router, as I did several times, but thank you for your diligence.

Anyway, after my router wireless network configuration backup, restore and then return to re - enter the data, I noticed a field called 'enable wireless of isolation '. The description on the information page of the router down the right to say read, "If checked, the under this SSID wireless client can only access the internet and it can not access other even wireless clients under the same SSID, Ethernet customers or this device. Other customers can access the wireless client, either. "No wonder I couldn't ping other devices on my network, while my laptop was using wireless, too! I restored the original configuration of my router from the backup file I had created and then connected, box unchecked "enable wireless isolate" and saved my configuration. I could then all connected devices - wired or wireless - ping on my network, including my printer D110a. I could also print on it locally.

Thanks for your patience to help me solve this problem. I know it sounds dumb, since workaround has been just to print the D110a on the Internet by using the device or the ePrint service, but at least I learned a little more about the configuration of firewall ports and what "isolation wireless" was.

Tags: HP Printers

Similar Questions

  • Printer Offline Message When you try to print the Office Word doc

    Message from the printer offline.  HP shows printer status is online with wireless network and computer ASUS says is in line with wireless network and internet but when I try to print a word doc it does not print.  I get a message that the printer is offline.

    Hi Robin,

    Are you facing this printer offline error when you try to print from Microsoft Word?

    Error "the printer is offline" message on the computer and the printer does not print. Offline indicates that the computer has lost a direct communication with the printer.

    I suggest you try the steps from the following link and see if that helps.

    "The printer is offline" Message appears on the computer and the printer will not print: Windows 8
    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c04249080

    I hope this helps. Let us know if you have other problems with Windows in the future.

  • Seeking help with a problem with the LR I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message, "could not create a JPEG sponsor limit you 92 k Bytes.Plea.

    Seeking help with a problem with the LR


    I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message.

    "Could not create a respondent JPEG limit you 92 k Bytes.Please increase the size limit files
    . (1).

    .....

    I tried to increase the size of the file several times,

    I left LR

    I restarted the computer.


    Any help or advice for this problem will be greatly appreciated


    Thanks in advance


    @stu

    Not because of the number of pixels, in this photo and the chosen level of quality there is no possible way to create a JPG file to the size of file you requested. You must change your export settings.

    Show us a copy of the export dialog box, so we can see clearly the part file setting and the size of the Image.

    Also indicate the number of this image (width and height) pixels after cropping (as appropriate) and prior to export.

  • Two devices Fax listed when you try to print from Internet Explorer metro

    Hello.  Our Pro Officeject 8600 is ranked twice as "Fax - HP Officejet Pro 8600" when access to the 'Peripheral' charm in Windows 8 Pro 64 bit and try to print from Internet Explorer of Metro.

    One of the two brings in fact appear Fax options, while the other will be printed as usual, but you must use some trial and error when you try to print.

    It is specific to IE connecting the metro interface as the desktop IE printer appears as normal.

    I want my printer to appear as a printer and not a fax, so that I don't have to guess...

    Any help would be appreciated.

    Thank you.

    This isn't a problem from the point of view that the software works in fashion, it is supposed to. When you install your printer it installs two drivers, one for fax and one for the printer, because they are two totally different functions. If you find it difficult to distinguish between them, I would recommend renaming as I mentioned above.

    Uninstall and reinstall the printer will not change this fact.

    I would like to know if this is the information that you need to hear!

    Have a wonderful day!

  • Adobe Reader crashes when you try to print to the printer? Why? Any ideas would be great on how to solve this problem for my clients...

    Adobe Reader crashes when you try to print to the printer?  Why?  Any ideas would be great on how to solve this problem for my clients... This seems to be a problem once the latest version of windows update 03/08.  I don't know if it's a real problem Adobe, IE question, question of operating system or printer/printer driver problem.

    Someone please help!  Thank you

    In fact, I have not... However, I have to go change the preferences of Adobe and to take do not open in the Internet Explorer browser and that seems to have solved the problem for now.  However I am still confused about whether it is a matter of IE8 or Adobe 9 and X... Because it's not all my clients with that number only some of them...

  • Blue screen error when you try to print Adobe PDF files

    Original title: the computer crashes when I try to print Adobe PDF files.

    I unintalled and reinstalled remains 9.3.3 and it still won't print. The OS crashes when you try to print a .pdf file. I can open the document and view the file but not print, just the blue screen and restarts. I opened a word document, print and print text files. It will print anything but Adobe files. Is there any help out there?

    HonoriusIII

    Thank you for your support and help Sicard. I finally got to the last version of Adobe as the culprit. It seems that the latest version 9.3.3 was causing problems. I uninstalled the software, cleaned the registry and other remains and installed the various editions of Adobe. Seems that Vista likes only one software version which proved Adobe 8.0. Once I installed the software, found a few .pdf documents and tried to print. Not only did it print well, it was very fast. Of all the places to find the 8.0 Adobe has been installed on my recovery disks. I don't think Microsoft product (s) are the root cause. Something in Adobe was the cause of the crash. I have the error message has not write against accidents, but it dumped memory and restart is fine, no conflict of driver. Only thing I did after each accident was to defragment. the hard drive and RAM by using certain tools. Vista ran fine since. I know a lot of people out there do not like Vista, but I did have a lot of problems with the software. I found problems with other types of competing software and work with software developers using their products in beta. The crash of the problems were not these beta products. I believe in keeping software simple and effective, it seems that Adobe will conversely making it too complicated software and an application's entire concept.

    Thanks for you help,

    HonoriusIII

  • HP 6500 a: hp 6500 has only get blank pages when you try to print from computer

    My 6500 will print word documents works and makes copies of fine

    whenever I try to print from the computer - email or web pages, I get blank pages

    the printer is set up via usb, no wireless

    its not offline - no error messages - don't just blank pages

    It was OK yesterday

    Thank you

    Hello @katt6,

    Welcome to the forums

    I understand that you can print documents with success and however, make copies when you try to print a Web site or an e-mail, the pages come out blank.

    Personally, I think that there could be a problem with the browser you are using and would recommend that you try to print from another browser. Firefox or Chrome should work. Please try one of them and let me know what happens!

    Download Firefox here: Firefox Free Download

    Download Google Chrome here: Download Google Chrome

    Good luck

    If you like my answer to your concern today, click on the thumb upward below!

  • When you try to print a document, the fax MACHINE pop up screen

    Hello

    When you try to print a document, the FAX screen pop up, so I can't print.

    I don't know ho to avoid that from happening.

    Please advice.

    AVI

    > Where these two printers are defined?

    Printers/FAX page.

    > I'm in Chrome and I right click, print, then it brings me the FAX screen pop up

    In chrome, I see a page that lists the printer (which is listed for you?) and a button saying 'change '.

    Also, if you use ctrl-shift-P, it gives the system dialog.

  • When you try to print, get a page that contains the message PCL XL Error, error: InternalError 0 x 50

    Original title: printer Hates Me

    Whenever I try to print anything 1 page out of my printer. It is said.

    PCL XL Error

    Subsystem: TEXT

    Error: InternalError 0 x 50

    File name: cheettext.c

    Line number: 710

    I'm losing my mind!

    PLEASE HELP SOMEONE

    Thank you, Carol

    Hi Carol,.

    Welcome to the Microsoft community!

    When you try to print, you get the message as PCL XL Error, error InternalError 0 x 50.

    PCL XL errors occur when you use the PCL6 drivers.

    1. What is brand and model printer?

    2 - is the printer test page print correctly?

    To fix the problem, you can try to uninstall and reinstall the printer drivers.

    Also, you can turn off the printer for 30 seconds and turn it back on and see if the problem still occurs.

    I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

  • persistent "not specified" errors java script when you try to print from Web sites...

    Windows 7 64 - bit OS, HP Photosmart C4780 printer, HP Pavilion dv6 Laptop.Recently meet persistent "not specified" errors java script when you try to print from Web sites, please help.

    Try cleaning your cache. Here's a link below that will help you with this problem.
    http://goo.GL/wE6gL

  • When you try to print to get address of 0x9ab41f function message caused a protection fault. (code 0xc0000005 exception)

    Original title: address of the 0x9ab41f function caused a protection fault.

    When I try to select preferences for my Canon MG6150 when you print a word document, the screen freezes after posting a panel with:

    Address of the 0x9ab41f function caused a protection fault. (code 0xc0000005 exception). The application property sheet pages may not work properly.

    I have to reboot to unlock the computer.

    Tried reloading the software canon and windows 7, but still no joy have the same failure anyone can help me fix this please?

    Hello

     

    Welcome to the Microsoft community!

    When you try to print a word document, you get the message as the address of the function 0x9ab41f caused a protection fault. (code 0xc0000005 exception). The application property sheet pages may not work properly.

    To help you better, we need more information.

    Is the issue limited to word document or it occurs with other documents as well?

    To work with the question, I would say that you are running the printer troubleshooter.

    Visit the site:

    Open the printer Troubleshooter

    http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter

    You can also consult the site:

    Why can I not print?

    http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

    I hope this helps. If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

  • I had the creative cloud now for 4 months, but it says I don't have a subscription when you try to use PS, but I connect to Adobe and I do?

    I had the creative cloud now for 4 months, but it says I don't have a subscription when you try to use PS, but I connect to Adobe and I do?

    I have download it again and he takes me to a page where it wants a serial number, I'm something wrong or missing something?

    Your subscription to cloud shows correctly on your account page?

    If you have more than one email, you will be sure that you use the right Adobe ID?

    https://www.adobe.com/account.html for subscriptions on your page from Adobe

    .

    If Yes

    Some general information for a subscription of cloud

    Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

    Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

    -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

    .

    If no

    This is an open forum, Adobe support... you need Adobe personnel to help

    Adobe contact information - http://helpx.adobe.com/contact.html

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    -Select your product and what you need help with

    -Click on the blue box "still need help? Contact us. "

  • Firefox will not print on my HP PSC 750 printer and loses all formatting when you try to print to the printer Brother HL-5240

    I have no problem with one of my printers when printing 11.7 before or IE 6.0.2800.1106 but cannot print from Firefox 3.6.13 (or earlier).
    When you try to print to the HP PSC 750 inkjet printer, a "Print" dialog box appears, showing the title: xyz and a progress meter showing 100%, but it's be covered almost immediately by a second dialog box stating "an unknown error has occurred while printing" and, even if the continuous printer saying 'impression', no printing is taking place.

    When you try to print to the Brother HL-5240 laser printer, printing will take place, but all formatting is lost and what comes out is a block of text unintelligible running.

    What can / should I do to get Firefox to print correctly on my two printers?

    1. print.print_printer reappears after printing something. This pref is the last printer used, so when you reset the prefs it does not appear until you print something.

    2. that your problem with printer HP reappeared quickly, try a new profile.

    http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

    3. with regard to the preferences for the old printers, if reset you these Pref they don't come back (assuming that you do not select accidentally printers or printer drivers are uninstalled).

  • When you try to print the document his service hence giving error does not

    I am using windows xp pro sp2

    When you try to print the document his service hence giving error does not

    then I start the services.msc print spooler service, but this only works for printing after that it gave the same error

    Please help me

    Hi kalpesh_vaghela,

    1. Did you the latest changes on the computer?
    2. What is the full error message that you receive?
    3. What is the number and model of the printer?
    4. You use any program to print the document?
    5. Are you experiencing a similar problem with any program that allows you to print?
    6. You have security software installed on the computer?

    Method 1

    See the link below and try the fixit tool available, check if it helps.

    Problems printing and printing errors

    http://support.Microsoft.com/mats/printing_problems/

     

    Method 2

    If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. Click Start , and then click run.
    2. Type msconfig , and then click OK.
      The System Configuration utility dialog box appears.
    3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.

    When you are prompted, click restart to restart the computer.

  • Constant "paper jam" when you try to print photos

    Hi all

    I get constant "paper jam" error when you try to print photos on HP Premium Plus photo papers. I use 13 x 18 cm and A4 documents. I gave up a single sheet of A4 paper and printed the printer self-test report and it shuts everything OK.

    I already followed the instructions of rolls to power clean paper, but without effect (for example http://support.hp.com/us-en/document/c01123477

    I'm about to give up and look for service but the strange thing is that jams only when I try to print photos (for example from Lightroom) but is allowed when copies of documents or printing self-test report.

    Any advice here?

    Thank you

    Adam

    Hi MissTeriLynn,

    Troubleshooting instructions made me pick up the problem with Lightroom. I came across a statement "some other Adobe software users have reported conflicts with HP printers. They tend to have long names and a simple change of name of the printer, for example to something like desktop printer or MYPRINTER seems to work"(here).

    And guess what. It resolved my problem as well. I have configure most of the options of printed model but the printing again.

    Thank you very much for the support provided!

    See you soon,.

    Adam

Maybe you are looking for