Scan printer Device4500

Similar Questions

• 1510: new scan printer stop working

  Even after my scan printer stop working. I have scan doctor and it does not find the connected scan

  What can I do, whenever I want to use it, it never works

  Welcome to the community of HP @pete121222,

  I understand that you have lost the connection to the scanner to your HP Deskjet 1510. I'll be happy to help you.

  Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.

  HP printers - WIRELESS card Scanner is lost (Windows)

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• 8500 A909G - Feeder causes black streaks on faxes/scans/print jobs... ONLY when you use the charger

  Charger cause black streaks on faxes/scans/print jobs... ONLY when using the charger... If I put something on the glass and printing fax/scan/or it... everything's fine... it was ONLY when I use the charger... did someone come up with a solution to this problem?  Looking at the other reports, it was NOT those that have been fixed... I hope that someone can help me solve this problem, as it was NOT a printer not expensive to buy...

  I'm sorry you have a problem with the vertical lines in the ADF.

  Try to clean with water and lint rollers. There is also a glass of small strip (rectangular) when you lift the lid. Also clean.

  Here is a link that can help you too.

  http://support.HP.com/us-en/document/c01618140

  Let me know if it helps.

• MS Fax and Scan Print grey Driver after installing printer Brother

  I have been using the MS Fax print driver to send faxes. I recently installed a brother all-in-one printer/scanner/fax, and now when I select MS Fax in the selection window printer, all selections are grayed out and I get a message that I have to select a printer. It seems that the printer driver is missing or the registry does not point to it. Any suggestions out there?

  Original title: MS Fax and Scan Print Driver missing

  Thanks for responding. I found the solution to my problem. Congratulations to "XP rocks" on the forum:

  Go to 'control panel', 'programs and features' and in the left pane, click on "Turn on or off windows features". Leave the box to fill out, scroll down and expand, 'Print and Document Services'. Uncheck the box next to Windows Fax and Scan , then click on 'OK'.

  This action allows you to uninstall the current installation of corrupt Windows Fax and Scan. If you are prompted to reboot, do so.

  Re-install Windows Fax and Scan, by following the instructions and checking the box.

• C410: C410 the bed not scanning/printing

  Hi all

  I have a new C410 market with HP Easy Scan installed.

  I am NOT able to print - or scan - bed. All works well with the document Feeder and the Document

  Contactor, feeder, powered by small suspension arm, detects the paper loaded correctly and I used this function.

  I want to be able to print or scan using the bed. as well as the document feeder.

  It's prompting me to feed the Document Feeder & I want to go 'old school' from time to time.

  There are some default setting that controls this? My search did not produce results.

  Thanks for the help.

  David

  Hi David,

  HP Easy Scan settings refer only to the analysis, which means that only for sources of inputs to scan an original and not to any related print job.

  For scanning you can use glass flat or Automtic document feeder.

  Select ADF allways employeront high page document feeder, invites you for a mistake when there is no page loaded.

  Choose the glass flat allways use the scanner glass, without worrying if a page has been loaded in the ADF top or not.

  By selecting Auto scan only the ADF will be once the original has been charged to the feeder albums (of which ten displays a prompt 'Original charge' on the printer screen), or will use glass once there are no documents loaded in the feeder at the top of the page.

  I thought that IF the CSA was not activated by the CSA "detection switch" then the scanner would default to the dumpster analysis function. It seems that my "thinking" in this respect was not accurate - Yes?

  The information above is correct, once the Source is set as automatic, for any other Source selection that does not apply the sensor.

  It does not refer to any paper or tray when printing, those are parameters to make a print dialog box.

  Hope I was clear with your intention, if not please let me know.

  Shlomi

• Issue of scanning/Printing Office Pro 8600 N911g ADF

  The printer works perfectlyt except when scanning or printing through the ADF. When the charger is used to scan or print material shows a thin, but documents line strong, black from top to the bottom of the printed output (or scanned in).

  This line does not appear if the document is feed into the ADF and is about 1 1/4 "from the right side of the front of the scanned doc and the same distance on the back, but on the left side. If scanned into the computer and saved the doc file scan seems to have the line in the file. I thought it might be a problem of ink cartridge, but if the analysis file has a line on it of course is not a cartridge problem. The original doc of feeding through the ADF remains prestine. Interestingly, when the line appears on the printed doc or scan does not appear to align with a roller or the device of the feeder with the module duplex or ADF.

  Have completed all the steps described on the HP support site in the cleaning of the rollers, etc. on both the two the duplexer and the ADF without success. The problem occurs only when a document is fed through the ADF, so am reasonably sure that the problem is internal to this part of the unit or it could be a software driver problem.

  Am a relative novice here so any help, suggestions or advice would be really appreciated.

  Hello

  Please follow the steps mentioned in the video.

• OfficeJet HO 5740: analysis via "Scan" printer ikon does not find the computer

  When I try to scan to a file using the ikon of screen touch printers and after selecting the computer I want to test results from the screen "Select computer", "access to the computer" in the following error message:

  "The selected computer is not available. Make sure that:

  > Computer is on. [it is]

  > The computer and the printer are connected with a USB cable properly [they are].

  > The recommended HP Print software is installed and configured on the computer [I used the installation disk that came with the printer].

  Search the computer for more information".

  I get this error message select regardless of format (PDF, JPEG, Email, etc.)

  The other functions of the touch screen seems to work normally.

  With the help of HP Printer Wizard installed on the PC to ask the printer to scan works without problem, but I find much easier if I could use the printer display.

  Thanks for your reply. Although your proposed solution has not worked as expected with my model - Officejet 5740. The option "Manage the Scan to Computer" is still not available in the HP printer Assistant. However, I thought I'd give the on-screen touch printer another chance: and it works now. So, thanks for the advice.

• photosmart HP 6510 not scan printer iPad 3

  The printer message is 'none found computer. ' IPad 3 and HP 6510 times connected to the wireless network and the iphone4 and iPad 3' print wireless. Printer request "scan to computer" is activated. Bought from the Apple Web site! Y at - it an app that will allow wireless scanning?

  Hello

  Scan from the front panel for an iPad is not supported.

  You can scan using the HP ePrint home & Biz app, available on the app store of Apple:

  http://support.HP.com/us-en/document/c02486319

  Kind regards

  Shlomi

• Updated to Snow Leopard, can not scan printer, by computer.

  When I had Mac OS Leopard (10.5.8), I had no problem to scan from my HP 310a wireless all-in-one printer, I just press scan on my printer and it's done.  Since I've upgraded to Snow Leopard (10.6.7), I can do it no longer.  I get a message on my printer saying should I scan my computer, which means that I have to click on the shortcut of scanning HP in my iMac that came with the HP software.  How can I change it so I can scan my printer again?

  You probably can't.  This feature does not work most of the time with Snow Leopard, sorry.

• HP Officejet 4620: Can scan, print test pages, but not documents

  Printer stopped last night.  Have you tried to reconfigure the printer, router & mobile.  I can scan and trigger test print from laptop so I assume that the connection is good, but it will not print the 3rd part of Word, Photoshop, etc.. The levels of ink and paper are all well. Any suggestions?

  Yes, it worked - if she always says the driver Version: 2.0 so I don't really understand what happened to the problem on three different computers at the same time or how the fix has fixed - but it works, thank you!

• Works of scan, print says it works but does not work

  Hi all! Everyone seems to have the opposite problem - wireless printing, but the scan is not. Not me! I choose "scan" of my printer OR computer interface and it starts right up. Problem is, when I go to print it crosses the 'impression' screen, then said "finished printing" (no crash, error, or something in the queue to delete - it's in the queue, then it disappears as if printed), but no results of the company at the end of the printer!

  Before ask you, yes the printer works (print from a card SD inserted directly on the printer, or old computers connected via a network). Yes, I turned everything and turn it back on. Yes I tried to download printing HP & scan doctor, and he said all right, see ink levels etc, but its test page like any other print job. Yes I deleted the whole HP and re downloaded and searched/connected my computer via the wireless network. And, as previously mentioned, it scans. Oh and tells me that my ink level! Clearly, there is communication, but not for that. What weird sous-parametre I'm missing?

  And also, if you can solve this problem, can you give me an idea if it's going to suddenly begins to print 80 pages or I tried to beam on, so I can stop it? : )

  Thank you muchly!

  Hi @theshrew

  Please try bypassing the spooler to see if you can print directly to the printer.

  1. click on start and go to devices and printers.
  2. right click on the printer and click on printer properties.
  3. choose the option "print directly to the printer.
  4. click on apply and then OK.

  If it works, follow the following steps and try printing again.

  Hold down the Windows Logo key () on the keyboard and the 'R' to open the Run dialog box

  • Type services.msc and press enter
  • Locate the print spooler and double-click it to open the spooler properties
  • Make sure you that Startup type is set to automatic, if not please click the menu down and select automatic
  • Under Service status, please stop the server, wait a moment, and then click Start

  If bypassing the spooler does not have a feel successful, let me know.

  Also, what model of printer do you have?  How can I find my model number or product number?

  You get an error message, or print a blank page? More detail I have better

• HP Deskjet 3050 (J610a) won't scan - printer not found

  This fine all worked until I had to get a new router and I can scan after you have reinstalled the HP 3050 wireless printer is no longer on my computer. It is worth noting that on my other computer, there has been properly installed on Vista and I can scan and print normally.

  When I click on the scanning software HP on the desktop or in the program menu it shows an error window saying "HP Deskjet 3050 J610 series is not found"

  I ran the HP scan diagnostic software and he said just that no scanner are installed. But I installed the software from the CD, I did the first time I got the printer and I did something different this time when I changed the router then why didn't he scan?

  Can anyone help?

  All sorted.

  The problem was that I had installed the drivers of BASE and not the FULL software.

  Silly me!

  But it could help other users in the future. Uninstall, and then download and install the FULL software and everything should work fine.

• HP Deskjet 3050 wireless but don't scan prints

  DeskJet 3050 will be printed laptop Asus but not scan. Previosly worked well. Still works fine for printing and scanning from Acer and Apple laptop to laptop. Running HP print and Scan doctor but still does not.

  Hello bigbird1961and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have problems with scanning.  I would like to help!

  I would say uninstalling the software of the printer.

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• The printer control page does not appear, page with scanning, printing and other options need

  Original title: Page printer control

  When I opened my window printer the normal screen to control the printer does not appear.  How can I get this to come form? I need to the page with the scan options, printing and others.

  Hello

  1. are you referring to the preview before print screen or is it a screen of the printer software?

  2. what program you are trying to print from?

  3. This occurs when you use another user account?

  Method 1:

  You can check if you are facing the same question in the user account new or different administrator account.  You can create a new user account on your computer, and then check.

  Create a new user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If you are not faced with the same question in a new user account, you can check the link below and use the steps provided to screw a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 2

  You can check the question in the clean boot state. Check out the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

• Scanning/printing with envy 4500 problem

  We had our combo printer for about 6 months... we had a problem with the printing of our laptop computer after you install the software. When you try to print, the dialog box shows the printer is offline, but it's not. We also have the software installed on our desktop. My question is, we are limited to a single computer for this printer and not both? If so, this is not cool. I have run diagnostics and just, it will not help. I uninstalled the software from the laptop and reinstalled. It worked today, but now I can not scan from my office. What is the problem?

  Jack

  Hi @radiowizard,

  Welcome to the HP Forums!

  I see that your HP Envy 4500 printer is indicating that it is in offline mode. According to another post, you run that Windows 7 is that correct? I'm happy to help you with this problem of connection!

  This printer has USB connection or wireless connectivity options. If you wireless you can print with several computers, if computer USB and then one at a time.

  Please consult this guide, "Printer is off-line" Message appears on the computer and the printer does not print: Windows 7.

  Hope this guide clears things up for you and have a wonderful day!