Back in HTML output via cart XML XSLT

Similar Questions

• Sound is more output via HDMI

  Hello

  I have a desktop HP m9300t with Vista 64 Bit SP2. It has a video card Nvidia GeForce 9300 256 MB with a HDMI output (and DVI).

  I've always been able to play the video and sound through an HDMI cable connected to my TV. A few weeks ago, I ran a few updates and uninstall several programs I do not use or need. I installed the Vista SP2 and updated my nvidia driver for the last available on the nvidia website. Now, I can only video output via HDMI, but no sound.

  I have the Realtek HDMI output defined as the default device under sound-> read (and it shows like 'work'). When I test it, I can see the volume up and down bar, but there is no sound on my TV. I also tried many different programs (WMP, Winamp, Media Player classic, Firefox, but still no sound.)

  Sound works fine in my computer speakers when I put as device by default.

  I tried two different HDMI cables, which I know work because they took out his other devices.

  I've updated my audio driver for the last available.

  I installed an older video driver without success.

  I scoured the internet for hours, but nothing I can find solves my problem.

  Hello

  Check the device settings in device that receives the stream of video and audio HDMI.

  What camera brand and model has no sound via HDMI?

  What is plugged into the SPDIF Jack on the back of your PC, no matter what?

  Go to www.realtek.com and download and install the latest audio driver.

  Go to www.nvidia.com and download and install the latest video driver.

  You could also try to uncheck HDMI and check digtial output and see if that produces sounds.

  These "how-to" HP articles can also provide assistance.

  Even the latest drivers and updates may cause the problem.  I have run into a problem of sound with Realtek and had to fall back to the original audio driver supplied with the PC to get his job.  Five months later, Realtek audio driver problem fixed.  You need to maybe do this or maybe go back to the last good Windows restore point known. Of course if it does not then you would have to depend on your image less hard drive backup.

  It is also possible that your HDMI audio circuits are bad.

• Questions of EXCEL output in the XML editor logo

  Hello
  
  We use the Publisher XML API to generate PDFS, EXCEL returns by using the template. When adding image for the model of its display in the output pdf file. But not in Excel output projection. Then I added url: {/ Image} in the text of the image in the template and submitted the report again now able to see the image output to excel. Can you please tell me why his does not display not not the picture in excel by default which is the line that goes in the case of PDF. IAM getting the same question for HTML output generation also. Please tell me what I can do to get the image by default identical to the way I'm in PDF format.
  
  Thank you
  Satya

  for the xml editor:
  How to determine the Version of the Publisher Oracle XML to Oracle E-Business Suite 11i and Release 12 [362496.1 ID]

  >
  To resolve this problem, we need to make manual configuration image as menioned in the document 736897.1?
  >
  It is based on your report and your needs

  It's may be:
  -OA_MEDIA and url as the url: {' ${OA_MEDIA} / your_image'}
  -URLs as interface http as url: {'http://www.servernews.ru/assets/images/articles/594131/OracleLogo.jpg'}
  -logo by submodel

  then you can try the logo by OA_MEDIA

• HP pavilion p6630f supports output via connector dvi - d to dvi - d to hdmi audio adapter?

  HP pavilion p6630f supports output via connector dvi - d to dvi - d to hdmi audio adapter?

  Hello

  The DVI does not support audio.  You must use a separate with the DVI cable audio cable. There are DVI cables that do not have an extra audio cable in the same sheath, but they are usually not sold in most retail stores.

  There are rumors on the net that ATI could have a special cable where some unused DVI pins were used to route the audio but that could also mean using an ATI video card. It would be a very strange configuration and not one I would recommend.

• Channels disappear in WMC at the output via HDMI

  I have a tuner TV USB (connected to an internal antenna) on my Windows 7 laptop. When I use just the laptop, I can watch TV without any problems. However, when I connect the laptop to a monitor via a HDMI cable, all channels disappear and running a scan does not find an any of them. Help the PC on the screen works fine - just Windows Media Center is not.

  The laptop is a Dell Inspiron M301Z and the TV tuner is a DVB-T205 August (v2.0).
  Someone at - it just an idea as to what might happen?
  Thank you

  This may or may not be related but I was also faced with HDMI and TV on Media Center and Media Player playback.   You say that using the HDMI interface as a PC monitor works fine, just that WMC or MP do not play TV Live (I guess that's what you mean by "channel disappears").   I encountered the problem that I can not play back recorded OTA TV via the HDMI port, but it works fine on the computer screen, just as you describe.  I have not tried to directly play live TV like this so I do not know if this also fails.  However, I discovered that WMC and MP read properly on the TV connected via the analog VGA port on the laptop.  You can try to hook up a monitor via VGA and then try to watch television on the subject.  In my case, the HDMI connected TV present a good computer bureau and icons, etc, but when I tried to play recorded TV, Media Player won and gave me a message about missing files.  I find that VLC Player works with HDMI, but it does not play HD as well as WMC material due to its fine use of the acceleration of graphics chip.

  If your tuner key comes with the TV/DVR software (most of them do), you can also try to run that and see if it works on the HDMI monitor.  I posted a query on this forum about the problem I found in mid-October ("Mirrored display causes error CODEC... "), but no useful response so far.

• Are there already experiments with FM 2015, scaling of the image to its original size in the HTML output

  FM 12 provides the following procedure (as read in the manual) to see the images in original size in the HTML output. I did and was happy. But now in 2015 of the FM, the operation is no more.

  > >

  In the Setup file (settings.sts) you can set the image (default size) the parameters width and height to 0pt so that images in the HTML output are displayed in the original format. FM 12 it worked fine. The result was, that the style to the statement tag < img > is deleted in the HTML code output, so that the images keep their original size. But now in 2015 FM it seems there is a bug. The same procedure has the effect that the style statement is in the HTML (is not deleted) and width and height are on 0x0pt. The result is that all the images are invisible. If I disabled 'Preferred size' images in the HTML output are always scaled down in a 'random' size, nobody knows where it comes and how I can trouble or spend that in 2015 scaling of FM.
  

  > >
  

  Anyone who has ever even erperiences with the new 2015 FM?

  THX
  

  Hello

  There was a bug in the publication process of FrameMaker for which we had planned a work around to set the width and height 0pt. Now we have fixed the issue when you set 0pt as the width images will no longer appear.

  Now in your output images will seem to have the same size, such that they appear in the documents of source if preferred size is not defined. If this isn't the case, you can share your example of source document so that we can have a look.

  Thank you

  Ritesh Kumar

  [email protected]

• Why a big animated image of 4 square (as shown in the attached image) appears in a sensitive HTML output? Is it because I am using a trial version?

  Hello!

  Does anyone know why a big animated image of 4 square (as shown in the image below) appears in a sensitive HTML output? Is it because I am using a trial version?

  The image below shows the result after I imported a Word file into a trial version of RoboHelp 2015 and then sent to a sensitive HTML file.

  Your help would be very appreciated.

  David

  

  Dear Pierre,

  Thank you. After you apply the hotfix, the output seems OK now in Chrome, Firefox and IE. Thank you very much!

  David

• No HTML output

  Hello
  
  I use Oracle Business Intelligence 11.1.1.5.0
  
  If any graphic creates no result, older versions of bi, I wasn't using any html output.
  
  How to manage this version 11, you know about it?

  Try this

  1. change the analysis that you want to add a custom message.
  2. click on the ' analysis Editor: results tab.
  3. click on the properties toolbar button. The 'Analysis properties' dialog box is displayed.
  4. in box no. results settings, select display a custom Message.
  5. in the header field, enter the text of the custom message header.
  6. in the Message field, type the explanatory text.
  7. click on OK.

  If brand aid

• The first 250 characters of the HTML output

  Is anyone know how the first 250 characters of html output file.
  I use a cfinclude to the output file, but sometimes the HTML is really long and there are other things on the page. I would like to limit the HTML for a number of characters and to give the user an option to read the rest.
  An example but this is not a job would be < cfinclude template = "#left(file.htm, 250) #" >. I know that this does not work, but he would if the information was in a database.
  
  Any suggestions?
  Thank you

  
  
  
  #left(mytext, 250) #.

  You may also want to strip all html out of var mytext tags in the order
  do not have CF cut in the middle of a tag and make it to the exit:
  
  #left (trim (rereplace (mytext, "<[^>] * >", "", "all")), 250).
  

  Azadi Saryev
  SABAI - Dee.com
  http://www.SABAI-Dee.com/

• Can I receive via an XML web service in the PDF form?

  Hi all, I am able to send data to a server via a web service configured in my button send email.  Once the data has been received on the server, a reference number is returned.  My problem starts here as reference number comes back in my browser and not in the PDF file.  How can I get the reference number in the PDF?  Thank you J

  If you actually submit the XML via a web service you shodul be able to bind the output of the web service to a field in your form. You have configured a data connection to a WSDL file?

  You say that you submit via a webservice in your button send email. That made no sense than that described two submit operations on the same key. I suspect that you send us by e-mail and that the server is answer via a HTML page... .Hence the browser is to intercept and place it on the screen (outside your PDF file).

  Hope that helps

  Paul

• How repeat/option output values from XML in the CLOB column?

  Environment:

  
  

  Oracle 11.2.0.3 EE on Solaris

  
  

  Very much a newbie XML but try.  :-)

  
  

  I have a table with the XML stored in a CLOB (no, I can't imagine the environment but I live here).

  
  

  I need to display the data in a flat file format.  Some of the data is both optional and possibly repeat if present.

  
  

  Here's a fun sample data:

  
  

  "< res: customers xmlns: res = ' http://www.whatever.com/response ">

  < res: lastName > SMITH < / res: lastName >

  < res: firstName > JENNIFER < / res: name >

  < res: Extras >

  < res: Extra >

  HOME < res: phoneType > < / res: phoneType >

  555-555-5555 < res: phoneNumber > < / res: phoneNumber >

  < / res: Extra >

  < res: Extra >

  < res: phoneType > MOBILE < / res: phoneType >

  666-666-6666 < res: phoneNumber > < / res: phoneNumber >

  < / res: Extra >

  < / res: Extras >

  < res: lastName > JONES < / res: name >

  < res: firstName > ROBERT < / res: name >

  < res: Extras >

  < res: Extra >

  HOME < res: phoneType > < / res: / phoneType >

  123-456-7890 < res: phoneNumber > < / res: phoneNumber >

  < / res: Extra >

  < / res: Extras >

  < res: lastName > MURPHY < / res: lastName >

  < res: firstName > SEAN < / res: name >

  < / res: customers >

  I'm trying to get my output to look like this:

  
  

  Last name first name model number

  ------------- -------------- -------- ---------------

  JENNIFER SMITH 555-555-5555 HOME

  SMITH JENNIFER MOBILE 666-666-6666

  HOME OF ROBERT JONES 123-456-7890

  SEAN MURPHY

  
  

  I don't know how to get the repeated lines printed and I don't know how to get the printed line that does not contain the optional data.
  

  
  

  Here is the script that I have developed so far.  With my actual data I can get the printed name and I can get phone information printed out but only to the exclusion of the names. I was unable to get the data if the optional data is not present.
  

  
  

  I tried to refer to information from phone and then back up to 2 levels for the information of name but I receive: ORA-19110: no support for XQuery expression

  
  

  Select x.*

  client m.

  XMLTable (XMLNamespaces ('http://www.whatever.com/response' as "res") )

  , ' / res: clients/res: res/Extras: Extra '

  by the way of xmltype (m.CUSTOMER_XML)

  columns

  lastName varchar2 (80) WAY '... /... / res: LastName'

  , name varchar2 (30) WAY '... /... /FirstName'
  

  , varchar2 (30) phoneType PATH '.'

  , number of phone varchar2 (30) PATH '.'

  ) x

  Any help is greatly appreciated.

  
  

  -gary

  Hi Gary,.

  Are you sure the sample XML code correspond to your actual data?

  The second query expected error because the PATH expression refers to multiple targets.

  If it's really like that, the XML structure is not very easy to deal with. It would be wise to have a container element enclosing each customer information, like this:

  http://www.whatever.com/response">

  SMITH

  JENNIFER

  HOME

  555-555-5555.

  MOBILE

  666-666-6666.

  ...

  To answer your main question, you can use an OUTER JOIN to include data that do not have Extras.

  Using your original sample XML, something like this works for me:

  SQL > select x.lastName

  2, x.firstName

  3, y.phoneType

  4, y.phoneNumber

  client 5 m

  6, XMLTable)

  7 XMLNamespaces (default 'http://www.whatever.com/response')

  8, ' for $i in/clients/first name

  9 return element {} r

  $i 10 / following - sibling:Extras [1]

  11, $i/next - sibling:firstName [1]

  12          , $i

  13          }'

  14 passage xmltype (m.CUSTOMER_XML)

  15 columns

  lastName 16 varchar2 (80) PATH "lastName."

  17, firstName varchar2 (30) PATH "first name".

  18, extras xmltype PATH "Extras."

  (19) x

  20, XMLTable)

  21 XMLNamespaces (default 'http://www.whatever.com/response')

  22, ' / extras/Extra.

  23 passage x.extras

  24 columns

  VARCHAR2 (30) 25 phoneType PATH "phoneType".

  26, phoneNumber varchar2 (30) PATH "phone".

  27       ) (+) y

  28;

  LASTNAME FIRSTNAME PHONETYPE PHONENUMBER

  ------------ ----------- ----------- --------------

  JENNIFER SMITH 555-555-5555 HOME

  SMITH JENNIFER MOBILE 666-666-6666

  HOME OF ROBERT JONES 123-456-7890

  SEAN MURPHY

• Simultaneous report runs very slowly when the output format is 'XML' on IBM 6.1

  We have recently updated one of our test server database IBM AIX 5.3 to 6.1 operating system. We are witnessing a strange question in the execution time-out of simultaneous reports that have output in XML format (no server of publication and the Publisher). Whenever the output format is set to XML, the execution time seem to have increased very high than it used to be less than 5.3. A report to take 10 seconds which takes about 4 minutes to complete which is huge in comparison. Information about the version as below

  Oracle EBS 11.5.10

  Oracle 10.2.0.4.0 DB

  IBM AIX 6.1 OPERATING SYSTEM

  Oracle reports 6.0.8.28.0 (I know old enough)

  Provide expert advice.

  Thank you!

  All the

  We have solved the problem. I would like to share for the benefit of the readers of the community, if they are facing similar problems.

  The reason for the slowness of the report was due to lack of installation of the 'VIEW' option that is used when XML reports. Reports whose outputs are in format PDF, XML, HTML etc, Post Script, they all need a virtual display makes setup and configuration properties of config pointing to this server whenever settings are do. It could be a windows machine with X-Server running on it for display purposes or it could be services that are running on the same server for Unix/Linux applications where the application runs. We have installed VNC as X-Server that hosts services for virual (X) output for display on UNIX itself and have configured it in the reports configuration file. It seems to have solved the problem and the reports are run as expected (must faster!)

  Thank you

  Girish

• Flow XML / XSLT

  Hi, I need to integrate an XML stream into a Web site and understand that I have to learn XSLT... What is completely new to me.  The power supply looks like this:

  <? XML version = "1.0" encoding = "UTF-8" ?>

  - < WholeBodyList >

  - < Tests >

  < Title > Blood </ Title >

  </ Tests >

  - < Tests >

  < < Title > Joints </ Title >

  </ Tests >

  </ WholeBodyList >

  I had hoped that by using a standard RSS (for example Google gAjax FEED) reader and CSS would be enough... .but it didn't!

  I would be very grateful if anyone could put me in the right direction... even if I need to mount a strong learning curve to learn XSLT.

  Thank you very much

  Simon

  I was going to post a bunch of code and thought that this link might help you more than anything else...

  http://www.w3schools.com/xsl/tryxslt.asp?xmlfile=cdcatalog&XSLTFile=cdcatalog

  It shows an example of xml data, the XSLT used to use it in html, and a sample of the results below the two.  Hope that helps!

  How did you need display the XML code in the site?

• Embed html tags in an xml file

  Hello!
  
  Can someone tell me how to incorporate basic html tags into a legend in an xml file? IE hyperlinks etc. Thank you

  Stefan83 wrote:
  > I'm afraid that its still does not. I tried to copy and paste the code you
  > gave me, but the hyperlink is just displayed as text rather than as a real
  > link.

  XML does not use tags as hyperlinks. It is simply a neutral platform
  way to store and disseminate information. If you do not use a CDATA
  section, XML treats the contents of the as separate items:

  * a text until the opening tag node
  * a child element called with an href attribute
  * a text inside the tag node
  * a text following the closing node tag

  A CDATA section ensures that the content of the tag
  treated as a single entity, but XML is not any idea of the way in which it
  should be displayed. In regards to the XML document is, there
  simply data characters (these are what represents CDATA). Normally, you use
  XSLT or DOM manipulation (by Spry, for example) to determine how
  It is displayed.

  If you are using Spry, you define the column type of legend
  "html". This feature was not included in Spry 1.4, the default in version
  Dreamweaver CS3, but it is supported in Spry 1.6. You need to upgrade to
  Spry 1.6 and code manually the column type like this (assuming that the name of)
  your dataset is ds1):

  DS1.setColumnType ("caption", "html");

  The previous line will immediately after the code in the head of your
  a page that creates the data set.

  If you're new to XML, all this probably sounds complicated, but it
  is not really. XML deals with plain text and tags can be called almost
  just what you want. In HTML, the browser knows how to display a

  
  tag. In XML, atag can contain anything. For example, it is
  Quite right XML:

  
  

  Chippendale
  

  XML tags describe their content, but they don't say how the browser to
  view this content.

  --
  Adobe Community Expert David Powers
  Author, "The Essential Guide to Dreamweaver CS3" (friends of ED)
  Author, "PHP Solutions" (friends of ED)
  http://foundationphp.com/

• Why fonts Html sent via TB change when received by OE?

  As of the trials, while trying the installer of TB as I want to, I send me html email, fonts = Tahoma 12 point and he then received on two different computers, in two different email clients - TB on that and Outlook Express 6 on the other.

  From: OE OE and also tuberculosis: no problem - fonts appear exactly as sent.

  The CT of tuberculosis and OE: no problem during his return to the TB, but EXCHANGE of POLICE WHEN RECEIVED BY OE (both Roman - serif font, when one serif was composed!).

  The police in question - Tahoma - is considered to be web-safe; not only that, it's the default font on my OE, then I don't understand why OE should be badly made a TB email which uses this font.

  I have read in the previous posts of the forum (from 2006-7), that TB is not 'say' what the police she would prefer the recipient mail client. Is this true? Can we change it? (If OE can do it, why not TB)?

  I read some posts where the idea of trying to format the e-mail is pooh-poohed; I'm sure that there are a myriad of technical barriers involved (sure seems like it, at least with TB), but it's 2015 - people use email for business, not just recreational, and presentation is very important in these communications.

  BTW: I checked my OE settings, to see if there is anything which would determine the fonts displayed on incoming emails, but I can't find anything to that effect. The default font is Tahoma.

  I would really like to know what is the cause! I thought I was about to solve this email migration/trek...

  Thank you, in advance, for any help!

  As far as I know, and that's how it works on my computer.

  If you set the default font in Options, and when the composition, it will appear to use this font. But if you check the source of a sent message, you will see that no police is mentioned which means the recipients personal choice of how they want to see the message will prevail.

  However, if you compose the message, and then select the text and choose a font in the menu drop-down available, then a defined font is specified. If the recipient is allowing messages to use other fonts and the font is available on their computer, it will then display.

  Test:
  I put tools > Options > display > font default formatting "new mail".
  I put the 'Advanced' to 'allow messages to use other fonts ".

  Write a new message.
  In the first line of text I used everything that is automatically selected when I started typing, which was new Courier.

  I wrote a second line and then highlighted text and selected 'Times new roman '.
  Sent the email to myself.

  When he arrived, the first line has been mail because it is the default display font chosen, but because I allow the sender defined in other fonts, I see the second line with Times new roman.

  If I then go back to tools > Options > display > formatting and click "Advanced", then uncheck the "allow messages to use other fonts '.
  Low and here it is - all of the text in the received message has now changed my default display setting - Courier New.

  So, it depends on where you specifically set a font using the formatting bar and also depends on whether the recipient is to use other fonts. Of course, it will depend on if the recipient has made the available font, that otherwise he will use it that is available.