HP pavilion p6630f supports output via connector dvi - d to dvi - d to hdmi audio adapter?

Similar Questions

• No the D3100 HDMI audio output

  I'm trying to connect my TV to JMB in my Dell Inspiron 7559 via the D3100 docking station. I have a picture but no sound. There is no HDMI option in the audio device Manager Windows 10. When I connect the TV directly into the laptop I have no problem with the audio.

  Hi Robert,.

  For your info, I had the problem solved on the DisplayLink Forum: -.

  "The D3100 Dell delivers the sound to multiple output at the same time, unlike the dedicated graphics card audio adapter, it will not take the name of your amplifier as it can not take several names." It would be a little overwhelming to get 5 new audio devices (2 HDMI, 1 DP, 2-shot) just to the dock in any case...

  If you get no sound on Sony receiver, can you try to remove the plug to see if this helps it?
  I don't know how to put Dell up audio on their dock.

  It worked for me.  I removed the plug back and hey presto sound has been rerouted to HDMI!

  See you soon.

• sound via DVI - D to HDMI

  I recently acquired a renovated Pavilion P7-1010 running Windows 7. It has no HDMI output, but it has a DVI - D output. I would like to hear the sound through the speakers integrated HDTV (I don't have speakers or an external audio system). I tried to use a DVI-D-HDMI cable and get a picture, but no sound. Is it possible to send sound via the DVI - D port?

  This widget could not be displayed.

• SX10 Audio output via external active speakers, VGA mini-jack 3.5 mm

  Hello

  We have a SX10 which works very well in the test connected via an HDMI cable to a TV, but we would like to have all the outputs audio codec go to a pair of external speakers.  We tried

  A. using a few different de-embedder HDMI devices to strip the audio from the HDMI connection, with the exit to those who are related to some of the speakers

  B. using 'active them external speakers, 3.5 mm mini-plug' in a little amp with the connection of speakers to the ceiling grid

  Anyway, the audio ONLY happening to the speakers are the ' incoming call ringtone ' but we cannot hear audio from the remote site. Using only the HDMI cable itself to a TV, you can hear the audio from the remote through the TV.

  Is there something we're missing?

  I just tested your question here and I heard all the audio via the 3.5 mm output, I used a HDMI-DVI cable so that the audio would not get on TV via the DVI connector.  However, if I used a straight HDMI cable instead of a HDMI-DVI cable, all the sound elements transmitted via the HDMI cable and output 3.5 mm.

  No configuration has been made on the SX10, audio settings configuration is always default.

  I do not have a de-embedder to test with so I couldn't check for you.

• Sound is more output via HDMI

  Hello

  I have a desktop HP m9300t with Vista 64 Bit SP2. It has a video card Nvidia GeForce 9300 256 MB with a HDMI output (and DVI).

  I've always been able to play the video and sound through an HDMI cable connected to my TV. A few weeks ago, I ran a few updates and uninstall several programs I do not use or need. I installed the Vista SP2 and updated my nvidia driver for the last available on the nvidia website. Now, I can only video output via HDMI, but no sound.

  I have the Realtek HDMI output defined as the default device under sound-> read (and it shows like 'work'). When I test it, I can see the volume up and down bar, but there is no sound on my TV. I also tried many different programs (WMP, Winamp, Media Player classic, Firefox, but still no sound.)

  Sound works fine in my computer speakers when I put as device by default.

  I tried two different HDMI cables, which I know work because they took out his other devices.

  I've updated my audio driver for the last available.

  I installed an older video driver without success.

  I scoured the internet for hours, but nothing I can find solves my problem.

  Hello

  Check the device settings in device that receives the stream of video and audio HDMI.

  What camera brand and model has no sound via HDMI?

  What is plugged into the SPDIF Jack on the back of your PC, no matter what?

  Go to www.realtek.com and download and install the latest audio driver.

  Go to www.nvidia.com and download and install the latest video driver.

  You could also try to uncheck HDMI and check digtial output and see if that produces sounds.

  These "how-to" HP articles can also provide assistance.

  Even the latest drivers and updates may cause the problem.  I have run into a problem of sound with Realtek and had to fall back to the original audio driver supplied with the PC to get his job.  Five months later, Realtek audio driver problem fixed.  You need to maybe do this or maybe go back to the last good Windows restore point known. Of course if it does not then you would have to depend on your image less hard drive backup.

  It is also possible that your HDMI audio circuits are bad.

• RALink wireless Pavilion p6630f desktop

  I bought a new computer Pavilion p6630f desktop, installed wireless.

  From the outset, there has been no sign operating the Ralink RT2860 (works).

  Drivers have been updated and declared operation be Device Manager.

  A wireless computer in case installation is new to me.  I was expecting an icon, or lists of programs would allow me to set up the wireless with security and preferences, etc. as it is with, say, a D-Link router external.

  What I'm missing here? I have not be able to justify all this problem on the site of Ralink or with the HP support site.  As I found it, HP doesn't make absolutely no mention of the card wireless installed or the setup of software/firmware, did in fact, no manual for 6630f Office.

  Working in obscurity as a rank amateur in this case.

  Any help?

  Thanks for the reply Erico.

  I am fully aware of the support site thanks.

  The problem is not a network.  The question is to be able to control the Ralink wireless and having it recognized by the 6630.

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• G6-1b70us Pavilion. Picture but no sound from the tv when you use HDMI. Worked without problem.

  I have a pavilion g6-1b70us I'm trying to connect my TV with an hdmi cable.  I get a picture but no sound.  Previously, this worked without problems.  When I shoot to the top of my reading of the sound settings, the only options are speakers and the headphones.  When I shoot to the top of my devices, the Samsung TV is there, but it is described as a "generic monitor" (thinking it was weird).  I have uninstalled and reinstalled my intel graphics driver and IDC audio driver but still no sound through TV.  Also, I will mention that in sub control panel > sounds and devices there is a link to the SRS Premium Sound technology.  As you can see in the image below, the Samsung device is, but it is greyed out and cannot be selected. Can someone please?

  Well in case anyone is interested I have solved the problem (only took me 12 hours to understand, lol).  Apparently, even if the Samsung TV did not appear in the audio options, you can still right click in the empty box and a toggle option will appear.

• First CC 2015 - 'no audio output channel valid for found a reading. Please check audio hardware preferences. »

  I just updated from CC 2014v2 until 2015.

  When I open any project or create a new and import any media type - I get a yellow warning at the bottom of the display window showing 'no audio output channel valid for found a reading. Please check audio hardware preferences. "When you press Play, no sound plays and the read head does not move.

  Here is my audio hardware preferences - Realtek is my only option. Everything was going well in 2014 CC this afternoon and I have CS6 installed, which opens and reads the clips and audio without problems while listing the Realtek as the output device.

  

  HP Z820 - Windows 7 64 bit - 128 GB of ram. Adobe apps and system to this day.

  I could solve this problem by removing all plug-in in the directory "C:\Program Files\Adobe\Common\Plug-ins\7.0\MediaCore", which fixed the problem, then replacing them in batches until the returned error.  In this case, it was an outdated version of an addon Bluefish444.

• Tecra A10 with replicator - no output to the DVI port but analog works very well

  Hi all. It's driving me crazy. Brand new Tecra A10 with a nine port replicator and a new external LCD. When I plug them all in all and connect to the screen using the blue/analog/d-sub cable, the image on the screen of the laptop automatically turns on the external screen when the A10 is docked. But when the external display is connected with the white/digital/DVI cable, the Tecra and/or the Replicator is auto-switch the output to the external screen.

  In addition, when you press Fn + F5 to switch the LCD only to LCD + CRT or CRT output only, the Tecra is so "smart" as to "realize" there is no screen, and it switches the output to only the Tecra.

  Now, we would put in place with the blue/analog/d-sub cable, but the picture is wavey and not satisfactory at all.

  Just so we're clear - when the display is plugged into another computer, there is a beautiful clear picture on/through the white/digital/DVI cable, so I don't think it's screen.

  Can anyone help with this please? Is the Replicator defective? Or am I missing something?

  Thank you very much

  As the portable Akuma (graphics card) does not have a DVI output.

  If you use the VGA cable, but image quality should not be worse as with the DVI cable.
  Choose the display resolution higher than the monitor supports and 60 Hz.

• Area 51 motherboard - R2 supports NVMe via PCIe SSD?

  Motherboard of the area 51 - R2 supports is SSD Intel 750, Samsung SM951 NVMe, HP Turbo Z G2?

  Thanks a lot for the following upward. I tried the new BIOS update, but unfortunately, it has not solved the problem with my SSD PCIE.

  For area 51 R2 owners who are considering the purchase of an SSD PCIE (or m2 with adapter PCIE SSD), that's my experience with a Samsung SM951 AHCI 512 GB SSD as a reference.

  My system is area 51 with 3 X GTX980, i7-5960 X R2.

  The SM951 itself requires an m2 or PCIE X 4 3.0 logging and is capable of running sequential read-2150 MB/s, write-1500 MB/s, BUT NOT ON CETTE MACHINE! Oh well, at least not with the PCIE X 4 connector on it.

  I used a PCIE X 4 3.0 connector adapter to connect my SM951 since there is no slot m2. And the speed test with ATTO Disk bench, AS SSD Benchmark and HDTune are everywhere:

  Sequential read-1550 MB/s, write-1200 MB/s, which is about 75% of the full speed of SM951.

  My first thought me I had a bad SSD, but I was wrong.

  I then unhooked one of the GTX980s and connected via the PCIE SSD 8 X instead of X 4 location on the motherboard. Then the magic happened, the test speed is just right:

  reading-2150 MB/s, write-1500 MB/s, the maximum speed of SM951.

  After some research on the internet, my best guess at the moment is because the designer of area 51 R2 does not thing of M.2 SSD or PCIE SSD as a big problem in time (this is probably why the motherboard 2 X 99 of the area has no slot m2 while other brands is not), so they set up somehow the PCIE X 4 as version 2.0 connector (to give the bandwidth for the) three GTX980s)? So it would NOT the PCIE X 4 slots to provide sufficient bandwidth for high-speed SSD.

  May be I'm wrong with guess. It would be appreciated if someone could provide an idea or a solution as the PCIE X 4 slot is not working properly.

  CONCLUSION:

  For those who own the Alienware Area 51 R2 with 3 graphics cards and contemplating the purchase of a high-speed SSD PCIE, I highly recommend waiting for a new BIOS solve the problem of the PCIE X 4 slots. (new version A02 does not solve it).

  For those who own the Alienware Area 51 R2 with 1 or 2 graphics cards, go ahead and buy the PCIE SSD if you want. Once you fail to reach the speed of falling with the PCIE X 4 connection, try the PCIE X 8 connector, it should work properly.

  PS: Thanks again for those who see this as a problem. The age of the PCIE SSD is coming. And the only way to make the Alienware is better admit everything first missing something :)

• Second monitor not detected via the dvi - d port

  Hi I have a Hp slimline s5610y. Windows 7 64-bit. It is a new system with 3 ghz ram and more than 600 gaeremynck ram so I know that this is not a problem of performance, (duty handling system), I am looking to hook up two monitors, product sheet page on H.P. States that ports Vga and Dvi d may be used at the same time. I have the converter dvi-d/VGA, hooked to a monitor via the Vga port on a single computer (which doesn't work). The Vga port to vga works fine (the first monitor. I already check the easy as stuf "carrier dual monitor", unplug the monitor, update the latest driver for radeon 3000 and restart windows. I hooked two monitors before without any problem. Any ideas out there?

  Thank you

  Manny

  Hi again,

  If it is a dvi - d, you need a computer screens which have dvi - d.
  A graphics card with a dvi - i port also supports vga monitors.

  OK - page of your product (return i/o ports):
  http://support.HP.com/us-en/document/c02552467

  It is a true dvi - d - then Yes, you need a digital monitor with a dvi - d port.

  C.

• Pavilion x 2 10-n156na: Connector for charging the battery

  I recently bought this product and it will not load upward. It seems that the connector of money on the side of my Tablet inside is loose. This has now come away with the charger and I can't work on how the get connected in so that allows me to recharge the battery

  Hello and welcome to the HP support community!

  Unfortunately, we can not help you with a piece of hardware.  You must contact HP directly.

  To contact HP directly, click on this link: http://www8.hp.com/us/en/contact-hp/support.html

  Fill out the form, get a case number and possibly a link to phone numbers is displayed.
  
  WyreNut

• HP Pavilion DPGEK44 Gaming: HP Pavilion Gaming DPGEK44 connected via the monitor HP Pavilion 24xw - no sound

  The sound on my laptop works fine until I connect it via HDMI to a monitor HP Pavilion 24xw.  Then the sound disappears.  If I disconnect it, the sound comes back.

  I tried to go to the 'Sound' of the control panel section.  There are two options:

  Realtek High Definition Audio speakers

  HP 24xw

  The default value is Realtek speakers.  When I use the test installation my laptop plays the sound test.  I've updated to the latest version of the driver.

  If anyone can help with why where the monitor audio disappears from my laptop?

  Thank you very much!

  Hi @Cat999,

  Welcome to the HP Forums!

  I understand that you have problems with your HP Pavilion Notebook DPGEK44 game, when you connect the HDMI cable to a HP Pavilion 24xw monitor. I'm happy to help you!

  Please try the steps in this guide, Troubleshooting HDMI screen and sound Issues.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• R830 satellite and video output via HDMI

  Just wondering if it is normal that my laptop for a max of 1280 x 768 HDMI to my TV LCD 26 '' exit?

  Its an i3 Satellite R830 with graphic hd3000. I have 8 GB of RAM. Tried on Windows 7 and 8 but the same thing.
  I tried custom resolution, but he's also saying on the TV out of reach.

  MT graphics driver is up to date and I got full HD working on this TV via another laptop old.

  Any suggestions please?

  I don t know your LCD TV listing, but always is he that external resolution depends on three options:
  driver graphics card, graphics card and the external device connected to the computer/laptop.

  So if your TV does not support a higher resolution, you will not be able to choose another resolution.
  If your TV supports a higher resolution but the graphics driver and the graphics chip would not support a higher resolution, you also won't be able to use it.