Back to its location by default, the registry database

Similar Questions

• Crash when updates at shutdown lead Error message 'one of the files in the registry database had to be recovered by use of one newspaper or another copy. Recovery succeeded. »

  Yesterday, I was using my laptop at the farm level is critical. When I stopped him, 9 updates began to occur when closing. Unfortunately, the laptop ran out of battery before that update has been completed. When I rebooted the professional windows xp, an error message "one of the files in the registry database had to be recovered by use of one newspaper or another copy. Recovery succeeded. "came and this message constantly comes up whenever I start windows. I have no CD with me as the operating system has been installed by the IT Department of my employer and I do not want to reinstall windows. I do not know how to change, and then make the changes in the registry via regedit. If anyone know to solve this problem, I would appreciate your help. I never wait for windows updates could cause such problems.

  Hello

  • Your computer is on the field?
  If it is connected to a domain, then you can post your query in this link:
  http://social.technet.Microsoft.com/forums/en-us/categories
   
  If it is not then what is the error message in the history of the magazine update on the windows update site?

  See also fix it for windows updates.

  http://support.Microsoft.com/mats/windows_update/

   

• During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry. How can I do this?

  Original title: Registery Error Message

  During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry.  How can I do this?

  Hello

  • What were the changes made before the problem occurred?

  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• delete the oracle database without accessing the registry database

  Hello
  Can I remove my machine without accessin oracle g
  Registry database?
  I was informed by my professor who is possible
  but as my experience in the installation of oracle, which causes the installtion stop somewhere?
  can you please?
  Oracle 10g
  OS Windows xp

  The Oracle 10 g 2 uninstall process does not affect the registry. The registry entries must be deleted manually.

  http://download.Oracle.com/docs/CD/B19306_01/install.102/b14316/DEINSTALL.htm#CIHIHDAD

  Srini

• My weird pages load the writeing text is all smeared as if I click on back but its top-down of the entire page

  hard to explain but the test I read, I opened firefox seems all smudged if I click on the words apear but it seems to be all pages, even this one it's like half the pieces inself letters are missing.

  Inexplicable display abnormalities often indicate an incompatibility between Firefox and the software driver graphics card. Sometimes you can update or cancel only the software to fix the problem. However, as an immediate solution, try disabling the use of Firefox hardware acceleration of graphics.

  the button Firefox orange (or the Tools menu) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  It will take effect after you exit and then restart Firefox.

  Which solves the problem? If so, a compatibility issue is the likely problem.

• Set up shared Services and the registry database connection

  Hello
  
  I reinstalled Hyperion Planning 11.1.2.1. When I run the configuration tool, in the screen 'Set up shared Services', I can't select the option "Perform the first time shared services database configuration".
  
  How do I activate this option?

  You can have a quick look here clean uninstall:
  https://blogs.Oracle.com/HyperionPlanning/entry/clean_uninstall_11_1_2

  See you soon... !!!

• Shrink the registry (CFVariables)

  Hello
  
  We have been having some problems with our servers recently and looking into it, I discovered that the registry hive of the software on the two servers was around 2 GB, now I know that windows 2003 is not a limit on the hives, but from my point of view, it's not good for the health of the server (explains why sometimes it takes forever to start and we get BSOD on hives). After a bit of rooting, I discovered that Coldfusion 6.11 is to store client variables in the registry. I'm looking to reverse that to a SQL database in the new few days.
  
  My real question is, Macromedia/Adobe offers a util which comes out clean of all the elements of its summer store in the registry, so I can get my server back to normal?

  I downloaded the bleeding next to http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_17881 adbove tool

  This empty more 450 000 entries recorded in the registry.
  Although the registry for software hive was still 2GB, I then used a registry compacting (probably best that I've seen) tool from http://www.experimentalscene.com/download.php?list.2 it then narrowed the hive software up to 14 MB!

  I have now converted to the use of the SQL storage and I just have to wait now to see if we continue the BSOD hive. It was on Windows 2003 Standard Edition SP1

  Doug

• DVD player, corrupted in the registry

  When I put a disc in the dvd drive, it does nothing. When I go into my computer, it can not see the drive.

  When I look at the dvd drive in the Device Manager it tells me,

  "Windows cannot start this hardware device because its configuration.
  information (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and
  to see if there is a solution available."

  When I do this it redirects me to a page where I can spend $80 for Nero 9.

  When I get Code 19 at Microsoft it tells me that the information in the registry are corrupted and I have to edit the registry, but where in the registry to change or what to change for she doesn't tell me.

  If I try to update the driver it tells me the driver is up-to-date and it won't change.

  Am I right in thinking that if I simply uninstall the dvd drive and reboot Vista will automatically reinstall and download the driver on the internet?

  That the answer did not work, it comes up saying the same thing.

  So I tried restoring the system again, using the same restore point, I had the first time, and it worked.

  No idea why.

• is deframenting the hard disk and the registry of the same thing?

  I want to know about defragmentation. I see one of my apps, there is a key to defragment the registry database. So, I see; Defragment the hard drive. While I see; disk defrafmenter. What is the difference between all of them?  Thank you to answer. Annacolleen

  Don't mess with your registry database.

  Not the same thing as your hard drive.  The registry is not * need * defragmentation in my opinion, your drive is probably is done via a calendar in all cases.

• My taskbar is suddenly vertically on the right side of my screen instead of at the bottom. (default) Ive tried to bring it back to its original spot by clicking and now an empty space, but cannot get a reaction. How can I get that back to the default?

  My taskbar is suddenly vertically on the right side of my screen instead of at the bottom. (default) Ive tried to bring it back to its original spot by clicking and now an empty space, but cannot get a reaction. How can I get that back to the default?

  Right-click on the taskbar and make sure the taskbar are not locked. Then move it using the left mouse button. Microsoft® Security MVP, 2004-2009

• upper and lower filters in the registry how ca I get it back

  in the registry, how can upper and lower filters I get them back. CD and dvd not being recognized

  Hello

  You are not absent from these filters, you do not want in most cases.

  This is for Windows 7 and Vista is very similar.

  ------------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HL-DT-ST DVDRAM GSA - T10N ATA Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Hello

  My DVD/RW drive stopped responding on my Acer Aspire laptop computer 4510Z I checked the Device Manager which is gives the following error message:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I solve this error so far achieved the following without success:

  -Checked for solutions using the button below the error message
  -Scanned for hardware changes
  -Used Microsoft Automated Troubleshooting Service (SMAT)
  -Created the cdfix.reg file, it has added to the registry and restarted the computer

  I would be so gratefull for any help anyone can offer.

  Darylandgoats

  Hello

  I oddly found the solution to my problem while browsing through the suggestions of SpritX at the following link: http://forums.techarena.in/vista-help/771598.htm

  Here is the solution I implemented and now my drive works perfectly:

  RESOLUTION
  Warning serious problems might occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

  To resolve this problem, remove the affected filter drivers. To do this, follow these steps: 1. Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  2. Locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  Be careful it can be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.
  3. in the right pane, click UpperFilters, and then click on remove.
  4. click on Yes to confirm the deletion of the UpperFilters registry entry.
  5. in the right pane, click LowerFilters, and then click on remove.
  6. click on Yes to confirm the deletion of the LowerFilters registry entry.
  7. exit the registry editor and then restart the computer.
  Note When you delete the UpperFilters registry entry and the LowerFilters registry entry, you may lose functionality in certain programs such as CD recording programs. In this scenario, you must reinstall all of the programs involved. If the problem persists, contact the program vendor to determine if an update is available for the program.

  For information about how to contact computer software vendors, click the number in the following list to view the article in the Microsoft Knowledge Base:
  65416 (http://support.microsoft.com/kb/65416/) hardware and software contact information, A - K

  60781 (http://support.microsoft.com/kb/60781/) hardware and software details, L.-P.

  60782 (http://support.microsoft.com/kb/60782/) hardware and software contact information, Q - Z

  Thank you!

• Vista does not recognize my dvd ram drive, or a drive__Windows hard usb cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Error message when you open Device Manager and clicking on the dvd player. Drive does not appear in the window 'computer '. Max_devices downloaded, but it couldn't fix the problem.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) Cannot read CD/DVD

  Original title: Acer laptop DVD drive missing

  Hello

  I have an Acer Aspire 5740 G computer laptop running Windows 7. When I tried to play a movie today, it did not work. The green light on the drive of CD flashed several times then stopped and all was silent. I opened my computer and saw that the CD/DVD drive wasn't listening it. I then opened by Device Manager and the two things under CD-ROM/DVD-ROM readers had a yellow triangle and an exclamation point on them.
  One thing has been called; SVI 2ZGTAB8HQ7G5 SCSI CdRom Device
  The other thing was called; TSST Corp CDDVDW TS-L633C
  I clicked on both and saw the message; "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »
  The last time I used the CD player a burn a disc over a month. I used Microsoft Fix It but it says to remove the drive and plug it in somewhere else, and I can't really do this because it's the only drive on the laptop and I'm worried I might break if I go out there with force. Can someone help me? I would really appreciate it.

  Hello

  1. what Microsoft FIXIT did you use exactly?

  2 did you a recent software or changes to the material on the computer?

  I suggest you try the steps mentioned below.

  Method 1: Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I also suggest you run the FIXIT from the link below and.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 3:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  You can run the FIXIT or you can try the manual steps and check.

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Method 4:

  Re-install the drivers DVD

  Completely uninstall the DVD drivers from Device Manager, and then install the latest drivers for your computer.

  Open the Device Manager.

  Once the drivers are completely uninstalled, download the latest drivers from the manufacturer of the computer.

  http://support.Acer.com/us/en/product/default.aspx?tab=1&modelId=1878

  Hope this helps and keep us posted.

• How change the registry Vista so I can add my program in the default programs list?

  Hello

  I need help to change the register of Vista so I can't add Sibelius 5 to the list of default programs.

  I need to do this for some reason when I try to open the files .sib I need to open it with a program. So why I want 5 of Sibelius.

  However, when I do this, I do the normal navigation and select 5 of Sibelius in program files but nothing happens.

  I was in Control Panel and was in default programs and all that stuff in there, but still it's not helping.

  See you soon

  Hello

  We could do this in the registry, but it shouldn't. You mention that you went into default programs, but you don't mention if you have tried successfully to associate the file .sib with Sibelius. That's what I would try first.

  (1) navigation to the "default programs":

  In "Control Panel Home", select "Programs", then on "Default programs", choose "do a type of file always open in a specific program.

  Or b:

  Search "Classic view" for the "default programs". Select "Set your default programs".

  2)

  Scroll down the list until you see. SIB. Double-click on that. Select Browse and locate the Sibelius program.

  (Note: * maybe that is your problem.) --> Make sure you browse to the EXECUTABLE file. If you access a shortcut, it will not and it may not work correctly when you try to open later.

  * And you're good to go. Once it is associated with, you should be able to double-click the .sib file and run the program. Hope this helps,

  Steve <> Microsoft Partner