back to the top of the screen

Similar Questions

• While the iCloud recovery backup... continue to go back to the screen HELLO?

  I am currently trying to reactivate an iPhone with the last backup to iCloud.

  The iPhone asked me for the first update to iOS 9.3.1 (because the previous backup on previous iPhone did in 9.3.1 I guess... (and although this new iPhone showed 9.3.1!...)

  Now I'm gone screen HOLA-HELLO, entered a network wi - fi available, connected with my operator (with the right SIM card of course - phone work - test received call).

  However, now, so that this treatment with the recovery of backup, when I let the phone go to the screensaver, it keeps going back to the screen HELLO... Is * normal *?  Or should I suspect a problem with the iPhone 5?

  (Just bought from a dealer - it is seller-renovated, reliable source)

  Thank you

  Rob

  While iCloud restoration takes time - given the dependencies on your WiFi and the amount of content to download - it should not restart loop like this

  Restore your device from an iCloud or iTunes backup - Apple Support

• When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  The standard specifies:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• Windows Media Player is dragged off the screen, now I need to go back to the screen as soon as possible HELP

  SO I was using windows media player and makes it smaller.  Unfortunately I dragged off the screen too far to the right.  How get her back to the screen?  Help

  Hello

  Bring back moved off screen Windows on your desktop (keyboard Trick)
  http://www.howtogeek.com/HOWTO/Windows/bring-misplaced-off-screen-Windows-back-to-your-desktop-keyboard-trick/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Variables back to the screens passage

  import net.rim.device.api.ui.UiApplication;
  
  class Startup extends UiApplication {
  
      String name;
      ViewScreen _vs;
  
      private Startup() {
          name = "initial value";
          ViewScreen _vs = new ViewScreen(name);
          pushScreen(_vs);
      }
  
      public void setName(String n3) {
          name = n3;
      }
  
      public static void main(String[] args) {
          Startup theApp = new Startup();
          theApp.enterEventDispatcher();
      }
  }
  
  /////////////////////////////////////////
  
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.MenuItem;
  import net.rim.device.api.ui.UiApplication;
  import net.rim.device.api.ui.component.RichTextField;
  import net.rim.device.api.ui.container.MainScreen;
  
  public class ViewScreen extends MainScreen {
  
      private Startup _uiApp;
      private String nameView;
  
      public ViewScreen(String n1) {
          nameView = n1;
          _uiApp = (Startup)UiApplication.getUiApplication();
          add(new RichTextField(nameView, Field.NON_FOCUSABLE));
          addMenuItem(changeName);
      }
  
      private MenuItem changeName = new MenuItem("Change Name", 11000, 10)    {
          public void run() {
              _uiApp.pushScreen(new EditScreen(nameView));
          }
      };
  
  }
  
  ///////////////////////////////////////////
  
  import net.rim.device.api.ui.MenuItem;
  import net.rim.device.api.ui.UiApplication;
  import net.rim.device.api.ui.component.AutoTextEditField;
  import net.rim.device.api.ui.container.MainScreen;
  
  public class EditScreen extends MainScreen {
  
      private Startup _uiApp;
      private String nameEdit;
  
      public EditScreen(String n2) {
          nameEdit = n2;
          _uiApp = (Startup)UiApplication.getUiApplication();
          add(new AutoTextEditField("Name:  ", nameEdit));
          addMenuItem(anotherName);
      }
  
      private MenuItem anotherName = new MenuItem("Another Name", 11000, 10)  {
          public void run() {
              String n4 = _uiApp.name;                    _uiApp.pushScreen(new ViewScreen(n4));
          }
      };
  
      public boolean onSave() {
          _uiApp.setName(nameEdit);
  //      _uiApp._vs.updateDisplay();
  //      _uiApp._vs.doPaint();
  //      _uiApp._vs.invalidate();
          return super.onSave();
      }
  
  }
  

  I am new to Java and new to BlackBerry programming, so this is probably a simple question, but I'm stumped.

  What is the best way to pass a variable back to the screen that has already been posted once it is published on another screen?

  If you look at the three class files attached, I have a correction of exposure that shows a variable.  I then open an EditScreen, change the value and then close and save.  When the original ViewScreen appears again, it still shows the original value.  You can see the things I've tried (and commented) then the substitution of onSave, but they don't update the exposure correction.

  Thanks for any input.

  BlackBerry Curve 8900 v4.6.1

  Eclipse 3.4.1

  I thought about it.  I created variables for the fields in the first screen.  Then once you change the value of the field in the first screen, in the second screen, the field on the first screen will update as expected.

• 3 monh old oshiba lapop som numbrs & letters don had working on the back of the screen keyboard

  3 monh old oshiba lapop som numbrs & letters don had working on the back of the screen keyboard

  If it is still under warranty, contact Toshiba.

  SC Tom

• selection of the right Startup Repair boots me back to the screen to select reboot

  recently installed new graphics - no problem.

  has had to unplug my dvd player because the sata power cable is not reached. I bought a 4 pin sata converter plug in.

  Since then, I could not get into windows.

  But first, the computer would send signals to my monitor, no matter what I plugged. I have corrected it to mount tension on my diet, turn it off and set the voltage to normal... (no idea how it's fixed).

  I can get the boot screen/bios work, but then I get to the "was turned off during startup.

  start the system restart or start windows normally. If I get the startup repair it turns black for a second, and then I'm right back where I started at the same screen. If I choose start windows normally the loading bar appears and then the screen goes black.

  the first time I got it to start it says something about something not and he comes back at slow speed of DRAM. Not entirely positive, but something in this direction. I googled those terms out of memory and found it could be DQS training, but I have not overclocked or touched something like that.

  also, I had to turn my computer on and off a lot until I could get the monitor to work, so this could be a factor in this.

  on Vista 64 bit. Gateway dx4200

  just tried to get into the boot screen, safe mode requires the computer to restart.

  Thank you.

  don't know what happened, but it works again...

  Admin can mark it as resolved.

  Hello

  First thing to try is placing it back as it was before any change. Don't forget to reinstall the cards memory.
  and cables that you may have dislodged something. Which includes the removal of the video card for the test.

  If no joy then you no doubt using a computer store real (not the leeks and glances at a Best Buy
  or other stores) or Support technique Gateway.

  Check with the drivers, documentation online and Support technique Gateway.

  Gateway drivers and downloads
  http://support.gateway.com/support/drivers/dlcenter.asp

  Technical support Gateway
  http://support.gateway.com/support/?cmpid=topNav

  Door Documents
  http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Recently installed SSD, the left hand (the back of the screen) HOT

  So I recently installed an SSD in the iMac.But that I do not have a temperature sensor to be installed on the SSD.

  Spec as follow

  

  Ive been doing some research online and people said to avoid this direction fan / running on Full constantly to install SSD Fan Control, which i have and the fan became silent again.

  How ever look at the screen, if I put my hand up to left (rear panel) it seems to be real hot where the inverter card is I think?

  -What is normal?

  I've included some photos of SSD Fan Control temperature readings (SSD temp must be SATA as there is no sensor on it)

  

  I can't give you a reading temp of the left rear of the screen.

  Any information that would be great.

  Very simple, you must contact OWC (www.macsales.com) by phone and ask about their temperature sensor cable. You need to then open up and install the cable. Otherwise, your computer may overheat and cook something.

• Gray pixels below the back of the screen onto the Satellite Pro U series

  Hello.

  After a month since the laptop purchase date, I had a problem with my screen (a black point aprox. 1 mm size - not dead pixels but something like a bug between plans display, perhaps between the trubright and the lcd screen, whatever it is these plans I don't know not-on the side rear of the screen, on the lower part), solved by Toshiba customer service using the replacement of the screen.

  But, after one more month for the replacement, the problem was once again with some minor differences.

  My screen looks like now, on the lower part of the screen (about 1-3 cm of the bottom line) a few other gray (this time) points, each with approximately 5-15 pixels of size.

  I counted to date a total of four quite visible like these bugs and a few others having no importance because of very small size, on the different areas of the screen.

  I am concerned because it seems these gray he appeared on time, more points. What mean these bugs and what solution is there?

  I want to know your guys, if anyone has a similar problem, what the problem actually is and how you can permanently solve.
  (I can not simple running again for the service because I guess I'll do every month)

  Thank you
  Iulian

  PS: Please do not ask me how to clean it's screen. It is not my bugs he and the monitor (first surface I mean) have some some dirts. I'm very cautious in this regard.

  Hello

  We could speculate about this problem, what might be wrong; Map chart or screen itself?  :| ?
  I think it s a default display

  > I want to know your guys, if anyone has a similar problem, that the root of the problem is and how you can fix it permanently.
  Personally, I've never noticed these display problems on my laptop satellite.
  I think it is foolish to discuss on the reasons why this happens it looks like simply a hardware problem. You ask how do I solve this problem?
  In my opinion there is only on the solution; replacement screen.

  Contact the ASP guy and ask for later handling.

  Concerning

• Keeps going back to the screen "computer is not stopped correctly?

  A friend's computer won't start. When you press the power button, it loads well, until the screen where you can choose to start Windows normally, in SafeMode etc due to an improper shutdown. When you select one of the options, it is moving towards the following splash screen, but then instantly returns to the improper closing screen, when you select "normal" or "safe mode" etc. and does all over again, like a loop.

  It's Vista or 7, not sure which at the moment. No idea why?

  Hello

  Try a startup repair to see if the problem that will be solved.

  Here is the guide to Service Options while using a Microsoft Vista DVD (not the manufacturer's recovery disc).

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Back to the screen with reset

  Hi people,

  in my application, there are two screens:

  -screen--> a listfield with several check box and button

  -screen B

  Users can select the checkboxes and can push a button that call anti-pop method with new screen B as an argument. When users escape in screen B key, it automatically returns to A screen with already activated checkboxes.

  My question is, how do I return to the screen in its original state (unchecked checkboxes and cuestions another)?

  I hope that I explained

  Thanks in advance,

  Kind regards!

  F.F.: Sorry for my English

  Try like this example:

  Example of display:

  public class Def extends MainScreen
  {
      public Def()
      {
          createGUI();
      }
      public void createGUI()
      {
          EditField editField=new EditField("Enter: ", "");
          add(editField);
  
          ButtonField click=new ButtonField("Click", Field.FIELD_HCENTER);
          click.setChangeListener(new FieldChangeListener()
          {
              public void fieldChanged(Field field, int context)
              {
                  UiApplication.getUiApplication().pushScreen(new SamplePopupScreen(Def.this));
              }
          });
          add(click);
      }
  }
  

  and the popupScreen is:

  public class SamplePopupScreen extends PopupScreen
  {
      Def def;
      public SamplePopupScreen(Def def)
      {
          super(new VerticalFieldManager());
          this.def=def;
          createGUI();
      }
  
      private void createGUI()
      {
          add(new LabelField("Popup Screen",Field.FIELD_HCENTER));
          //Write your code to display on screen;
      }
      public boolean onClose()
      {
          def.deleteAll();//These three steps are for reset the screen;
          def.createGUI();
          def.invalidate();
          UiApplication.getUiApplication().popScreen(this);
          return super.onClose();
      }
  }
  

  Enter something in the edit field, and then press the click to see the difference that the screen is reset or not;

• Satellite M50 does not start, go back to the screen with different start modes

  My Satellite M50-130 does not start correctly. When you turn it on, it goes to a black DOS screen, saying: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "It offers me different start modes: Safe Mode, with networking and command prompt. Last good Configuration known; and start Windows normally.

  I tried all the 5 options, gets the commissioning insofar as the Toshiba screen, but then with all the options, it returns to the initial screen offering the 5 modes of starting. Same thing happens when laptop works again.

  The only recent software change, I've done was an update to Norton AntiVirus/Internet Security and I suspect that Norton is at least part of my problem, see history below. I know it's the Toshiba support site, but I tried Norton so many times without success, I gave up. Plus, I'm no expert at all, so I can't be sure that it is really the source of all my sorrows. All advice welcome!

  The performance of my laptop has deteriorated seriously in the last two months. She is extremely slow, and cleaning of malware and unwanted General does not help. It began right after that I renewed the license of Norton last year and upgraded to the 2007 version. The worst downturns are always connected to direct upcoming Norton upgrade programs. I disabled the live upgrade, but programs always come to the top, and I can't stop them, a popup tells me that they are protected.

  Wireless internet is also very capricious, even if another computer on the same network works fine.
  During the last week, I had to relax a little internet security settings (from "moderate to severe" to "low to medium") because after an other update of Norton AntiVirus, I couldn't access to interactive Web sites.
  It is perhaps a coincidence because Norton AntiVirus comes with updates at least twice a week - but what else could be the problem?

  My apologies for the long rant, I am grateful for all the advice!
  Thank you
  I have.

  Hello

  I think the only way to make your system works correctly again is to restore with the cdrom of onboard catering. Simply manage to save your data from your hard drive (the best way would be to put your machine's HARD drive in a USB - HDD enclosure and copy important data on another computer), then wipe the system completely off you hdd.

  After that, the system must run again...

  Welcome them

• How do you get the capture of lightroom tethered floating bar back at the screen once closed

  closed the bar through the X and now I can't restore the floating bar

  A good article on attachment to the.

  Mastering Lightroom: How to tether your camera

• Cannot navigate back to the previous screen (screen cannot be closed with the ESC key)

  Hi all

  I create simple BB app with eclipse jde 4.6.1, here the code example.

  class myApplication extends UiApplication
  {
      // applicatione entry point
      public static void main(String[] args)
      {
          // create an instance of our app
          myApplication theApp = new myApplication();
          // "run" the app
          theApp.enterEventDispatcher();
      }
      // app constructor
      public myApplication()
      {
       myScreen screen = new myScreen();
          pushScreen(screen);
      }
  }
  

  where my screen is like this

  public class myScreen extends MainScreen implements ListFieldCallback {
  private Vector menu;
  private ListField menuList;
  private MenuItem menuItem = new MenuItem("Details",100,10){
  public void run(){
  int index = menuList.getSelectedIndex();
  if (index == 1){
  Dialog.alert("list  "+index+" selected");
  }
  }
  };
  public void drawListRow(ListField listField, Graphics graphics, int index,
  int y, int width) {
       ListField menulist = (ListField) listField;
       MenuRowManager rowManager = (MenuRowManager)menu.elementAt(index);
       rowManager.drawRow(graphics, 0, y, width, menulist.getRowHeight());
  }
  
  public myScreen(){
  super(DEFAULT_MENU|DEFAULT_CLOSE);
  setTitle(new LabelField("myScreen", LabelField.USE_ALL_WIDTH | DrawStyle.HCENTER));
  
  this.addMenuItem(menuItem);
  createListMenu();
  }
  
  public void createListMenu(){
  menu = new Vector();
  menuList = new ListField(){
  protected boolean keyChar(char key, int status, int time){
  if (key == Characters.ENTER){
  // open next window
  int index = getSelectedIndex();
  switch (index){
  case 0: //
  break;
  case 1: //
  break;
  case 2: //
  break;
  case 3: //
  break;
  default: // about
  break;
  }
  }
  return true;
  }
  };
  menuList.setCallback(this);
  menuList.setRowHeight(60);
  menuList.setBackground(BackgroundFactory.createSolidBackground(Color.BLACK));
  
  // first item
  BitmapField mIcon = new BitmapField(Bitmap.getBitmapResource("image1.png"));
  LabelField lblM = new LabelField ("First list item", DrawStyle.LEFT);
  lblM.setFont(Font.getDefault().derive(Font.BOLD));
  MenuRowManager menuM = new MenuRowManager();
  menuM.add(mIcon);
  menuM.add(lblM);
  menu.addElement(menuM);
  
  // 2nd item
  BitmapField tIcon = new BitmapField(Bitmap.getBitmapResource("image2.png"));
  LabelField lblT = new LabelField("Theater Near Me", DrawStyle.LEFT);
  lblT.setFont(Font.getDefault().derive(Font.BOLD));
  MenuRowManager menuT = new MenuRowManager();
  menuT.add(tIcon);
  menuT.add(lblT);
  menu.addElement(menuT);
  
  add(menuList);
  }
  
  }
  

  and the definition of menuRowManager is like that

  public class MenuRowManager extends Manager
  {
      public MenuRowManager()
      {
          super(0);
      }
  
      // Causes the fields within this row manager to be layed out then
      // painted.
      public void drawRow(Graphics g, int x, int y, int width, int height)
      {
          // Arrange the cell fields within this row manager.
          layout(width, height);
  
          // Place this row manager within its enclosing list.
          setPosition(x, y);
  
          // Apply a translating/clipping transformation to the graphics
          // context so that this row paints in the right area.
          g.pushRegion(getExtent());
  
          // Paint this manager's controlled fields.
          subpaint(g);
  
          g.setColor(0x00CACACA);
          g.drawLine(0, 0, getPreferredWidth(), 0);
          //g.drawLine(10, 0, 10, getPreferredHeight());
  
          // Restore the graphics context.
          g.popContext();
      }
  
      // Arranges this manager's controlled fields from left to right within
      // the enclosing table's columns.
      protected void sublayout(int width, int height)
      {
          // set the size and position of each field.
          int fontHeight = Font.getDefault().getHeight();
          int preferredWidth = getPreferredWidth();
  
          // start with the Bitmap Field of menu icon
          Field field = getField(0);
          layoutChild(field, 48, 48);
          setPositionChild(field, 0, 6);
  
          // set the menu title label field
          field = getField(1);
          layoutChild(field, preferredWidth - 16, fontHeight+1);
          setPositionChild(field, 55, 30-fontHeight/2);
  
          setExtent(preferredWidth, getPreferredHeight());
      }
  
      // The preferred width of a row is defined by the list renderer.
      public int getPreferredWidth()
      {
          return Graphics.getScreenWidth();
      }
  
      // The preferred height of a row is the "row height" as defined in the
      // enclosing list.
      public int getPreferredHeight()
      {
          return 60;
      }
  }
  

  the problem is, when the first screen showed (pushed), I cannot "navigate back (close) the screen with ESC, won't my code?" Am I missing something here?

  Thanks in advance

  You want to substitute keyChar() into your custom domain.

  Don't forget that you must re - delegate all keystrokes that you do not consume.

• Replaced the cable. Now, the screen does not work. What could be?

  The cable coming out of the back of my monitor Apple Thunderbolt Display is fraying. I decided that rather than risk a short at a certain point, I preemptively replace the cable. On iFixit teardown photos, I decided to replace the cable coming out of the back of the screen myself instead of paying almost $200 to get an Apple service provider to do that here in Bangkok. Bought the cable on AliExpress for $12. It replaced. And... no dice. Screen has not come.

  My setup

  [MacBook Air]-[Thunderbolt Display]-[drive Thunderbolt]-[Cinema Display]

  with a key USB drive and Ethernet connected to the back of the Thunderbolt display

  Already tried this

  • First impressions were that the cable was defective. But then I noticed Ethernet came the USB has been mounted, Thunderbolt was mounted drive and after a reboot, the movie screen come also. Obviously, the cable has been working very well.
  • Second thought was that I'd neglected to plug some cables that connect the LCD to the main logic board. I checked. Seemed fine.
  • Third was maybe the serial number of the cable was somehow connected to the main logic board. So I put the old cable. Still no screen.
  • Tried to connect the screen with a Thunderbolt external cable, everything worked as well but still no image on the screen.
  • Tried more than 30 seconds and 3 hours disconnected as a "reset" of the screen. No change.
  • Restarted my laptop. No change.
  • Thunderbolt Display well plugged the drive and then into the MacBook, so change the sequence of the devices. No change.
  • Information reports under "Thunderbolt" the entire chain of devices, but under "Graphics/displays" system displays only the internal screen and Cinema Display.
  • Using the newly purchased cable as a Thunderbolt external cable works fine too.

  Question

  Does anyone have suggestions on what to try next?

  The logic card goes into a sort of locked mode when you replace the cable?

  Is there more than 3 flat cables connection + connection to the land between the Panel and main Board?

  Although there is no reason to think that this has been, how to test LCD screen still work given all these flat cable connectors?

  
  

  Note: There is no Apple here store.  Apple authorized service providers are without help. He suggested to replace the cable and the Panel at a cost that is almost the same as the purchase of a new screen.

  Some of the cables that connect the LCD to the main logic board, are very short. Careful lifting the LCD, because it will go away with strength cables once that raise you it more than 2 to 3 inches on the side of the camera module.

  The shorter cable of all is the LVDS cable. A short cable with gold plated connector. Although I have had reconnected the cable on the side of the logic board, I had wrongly assumed that the other end of the cable was stayed connected because all the band used on. Someone with experience of fixing these things said of his town for this cable to unravel by force and to be sure to check both ends of the cable. When I peeled back the tape, I found that he had indeed been disconnected. Reconnect, fiddling with the tiny workspace to get the logical side of Board of Directors of what properly fixed cable again and we were back in business.

  Apple authorized service providers here in Bangkok have quoted me $200 to replace the cable. I ordered the replacement cable Thunderbolt Display off AliExpress for $12.50. It was really simple to replace the cable, just to keep an eye on this darn LVDS cable opening to the top of the screen!

• Satellite Pro 2100 two cables behind the screen

  Hi, first post so be gentle with me please.

  I have a Satellite Pro Satellite Pro 2100 and the hinges are shot, so I bought a 2100 piece to Exchange.
  Everything was ok except that I have two sons that I can't find a place to plug in. A black white and they are attached to the small square gold Ribbons that are glued to each top corner at the back of the screen. The other ends have little, but when I stripped the laptop they were in bulk and I do not see where they are going.

  However, the laptop works fine without them.
  Can anyone help please?

  All laptops with WLAN have this. WLAN antenna is placed behind the screen and these two wires must be connected to the WLAN antenna.

  If your laptop doesn't have WLAN card put just the cables aside and everything will be OK.