Back to zero in the Group of

Similar Questions

• LaserJet mfp 6040: noted 6040 laserjet back to zero after the NVRAM reset counters?

  Hello

  We had to do a reset of the NVRAM and then put the latest firmware to correct a problem

  the usuage meter reading resumed at zero

  It would be very useful if anyone knows if I can enter the readings that we have on?

  As long as you have the information, you can enter using the service menu. A diagram of the menu is attached. Here is link to find the PIN code that you will need to access the menu.

  http://www.printertechs.com/printer-troubleshooting/service-menu-PIN-codes

• Why the solitary collection does not reset back to zero every day, when I never play at vegas cumulative game and want to continue the same game.

  the old game on vista used to allow to save a game and return to saved games, but windows 8 dates back to zero every day. It's more boring

  Hello

  Please refer to the article to help out the apps and check if it helps:

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-in/Windows-8/what-troubleshoot-problems-app

  If you have third-party registry cleaners or tools of performance optimizer, you can even uninstall and check if the problem persists.

  Let us know if it helps.

• MODBUS U16 to simple, back from setting in the form

  Hello everyone, I am working with a couple inverters Kollmorgen that give and receive data via MODBUS. Using the LabView user's library, I had no problem in the reading and writing of data on their part (assuming I do not more often than 10 times per second). However, I am having some problems with the data format. Kollmorgen has not settled exactly according to the standard and therefore some values are 32-bit registers, some are 64-bit and to initiate, some are signed and some are not; they are all however, delivered in 16-bit of size segments by the function 'read record keeping. Right now I'm only interested in the 32-bit signed value variety.

  While I am able to read and I am sure I read the values I want (I can change the value of Kollmorgen workbench and LabView reflects the change of value), the output does not much sense. For positive values, it is fairly intuitive, like the first U16 (I read an array of 2 values U16) is always a zero, and the other is a x 1000 of what positive real value is. So if I read for example a current 3.5 amps, the first U16 is a zero, and the second is 3500; If I read 1.23 amperes is zero and 1230, and so on.

  However, when reading negative values, I failed to see a pattern, so that it almost always go to a pretty high value (65 324 or something) in the two registers in low as - number 2. I already tried several data manipulation of the methods listed here, including:

  -Conversion of type one in 2 U16 table, then return via join numbers

  -Convert the number in binary, binary table then back to number

  -Force in single, then using convert in I32 and divide those

  So far, no luck, anyone had a similar experience or has worked with these players in the past? Also can't find much information on the documentation of Kollmorgen and their website States that the MSB is sent as the first registry on 64-bit size records. No doubt the positive data format gives a clue, but so far no chance on guessing it.

  Convert an I32 U16 table.  Divide by 1000.

  In the opposite direction.  Take your floating point number.  Multiply by 1000.  Constrain to a U32.  Convert to an array of U16.

  

  EDIT: Don't mess with the fixed Point.  This is for very special cases, usually involving the FPGA.

• My windows Defender is set to off, when I try to change as a result, he stops and tells me to reset, I try and it always goes back to zero.

  Original title: security settings

  My windows Defender is set to off, when I try to change as a result, he stops and tells me to reset, I try and it always goes back to zero.

  How can I solve this problem

  Hello

  
  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?
  3. What is the full error you get, when you try to activate windows Defender?
  4. what anti-virus is installed on the computer?
  
  Method 1: Check if the Windows Defender service is enabled.
  a: Type Services.msc in the start search box and click on enter.
  b : now, look for a service called Windows Defender, double-click to open it.
  c: Now Start the service and make sure that it is set to automatic.
  
  Method 2: Temporarily disable the antivirus and check if the problem occurs.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  
  Note: Activate the anti-virus program after you perform this step, because it would protect your computer from threats.
  Note: If there is an antivirus installed, then it might be turn off Windows Defender, so temporarily disable the antivirus and check if the problem occurs.
  
  Hope this information helps.

• The group contacts

  Can I have some contacts in the Group?  Yes, how?

  Hey Fink,

  E-mail are what program you referring?

  If you use Outlook express or Microsoft Outlook as your e-mail client, see the link:

  How to manage groups in the address book in Windows XP

  http://support.Microsoft.com/kb/308668

  To help you better, I need detailed information on the issue. Please post back with more details.

• I can not connect to my computer laptop get "the Group Policy client service has no connection. Access denied. "

  I can not connect on my lapto even if the password is correct. I'm getting "the political group Clinet impossible service connection access Denined.

  Original title: I can not connect on my laptop even if the password is correct

  HI, John Angelo2,.

  Try rebooting and tapping F10 to achieve the recovery screen

  You can choose to repair or restore your system

  Select Restore to an earlier time

  If it is impossible to do the above, use the installation start screen repair DVD

  This problem is caused by your user profile/registry settings/system files corruption

  Response of Mouneshawar R.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-Group-Policy-client-service-failed-the-logon/6b069a74-8524-442c-8ff1-d723e2a4e992

  Re-create the profile or restore the file ntuser.dat from the back to the top

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/c88515b4-4be7-4f6f-9988-80f8a5683b41/

  You can post on the Technet forum for help

  How to customize the default local user profile when you prepare an image of Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/973289

  Assign a mandatory user profile

  http://TechNet.Microsoft.com/en-us/library/cc786301 (WS.10) .aspx

  http://support.Microsoft.com/kb/307800

  http://msdn.Microsoft.com/en-us/library/bb776895 (v = vs. 85) .aspx

• Cannot connect administrator account. Error - the Group Policy Client service has no logon. Access is denied

  Original title - MESSAGE of ERROR

  Hello

  I am runnung Windows Vista on my laptop Toshiba A200. As of a few days ago, asking that I try to open a session (I'm the admin), I get an error message saying "the Group Policy Client service does not log. Access is denied. »

  I managed to get in the "back door" through my wife and did a system full scan with Norton and Spybot and neither found anything unusual. He asked me to change my user account settings, but of course, because my wife is not the admin, he won't let my do changes.

  In addition, some of my software, such as Final draft, also seem to have vaporized.

  Help!

  Thanks in advance,

  Steve Hayward

  Hi stevehayward

   

  1. is the computer on a domain?
  2. during how long have you had this problem?

   

  If the computer is not connected to the domain, you can start in safe mode, and then try to perform a system restore.
  Step 1 :
  In safe mode; you have access to only the drivers and base files. Check out the link to start the computer in safe mode and then check-
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2:
  You can perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.

  Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To do this, there must be a restore point from the system in which the connection was successful.

  Please refer to the below of the help links on performing a system restore.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  I hope this helps.

• Only the groups showing them in App Contacts

  I have recentlly had to restore my phone to an earlier backup. However, now when I go to Contacts, I don't see that local groups.

  When I go on my account gmail on a desktop browser, I see all my contacts and my groups that I made. If the groups still exist.

  But on my phone, when I open the Contacts, I see all my contacts, I see my favorites, but when I click on groups, it only shows me that local groups, not the groups that exist on my gmails account.

  Anyone encounter this problem? Someone at - it solution.

  If I make a new group of gmail on my phone, it will appear in the tab group on my contact phone app and I see this group when I run the gmail application on my computer browser.

  But if I make a new group via the computer's browser and gmail, it will not be displayed on my phone in the Group tab.

  I hope that makes sense.

  I have xperia z5, Android version 5.1.1

  (FYI, I upgraded to the Marshmallow, but had the error "Cannot run PlayStore". That's why I backed up and restored. A lot of headaches later, I restored to highest back. Added all my applications one by one. Painful, but not a big deal. But... this thing contact is bugging me. I use groups a lot and I don't want to have to recreate all typing them on my phone.

  @sweetboulay

  Have you checked the contacts > menu > filter?

• Windows 7 Edition home premium error "Windows cannot connect to the Group Policy client service."

  Original title: guest for Windows 7 Home Premium account

  Hi all

  I would like to aid which has had to face the problem below and how it was fixed.

  I have Window 7 Edition home premium and created a guest account with normal privileges that is turned on but cannot access with the error "Windows could not connect to the Group Policy client service" I think that the main problem is related to a policy because when put on the account to administer it in pop, error message says 'Cannot connect to a windows service' Please check group policy log.

  Thank you very much in advance

  Hello

  Thank you for your time and effort to get back to us, and I apologize for the delay in responding.

  Method 1 step number d makes reference to the present Details tab on the event viewer, where you can get the details of the error. First, search for the error which will be something like Windows cannot process extension Client Strategy Group-side and click on the error and then click the Details tab and make a note of the GUID (Globally Unique Identifier) for the extension defective client-side. For reference, see the screenshot:

  

  Now come to step f number , it indicates the location of the Group Policy Extensions so that you can check if the extensions shown in the case log and the Registry Editor extension have a difference. The path of the GPExtension is HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\GPExtensions. For reference, see the screenshot:

  

  Let us know if the steps are clear to understand now. If this isn't the case, we will be happy to help you further.

  Thank you.

• In the Group Policy Editor, how to remove link purple (clicked)?

  In the Group Policy Editor, I clicked on the links. The links are 'policy setting' and 'properties' (as shown in the screenshots). The links turned purple after I clicked on them. It shows not only on the specific links I clicked on. It shows on all the links that have a 'properties' or link "policy setting. Before they were blue. Does anyone know how to restore them back to blue? I tried Group Policy link purple', "how to remove purple link in Group Policy" and expressions similar but have found no relevant results.

  

  Hello

  Please contact Microsoft Community.

  Unfortunately we do not have an option to change the color from purple to blue. Please see the link below for understanding the Group Policy Feature Set

  https://msdn.Microsoft.com/en-us/library/bb742376.aspx

  Hope this information is useful.

• Reassign the group identity of endpoint massively in ISE

  I imported a large number of endpoint identities and unfortunately some of them have not been properly identified and I assigned the profile of bad endpoint. End points, I need to move on to another group that all share a common YES. Is it possible to move them at the same time? I can't find a way to do this.

  My apologies to Tom, I rushed through the steps and was referring to the export of endpoint option. You will need to check one by one. But if you have the first csv file you generated, I filter the mac addresses of those and enter them back with the group that you want to that they in.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• How can I change the groups of people app

  1 group do not appear on my app people

  2 when I get back to managing people and groups selected app it gives me the possibility to delete old groups or add new

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  We look at this; It seems there is no option to edit groups of people app. You can check the link for the people app.
  People soft for Windows: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-8/people-FAQ

  I hope the information helps solve this problem. If you need assistance, please feel free to post. We are here to help you.

• Unable to connect to the Group Policy Client service

  So I know there is a lot of info on how to solve this problem, but it CONTINUES to SE. As I'll fix it then after that I closed once or twice going to do EXACTLY the same thing, it gives you the screen with Windows can't connect to the Group Policy Client service. I have windows Pro 8.1 and I never had this problem before. If you guys know how permanently repair this them please say so. I don't like going back trying to set every time. And he started after only a day and then he kept doing the same screen. It would be very useful if you could respond ASAP.

  Hello

  Thank you for the update on this issue.

  From now on, I recommend you to go through the following methods:

  Method 1:

   

  I suggest you perform the SFC scan and check if that helps. The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  After the SFC scan, run Windows Update.

  Method 2:

  Make sure that all Windows updates are installed on your computer as the issue may occur because of some missing updates for Windows components.

  Please follow the steps to install the available Windows updates.

  1. Press Windows + C, type Windows Update in the start search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates. If you are prompted, restart your computer.

  If the problem persists, please answer us with the details of the issue and messages.

  Hope this information is useful. Please let us know the results to get help.

• Trying to get ending entry into force for the groups of lines

  Hello world
  
  I searched the forums, but I can't find a post that is a problem quite like that.
  
  I have some data that looks like this:
  

          ID_NUM     EFFECTIVE ALLOC_PERCENT   ACCT
  ---------- --------- -------------   ----
         101 01-JUL-11            21   A1
         101 01-JUL-11            72   A2
         101 01-JUL-11             7   A3
  
         101 01-JUL-12            20   B1
         101 01-JUL-12            80   B2
  
         101 01-JAN-13            20   A1
         101 01-JAN-13            20   A2
         101 01-JAN-13            50   A3
         101 01-JAN-13            10   B1
  
         101 01-JUN-13            50   A1
         101 01-JUN-13            50   A2

  (note: I inserted manually empty lines for clarity)
  
  Here's the logic: the lines represent an assignment of percentage on the account for the identification number specified for this entry into force. A new date to cancel the previous, and if any line in the conceptual group is replaced, so they are all.
  
  I'll try to find the date when the effective period of each group ended and which includes in the game so that I can calculate then the number of days in a given line has been effective; something like that;
  

    ID_NUM     EFFECTIVE END_DATE   ALLOC_PERCENT ACCT
  ---------- --------- ---------- ------------- ----
         101 01-JUL-11 01-JUL-12             21 A1
         101 01-JUL-11 01-JUL-12             72 A2
         101 01-JUL-11 01-JUL-12              7 A3
  
         101 01-JUL-12 01-JAN-13             20 B1
         101 01-JUL-12 01-JAN-13             80 B2
  
         101 01-JAN-13 01-JUN-13             20 A1
         101 01-JAN-13 01-JUN-13             20 A2
         101 01-JAN-13 01-JUN-13             50 A3
         101 01-JAN-13 01-JUN-13             10 B1
  
         101 01-JUN-13 <null>                50 A1
         101 01-JUN-13 <null>                50 A2

  The end_date of the group is the EFFECTIVE_DATE of the next group (ordered by ID_NUM, EFFECTIVE_DATE).
  
  End_date of two rows is zero because there is no group of lines with an effective date the later - in my process, I'll NVL which sysdate so that my calculations of days will be valid.
  
  I tried some analytical queries with LEAD, but I couldn't figure out how to get the next date of the efficient group. I could get the entry into force of the next row, but not the next group. I couldn't specify how many lead lines to look forward, because there is not a number of rows in each group.
  
  How to fill the end_date column?
  
  Here's the code to create the above.
  

  create table t
  (id_num number,
   effective_date date,
   alloc_percent number,
   acct_code varchar2(4)
   );
  
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jul-2011',21.0,'A1');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jul-2011',72.0,'A2'); 
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jul-2011',7.0,'A3');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jul-2012',20.0,'B1');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jul-2012',80.0,'B2');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jan-2013',20.0,'A1');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jan-2013',20.0,'A2');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jan-2013',50.0,'A3');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jan-2013',10.0,'B1');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jun-2013',50.0,'A1');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jun-2013',50.0,'A2');
  
  commit;
  
  select * from t;

  Oracle version information:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  PL/SQL Release 11.2.0.3.0 - Production
  "CORE 11.2.0.3.0 Production."
  AMT for Solaris: 11.2.0.3.0 - Production Version
  NLSRTL Version 11.2.0.3.0 - Production
  
  
  Thank you very much

  Hello

  Here is one more way to do using lead work.

  WITH ds as (id_num, effective_Date, lead (effective_date) select on end_date (id_num order, effective_Date))

  t

  Id_num group, effective_date)

  Select t.*, ds.end_date

  DS, t

  where t.effective_Date = ds.effective_Date;