LaserJet mfp 6040: noted 6040 laserjet back to zero after the NVRAM reset counters?

Similar Questions

• LaserJet M1217nfw MFP: HP laserjet printer stop printing after the change of internet provider - solution: Reinstall...

  Hello

  my all-in-one HP laserjet has worked on my computer laptop windows 7, via a wifi connection, in the past;

  internet provider has recently changed, and since then, I can't install the printer so that it works continuously.

  After installation initial (via cable between laptop and printer), everything seems fine;

  I select "share with everyone".

  = > everything OK, everything prints, for two users.

  Problem:

  The next time myself or another user trying to print, just a few days later - nothing works anymore.

  NO error message;

  use of the printer is visible in the queue;

  printer is visible (and selected as the default printer) in "devices and printers" with a green check mark, but in light grey, as if idle.

  When (right) by clicking on "help", no error is found... but nothing prints, always.

  How can I avoid to do the reinstall whenever I want to print from my laptop?

  (Printing from my Tablet works great!)

  Would be very grateful for your help... Thanks in advance!

  Hi @KatLe ,

  I see that you have problems printing to different user accounts. I will definitely do my best to help you.

  I have provided a document for the definition of security permissions for printing to see if this will help.

  Can the administrator account on the computer printing, or were they also intermittent problems?

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you need help, let me know.

  Good day!
  Thank you.

• my computer guard reboot changes back several times after the installation of Service pack 2 on Vista.

  I tried to update my computer (Dell, Vista Home premium) with service pack 2 for Vista.
  But after completing the installation, there was an error when I tried to restart to complete update and work stoppage.
  So I restarted the computer and, instead of log on screen, the message [service pack was not installed recovery changes do not turn off your computer] appeared
  and then restart automatically.

  Now it's repeating this cycle for a day!... .the message - > restart-> message-> restart...
  What should I do? I can still start windows safe mode. (the same message...)
  I have lots of important files it contains so really want to reinstall Vista.
  Please help me...

  Hi arkitekromero,

  Given that repair options did not work for you.  I suggest you try the method below.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. Rename the Pending.xml file, and then change the registry notes read the following important notes before you use this troubleshooting method. Use this method to resolve the symptom of restart that is described in the "Symptoms" section, so that you can back up data before you reinstall Windows. You must use this method of troubleshooting only if you plan to back up data and reinstall Windows. Use this method only after trying other methods. Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer for instructions on how to continue. Use this method only if the computer has no restore points or if you cannot start your computer to a point where the system restore feature is available. After using this method, the following conditions may exist until reinstalling Windows: An update is being installed may not be installed correctly. Windows Update may not work correctly. If an update is installed, you may be unable to stop the installation process. You may be unable to enable and disable certain Windows functions in option. Certain optional Windows features may not work correctly. The computer may be in an unprotected state. To rename the Pending.xml file, and edit the registry, follow these steps. Start Windows Vista and go to system recovery options: Insert the Windows Vista installation disc in the disc drive, and then restart the computer. When you are prompted to restart from the disc, press any key. When you are prompted, configure the language to install, time and currency formatsand keyboard or input method options that you want, and then click Next. On the Install Windows page, click repair your computer. In the System Recovery Options page, click the version of the Windows Vista operating system that you want to repair, and then click Next. Use the system recovery options to rename the Pending.xml file and modify the registry:

  1. In the System Recovery Options page, click command prompt.
  2. Type cd C:\windows\winsxs, and then press ENTER.
  3. Type ren pending.xml pending.old, and then press ENTER.
  4. Type regedit and press ENTER.
  5. Select HKEY_LOCAL_MACHINE.
  6. On the file menu, click load the hive.
  7. Look for the following folder:
     C:\windows\system32\config\components
  8. When you are prompted for a name, type Offline_Components.
  9. In the registry editor, find and delete the following registry subkey:
     HLKM\Offline Components\AdvancedInstallersNeedResolving
     HKLM\Offline Components\PendingXmlIdentifier

  Exit the registry editor:

  1. At the command prompt, type exit to quit the registry editor.
  2. Press ENTER.
  3. Click restart.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Insert my backed up data after the system has been restored.

  I have a four-year-old desktop HP Pavilion p6226f and am on Windows 7. A few days ago I had to restore my PC to factory conditions. I backed up my data files through the process in the Recovery Manager, on 3 DVDs.

  Is there a utility on my computer that manages the process of insertion of my files on my computer?

  Thank you in advance for your help!

  Update, December 30, 2013:

  Although Jaco has been more than helpful with this issue (read the thread for lots of great ideas and he provided information), I marked by error this issue having been resolved while he was not. I don't know how United Nations brand it, if I add this note.

  I thought, when I got the link to get instructions from HP, I got everything that I had to this summary. That was not the case. So, my apologies. I shouldn't be marked as resolved until what I had followed the process to the end. I'm still stuck in the same exact spot.

  Hello

  Sorry for the inconvenience, but please, use this link. The previous link was for Windows Vista. This link is for Win 7.

  You are the very welcome.

  Happy computing!

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo" If the notice is relevant or "Accept as Solution" If your problem has been resolved.

  +++++++++++++++++++++++++++++++++++++++++++++++++++++
  H8 1380 t CTO, Intel i7 3820
  16 GB OF DDR3 MEMORY
  Pegatron Motherboard-IPIWB-PB (Pittsburgh), Radeon HD 7570 1 GB. Win 7 Home Premium set to upgrade to Windows Pro 8.1.

  Want Phoenix 810-150se, Intel i7 4820 k
  12 GB OF DDR3 MEMORY
  Pittsburgh2 motherboard, NVIDIA GTX 645 - 2 GB GDDR5. Win Pro 8.1.

  HP 560z CTO AMD processor / chipset.
  16 GB OF DDR3 MEMORY.
  Radeon HD 6570
  Win 7 Home Premium set to upgrade to Windows 7 Pro.

  HP ENVY 17 t-j000 CTO Quad Edition laptop. Win Pro 8.0

• NO ARROW BROWSER BACK TO BACK TO LEAVE AFTER THE APPLICATION OF DISCONNECTION

  Good afternoon
  
  I developed a small application and the need to know how to avoid or define who does not go to the previous page or go back into the browser (* <-*), after leaving the application by disconnecting?
  
  
  I appreciate your attention and collaboration in
  Good afternoon...
  
  REYNEL Salazar Martinez
  Colombia.

  Hello Rey - Sal,

  This forum is dedicated for the beta of Oracle Database 11 g XE. Although the APEX is included in this version of the database and people here might be interested in helping you, I guess you will get the best help in the forum dedicated to APEX and suggest you post your question once again it: {forum: id = 137}

  -Udo

  Published by: Udo on 27.04.2011 00:57

  PS: I assume that this question has been answered here before. You can also try to search the APEX forum before posting it.

• How can I turn it back on XP after the physical conversion to hyper-v

  I've used disk2vhd utility to convert an XP machine a .vhd.  I rode to a new virtual machine.  It starts fine, but when I did, he invites me to activate the copy of Windows.

  Two problems.  First, the device drivers have apparently not been installed, as well as the network does not work yet.  Activation over the internet is not possible.

  If I choose telephone activation, the automated system tells me that the code is not a valid MS product.  Yet, there is a sticker of genuine produuct on the side of the box from Dell.

  My only option is to stop right there.  Any suggestions?

  Have you actually tried Telephpone activation? -l'option is buit in XP

  However, as I said, it is useless if you do not have a valid license in the first place.

  If you * do * have a license valid, then try this...

  You might be able to solve your immediate problem of the 30-day activation grace period has expired by resetting it. Follow these steps:

  1. If the computer can be started in a safe mode command prompt, do.

  2. at the command prompt, type this command exactly (space, caps and comma are required):

  Rundll32.exe syssetup, SetupOobeBnk

  3. restart.

  If you did it, your activation grace period will have been reset, giving you more time to work on the problem.

• Back to zero in the Group of

  Hello
  
  I have table, say commands, such as
  
  CREATE TABLE ORDERS ("CUST_ID" NUMBER (10), "ORDER_ID")
  NUMBER (10), DATE OF THE "ORDER_DATE")
  
  I would like a list of CUST_ID with the number of orders placed in a given time interval, so I have a
  
  SELECT DISTINCT CUST_ID, COUNT (*) AS ORDER_COUNT
  Orders
  WHERE the ORDER_DATE BETWEEN < date1 > and < date2 >
  
  I have the list as
  
  CUST_ID ORDER_COUNT
  ----------------------------------
  1 27
  2 15
  2 t2
  
  
  and so on. Cust_id 3 is not present, because it has not ordered in the meantime.
  
  I would like to have:
  
  CUST_ID ORDER_COUNT
  ----------------------------------
  1 27
  2 15
  *3                0*
  2 t2
  
  How can I do?
  
  Thank you

  select c.cust_id, count(o.order_id)
  from   customers c
  ,     (select * from orders where order_date between :startdate and :enddate) o
  where  c.cust_id = o.cust_id (+)
  group by c.cust_id
  

• LaserJet pro 200: location of the country of my printer was incorrect

  Just installed this printer.  When he asked the countries that I said OK to the New Zealand instead of the Canada.  Now, she wants to do it all in A4.  How can I fix it?

  Hi Michael,

  I admit it - I had to laugh, but I certainly don't think you are a fool.  I know that some products are not perhaps too clearly labelled.

  For the LaserJet Pro 200 Color MFP M276nw, to solve the problem of the country, you can do a cold reboot.  Please note that when you do so, the information and parameters are reset:

  ●Tous menu settings are reset to the factory default values.

  All location settings, such as language and national and regional, are reset.

  ATTENTION: All integrated network settings are also reset. Don't forget to print a Setup page before you run the rest. Make a note of the IP address that is listed on the Jetdirect configuration page. You may need to restore the IP address after an initialization/reset NVRAM. After performing a reset/initialize NVRAM, reconfigure all computers that print to this product.

  Here are the steps:

  1. turn off the product.

  2 press and hold the lower left corner of the screen when you start the printer. There is a secret place on the screen which will trigger the cold reset process.  The spot is where the progress bar starts when the machine starts.

  When the product has completed the NVRAM initialization, it returns to the ready state.

  With regard to double-sided printing, here are the instructions for the M276nw.  The instructions are similar to another product - it must still move the paper.

• Lost HP LaserJet 1100 disc lost for the printer and the need to re - install urgent! the printer

  I have a HP LaserJet printer and have lost the disc. I need to reinstall the printer so I can print the document again and I also tried the installation procedure. Help

  Hello

  You can download the software here...

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=UK&prodNameId=14925&prodTypeId=18972&prodSeriesId=25470&swLang=8&TaskID=135&swEnvOID=228

  Tricky

• HP LaserJet MP604: HP LaserJet MP604 do not print the PCL NET files

  Hello.

  New HP LaserJet MP604 printer does not display files PCL through a network, sent directly from PC.

  It print file correctly to the Web Interface (upoload PCL file https://10.17.200.112/hp/device/Print/Index), , but not network.

  I don't have these problems with the previous model HP LaserJet M602, it print properly the network file.

  Also when I print from MS Word, I see, what format of file (from to C:\Windows\System32\spool\PRINTERS printer spool) changes SPL, before (for printer M602 files are plain text with PJL and PCL commands), but for printer files as zip/xml MP604.

  What can I do to change the settings for HP LaserJet MP604 so that he began to support PCL printing directly from the net?

  And what I have to change to see PCL/PJL commands coil?

  >>... If the file contains only plain ASCII text nothing prints and no error message...

  So maybe the definition of the '\\msk-ent01.ru.ori.local\intop1lj' target is incorrect?

  I remember vaguely when using "copy" at a command prompt session Windows, the target must be a Windows share name, preferably the one corresponding to the final part of the name of 8 characters or less.

• Cannot get 100 colorMFP LaserJet M175nw printer mode 'sleep'. the LCD stays on?

  　

  I have a printer HP LaserJet M175nw colorMFP 100.  the printer is hard plugged into a local home network and is accessible through a static ip address, the family is using windows xp. I tried to get the printer mode 'sleep'. I went into the setup of the printer lcd menu and set the printer mode standby after 15 minutes. However, I don't think it's ever enter mode 'sleep'. a green light stays on and the lcd screen stays on also. is this a normal behavior?

  　

  Thank you

  w

  webster22, is this printer connected on a wall or on a surge protector?

  If you have gone through the Setup Menu the Setup Menu under 'Energy settings' and the system chosen for the Sleep Delay option, then you have successfully configured the printer for its energy conservation mode.

  I find not specific, it is possible that the screen can stay in this mode, however most of the time the power off screen is a feature of mode 'sleep'. With the screen being on this subject is still possible it's save energy by stopping all other drains power.

  You can also check the firmware of the printer via the link below to make sure it is up-to-date.

  http://goo.GL/2v9ip

  I hope this helps!

• HP Laserjet 500 colorMFP M570d: printer HP Laserjet 500 colorMFP M570dn reflecting the situation of "on paper", but the paper is present.

  HP Laserjet 500 colorMFP M570dn reflecting the situation of "on paper", but the paper is present. Effects of several operating system platforms; 10, 7, 8.1, 2012 R2 server.

  We have this printer is installed on a server for printing on 2012 R2 server configuration. Everything works fine until today. The status on the side of things, regardless of the OS, OS shows the printer status is "on paper". Paper has been confirmed in the printer, cleaned rollers, test pages, copy made, etc. When you submit a print job, the State remains the same, just, the job is in the queue and does nothing.

  Any help would be appreciated.

  CRI_IT_guy

  When the software indicates out of paper, it's really tell you he lost communication with the printer. It could be a server problem.  To test since you already know that the printer works would print a printer configuration page and using the printer ip address set up on top of one of the computers as a local tcp/ip printer without going through the server, so the computer prints directly to the printer.  If it works, then your issue is network or linked servers.  Make sure that the address of the printer has not changed and also make sure that the spooler is running on the server.

• LaserJet 3050 stopped printing after last update 1st OCT 14

  LaserJet 3050 stopped printing after last update 1st OCT 14.

  Work status displays "Printing" but watch then "Waiting for printer to become available" and prints ever.

  Tried the usual power out voltage/power on both computers & printer.

  iMac with OS 10.9.5

  Thanks for any help.

  Darrell

  P.S. This thread has been moved to printers - LaserJet Macintosh compatible products. Forum Moderator - HP

  Printer started working today.

  I deleted my printers HP3050, removed cable printer, stop computer and printer.

  restarted printer and computer, reinstalled cable and now the printer works normally.

• I have two printers. One of them: hp Laserjet P1505n just stop printing. the other is fine. Windows 7. Please notify

  I have two printers. One of them: hp Laserjet P1505n just stop printing. the other is fine. Windows 7. Please notify. Thank you.

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• LaserJet 3020 (also known as the Prod. N ° Q2665A) - where is the scanning software?

  Hello

  I have a LaserJet 3020 (also known as the Prod. N ° Q2665A), with which I would like to scan, when you use a machine Windows 8.1 (64-bit).

  When I go to the HP support page, any downloadable software seems to be on the digitization, it is all about hologram.

  Am I missing something?  Can scan you with the software available on this HP support page?

  Here is a link to the support page to which I refer:

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdHome/?sp4ts.Oid=378054&spf_p...

  Thank you!

  Hi JTK,.

  The LaserJet 3020 uses scanning software is integrated in Windows 8. I guess the same is true for win 8.1. This page describes how to analyze with the scanning of Windows software:

  Use the software in Windows 8 to analyze

  I hope this helps.