Backflip: No data via 3G or Wifi

Similar Questions

• How to make my computer send all audio data via an optical audio cable instead of making headphones?

  Howdy,

  To listen to the radio online or CD played from my computer, I used to connect the computer to my entertainment system at home since the headphone jack of the computer to the port on my home entertainment system.

  Now, I wanted to get a better sound and bought the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the system entertainmeny home via digital cable optical, rather than by the headphone. If I just disconnect the cable between the headphone and the port to THE and have only the PC and the system connected with the optical audio cable, I can't hear any sound. I suspect that the computer is not sending the data through the optical audio port. I'm not able to figure out how I can adjust the settings on my computer so that, from now on, all sounds are emitted through the optical audio.

  (1) I want to do it especially for my desktop HP (configuration below) and advice on how to do this would be appreciated.

  (2) I also have a HP laptop (configuration below) and I was wondering if this would be feasible too (even if she does not have an audio output, but it has an HDMI output - you can convert audio optical?)

  Thanks in advance!

  My office is:

  WANT to h8xt,
  • Windows 8 64
  • 3rd generation Intel (r) Core processor quad-core i7-3770 [3.4 GHz, 8 MB of shared cache]
  • 12GB DDR3 1333 MHz SDRAM [3 DIMMS]
  • 1 TB 7200 RPM SATA hard drive
  • No secondary hard drive
  • 1 GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
  • 300W power supply
  • DVD SuperMulti burner
  • LAN wireless-N (1 x 1) card
  • 15-in-1 reader cards, 2 USB 2.0 (front), 2 USB 3.0 (top)
  • No additional desktop software
  • No additional security software
  • No TV Tuner
  • Beats Audio (tm) - a built-in studio quality sound
  • HP USB volume control keyboard and mouse with Win 8 keyboard
  • Adobe Premiere Elements and Photoshop Elements 10

  And the laptop:

  HP ENVY 15t Quad

  Hello @_goma,.

  Welcome to the HP Forums, I hope you enjoy your experience!

  I read your post about how you want to send all the audio data via an optical audio cable instead of the headphone jack of your computer, and I'd be happy to help you in this case!

  To configure your desktop computer to activate the optical audio cable, I advise you to follow the steps below:

  Step 1. Click on the button of the Windows key on your desktop

  Step 2. Type "Control Panel."

  Step 3. Select "Control Panel" in the upper right corner

  Step 4. Select sound

  Step 5. On the Read tab, right click on the white box under available devices

  Step 6. Select "Show disabled" and "show disconnected devices".

  Step 7. Connect your Audio optical cable

  Step 8. Select your cable Audio perspective as the default device, and click 'enable '.

  Because it is not possible to convert the audio output HDMI output on your laptop, it is regrettable that the laptop is not able to connect with an optical audio cable.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• Transmission of data via the Ad Hoc network in LabVIEW

  Hello

  I'm trying to transmit some data (position, speed, etc.) a laptop computer to a host computer.

  The laptop and desktop have the card installed wireless so I thought this would be a good

  the idea of transmitting data via Wi - Fi using TCP.

  However, the problem is that there is no router/modem in the area where the laptop is sitting

  so, I create a network of Ad-hoc (computer to computer) between the laptop and the desktop computer.

  Then, I use "ipconfig/all" in the Windows command prompt to extract the IP as follows.

  IP address wireless laptop: 169.254.165.72

  IP address Wireless Desktop: 169.254.102.126

  Desktop Ethernet IP address: 129.94.229.230

  I then use the code example in the TCP library named 'Data Server.vi' and "Data Client.vi."

  I listen on port 6340 times the wireless and ethernet desktop on the side map server.

  And on the side of the customer, I opened a connection to port 6340 169.254.102.126 IP address.

  However, the connection cannot be granted. Anyone know why this is the case?

  Note: I have disabled all firewalls.

  Interesting, when 2 computers are connected to the same modem, their IP addresses

  differ only by the last number (e.g. XXX.XXX. XXX.123 vs XXX.XXX. XXX.256), but when an ad

  the House of Commons network is established, their IP addresses have 2 numbers that are different. (XXX.XXX.

  102,126 vs XXX. XXX.165.72) I wonder if this has nothing to do with the failure.

  Thanks for all your help.

  Ron Liou

  I somehow this job.

  What I've done

  -Once again set up an Ad hoc network for the labtop and Office

  -verification of the IP address is always the same

  > Portable wireless IP address: 169.254.165.72

  > Portable wireless subnet mask: 255.255.0.0

  > Wireless Office IP address: 169.254.102.126

  > Wireless Office subnet mask: 255.255.0.0

  -switch on the ICS of the ethernet on the desktop card

  (This resulted in an IP different addresses assigned beng)

  > Portable wireless IP address: 192.168.137.21

  > Portable wireless Subnet Mask: 255.255.255.0

  > Wireless Office IP address: 192.168.137.1

  > Office Wireless Subnet Mask: 255.255.255.0

  Now I use the ip address of office (192.168.137.1) to open the connection

  and it works! ??

  I am very pleased with the fact that it works but I would like to have one

  explanation on why it takes an ICS.

  Thank you!

• My iMac does not detect my C309g-m as a scanner via bluetooth or wifi.

  Somewhere between Snow Leopard and 10.7.3, my iMac stopped detecting my C309g-m as a scanner with bluetooth and wifi.  I can still print via bluetooth and wifi without problem, but "print and Scan", "Image Capture", and "Preview" not to recognize the C309 as a scanner.

  I uninstalled the HP Photo Center, but didn't know that there was a 'scrubber' option until after the forums up. Accordingly, I still have the package installed driver somewhere in the interiors of my computer.  It is a 3.3.3 package by car.

  Any help will be greatly appreciated!

  Hello

  As the software was partially removed, please follow the steps below to ensure that pilots are not damaged:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete.

  Then, download and install the latest HP Printer Drivers 2.8 below package:

  http://support.Apple.com/downloads/DL907/en_US/HPPrinterDrivers2.8.dmg

  Finally, reset the printing system and reconfigure the printer:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now, click on the Plus sign and select the pritner listed as Hello in the default tab.

  Now, check if you can scan using Print & Scan or one of the other methods described below:

  http://support.HP.com/us-en/document/c01910186

  It is not supported to scan from the front panel of the printer without a full feature software, so it's expected.

  About Webscan EWS option, the page overview only scanning, in order to save the page scanned, you should right click (CTRL + left click Mac keyboard), then save the file in the contect menu.

  Please let me know any changes during the scan to Print & Scan after installing the package.

  Kind regards

  Shlomi

• How to send data via TCP

  Hi all

  I am trying to write a very simple application that will transfer data via TCP to another computer running a TCP server. (About 3K of data)

  Although I followed the code example in the 4.6 Java Development Guide, page 101, on the use of the socket connections, (http://na.blackberry.com/eng/deliverables/3802/development.pdf) I've been running into questions that data transfer crashes after an undetermined number of bytes.

  Someone at - it sample code to open a TCP connection and sending the data? This seems to be a very common thing to do, so I don't know what is my problem.

  Thank you
  Daniel

  I'm not going to answer your first question, I think that we must resolve this problem before you watch something else (and I suspect they are all related).

  I would almost guarantee that you run your socket send and receive on the thread of events.  The thread of events, that's what treats your interaction Menu, trackball movement etc.  If you perform a long running or blocking on this Thread, your device will freeze.

  Look at the demo of Socket and move your network of transformation to a Thread separate, as does the sample.

  To confirm that the treatment of your socket is executed on the event Thread, you can add this code, run it in the Simulator and watch it in the output window of the debugger and set a breakpoint on the line to System.out.

  If {(Application.getApplication (), isEventThread ())}

  System.out.println ("running in the thread of events and should not be");

  }

• BlackBerry smartphones, I am able to update the Date and time on WiFi?

  With a 9800 smartphone (3g, WiFi) 6.0 Bundle 278 (v6.0.0.141, platform 6.4.0.64)

  I'm running a few tests with my camera and I took out my Sim Card. I would like to know if I can update the Date and time on WiFi only?

  Note, I am able to navigate successfully.

  No, you can't do a simple navigation with wifi only

  Update on time is made by the carrier or by the RIM servers. No SIM means no access to these data.

• data via sql dev store

  Hello
  I've given cluster and can store files and it is clustering ID in the new database using the ODM. I group these data via SQL dev. Oracle again but I'm not for any folder for the storage of cluster ID. How do I? can I put something in response or detail node?

  Hi Nasiri,
  In your description, you have only the Cluster node as entry in the node to apply it. You should also connect a node type of source of data as well. Just to get this to work, why not connect the source of input data to your Cluster node to the node to apply it. If the node to apply it should have 2 inputs, a node of type of data source, but also a model node.
  Thank you, Mark

• How to rename a data via command store during automatic installation

  Hi, the automatic installation of my servers esx and post script exec I wan't to rename the local data store to esx 3.5. I tried to find a solution here in communities and also tried the following commands

  • vimsh - n e "datastore/hostsvc / / rename oldname newname.

  • VMware-vim-cmd hostsvc/datastore/rename oldname newname.

  but nothing happens when I use these commands and I get no error message.

  Anyone know what I am doing wrong and how can I rename local warehouses of data via command line?

  Thankx

  Frank

  We have a set of post scripts that are executed after the first reboot after the construction, by default the local data store must be named storage1

  You can do the following:

  ln -sf $(readlink -f /vmfs/volumes/storage1)  /vmfs/volumes/$(hostname -s)-local-storage
  

  or of any naming convention you want

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

• Phone to download a lot of data via WiFi only when the charger is plugged - iPhone iOS 9.3.1 6s

  Hello

  Just today, I noticed that my iPhone 6s was download continuously at the speed of the network via WiFi only when is plugged in the wall charger or the USB loader on the computer. As soon as I stop charging the phone, the download stops. I have no idea what download and I'm a little frustrated because my connection high speed/wireless home is capped.

  Sync to iTunes on WiFi and iCloud backups are disabled. I had subscribed to 9.3.2 iOS beta on the registration by registering with my Apple ID last week, but I haven't added the certificate so that it can download OTA or via iTunes. I have no update available on my Apple store as well.

  I noticed the slowdown on my cause of internet connection of desktop computers that my phone of summer download something on wifi while he is in charge and I also saw the use of the network by using "System Monitor" app on the App store.

  Kindly help me to solve this problem.

  Thank you

  I did a factory reset on by phone by "Erase all content and data" and chose to set up as a "new iPhone" after reset done. There are now only apple applications on the phone, I connected to wifi with the charger plugged and the problem persists. I wonder if it was to be an apple iOS update, I am on iOS 9.3.1 and 9.3.2 is still in beta, I'm not sure if there is an apple update going on in the background.

  Kindly help.

• 320N crashes when you try to transfer data via wifi

  I have the 320N and I am very frusterated.  I would just take it, but I bought it new on Amazon.com, which means I have to pay shipping because I threw away the box and the return shipping of RMA form!  I don't even know if Amazon bring it back without this paperwork, but still the question...

  I have not yet all maps N, but I upgraded to this router because my home internet service is faster than what my old WRT - 54 g could deliver.  This new router performs routing and I can now achieve the nominal speed from my ISP (50 / 10 Mbit/s).

  Can I transfer large files 6 + GB WIRED between one of the LAN ports on this device.  However if I try to transfer more data on wifi, the router simply will stop.  The lights on the front work well, they Flash as there is activity and power light is solid, but it will not pass traffic and SSID wifi disappears.  I run a continuous ping to the router (192.168.1.1, ping - t) and I get<1ms replies.=""  on="" my="" laptop="" i="" initiate="" a="" download="" of="" a="" 1gb="" file="" which="" is="" shared="" in="" my="" windows="" 7="" homegroup.=""  within="" a="" minute="" or="" two="" the="" constant="" ping="" to="" the="" router="" starts="" timing="" out.=""  internet="" access="" to="" anything="" (wired="" or="" wireless)="" instantly="" ceases.=""  new="" introduced="" devices="" will="" not="" grab="" a="" dhcp="" address.=""  existing="" pc's="" whom="" already="" have="" their="" dhcp="" address="" can="" talk="" to="" each="" other="" only="" if="" wired.=""  the="" wireless="" transmitter="" stops="" broadcasting="" the="" network="" and="" devices="" no="" longer="" see="" it="" on="" the="" airwaves.=""  the="" only="" way="" to="" fix="" it="" is="" to="" power="" cycle="">

  It doesn't even have to be a large file via wifi to transfer.  Earlier as I type this post that I noticed the constant ping my other monitor started timing.  I have pedaled power the router in time for me to run for this position.  In fact I had to do it three times in the time it took me to write this post.  It's the most frustrating experience I had with a wifi router/ap, and I play with Cisco equipment at work running IOS real.

  Here's what I've tried so far.

  Reset the default settings by pressing the rear reset for more than 30 seconds button.

  I can confirm this resets the default values as password and all the other settings are default return.

  I tried WPA2 Personal.  I tried WPA.  Router blocks always.

  I tried with all the default settings.  Router blocks always.

  I have reset the router repeatedly.  Always freezes.

  Power cycle it for more than a minute.  Always freezes.

  It with the latest Linksys firmware reflash.  Always freezes.

  What should I do next?  I have a feeling that it is the same problem as in a lot of the advice of HP printer firmware.  This problem is bad solder on BGA CPU connection.  The difficulty that you put the formatter Board in an oven at 400 degrees for 5 to 8 minutes.  After this time let you cool at room temperature.  The oven heats the bad welds enough so that it assigns and gets a better connection.  There are hundreds of messages of success on that.  I also hear that the solder connection problem exists for many of the older game consoles review Xbox 360 causing the infamous "Red Ring of Death".

  So should I try to fight with Amazon for it back and eat the shipping costs?

  Can I cancel my warranty, open the unit and put it in the oven?

  I buy another router from a store, but then put it in the box and take it back?

  I just cut my losses?

  I just use this as a wired router (turn off Wifi) and plug in my WRT - 54 g and the brand that act as an access point?

  Thanks for the tips.

  Well, since it's only a week, Amazon sent me a new.  I just ship this one back in the box they send.  As long as they get it in 30 days I will not be charged.

  This one is def. a dud.  Hope that the next one works much better.  The first thing I do with there is a 1 GB transfer file and see if it freezes.

• Backflip: no data on Bell Canada to all please doesn't help?

  Hello! I just got my backflip via eBay - first very new smartphone, so please help! I unlocked it received a SIM from Bell (to Canada), activated, directs a data plan and they tell me that it's working. They also told me that the backflip fulfilled all conditions for their network. I can use it for phone, text, email and web via wifi without problem, but it does not seem be any data at all! I've never seen a flag State G, Edge, or 3G. I tried to turn wifi off and turning phone off & on. Under order settings, wireless, mobile networks, the operator, research networks selection it will show BELL four times as available networks. If I click on that it shows "Network with Limited Service found. You want to start the search network? "If I say yes or no, I get no results. I tried on several days in different areas with the same result. Can anyone help? Thank you. If I call Bell, they say just that it's not their phone so that they are not responsible.

  Choice of operator must be set to automatic. You need to make sure that you have the settings correct data under the APN (Access Point name) settings. Bell will have a certain domian, password, etc., which they use to access the data. When you talk to them just tell them you have their APN settings.

• Data networking BlackBerry (especially WiFi)

  A confused spirit is a spirit of work!

  Here's what I discovered recently on Blackberry and not a very pleasant discovery, I have to add.

  When not having not a dataplan BB, you can use the WiFi from your application.

  It seems that RIM has been generous enough to give the users of data plan BB possibility to reduce their costs on their data plan, expenses by allowing them the use of WiFi.

  WiFi is used only as an opportunity for "privileged" users

  If you not have data plan, you will not be able to use (this that forge otherwise be normal) WiFi connectivity.

  I tried several scenarios with or without the BB data plan and came to this conclusion. Among other things, the best tool used was the famous "Network Diagnostics" tool

  Anyone had success using WiFi (pragmatic, of course) on a device of non-activated data plan?

  In conclusion: the white WiFi icon is indifferent on that gray

  As mentioned, I do not use these flags, nor tried to determine where they can be defined.

  The following how I think it works, I don't have any entry of RIM and I'm not really good on these kinds of things.  So maybe I'm completely wrong!

  However my experience with the ServiceBooks leads me to think that the WiFi has two States

  (1) the unit can connect using WiFi

  (2) the device found "home port" and therefore will be directing traffic through WiFi.

  For BIS users, I suspect that these two would never happen, because I think that home port is that RIM provided server that is public, so can be found on any WiFi network.  For BES users, the device have found the BES via Wifi to get to State 2, which means that there really be VPNed in or on the WiFi of company.

  I think the flag you are testing is looking for State 2.

  If you don't have a SIM card or SIM card with a data plan, you will never get to State 2.

  My understanding and experience is that as long as you have State 1, you can use WiFi by coding '; = wifi interface.

  I tested that I can use WiFi in this way on the following devices: 8820, 8320, Bold, Curve 8900.

• automatic backup via timecapsule eventhough WiFi is disabled?

  How this work? I have the timecapsule connected via cable and wireless. I have most of the time the wireless not enabled. But still, the time machine related backups successfully. Not timecapsule active wireless connection automatically?

  Thank you

  René

  Time Capsule cannot control the wifi on your Mac.

  For clarity, you have your desktop Mac Pro, right?

  I ask because many users mistakenly post in this forum (Mac Pro desktop computer) when they really have a MacBook Pro.  With laptops Mac, the Mac will still make hourly backups not connected to the TM volume and when it is then connected to the volume TM backups will be written on this volume and deleted the Mac.

  On the time Machine local snapshots - Apple Support

• Send and receive data via the Ethernet Port?

  Hello

  I am trying to acquire details of LAN/Ethernet from the PC through LabVIEW.Like details, we get the date & time, etc Serial Port system, is it possible to get the details of my PC via LabVIEW.My LAN aims to sebd and Receive via Ethernet Port command.

  The last time I did it, I used the range of tcp. (I go ctrl + space for quick menu then type tcp). Open a connection to the network device, and then use tcp read/write, depending on the case. There are examples that can be very useful

• How to trace the number and string in a line (meter data via MODBUS recorder)?

  Hi all I did the log data amount using digital via modbus (RS485) meter to monitor how much and to reject what has and name operator, Machine and the part number.

  I have problem on plot number & string in one line, as shown in the image below:

  

  How to move this channel on a line? I enclose my vi.

  Thank you ~.

  Hi rhiesnand,

  at the moment you add 2 new lines in your table.

  The solution is to concatenate the two parts of the line to a greater range of 1 d before adding this table as a new row to your table 2D!

  Like this: