Background custom mode Conference room?

Similar Questions

• Conference room mode - how to activate it?

  I've configured Mode Conference room on my Apple TV... but how do I get the Apple TV will "go in" conference mode?

  When that I start the Apple TV for the first time, Yes, it will go into conference mode. But the touch of any button takes out, and there is apparently no way to recover it, before restarting. (Leaving even the Apple TV to sit for a few minutes only it supports screen saver mode, not the Conference Room mode.)

  Any ideas?

  It looks like you want the lock.

  You can use the Apple TV as a screen conference room so that anyone can easily share their screen of a Mac or an iOS with AirPlay device. When the conference room in display is enabled, a message appears on the screen with AirPlay connection instructions and details of wireless network.

  Allow the display of conference room. On Apple TV, in settings, go to AirPlay > conference room display.

  Create a custom message. In AirPlay settings, go to display conference room > Personal Message, then enter your message. Your message appears only when the Apple TV is in view of the conference room.

  Choose a background. In AirPlay settings, go to display conference room > choose picture, and then choose one of the types of background-photographers. If you choose my Photos, the Photos app opens.

  Conference room display mode overview. In the AirPlay settings, go to Conference Room view > preview.

  Lock conference room display mode. You can set up Apple TV so that it is locked in view of conference room until a secret 4-digit code is entered. In settings, go to general > Restrictions and enter the password if necessary. Then make sure that display conference room has the value restriction in the list of restricted items.

  Note: You use the same 4-digit password you set in Restrictions to unlock display mode of conference room. If you forgot the password, unplug the Apple TV plug, reconnect, and then press and hold the button that it restarts. This will unlock the conference room display mode temporarily.

• Need help on how to use the conference room in adobe connect

  I need help on how to use the conference room in adobe connect?

  I would recommend you start here: Getting Started with Adobe Connect - Adobe Connect user community

• Cine AE vs Custom mode

  Hi all

  I know this has been covered... but I learned recently that customized, defined in JUST S-LOG3 mode is better than THE MOVIE. As you push the ISO if you must and has a just as dynamic as Cine EI range.

  Is this true?

  Thoughts on that?

  
  

• Option wireless "walk between the conference rooms"? (maintain connection for 10 minutes)

  I feel that I read on this whne I was looking at the x 220 customers. Is this an option - and if not is it possible to recreate it in function in power options?

  To reiterate that it is: it allows you to close the lid of the laptop, to walk in a different room, open the cover and still be connected to your wireless network.

  Thank you.

  Shiren salvation!

  'S called it InstantResume, and the setting because it is in power, under use Manager the power base, or Global mode in Advanced Mode.

  Tell us how it works for you.

• Web page looks good with tranparent and photographic background in mode boxes live view, but not in browsers

  If someone has the time to help, I would be very grateful.   I am new to dreamweaver and I try to make a transparent Web page with columns and text box using styles.  It looks perfect in 'live view', but when I look in any browser all the formatting has disappeared.  It looks like the background with the text at the top of installed on wrapped throughout the entire page.   I was not able to understand what is wrong in the days of research.  Anyone know the answer?

  Presents all first format I want and that's what it looks like in mode Live View, the second is what it looks like to most browsers.

  

  Here's the code I used:

  < / style >

  "" < link href = "... / styles/tcastyles.css" rel = "stylesheet" type = "text/css" >

  < style type = "text/css" >

  {body

  background-image: url (bamboo. (JPG);

  margin left: 150px;

  }

  a: link {}

  color: #600;

  text-decoration: none;

  }

  a: visited {}

  text-decoration: none;

  }

  a: hover {}

  text-decoration: none;

  }

  a: active {}

  text-decoration: none;

  do-family: Verdana, Geneva, without serif.

  do-size: 12px;

  make-weight: bold;

  }

  a {}

  do-size: 12px;

  }

  body, td, th {}

  do-family: Verdana, Geneva, without serif.

  }

  . Container .faqs h2 {}

  line-height: 40px;

  }

  . Container .faqs ul li {}

  text-align: left;

  }

  .footer {}

  Padding: 5;

  position: relative;

  Clear: both;

  }

  < / style >

  < div class = "container" >

  < div class = "header" > < span class = "menutable" > < / span > < img border = "0" src = "navigate_projects.jpg" width = "307" height = "167" well = "#FPMap0" alt = "Conservation agency - project Menu" align = "absmiddle" / > "

  < map name = "FPMap0" >

  < area shape = "rect" coords = "112, 132, 172, 127" href = "asia.htm" alt = "Asia" / >

  < area shape = "rect" coords = "138, 92, 286, 110" href = "west.htm" alt = "Western Hemisphere" / >

  < area shape = "rect" coords = "138, 73, 279, 89" href = "flamingos.htm" alt = "British Virgin Islands" / >

  < area shape = "rect" coords = "131, 55, 249, 72" href = "turkscaicos.htm" alt = "Turks and Caicos" / >

  < area shape = "rect" coords = "121, 35, 244, 52" href = "newengland.htm" alt = "Narragansett Bay" / >

  < area shape = "rect" coords = "103, 17, 306, 32" href = "coyote.htm" alt = "The Coyote Study Narragansett Bay" / >

  < area shape = "rect" coords = "121, 128, 173, 144" href = "pacific.htm" alt = "Pacific" / >

  < / map >

  < / div >

  < div class = "menu" >

  < table width = "100%" border = "0" align = "center" id = "menutable" >

  < b >

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "mission.htm" > Mission < /a > < / strong > < /p > < table > ' "

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "pubs.htm" > Publications < /a > < / strong > < /p > < table > ' "

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "projects.htm" > project < /a > < / strong > < /p > < table > ' "

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "opps.htm" > opportunity < /a > < / strong > < /p > < table > ' "

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "sponsors.htm" > Sponsors < /a > < / strong > < /p > < table > ' "

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "coyote.htm" > NBCS < /a > < / strong > < /p > < table > ' "

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "guana.htm" > Guana < /a > < / strong > < /p > < table > ' "

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "tca.htm" > contact us < /a > < / strong > < /p > < table >

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "index.htm" > home < /a > < / strong > < /p > < table >

  < /tr >

  < /table >

  < / div >

  < div class = "banner" > study of the Bay of Narragansett Coyote < / div >

  < d/div >

  < div class = "box739" >

  < h3 > what do NBCS? < / h3 >

  < p > since 2004 the Bay of Narragansett Coyote study (NBCS) has developed strategies of coexistence and based management sciences for our most recent top-level predator.  Coyotes, originally a species of Prairie, have successfully colonized all parts of the continental and coastal us over the past 100 years. They reached the islands of Narragansett Bay in the middle of the 1990s. Since then the coyotes have become more and more abundant and problematic in some communities of the island. < /p >

  < p > in our history of cohabitation with the coyotes people constantly tried to eliminate them by hunting, trapping and poisoning. Lethal removal worked for individual problem animals but did not work as a strategy of population control. Why? Coyotes have physiological and behavioural abilities intrinsic to control their own numbers. If the coyotes are removed they increase reproduction and numbers to rebound quickly. The trigger of critical population regulation is competition for food. As long as the coyotes are well fed (with a few coyotes competing for food) their populations will grow. < /p >

  < p > we know also that the opposite effect occurs if the coyotes if the coyotes are stressed by competition for food. If there are too many coyotes competing for the available food coyotes will drop the sustainable level of these resources. < /p >

  < p > understanding of this relationship, the NBCS scientists decided to study the use of the resources of coyotes on two islands of Narragansett Bay, Rhode Island. We used GPS to find out location necklaces where coyotes are spending their time. We have made the assumption that if we could identify food resources important coyote - control - coyotes defray their own numbers. NBCS called & quot; management passive coyote. & quot; < /p >

  < p > since 2005 when we are caught in the trap and to collar our first coyotes on the island that we found continuously as the most important food resources of our study are provided people. This means that they are in our command this means that we can control the coyotes. If we remove anthropogenic resources (human grants) coyote numbers will drop to the sustainable level of natural resources. When the coyotes are fed only natural prey number of coyotes (mice, woodchucks, rabbits, geese and deer) will be lower and they will provide useful pest services. < /p >

  < p > according to our science NBCS generated a set of < has href = ' coyotes/best' practices for Coexistence with Coyotes - 8 Nov 2010.pdf management target = "_new" > best management practices for Coexistence with Coyotes < /a > - essentially a Toolbox for safe and sustainable community management, coyote. We work with the cities in our study area to adopt the CBMPs and be the first community in the nation to successfully and sustainably manage coyotes. We believe also in other cities and towns might be able to use our results as a template if they have problems of coyote. We have barely begun to implement the CBMPs on our islands. We soon hope to have all our implementation of the CBMPs cities - only, then we will see the full impact they make on the coyote numbers and behavior problems. You can follow our progress on this Web site. < /p >

  < / div >

  < div class = "footer" >

  < table width = "100%" border = "0" cellspacing = "5" >

  < b >

  < td > top < table >

  < td > < a href = "mailto: " [email protected] "> [email protected] < /a > < table > "

  < /tr >

  < /table >

  < / div >

  < / div >

  < / div >

  < p > < / p >

  < / div > class iv = "FAQ" >

  < H2 > FAQS < / h2 >

  < ul >

  How can < li > I coyotes control their own population? < /li >

  < li > blah blah blah < /li >

  < /ul >

  < / div >

  < div class = "content" >

  < div class = "Yopougon" >

  < div class = "col1" >

  < h3 > Middletown adopts the CBMPs and passes an order of non-Feeding! < / h3 >

  < / div >

  < div class = "col2" >

  < h3 > driver, Java and the Valley Pack < / h3 >

  <

  And here's the styles:

  . Container {}

  height: 1500px.

  Width: 975px;

  border: 8px solid #660000;

  float: left;

  }

  . Header {}

  float: left;

  height: 170px;

  Width: 975px;

  background-color: #033000;

  }

  .menu {}

  background-color: #FFC;

  float: left;

  height: 30px;

  Width: 975px;

  do-family: Verdana, Geneva, without serif.

  do-size: 9px;

  color: #660000;

  make-weight: bold;

  margin-bottom: 5px;

  }

  .table {}

  do-family: Verdana, Geneva, without serif.

  do-size: 8px;

  make-weight: bold;

  }

  . Banner {}

  float: left;

  height: 100px;

  Width: 739px;

  do-family: Verdana, Geneva, without serif.

  font size: 37px;

  make-weight: bold;

  color: rgba (0,51,0,1);

  background-color: rgba (255,255,204,.7);

  text-align: center;

  line-height: 75px;

  border-radius: 5px;

  padding: 5px;

  margin: 5px;

  }

  {.clearbox}

  float: left;

  height: auto;

  Width: 760px;

  }

  {.box739}

  Width: 739px;

  float: left;

  height: auto;

  background-color: rgba (255,255,204,.7);

  do-size: 12px;

  color: rgba (0,51,0,1);

  border-radius: 5px;

  padding: 5px;

  margin: 5px;

  }

  {.faqs}

  float: right;

  height: 620px;

  Width: 205px;

  do-family: Verdana, Geneva, without serif.

  do-size: 12px;

  make-style: normal;

  line-height: normal;

  overflow: scroll;

  background-color: rgba (255,255,204,.7);

  margin: 5px;

  border-radius: 5px;

  make-weight: bold;

  color: rgba (0,51,0,1);

  text-align: center;

  }

  {.col1}

  float: left;

  height: 500px;

  Width: 359px;

  background-color: rgba (255,255,204,.7);

  do-size: 12px;

  border-radius: 5px;

  color: rgba (0,51,0,1);

  margin: 5px;

  padding: 5px;

  }

  {.col2}

  float: left;

  height: 500px;

  Width: 359px;

  background-color: rgba (255,255,204,.7);

  do-size: 12px;

  border-radius: 5px 5px 5px 5px;

  color: rgba (0,0,0,1);

  padding: 5px;

  margin: 5px;

  }

  .footer {}

  position: relative;

  Clear: both;

  background-color: rgba (255,255,204,1);

  do-size: 12px;

  color: rgba (0,51,0,1);

  }

  From the looks of your screenshot, I'd say it's a path problem.  Are you sure that you downloaded the CSS document when you loaded the page and that the path is correct?  It appears in your second screenshot that there is no style applied so your stylesheet is not included for a wrong path or because it is simply not there.

• Prefrences portlet change in custom mode

  Dear,
  
  no idea how to edit portlet preferences and apply these preferences to all users not only the logged in user
  
  what I want to achieve is
  
  Log in with the admin account
  enter editing mode or any mode custom
  Edit portlet preferences
  apply these changes to all users "visitors".
  
  I don't want to change the preferences of the administration console that I need to change a specific mode
  ??
  
  I can change only for the current account only portlet preferences
  
  Thank you

  Hello

  This gets a little complicated, so let me try to explain. In WLP, there are 4 'types' of portlet instances:

  -"Primary": this represents the portlet is defined in one .portlet file or the portlet.xml, without any changes. The principal Gets the "default values" preferences, drawn from .portlet or portlet.xml files. The main body (and "default values" preferences) are not editable at runtime, even through the administration console.

  -' Library': the portal administration console creates this kind and allows you to change the values of preference on this instance. This portlet instance inherits all the values of preference its parent portlet 'primary' type, unless the value of the preference has changed explicitly for the instance of the library.

  -"Admin": an instance of portlet is placed on a page by an administrator (either by using the tools of a visitor or the administration console), but not modified by a non-administrator user. This portlet instance inherits all values preferably its portlet type 'primary' or 'library' parent, unless the value of the preference has changed explicitly for the admin instance.

  -' User': a portlet instance that has been changed (had changed values preferably) by a non-administrator user (or a user administrator, acting in non-admin mode). This portlet instance inherits all the values preferably its parent portlet type "admin", unless the value of the preference has changed explicitly for the instance of the admin.

  Thus, when you use the portal administration console to change the values of preference, you are connected as an admin user, and you change the "library" or "admin" type of instance portlet preferences. If you choose to propagate the preferences, 'user' bodies which had the 'admin' or 'library' as its parents (or grandparents) instance will also have the values changed preference applied; This resembles the value "default" changed (but it isn't really the "default value", in order not to be confused in this looking at the API).

  The code example I gave above is simply the portlet instance that is on the page (any type of instance is) and applies changes to the preferences, then propagates the changes to all instances of child portlet. If the logged-on user is not an admin user, preferably changing values will result in an instance of type 'user' portlet, which applies the changes to preference only to this portlet instance. If a user admin is logged and the portlet instance is of type 'admin', then preference will be applied to the 'admin' of the portlet instance, and any changes will be propagated to all of the 'user' of the portlet instances that have this particular instance "admin" as a parent.

  So-so that values preferably spread so that all uses can see them, the user who defines preferences MUST be an admin user, and they should be setting the values of preference on an instance of "Admin" or "Library" portlet type The code example I gave above does not check if the type of portlet instance and really should check to ensure that it contains the definition of preferences on the instance of portlet admin. Unfortunately, there is no way using the API of WLP to determine the way portlet instance type supported. So that you can find this code will work for you, but Oracle support will be unwilling to support:

  import com.bea.netuix.events.Event;
  import com.bea.netuix.events.CustomEvent;
  import com.bea.netuix.servlets.controls.content.backing.AbstractJspBacking;
  import com.bea.netuix.servlets.controls.portlet.backing.PortletBackingContext;
  import com.bea.netuix.application.identifier.PortletInstanceId;
  import com.bea.netuix.application.instance.PortletInstance;
  import com.bea.netuix.application.manager.persistence.PortalCustomizationManager;
  import com.bea.netuix.application.manager.CustomizationContext;
  import com.bea.netuix.application.NetuixHomeFactory;
  import com.bea.portlet.prefs.spi.PreferencePersistenceDelegate;
  import com.bea.portlet.prefs.spi.PortletPreferencesId;
  import com.bea.portlet.prefs.Preference;
  import com.bea.netuix.servlets.manager.AppContext;
  
  import javax.servlet.http.HttpServletRequest;
  import javax.servlet.http.HttpServletResponse;
  import javax.servlet.http.HttpSession;
  import javax.xml.namespace.QName;
  import java.util.Map;
  import java.util.HashMap;
  import java.util.Enumeration;
  import java.util.Locale;
  import java.util.ArrayList;
  
  /**
   * A Backing file for accepting an event with a Map payload
   * of preference values, which are then merged in with existing preferences on the portlet
   * and propagated to all child portlet instances.
   */
  public class PropagatePreferenceBacking extends AbstractJspBacking
  {
      public void handleCustomEvent(HttpServletRequest request, HttpServletResponse response, Event event)
      {
          try
          {
              Map preferenceMap = (Map)(((CustomEvent)event).getPayload());
  
              PortletBackingContext ctx = PortletBackingContext.getPortletBackingContext(request);
              AppContext appCtx = AppContext.getAppContext(request);
              String webappName = appCtx.getWebAppName();
              String portalPath = appCtx.getPortalPath();
              String desktopPath = appCtx.getDesktopPath();
  
              String portletInstanceId = ctx.getInstanceId();
              int portletId = Integer.parseInt(portletInstanceId);
  
              // See if the portlet is at least an admin instance
              NetuixHomeFactory homeFactory = NetuixHomeFactory.getInstance();
              PortalCustomizationManager custManager = homeFactory.getPortalCustomizationManagerHome().create();
  
              Enumeration localesEnum = request.getLocales();
              ArrayList locales = new ArrayList();
  
              while(localesEnum.hasMoreElements())
              {
                  locales.add((Locale)localesEnum.nextElement());
              }
  
              CustomizationContext customizationContext =
                  new CustomizationContext((ArrayList)(locales), request);
  
              // See what type of portlet instance it is, and travel up the
              // portlet instance heirarchy until we find an admin or library
              // type portlet instance to set preferences on.
              while(true)
              {
                  PortletInstance portletInstance = custManager.getPortletInstance(customizationContext,  PortletInstanceId.createPortletInstanceId(portletId));
  
                  ///////////////////////////
                  // UNSUPPORTABLE CODE BELOW
                  ///////////////////////////
                  com.bea.netuix.application.instance.internal.PortletInstanceInternal pInst =
                      (com.bea.netuix.application.instance.internal.PortletInstanceInternal)portletInstance;
  
                  if(pInst.getInstanceType() < 4) // An admin or library type instance
                  {
                      break;
                  }
  
                  // It was a user type instance-- find the parent portlet
                  portletId = pInst.getParentPortletId().getId();
  
                  /////////////////////////
                  // END UNSUPPORTABLE CODE
                  /////////////////////////
              }
  
              // Now that we have an admin or library type portlet instance, set the
              // preferences and propagate
  
              PreferencePersistenceDelegate prefDelegate = PreferencePersistenceDelegate.Factory.getInstance(true);
              PortletPreferencesId prefId = new PortletPreferencesId(portletId, webappName, portalPath, desktopPath);
  
              // Get existing preferences and merge the preference maps
              Map existingPrefs = prefDelegate.getPreferences(prefId, request, new HashMap());
  
              for(String pref : preferenceMap.keySet())
              {
                  Preference p = (Preference)(existingPrefs.get(pref));
                  Preference np;
                  if(p != null)
                  {
                      np = Preference.createPreference(pref, p.getDescription(), preferenceMap.get(pref), p.isModifiable(), p.isMultiValued());
                  }
                  else
                  {
                      np = Preference.createPreference(pref, "", preferenceMap.get(pref), true, true);
                  }
                  existingPrefs.put(pref, np);
              }
              // Now store the preferences and propagate the preferences to all successors
              prefDelegate.storePreferences(prefId, existingPrefs, request, false, true, false);
          }
          catch(Exception e)
          {
              e.printStackTrace();
          }
      }
  }
  

  In addition, to obtain the instance ID of the portlet for Java (JSR168 / JSR286) portlet, you can use the following code:

  public String getPortletInstanceId(PortletRequest request)
  {
      HttpServletRequest httpRequest = (HttpServletRequest)(request.getAttribute("javax.servlet.request"));
      PortletBackingContext ctx = PortletBackingContext.getPortletBackingContext(request);
      String portletInstanceId = ctx.getInstanceId();
      return(portletInstanceId);
  }
  

  Kevin

• HP Envy 700-074 custom ' mode "Eve"

  1. Windows 8
  2. HP Envy 700-074 with monitor from 2005.
  3. Keyboard and mouse wireless
  4. 2005 via USB HP printer (don't know the model right now, I'm at work)
  5. The screensaver is the folding at home screensaver.
  6. HP Envy bought in February 2014.

  The computer enters mode "Eve" from one day to the next, or I hit function-SleepButton. Monitor goes into mode with a yellow economy light energy.

  When I try to wake the computer via the keyboard, the monitor is from yellow to green, which means that the PC is a signal, the fans of PC and the light is on, but the screen remains black.

  Tried to update the bios by using this link , but I get an error every time:

  "This update of the BIOS is not compatible with this unit". I think it's BIOS has not confirmed the update via msinfo32. BIOS version is still 80.15. Option to upgrade button is gray, this button on the same BIOS update screen as 'Save BIOS to flash drive' and 'Save BIOS file.

  The issue is not that the keyboard is not set to wake up the PC, as the monitor light goes from yellow to green, when I type any key of the keyboard. Which indicates that the PC is a signal.

  What are my options here?

  Thank you.

  Your update to the newest BIOS would not go. So I installed all the updates Windows 8, including those in option, and it seems now out of fashion 'sleep'. Thank you.

• How to make themes OS7 in custom Mode?

  Can any knows about themes customized for os7?

  At the moment you cannot develop themes for OS7 help theme builder 6. The only way would be to follow complicated methods to "hack" or cheat your way into building themes for OS7. But keep in mind that the method is not simple.

  Kind regards

  Flow

• SX20 and SX10 recommended for small Display built-in speakers using conference rooms

  Hello

  IM planning to deploy a few small rooms of meeting using SX20 and SX10 codecs, I was wondering if someone could give me a few key points to consider:

  1. display recommendation, beautiful built-in speakers, low delay (goog with codec echo cancellation performance), I want to use a 60-70 inch Led TV (not yet defined which brand and model), I would like to receive feedback on beautiful poster with nice audio performance and echo cancellation performance according to your experience.

  2. What are the disadvantages of using SX20 and SX10 bigger meeting room maybe 10 or 12 people?

  3. when to use an external microphone? or when is recommended to only use the internal mic?

  Thanks in advance for your help.

  Best regards, have a nice day!

  1. Pretty much no matter what modern screen should work - different people will have different ideas on the question of whether the speakers are all good, you must listen to a few yourself and make up your community what you think is "better".  Echo cancellation can be changed manually on the codec to adapt the display if necessary (rather than leave it on "auto" which, put in our facilities, has caused more trouble than it's worth).
  2. The main disadvantage of using the SX10 or the least expensive of the range of the SX20s, is the camera and zoom.  In a larger room, you won't get a good closer with a camera 2.5 x.  I would say for a larger room, you look at the 12 x cameras.
  3. As a general rule - use additional microphones when you can't get someone in a radius of 3 m one of the other pickups.  So in a larger room, you may need to much.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• question of background screen mode

  When I use the tool "select color range", the background of the document (standard, black grey fullscreen) goes to the grey checkerboard graphics.

  Help!

  I use cs5 master, os 10.6.4 and I've upgraded to the latest version of photoshop... Thank you.

  Start with the command-alt-shift.

  Have you tried turning off OpenGL in the Performance preference (and restarting Photoshop)?

• Possible to limit the virtual office users to connect to the customer in the room 1 class?

  I apologize if this is an arrogant question but I didn't quite know how to find this without other strange visits.

  What I want to do, is to deploy a classroom with (non-persistent) virtual machines as a CEP. This class can be used by anyone, so I'll need to entitle "Everyone" or "Domain users" to access these machines. However, I do not want to download the VMWare Client on other workstations and use virtual desktops in this pool. We will have a separate pool for this behavior (scenario 2). My original plan was to limit it with a firewall, but this would not at all for the second scenario.

  Is there a solution integrated into the rest of the Horizon to welcome a 'right workstation' or is there a better solution for my problem?

  Thank you very much

  -Brandon

  You will need to create a second connection agent and then tag it and the pool of offices with the same tag.    The next step could be class routing to this particular broker.

• HSV values in custom mode

  Maybe it's my lack of understanding.
  1 but if I get the first value of the VHS (so the value shade), I understand this must be a value in degrees on 360, right?
  According to wikipedia: varies between 0 and 360 (but standardized 0-100% in some applications)
  http://en.Wikipedia.org/wiki/HSV_color_space
  
  But none of the two versions up to 100 or 360, it creates the right angles in the color wheel.
  
  2. more or less, is also built on the last question because I want to start creation of color combination based on the harmony of the degrees indicated in the image of this site:
  http://www.metacolor.de/winkelharmonie.htm
  
  Can you please help? By the way: great tool!
  
  
  
  Concerning
  
  Steffen
  
  
  

  Hello

  This from our special invited talk Ty Voliter, Adobe kuler:

  The reason that the hue of the HSV color model number does not match the angle of the wheel is that Kuler uses a red-yellow-blue color wheel. This wheel fits the color wheel that many artists know where red/green, blue, orange and magenta/yellow are supplements. This wheel has been invented by Johannes Itten, a theoretician of color and art Switzerland. The color wheel does not correspond with different types of color receptors in the human eye and reflects rather how pigments are mixed by painting. Addition of complement of a color with the color wheel Cup.

  Here are a few references with more information:
  http://realcolorwheel.com/othercolorwheel.htm
  http://www.Color-Wheel-Pro.com/color-wheel-types.html
  http://en.Wikipedia.org/wiki/RYB_color_model

• Failed to create the Conference on virtual server of telepresence

  Hi all

  I installed Virtual Server of telepresence and injected the LIC-AES-VTS-PMP-K9, LIC-VTS-PMP-INTOP, LIC-VTS-PMP-K9-LIC-VTS-PMPUWL-1SL. I wonder why I can't create the conference room. When I access the Conference menu, there is no button to create the Conference.

  Thank you.

  With virtual Server of telepresence that you will not be able to manage or create conferences directly on the server TP, you must use the conductor to create and set up conferences.  The virtual server TP is identical to the pluralistic media 310/320, to see how the virtual model differs from other models TP server, they are listed in the Cisco_TelePresence_Server_on_Virtual_Machine_Release_Notes_3-1 xbottom of pg 2.

  To learn more about the managed mode remote TelePresence Sever in use with the conductor, you can learn more on this subject in the Cisco_Telepresence_Server_Release_Notes_3-0_2-48, pg 2.

• The implications of Cisco Telepresence server operation mode

  I have a CISCO Telepresence server that is currently running in mode managed locally, if change you it remotely and add it to my TMS, will I lose all my permament locally created conference rooms? (be they get deleted?)

  Thank you!

  HI Douglas.  TS blade didn't need to be mode remotely managed so that it can be managed by TMS.  This mode is used for the management as a conductor Telepresense.

  When it was presented, was 3.0 TS.

  Release notes:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TS/release_note/Cisco_Telepresence_Server_Release_Notes_3-0_2-24.PDF

  Page 2 pretty much answer your questions here.

  If your not using a conductor or by using your own program API to use TS in this mode, its better to leave behind in managed mode and add the system to MSD and leave it that way.  This is the normal operating mode if you use the TMS.  Let in managed mode locally, add it to the TMS and you can book etc. against it using TMS meetings.  If automatic discovery is enabled in TMS, permanent meetings should appear in the CCC.

  I hope this helps.

  VR

  Patrick