SX20 and SX10 recommended for small Display built-in speakers using conference rooms

Similar Questions

• graphic and CPU recommended for a freelance artist working with cintiq and photoshop

  im going to use the cintiq 22hd to use advanced daily for digital art.
  What processor and graphics card type recommended for a freelance artist working with cintiq and photoshop?

  Hi Drok'e,.

  Please see the following articles:
  For graphics card: video card FAQ and Adobe Photoshop CC GPU (graphics processor)

  Requirements of CC of Photoshop: Photoshop system requirements

  Kind regards

  Tanuj

• HP Z400: map graphic and CPU recommendation for a HP Z400

  OK so I bought a computer in a local thrift store for $ 30, I was able to boot into the shop to see this work before buy you, its a HP Z400 Workstation Desktop Xeon 3520 2.67 GHz 6 GB of RAM 240 GB drive HARD Windows 7. power supply stock of what I can say is, the power of 475 watts ok so I have 2 questions

  #1 What is the best processor xeon tthat this PC can take charge and what version of bios that I support says CPU?

  OK now the second question OK so I know this isn't a gaming machine I know its for tips of CAD and 3d but I need you guys to recommend me a decent game GPU that requires no external power and can run star trek online with decent settings not sure how many amps are on the rails of the PSU as I don't have the pc with me right now If cpu do you recommend and what gpu games do you recommend that I should not that id prefer a gpu nvidia on amd if possible, but as long as the card can operate star trek online everything is fine

  kurt459,

  Go into the BIOS F10 setup and look at the date of start-up under system information block.

  If the boot block date is 2009-01-30, the system supports only the Xeon processors at 35xx.

  If the block start date is 11/10/2009, the system supports both the 35xx and 36xx Xeon processors.

  If your system has the block to start later, you can install a 6 hearts Xeon 36xx, which will give you more performance.

  If you have the older boot block, it is not possible to update to support the 36xx processors.  There are several discussions in this forum about attempts to update the boot block, but HP does not support and does not provide any tools to do so.

• have a 3 years old, nev er used to have problems with speakers toshiba laptop but now neither speakers are not working and I do not have the built-in speakers for netflix natural

  read the title, I can't get extra added on the speakers to work regularly, drives crazy me, can't hear netflix movies

  Hello

  What version of Windows are you using?

  • If your laptop uses the Realtek HD audio drivers then try to update the Realtek HD audio drivers for the last one is on the site Web of Realtek (who seems to have a lot of later Toshiba support site). After updating to the latest Realtek HD drivers, open the DD Realtek Audio Manager and enable "Loudness equalization.
  • Turn off the laptop (not a hibernation or sleep), Remove the battery and the adapter Plug and press the power on/off (nothing should happen, but it could fulfil all power remaining inside the laptop). Wait five to ten minutes and then reinsert both and reboot the laptop. For some, it seems that putting into hibernation and or "sleep" mode on these laptops cause the audio drivers to behave strangely.

  You can also try to go to Device Manager > click on the< next="" to="">

  Right-click on the driver and update or roll back to the driver

  Contact Toshiba technical support

  http://support.Toshiba.com/support/home

• Can I turn off the setting that displays the height and width in a small black box when you use the marquee selection tool?

  In Photoshop CC on a mac...

  When you use the marquee selection tool, a little black box appears next to the cursor and displays in real time, the height and the width of the selection.  The same annoying box also appears when you drag an item with the tool move, displaying the numeric position of the cursor.  Is there anyway to disable the display of this little black box?  It makes me crazy.

  In cmd/ctrl-k preferences click "Interface". At the bottom of the interface user is a drop down menu to see the transformation. The value as 'never '.

  

• Title and Meta tags for product display?

  I see this problem correctly?   There is no way to add descriptions of title and metatag to each product pages?   If true, this is a major flaw of SEO in British Colombia.

  I went to the module templates and regular templates and do not see a way to add specific to each product page.  This should be done by default!

  When you add the meta in the layout produced great will in the thead element.

  For example, you can use tags such as custom1 for your meta description and title of product for the title of the page.

  Fact

  BC has recently updated the Blog finally with possibility to have the right title and meta so I hope that products will get some treatment in this respect too.

• two profiles/levels of audio volume for headphones vs built-in speakers like Macbookpro

  Hi all

  As in my macbook pro, can I make the computer don't forget the volume for headphones and speakers integrated levels?

  Headphones: 10 volume, volume integrated speakers 25 etc. If I remove the headphones, the volume is expected to increase to 25 and when I put headphones, it should decrease by 10 new... ! is not necessarily 10 and 25, it's just to get an idea... !

  Nevermind, it works like that already, cannot remove this question well.. !

• best configuration for Small Business Server

  I'm looking for advice on HW and SW recommendations for a small business.  We have 15 users, 20 computers and 3 printers.  I currently have a single Windows Server 2008.  I want to run a domain controller main for all users, file sharing, print server, possibly Windows Update Center and eventually MS Exchange.  I am trying to decide the best configuration of HW with a fairly cheap budget.   I currently have 1 I7 based server with 4 GB of Ram, several IBM servers, P4 306 m (I have 4 +), and a lot of hard drives (all in a half rack).  I also need a decent backup system.

  Can anyone recommend the best configuration of HW player and hard?  Should I analyze server roles?  With respect to the SW, I'm a non-profit and use Windows Server 2008 (at a discount)

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• What is the display screen color recommended for fine arts

  I need to send pictures of my works so, what color recommended for my screen?

  Each monitor will interpret according to local settings of RGB. LCD monitor displays colors in this way, by combination of red, green and blue LEDS (light emitting diodes). It is an additive color model in which Red, green and blue are added together in various ways to reproduce a wide range of colors.

  You have no control over other peoples screens settings

  Make it look good on your is the best you can do.

  If you want to print CMYK is a subtractive color model, used in color printing, which you have control of the finished product.

• I get a popup "Recommended for You" and on other sites, I get audio from a radio station (?) play and there is no other windows open.

  I get a "recommended for you" popup even if I ran antivirus programs and malware and they say they took their.
  I have also audio play when I connect to some sites, even if only one tab is open.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Satellite 1000-Z2: I need a driver for the display and the LAN

  Hello

  I reformatted my laptop S1000-Z2, and I have a real problem trying to find all the information about this model!

  Basically, I need a driver for the display and the LAN?

  Best regards

  Austin.

  What operating system do you use?
  If you use XP, you will not find the network on the site recommended driver driver!
  I can't give you advice where to find such driver because I don t know what the LAN card is installed in your oldie.

  But why you n t check yourself? Try to know what the LAN card you use and googel a bit for compatible applications ;)

• HP Flex10 and config recommended vDS for HA and failover?

  In the last two days I have experienced connectivity issues with my VM and I think I reduced it to beacon probing when is used as a failover mechanism in my groups of port / VLAN. I guess that the broader question "is what the settings recommended for failover based on my hardware configuration"...

  My ESXi hosts run 5.0.0U1 or 5.1.0 I just walking to vCenter 5.1.0a. Hosts are BL460c G7 servers in a c7000 with ICs Flex10 chassis. Each ESXi has a profile of server blade with 4 FlexNICs: a pair for the movement of data all VM (several Tagged VLAN) that belong to a vDS. The second pair is used for all traffic management and (at the moment I have reset) is on a stand-alone vSwitch with untagged traffic.

  Uplinks for each IC go with the Avaya VSP9000 switch. The two VSP9ks are connected by a STI trunk with all the VLAN tagged.

  Initially, I discovered the source of my traffic has dropped with the ARP table of a computer virtual pretend flip flop between the local binding of 10 GB on an Avaya and the link of the IST for the other Avaya (i.e. the uplink of the other IC module was used), which can cause a small temporary loop.

  No matter what method of load balancing I configure in the PG (stick to those supported by VC) and regarless if I have the two dvUplinks marked as Active or a marked as Active and the other as the day before, I see occasional about-face when beacon probing is used.

  I've set up virtual networks in Virtual Connect to use Smart Link, so I hope that Link Status should only be enough.

  Now while I still don't entirely understand beacon probe (I read about it on a few posts), I was hoping that it could provide a little more resilience despite having Smart Link set up on the side of VC.

  So for those of you who have the same hardware configuration, how you have configured your?

  Long term, I would like to bring to the management of virtual machines inside the vDS, mainly to have more flexibility in the management of bandwidth to have a slice of the 10 GB uplink established Virtual Connect level. I tried to put the management in the vDS but failed miserably and I think it's down to a scenario of chickens and eggs and I get the order to execute orders wrong... I'll look in that, once my configuration problem above fundamental network has been sorted.

  Thank you

  regarding overhead... NIOC is... good... but the general rule is that we release the core esx... so if we use more features... it will finally be an overhead projector... and if physical hardware does the same... thing... so it's better... This is why vmware has now VAAI... SRIOV... CPU/Memory unloading... If someone does not have the blades... and then if they have 10gig NIOC is only option...

  http://pibytes.WordPress.com/2013/01/12/multi-NIC-VMotion-speed-and-performance-in-vSphere-5-x/

  Management and vMotion are on the same VLAN (but different IP addresses) - it is recommended to use a VLAN from a safety perspective... and in production, this is how we do it. they can share the same NIC... no problem... but it should be labeled. 2 natachasery with 2gbe is good - I have recently done a comparative analysis of the speed of vmotion in the blade, you can see more info in my blog - http://pibytes.wordpress.com/2013/01/12/multi-nic-vmotion-speed-and-performance-in-vsphere-5-x/

  So a few questions:

  • I understand that you recommend keeping management / management of vMotion in a pair separated from flexNICs way to not give an additional charge within VMware.

  It is not mandatory... we have to use separate NICs... its all based on the customer's environment. But in separate VLANS... of couse VST marking consumes cycles CPU... we can ignore... the world... This is ignored. in case, you can use 2 natachasery with 2gbe to combine the mgmt/vmotion.

  • Y at - it an advantage of splitting management and vMotion in different VLAN but keep in the same uplink (so the VLAN tagging)

  security wise and best practices in production, we use separate VLANS, and we can share the same NIC...... There are some use cases as... that if you have 100 guests... and there may be several vmotions happening at the same time... in this case, we use dedicated pSwitch so that VMOtion traffic will not FLOOD the main switch. so here we use natachasery dedicated... in a small environment and a well balanced and if not on subscription of cluster CPU/RAM, then there is very little happening VMotion... If we can share the same natachasery and same pswitch.

  • Would we be better to use two different pairs of FlexNICs, one for management and one for vMotion using 3 pairs of FlexNICs in total (1 for all data VLAN, one not marked for management and a third no marked for vMotion). If so, I guess you'd give different bandwidths in VC to keep vMotion, nice and fast?

  According to my bench marking... what I did... If we give... 2GbE for vmotion, going too fast... and once again, as I said above... We can combine... or just give 2 natachasery with a bandwidth of 500 MB for mgmt and 2 gig for vmotion for VM traffic rest... * it is a good design... Here, we have isolated physically and VLAN wise as we need to isolate.

  for the low response fo the console... check the DNS resolution... and nothing to do with... the bandwidth. Check the CPU/RAM vcenter and the Vcenter CPU/RAM database...

• I'm a composer of musicals for children and do a site for my work, but am a perfect beginner in Web design! Sound application what would you recommend for playback of tracks of my musicals and how to install it?

  I'm a composer of musicals for children and do a site for my work, but am a perfect beginner in Web design! Sound application what would you recommend for playback of tracks of my musicals and how to install it?

  There is no "request" in itself, and according to which browser and the device is used, this could end by into a mess of different options of incorporation. So to save your sanity upload your files to a service like Soundcloud and use their built-in widgets and code.

  Mylenium

• Recommendation for installation of small business

  I have a small remote site that is running two physical servers.  No server is too active and both were installed in 2002 and need to be retired.  I'll migrate physical servers and put them on VMware.  I think it makes sense to have two servers low range and replcation backward them.  I'm looking for recommendations for setting this up as economically as possible.

  On another similar site, here's what I did: have two servers, both with a quad core processor each and both with

  internal readers 10 SATA RAID. Both running ESX 3.5 Foundation. I have

  Veeam Backup and replication to replicate back between the

  two servers. That is, four total VM = will execute two on each server and

  replicate back. If a server fails, the other server will be

  Run all four VMs.  I did all of this for about $9 k.

  Is there another approach in this ball park which makes more sense?  Any suggestions are appreciated.

  Hello

  I set up an office in a box and use one of the tools of Veeam backup, vRanger connection, PhD virtual and remote to the local office backup desktop every night. This way if there is a problem all that send you them is a new box with all their data restored. Or restore you it if necessary. For only 2 virtual machines, replication between two hosts at the remote office looks like a bit more to kill.

  If the host dies you have them replicated to the local office and people can use a VPN to access the data in an emergency. 1 host with a NAS for local backup also sounds pretty good.

  It's more a problem of backup/DR/business continuity and you can watch from the perspective of these tools.

  Best regards

  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
  "Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• Recommendations for a good cleaner liquid screen and type/brand of cleaning rags?

  Recommendations for a good cleaner liquid screen and type/brand of cleaning rags?

  Or are the wipes of alcohol okay? (Like what you get in a closed container and pass through a hole on top)?

  The safest method of cleaning of the screen is to use a thin rag (glasses cleaning cloth) moistened with distilled water.  NO ALCOHOL.

  I used successfully:

  http://www.Windex.com/en-us/products/pages/electronic-cleaner-and-wipes.aspx

  Ciao.