backlight doesn't light upward

Similar Questions

• T400 without BACKLIGHT, no status lights on the inverter

  Hello

  Backlight of my t400 died there not too long ago... pinkish hue before he cut out completely is the death, give right outside?

  Apparently it's not the whole story, I replaced the backlight without success then replaced the inverter and don't always show no results.

  An external monitor will work fine and I can see an image on the screen with a flashlight shining on the screen.

  I noticed another symptom though, also the backlight works is not the green status lights on the inverter also do not turn on. However, when I installed the new inverter first I remember lights works but the backlight doesn't work do not.

  What do you think guys?

  A connector/cable problem, a problem of motherboard (fuse?) or UPS (I have a feeling that new one I got is fried).

  Thank you

  I answered your other topic

• Satellite A500 - 15 h - keyboard backlight doesn't work anymore

  Hello @ all,

  After that install Win7 on my purchased new Satellite A500 - 15 h the backlight for the keyboard no longer works.
  I don't know if it worked before with vista... but if all goes well.

  Lighting is enabled in the Bios. Features (on F1 - F9) controlled by the Fn do not work as well as the tone that has been heard normally by using the function for lower keys / turn on the sound cannot be heard even if the sound signal is enabled in the BIOS.

  I hope someone can help
  Thanks in advance
  giraffe

  I have already installed value added package and updated BIOS.
  Under Linux, the keyboard is also not on.

  Hello

  First of all, you need to get the keys FN working again.
  To do this, you must install the VAP and the Toshiba Flash Cards support utility from the European driver Toshiba page.

  Regarding the backlight on the keyboard;

  Not all laptops are supported the backlight on the keyboard.
  You should check the Z button.
  If the Z button would contain a sign tiny keyboard then the laptop was equipped with backlight on the keypad and it should be possible to activate this using keys FN + Z combination.

  Welcome them

• Smart backlight doesn't

  Hello
  I have sony xperia Z2, BUT Intelligent backlight control isn't work.why?

  A response by another user:

  It works on accelorometers and not by looking at

  It detects if your holding it by the movement and keeps the light, so if you put it on the side it will turn off regardless if you look at

• Yoga 2 13 keyboard backlight doesn't work anymore

  I mean Ive had this thing for over a year, and at some point the backlight stopped working

  dosent even work on start up which is not a thing

  and Yes, I used to illuminate with the space bar fn and at startup

  just to say

  something happened after I closed the lid especially hard, after I got crazy during a match and the next day when I started the backlit keyboard worked as if nothing was ever forward

• Battery indicator LED of DELL 15R 5537 (i5 6 GB 500 GB Touch WIN8) no light upward when the charger is connected

  Hello

  I just got a Dell 15R 5537 (on September 29, 2014) and when the laptop is turned on or off, the led on the front of the PC does not illuminate. What is the problem? should I get it replaced?

  Jason

  Hi Jason,

  The following led lights only when the AC adapter is connected to the system and is in charge of the battery.

  

  If the light is not lit when the AC adapter is connected to the system then I suggest you try to Flash the BIOS of the system. Please enter your service tag # on the link below, select the operating system and then download the BIOS from the system BIOS section and install it.

  http://Dell.to/18r60nI

  Please let me know if it helps.

• BlackBerry smartphone trackball doesn't scroll upwards or downwards.

  The track ball on my BB Curve 8330 Scrolls left and right, but not upwards or downwards, which really limits my use of it. I tried to take out the battery, clean the ball with alcohol, turning off and back on. The ball seems loose - not sticky. Would appreciate any help!

  Thank you!

  I got my BB to the store where they replaced the trackball for $10, and he now works as it should. As my warranty has expired for a long time, I was happy with that. Panic at the wire.

• BlackBerry smartphones to screen light upward for incoming

  Can you tell me why my screen lights up when I have a caller ID incoming call showing type info but it only lights up to see the incoming text or msg info.  Is - this usual?  Can I do light for both?

  Thank you

  Nick

  This is the default setting for the screen light up when you receive a call. He normally only would light up not for other notifications. However, he is there, a program called 'Aerize alerts Email' that creates small pop up alerts when you receive messages. You can check it out here: http://software.crackberry.com/product.asp?id=21671&n=Aerize-Email-Alerts---Email-/-SMS-Popup-Notifi...

• I WANT JUST A BUTTON TO LIGHT UPWARD WHEN HOVERED OVER WITH A MOUSE

  WHAT I WANT TO DO IS KNOW HOW TO MAKE A BUTTON LIGHTS WHEN I GO OVER IT WITH A MOUSE

  Thank you very much

  If your symbol is a button symbol, it is without the need for ActionScript code. Simply create an alternate version of your symbol in the State SURVOLE in the calendar that shows the illuminated button. A quick way to get a 'fire' effect would be to use one of the Glow type filters on your MovieClip symbol and more State:

  

  In theory, you can extend the SimpleButton class to apply the effect through code AS3 dynamically for the State, but when the Flash programming environment performs this task for you, the only reason why I could see using the code to do this is to facilitate the application of the filter through the Tween class.

• Re: Equium P300-190 - multimedia keys doesn't light up or work

  Multimedia keys between the speakers on my Equium P300-190 have suddenly stopped working and illuminating, the power button and the bar at the top of the touchpad still turn on any ideas how solve this problem?

  Thank you

  I don't know much on your laptop, try to update the utility Ppvs of the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
  In addition, check in the Bios or install hw if illumination led option is enabled

• Re: Satellite A300-21I trying to start but the screen does not light upward

  I have a laptop Toshiba Satellite A300-21I 15.4-inch around the age of 2 months.
  He walks yesterday and received a message (very short)-initialization failed, see the event log.

  Laptop computer tries to start but the display does not illuminate.
  No prior problems.

  The indices of anyone?
  Stanley

  Hello

  You are able to access the BIOS?
  You see a Toshiba start screen that usually appears at the beginning?

  What happens if you press F8 at the beginning of the boot process?

  Please provide more details!

• My laptop stop while configuring windows updates, it now doesn't start upward.

  After installing updates my laptop turns off automatically, re-started when he went to a screen saying it was the latest updates of windows configuration.   He got 15% and stayed like that for about 20 minutes, and then my battery died.    Now, it starts up.  The laptop turns on and is lit saying it is on, etc., but all I have is a black screen.  I can hear the hum of the fan, but nothing happens.    I tried to re - start and press F8 to try to start in safe mode, but I get nothing.

  Hello

  The operating system that you are running on your computer?

  If you are unable to start the computer in safe mode, and then try to perform a system restore in the system recovery options menu.

  For more information, see these articles.
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• VM doesn't qutoboot upward after the restart of the ESXi host

  Hi all

  I environment, there is only a single Cluster. The Cluster has an ESXi host. all virtual machines including vCenter VM are resides on the ESXi host. When I reboot the host can all VM does not start?

  For comparison, there is a different environment, there are two Clusters (Cluster 1 and Cluster 2) in vCenter, Cluster 1 has two hosts ESXi Cluster 2 has only a single ESXi host. vCenter runs on the ESXi host residing in Cluster1.

  When I reboot the host residing in Cluster2, all virtual machines may start automatically.

  is that any expert can explain the difference? Why single environment can auto boot VMs when both of these environment has a host to the Cluster and cluster activate HA service?

  environments are executed at the ESX5.5.

  You will need to check the box allow VMS to start and stop automatically with the host system and then change the setting on the edit tab, and mention what needs to be done for each machine.

• Question of blackBerry Smartphones Ringtone...

  OK so I have my email set up with my blackberry address, is anyway that I can change the voice that I hear when I receive a message? Furthermore, I don't like that my blackberry doesn't light upward when I receive a message, is anyway that I can change this? She doesn't right now is vibrates, makes the annoying tone and the small red led lights up.

  It's frustrating. Help!

  EDIT: Fixed formatting

  Hello and welcome to the Forums!

  Go to your profiles icon.  Scroll to advance... Press track ball, tap EDIT, and then change your emails, sms sounds, alerts, etc. (when you click on the alert that is out there, you can scroll upwards or downwards and select the email you want!), click Save!

  It comes into force the profile what ever you defined only for.

• Wireless Gaming receiver doesn't work. Light bulb turns when you try to synchronize.

  I have the game official wireless receiver and when I press the sync button, it will not light upwards and used to synchronize with my controller. I tried to reinstall the software. I tried all the holes in my USB. Windows 7 64-bit. I look in the device Manager and I do not see the unrecognized devices.

  If it used to work on tha same pc and it does not work on all the others, looks like he's dead. It is odd for things to die when they are not used, but it happens.

  Good luck!