Backup is the entire computer, not last point

Similar Questions

• I have a Canon 7 d Mark II and I'm using Lightroom version 5.7.1 on a Mac computer. My question is, I can't get attached to my computer. Lightroom and my computer recognizes my camera, but the connection did not last long and she also gets lost and then c

  I have a Canon 7 d Mark II and I'm using Lightroom version 5.7.1 on a Mac computer. My question is, I can't get attached to my computer. Lightroom and my computer recognizes my camera, but the connection did not last long and she also gets lost connected, then lost several times until the capture of attachment option is closed. I tired buy new cables, lightrooom and call Update to Canon support, but still nothing works for me please help?

  Hi Martin,

  In order to make shooting with the Canon 7 D Mark II captive, you need Lightroom 6 and higher.

  Please visit the following link: a list of cameras that can be attached to Lightroom.

  Kind regards

  Tanuj

• I want to create a restore disk system on another HDD without having to back up the entire computer?

  I have Windows XP Professional, and I do a back up of all the windows files that I need to run windows (I hope) on a second hard drive. I want to create a file recovery from windows on this drive, but when I go in the options backup, I have to pick up the entire computer in order to get this recovery file created. But I don't want to back up all my personal files and programs because that would take in charge the secondary hard drive together.  How to create this recovery file without saving the entire hard drive? Thank you.

  I have Windows XP Professional, and I do a back up of all the windows files that I need to run windows (I hope) on a second hard drive. I want to create a file recovery from windows on this drive, but when I go in the options backup, I have to pick up the entire computer in order to get this recovery file created. But I don't want to back up all my personal files and programs because that would take in charge the secondary hard drive together.  How to create this recovery file without saving the entire hard drive? Thank you.

  If you do any type of backup - only circuit, dat, or all - on a second internal bank or a second partition, you are just kidding yourself. It is the lowest form of backup doesn't exist, and is barely better than no backup at all. He let losses likely to be simultaneous to the original and backup for many common dangers: serious power, near the lightning seeds, failures of hard disk (if it's a second partition), virus attacks, even the theft of the laptop.

  In my view, secure backup must be on a media removable and not stored in the computer. For backup really secure (necessary, for example, if your company depends on your data), you should have several generations of backup, and at least one of these generations should be stored off-site.

  You can read this article on the backup that I wrote: 'Return to top your computer regularly and reliable' to http://www.computorcompanion.com/LPMArticle.asp?ID=314

• change the entire computer in English.

  I just got a new computer, but everything is in Spanish, is it possible that I can change the entire computer in English? How can I do this?

  Thank you and Merry Christmas

  Penny Tavera

  E-mail address is removed from the privacy *.

  If you have win 7 Ultimate it is easy to change the language.  If another version, I think it can't.

• My mac had to be repaired several times and eventually I was forced to restart the entire computer, wiping everything.

  My mac had to be repaired several times and eventually I was forced to restart the entire computer, wiping everything. I registered my purchase CS6 Design Standard of two years, so I have the serial number, but I don't have the record of the initial purchase. How do we install CS6 on my practically new Mac?

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  ADDITION to previous versions http://www.adobe.com/downloads/other-downloads.html can help

• Backup of the Vista computer error

  Windows complete PC Backup 64 Business impossible.  The disk error 0 x 800 80005 stops the backup every time.  Regular file backup works fine and the timeline for the 500 GB ESATA drive.  I made the suggested registry checks and disk maintenance tasks.  Nothing has changed the appearance of the error.

  I want to make a backup of the computer, because Vista start not right.  It starts slowly.  After about 20 minutes, he finished his commissioning and works very well.  Also, event viewer said always the registration Service is not started and does not work. My motherboard is the ASUS P5N-E SLI with 8 MB of RAM.

  Hello

  ·          What is the exact error message/code you get while taking backup?

  ·          Are you trying to backup a drive hard or CD/DVD?

  ·          For how long is your computer running slow? You did it changes on your computer before this problem?

  This problem may occur if you close the backup progress dialog box before the end of the backup.

  You can try taking the backup and do not close the backup progress dialog box after the insertion of CD/DVD discs or after connecting the hard drive.

  To improve the performance of the computer, perform the clean boot and check if the computer is working properly. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs and eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  (1) perform the clean boot (check the link to perform the clean boot).

  (2) enable half the services.

  (3) determine if the problem comes back.

  (4) enable half of the startup items.

  (5) determine if the problem comes back.

  (6) repeat the steps above until you find out which program or service is causing the issue

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135.

  In addition, check out this link.

  Optimize Windows Vista for better performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• cleaning of the entire computer

  How to erase everything on my computer and start again.  Ive got overheated, slow computer, too many mistakes etc tired of him cutting.  I think I want to just start again. computer laptop inspiron 1525 Dell. Thank you

  Hello

  Overheating is normally caused by a build up of dust, but you say you have a computer, not a mobile computer when this happens often.

  Here is the Dell reinstall options:

  How to reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  ______________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I backed up my old computer, how do I install the backup on the new computer? The two Windows 7

  How do you install the back upward from my old computer to my new computer?

  It's probably a backup of the data, and you have saved on an external device.

  http://www.howtogeek.com/HOWTO/1838/using-backup-and-restore-in-Windows-7/

• 0x8007045D Won ' t back up the entire computer

  I'm trying to back up my computer while an external HD with 300 GB of space (more than enough) with windows to the top.  2 minutes in the back up he abandoned and gives the error message (0x887045D).  I did chkdsk on drives and still the same thing.  On the files and folders backup it does very well.  Any ideas?  Thank you.

  First of all, how is externally (FAT-32 or NTFS) formatted drive?  FAT - 32 imposes a 4 GB file size limit and maybe it's not a problem with the files and folders, but there are some files of the system who may be that large and that would stop the process in its tracks.  The only solution to this problem would be to format or convert the disk external drive to NTFS where there is no such limit.  If the drive is empty (or you can temporarily move all that is there), it would be better to do a full format (since that would eliminate another potential cause of the problem at the same time).

  Second, I couldn't find a single answer looking for this error (with the exception of this thread).  Are you sure that you have right?

  What version of Vista are you using?  An image compllete backup is only available on certain versions.  I don't see how you would even be able to start if it was the wrong version, but I'ld confirm you it in any case.

  At this point, I would like to give some links for how to make backups in Vista just to be sure, you are using the correct procedures.  Image backups are a little different that backup file/fulll.

  This is a GREAT article on the backup and restore processes in Vistahttp://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.  It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  You do as an administrator?  Otherwise, sign in as an administrator and try again.  Also, disable any software security you have running while you do the backup - it might interfere with the process.  Finally, if this does not work, try to do minimumhttp://support.microsoft.com/kb/929135from a boot. and see if that helps.  Don't forget to return the system to normal mode once done with the boot.

  I hope this helps.  If this isn't the case, post returns with answers to the questions and answers for the procedures that you have tried.  We will see then what are the other options, we can try (if necessary).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Open my pictures slows down the entire computer

  I have a Windows XP computer that missed anything when I open my pictures. There are probably only 50 pictures in the file, but get the thumbnails to fill takes all means, making the computer unusable for 20 minutes approximately.

  What is the solution?

  Thank you

  Scotty B

  Hello 1ScottyB1,

  Thanks for the return of the response.  You only experience this problem with your folder "my pictures"?   You ran analysis complete with your antivirus software and possibly some type of removal of malware?

  Try the steps below and let us know the status.

  In Windows Explorer, select 'Tools', then open "Folder Options".   From this window, select the "View" tab and check "not to put thumbnails cache.  When you reopen your file, it might take some time initially, but see if are able to open the folder quickly after it fills.

  Thank you

• I just got a new Windows 7 computer. How I completely restart the entire computer and lose all files, applications, etc., that never came with the computer first?

  * Original title: restart the computer

  I just got a new Windows 7 computer, and it has many applications in this shift makes the apps that I really need. How can I completely restart the computer world and lose all files, applications, etc., that came with the computer first

  If these are apps you added and want more, you can use the functionality of your computer factory restore. Unfortunately, this erases the disk and leave you with a double précis of his State when you turned on for the first time.  Then, you would have to do all the updates of Windows and then install all the programs you want.

  Otherwise, use programs uninstaller (from Control Panel) for each application that you do NOT want to uninstall.

• Is updated to windows 8, reset the entire computer, including passwords?

  I forgot my password for my computer laptop windows 7. I had the idea of buying a physical and updated copy to update to windows 8.

  I don't care if I lose all my files, because I have not used the laptop for a while and nothing important is about it.

  Will this work if I do this?

  Thank you

  Windows 8 is a new reformat and install the o/s. It will wipe your computer clean.

• DVD drive on the new computer not recognized

  Hi can someone help.

  My computer did an automatic update at the weekend and now the DVD shows also not recognized.
  I thought about uninstalling and reinstalling would do it.
  Now, I can not reinstall so am without a dvd player on my all-in-one which I desperately need.
  Help!
  Any help would be appreciated
  Thank you

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116

• Dedicated network adapter to the virtual machine and the host computer not let can visit his profile

  OK, here's my question, I know how to give themselves a phyiscal nic to a vmware, but I wanted to take it one step further and do not leave the host send or receive data from this network card, only the virtual machine can use this network/NIC...

  Here's my reasoning, I have to network conections, one is for my internal/field network and the second is a direct connection to the internet (Comcast) I don't want to use to separate the machines have for internet connection, I want to be on the same machine phyiscal and have just the vmware machine talking to comcast... is it possible?  I am running VMware workstation 7, last update.

  Thank you

  Cdrshm

  I assume you are using a Windows host?

  If Yes...

  -first set up networking networking with vmnetcfg.exe

  -assign vmnet0 to the network card for the internal network

  -assign vmnet2 to the network card used for direct access to the internet

  -Right-click on the map network-icon in the systray and access the properties of the network adapter for vmnet2

  -Disable all other protocols and the Protocol of vmware_bridge for this network adapter

  result: a virtual machine that uses vmnet2 can directly access the internet and the host has no IP address for this network adapter - and therefore cannot use it.

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• How do I change the site settings so I can work on the local computer, not remote site

  I have to work on a Web site that was initially set up for 'work on remote site (not recommended)'.

  I did a redesign of the site on mylocal computer because I could not go live until I approved it.

  How can I combine the old and new sites? I had to use an external ftp program to upload the new files and replace the index page. It all works very well online, but I wish I could put small changes directly from Dreamweaver. So far I can one of my new files put on the remote site through Dreamweaver.

  If you have the site files on your local computer, simply create a new definition of site in the normal way. Then delete the old site definition.

  A Dreamweaver site definition simply controls how to communicate with the remote server. Deleting a site definition deletes the definition. It has no effect on local files.