Problem after installation of Windows XP Home on Satellite L355-S7812

Similar Questions

• Problem after installation of window upates

  Original title: windows 7 problems because microsoft updates this week

  Hello

  Since the latest windows updates this week, MS computer windows 7 my husband does not work correctly.

  Most of the time there was no internet connection, although my laptop in the same room connects.

  Worse, it's his slider has the circle of rotation that continues for hours.

  I did F8, then: Startup Repair. memory diagnostic; System Restore (pre update); last good configuration...

  I'm not grumpy, so don't want something complex to do.

  Without a doubt-related updates.

  His computer crashed the first time they went, in automatically.

  When I finally received it goes and makes system restore, then downloaded the updates one by one with reboot between each of them and create a system restore point before each new updated the laptop seems to work again.

  Stop us it, but the major problem started once it was lit again in the afternoon. Really frustrating and such a waste of time.

  Any suggestions?

  Do not clean the computer and reinstall, so please do not suggest that.

  My deep gratitude.

  JM

  Hello Craig,.

  I understand the inconvenience you encountered.

  According to the description, I understand her you are facing problem after installing windows updates.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Did you do any change important before this problem?

  2. What is the brand and model of your system?

  3. Are you an error message\ error code on your system?

  To resolve this issue, you need to determine the cause of the Windows Explorer to stop functioning, try the troubleshooting steps below to help decide the issue.

  Method 1.

  Step 1. Try to go into safe mode with network and check.

  Start the computer in safe mode and check if the problem persists. Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  To switch to safe mode see the link given below

  Try to go to safe mode with networking and check.

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  If the problem does not exist in safe mode, try to perform a clean boot and check.

  Step 2: Perform the clean boot.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  If the problem persists, try Method 2.

  Method 2 System File Checker.

  You can run the System File Checker tool and check if it helps. SFC scan will scan system files corrupted on your computer. You can read the following article to use the appropriate System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files.

  http://support.Microsoft.com/kb/929833/en-us

  Hope this information is useful. Please let us know if you need help with Windows.

  Thank you

• Problem after installation of windows 7 in my hp nc6120.

  Please help me find the Mass Storage Controller, Simple PCI communications controller and video controller for my HP nc6120. I just installed Windows 7 and I can't find these drivers. I can not either at HP.

  Thank you

  Hello:

  You must run the vista for the video driver by using the manual installation method.

  Download and run this file at the link below. You will get an error not supported operating system. Close to that.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=447346&prodNameId=447347&swEnvOID=2094&swLang=8&mode=2&TaskID=135&swItem=ob-47264-1

  Now, go to Device Manager, click on the section of graphics cards and click on standard VGA card.

  Click on the driver tab, click on set to update driver. Select travel it my computer for hardware method and browse to the installation folder that was created when you ran the file.  Who will be in C:\SWSetup\sp34749. Make sure that the include subfolders is selected and the driver should install.

  Restarts, you should have a decent graphics card, but you won't have Aero because the graphics card of your laptop is not completely Vista or W7 capable.

  You need this driver for the mass storage controller:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=1847703&prodNameId=1847704&swEnvOID=2096&swLang=8&mode=2&taskId=135&swItem=ob-70996-1

  For simple PCI, please post the the hardware ID for it so I can see if there is an appropriate driver.

  If you don't know where to find the hardware ID, please read the info on the link below.

  http://www.DeviceDriverFinder.com/blog/device-drivers/how-to-check-the-hardware-ID-for-a-Windows-device

• Drivers are interfering with Windows out of the standby mode after installation of Windows Vista Home Premium Service Pack 2.

  I followed the instructions of service newsletter and reduced to an Intel Graphics Kernel Mode Driver (igdkmd32.sys) that slows him back. The pilot is the more up-to-date version and the update of a windows wants.

  What are my options? I guess I need this driver as is the graphics found in the device manager driver. "Rollback Driver" is not appear as an option. I need to restore Service Pack 2 to resolve this problem? Thanks for your suggestions...

  For issues related to Vista SP2, there is FREE Microsoft Support assistance is available at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1.  I suggst contact you and get their expert help for your problem that was caused by SP2.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Incorrect video memory is displayed after the installation of Windows XP Home on Satellite A205

  I bought by Satellite A-205-S4577 with Vista, but it is not working properly, so I installed XP SP2 and now in "graphics properties" 'information' is written that video memory is 8 MB to 32 MB. If memory should me shared 8-244. What's wrong? I installed all the drivers I need, there is no problem in Device Manager... I tried different types of XP, different types of drivers - every time is the same...
  Help, please!

  The system is:
  Intel Core Duo T-5300
  1024 DDR, Intel 945 GM Chipset

  Hello

  First that you must install the latest DirectX (9 .0c) because according to your second post the DirectX 9.0 is installed only.
  Then the shared memory amount depends on main memory. I don't know if the graphics card will be able to share the total of 256 MB, if there is only 1 024 MB memory main available m.

  Anyway, as much as I know Intel graphics cards automatically share memory.
  This means that the Intel graphics driver assigns the value of the memory in the event of urgent need.

  If the card doesn t need additional memory, the value remains low.

  But can I ask you if you tried to install the graphics driver for the Intel page?
  Check it!

• Preparation of an installation of Windows XP Home edition CD with a MINIMUM required drivers for A200-1AX

  Greetings,

  I am trying to install Windows XP Home edition on my old days by Satellite A200-1AX. Today, I tried to boot from the CD of Windows XP Home edition or after the copy of the system files, the laptop produces the error that Setup did not find any hard disk during the Installation of Windows XP. I looked on the internet and found the following page:

  http://www.howtogeek.com/HOWTO/Windows/resolving-Setup-did-not-find-any-hard-disk-drives-during-Windows-XP-installation/

  Explains how to resolve this problem. So I try to make my own installation CD of Windows XP Home edition with the necessary drivers. My first question is: what are the minimum required drivers to ensure a smooth installation process until I get the XP running? It is not necessary to install the drivers for all the A200-1AX since the first installation of XP, I can always go back and install those remaining of the XP; but I don't want the installation process interrupted due to a missing driver where I have to repeat the process of manufacturing more install of WXP CD custom. The list of drivers and devices provided by Toshiba is too long to write on a single installation with XP CD.

  My second question is: there is an update of the bios/firmware required in accordance with the instruction list. Is it necessary BEFORE or AFTER the installation of Windows XP Home edition?

  If I decide to go back to VISTA using the recovery CD, I must restore the bios/firmware?

  Thanks in advance for your answer.

  Best regards, Ashraf.

  > My first question is: what are the minimum required drivers to ensure a smooth installation process until I get the XP running

  You will need to include only the Intel Matrix Storage Manger for the XP CD again. Without this iMSM XP will not see the HARD drive
  This driver is important. Other drivers can be installed after the installation of XP!

  > My second question is: there is an update of the bios/firmware required in accordance with the instruction list. Is it necessary BEFORE or AFTER the installation of Windows XP Home edition?

  There are 2 versions of BIOS; One for Vista and one for XP. Generally, the update of the BIOS must be made before the instillation of OS but you can also try to do after installing XP. In both cases, the update of the BIOS would be possible.

  > If I decide to go back to VISTA using the recovery CD, I must restore the bios/firmware?
  Generally, Yes! Without the good BIOS features like the FN buttons could not work properly!

• Can I install Parallels after installation of Windows using Boot Camp?

  Windows on Mac

  Can I install Parallels after installation of Windows using Boot Camp?

  You can install Parallels, but you will not be able to transfer your license existing if its already active in Boot Camp. You first need to remove the Boot Camp, then you can transfer it to Parallels. You may need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Need help with the installation of Windows XP Home on my Satellite Pro A300-1DZ

  Hi all.

  I have a Satellite Pro A300-1DZ system unit, model no PSAG1E-OOFOO4EN (think they are 'o' and not '0', circle with slash through it) with WXP Pro.

  I recently contracted a virus inside and as he removed, however it is not good so I want to re - install Windows XP Home edition. I backed up the computer, I have a Windows XP Home SP2 Pro edition disk and I have my product key.
  I put the CD/DVD in BIOS to run 1 drive and tells me that I can boot from the CD, I press a button and it loads the CD, select the option where to install windows.

  BUT! I can t go further than what windows does not detect the HD said he s not now, or whatever.

  My question is this: Please can someone me step by step instructions on how to reinstall XP and a link to all the drivers I need to make it work?

  PLEEASE!

  It's simple on my PC, also, please keep in mind, I am best suited for working on cars, I'm not stupid, but my calloused hands search for computers a little more difficult than Motors please not in many computer technical terms.
  I myself am the slow education in the dark arts of computers. LOL :)

  PS. the laptop has a Vista Basic sticker on it, but it is certainly the XP pro operating system. :)

  Hi jeff

  Here's your solution:
  1. go to bios with F2 when you see the toshiba start screen.
  2. Select the arrow to the left using the "Advanced".
  3 press down until you get to "SATA Controller Mode".
  4 change, using F7/F8, Chang [AHCI] setting [compatibility].
  5. make sure the CD/DVD drive is the first to start and F10 save and exit. computer restart when you are prompted to "press any key" press a button and hey presto as before windows will start the installation, but this time you won't get windows you said:

  Set up did not find Ant hard disks installed on your computer.

  Make sure any drive HARD are powered on and properly connected to your computer and any hard disk related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or Setup program.

  implementation cannot continue press f3 to goto hell... uh I mean leaving the installation

  And you can continue on your installation of Windows XP Home edition.

  Hope I helped many other jeff's in the same boat. XD

• No 1110ea audio envy 15 after installation of windows 8 64 pro

  No sound on my 1110ea envy 15 after installation of windows 8 64 pro.

  Maybe the audio drivers hp are repaced by victory 8 drivers?

  ass pls

  Hello

  Try the driver from the following link and see if it works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us & LC = on & DLC = in & softwareitem = ob-113849-1

• What do I need to uninstall Windows 7 after installation of Windows 10?

  What do I need to uninstall Windows 7 after installation of Windows 10?

  You upgrade from Windows 7 to Windows 10?  If so, how it remains on the disk?

  If your question is about whether the operating system that is used to qualify for upgrade can be used even if it is still eligible for the upgrade, the answer is no it is essential will be blocked until the upgrade is removed during the reinstallation of the old operating system.  Then it may take wake-up phone to retrieve the old operating system license.  Also is it better to keep the old operating system using a Windows 7 System Image backup which can recover the old BONES in 20 minutes and preserves the activation.

  Let us know if that answers your question.

• How to install Windows XP Home on Satellite P100-488?

  Hello

  I have a computer a Toshiba Satellite P100-488 and on windows vista, but I would go to windows XP.

  What should I DO, please?

  Hello

  Installation of Windows XP Home edition on this model of laptop doesn't have to be so complicated.

  At the first visit Toshiba under you and http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download page you can find all the drivers, tools and utilities for Windows XP Home edition. Under product type, choose ARCHIVE. Your Satellite P100 is model PSPADE, so choose the right model.
  As the first file listed by download is installation instructions document. After installing WXP install all the drivers, tools and utilities following this order of installation. It is very important.

  Good bye.

• How to install Windows XP Home on Satellite A300?

  Please help me! How to reformat and install the operating system Windows XP Home for Satellite A300?
  Can someone help me with this?

  Thank you...

  Hello

  First you need to download xp drivers: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
  Second, you must create the floppy or custom installation CD of Windows XP with integrated storage drivers. the custom installation CD, you can use Nlite http://www.nliteos.com/. There are guides in different languages, so you won't have a problem to create a. Don't forget it will have to include "Storage drivers", without them, Setup does not recognize the hard drive.
  Third install XP :)

  But be aware, you may encounter some problems, as audio doesn't work do not (updated Windows XP specific need or Service pack 3), some Fn keys not working do not, some unrecognized hardware and so on... You really have to patient when installing XP on new laptops. So good luck

  (Tip: download all readers and store it because it is quite possible that the LAN/WAN connection will not work without a driver)

  See you soon

• Need drivers of Windows XP Home for Satellite A210-16F

  Hello everyone,

  Can someone point me to the page drivers WXP for my laptop (AMD x 2 TL-58, 2 GB RAM, ATI HD2600, 160 GB)?
  Well, as most of the users I want to improve (sorry fans of Vista, but I can't use the downgrade of Word because new BONE from the guys in Redmond s...s) for Win XP.
  I am not able to find the drivers of Windows XP Home edition on the Toshiba site (except 2).

  Thanks in advance.

  P.S. Hello, Toshiba driver developers. We need more drivers Win XP. Please help us!

  Hi Vommy

  Please use the advanced search on this forum and you will find some very interesting discussions about the drivers of Windows XP Home for Satellite A210. You are right. At the time current Toshiba offers no drivers of Windows XP Home edition.

  Please start with this one

• Windows vista activation problem product ID and Java (0xc0000005) fatal error after installation of windows vista format.

  Original title: try to put wrong question ID problem!

  Due to problems of Java, I formatted and made a new installation.  My Vista Home Premium says its active.  When I try to put my product id was not found. When I try to leave microsoft to find that they can't pick up my computer and I can't enter by hand, he said its incorrect.   When I try to ask online chat, I cut that they deal with activation problems.  It is activated, I can't get the Web site recognize my product id, so I can post for help?  The world is - that sound familiar at all?

  I have fatal routine Java errors when I play a game Runescape.  I'd appreciate any help anyone could give me. Thank you

  A fatal error has been detected by Java runtime environment:
  #
  # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc = 0x6d884dca, pid = 3032, tid = 2976
  #
  # Version JRE: 6.0_30 - b12
  # Java VM: Java hotspot Client VM (20, 5 - b03 in mixed mode, sharing windows - x 86)
  # Problematic frame:
  # V [jvm.dll + 0x94dca]
  #
  # If you want to submit a bug report, please visit:
  # http://java.sun.com/webapps/bugreport/crash.jsp
  #

  Hi Verisetti,

  Have you installed security software after formatting windows?

  If so, you can uninstall the security software temporarily and check if you receive the access violation error.

  If the uninstallation of security software solves the problem, you may need to configure the settings of the software of safety accordingly. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you install the security software after the trial.

  What about Windows vista product ID, you can try to validate Windows and check if it helps.

  For more information, see the following articles:

  What is the validation, and how does it work?

  Genuine Windows: Frequently asked questions

• Bluetooth doesn't work does not correctly after the installation of Windows Vista Home Premium Service Pack 2 (SP2) on Dell laptop

  I searched this forum and almost all resources on the net for days now nothing works.  Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.

  Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).

  My system:

  Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0

  * My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.

  Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue.  I stress that I have not had any problems with this device before downloads.  I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.

  I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities.  The problem is obviously the need for an updated driver.  I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).

  http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=RC956904&l=en&s=pub&SystemID=INS_PNT_P4_9400&os=WLH&osl=en&servicetag=&catid=-1&impid=-1&deviceid=12084&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&releaseid=R159805&formatcnt=1&vercnt=1

  I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work.  They won't recognise BT devices.  I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.

  http://www.Broadcom.com/support/Bluetooth/update.php

  I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion.  Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers.  I guess that's what they are charged to do, they do not have to admit a problem of compatibility.  This obviously the same link they would charge $60 to send.  I explained that I need just a Bluetooth Driver from Dell to at least version 6.3.   Needless to say, I will never buy another Dell product.

  On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer).  This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided.  Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.

  Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.

  Thank you for your help.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner