Backup of the user's profile

Similar Questions

• I lost the user's profile after the execution of an update of the Microsoft Vista

  After an update from microsoft on December 18, my user profile on the computer has been lost.

  It says there was an error loading the user's profile, and that any changes made to the computer now will be lost once the computer is offline.
  For me it of more my ruined A £499 of the cell value and not good for me.

  I'm not a computer genius and don't know what I'm doing.

  Can someone tell me please know what Microsofts update to vista did and how to fix it please.

  > Can someone please advise me as to what Microsoft s for vista update did and how to fix it please.

  I think THAT the guys at Microsoft would be able to say what did the Vista update
  To be honest I m running Vista updates too, but my computer and all my profiles are not affected

  However, what you could do is to put the OS up to this early time using Vista's system restore.
  Perhaps this will help you resolve the issue.

  If not, then maybe you can manually configure your user profile

• I have a corrupt user profile. Windows XP. When I add a new can be the same, or should be different. And the user's profile should match the user ID?

  Corrupted user profile

  I have a corrupt user profile.  Windows XP. When I add a new can be the same, or should be different.  And the user's profile should match the user ID?

  If the profile has recently become corrupted, you can probably get the same user by performing a system restore operation:

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  Otherwise, you will need to create another user and copy your data.  The simplest procedure is here:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• Cannot load the user's profile after putting in the administrators password

  I have 3 profiles, me, my son and my cousin, they can get on their profiles but mine won't let me, when I type my password it is said to add the password for administrators who must be me, so I add my password again once and it says can not connect to the user's profile. Ive disappeared on the other accounts to restore the computer but whenever I want to do something, she comes up with my name and to add the directors once again password, so basically used let me not to do anything. Help!

  Hi jem500,

  ·         You type the correct password?

  Please see the below article mentioned on the Microsoft Policy on lost or forgotten the password.

  Microsoft's strategy concerning lost or forgotten passwords

  See also:

  Keep secure passwords - Microsoft strategy on move the passwords

• Copy the user default profile problem profile

  I am trying to copy a user profile to the default profile for all users who log on will have the same parameters as the user.
  I used the built in tool copy of profile under System Properties > advanced > settings...
  For all copies fine except some program registry keys still point to the original profile rather than the newly created on logon profile.  This seems to work without problems under XP but in Vista it fails every time.
  Is there a new way to manage default profiles, that I don't know?

  Thank you

  Kleenex82,
  Thank you for visiting the Microsoft Answers community forum.

  CopyProfile Specifies if the default user usually stored under C:\Users\Default profile is replaced with the profile of the currently logged in user. You can use this parameter to copy the settings of user profile in all user accounts created on the destination computer.

  Use the following steps to define custom user profiles:

  Connect you as the user whose profile you can customize (for example, the built-in Administrator account).

  Customize the settings of the user profile of your choice.

  Set the CopyProfile to true.

  Run the command sysprep / generalize to copy the custom default user profile user profile settings.

  All subsequent user accounts created will have the customizations that you set. For more information about Sysprep, see the Sysprep technical reference in the Kit OPK (Windows OPK) user's Guide.

  This setting does not copy the profile of the built-in Administrator, unless the built-in administrator is the currently logged-on user.

  Let us know if this was helpful, or if you need assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Receive the Error Message "the user profile Service could not connect. Cannot load the user's profile' trying to change the administrator password

  Original title: how to change a password for an administrator account that does not work properly?

  When I try to change the settings for an account via the Control Panel, I get the admin password, but nothing happens. Close the popup box, but the program I want to open do nothing. I tried to change the password itself on the administrator account, but when I try to log on it, the message that appears is "the user profile Service could not connect. User profile cannot be loaded. "So far, I have not found a way to change the admin password or even that the password works. I tried to remove the program responsible for Parental control in the Task Manager, but it is too safe for me to enter. Is it possible to restart the Parental control or the account administrator if I can't access?

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the steps in the article mentioned below and see if the problem persists.
  http://support.Microsoft.com/kb/947215
  
  Hope that helps.
   

• Error "cannot load the user's profile.

  user profiles

  Due to a system restore after doing this process when I tried to connect, I get a message "Unable to load the user profile" help please!

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Display of a field on the form of the user's profile based on the results of another field

  Hello
  
  I have a requrement in which I'm supposed to display a checkbox based on the selection of the value to the employee type drp down.
  
  Thus, for example, if the field of employee type is selected with a value of 'Entrepreneur', a box should appear on the user profile form. If the value is anythign to another aprt of the contractor, the form should not display this box.
  
  Any ideas if this can be achieved OOB or it would require customization to the JSPs?
  
  Thank you
  Aerts

  You can use ajax and DHTML to achieve this functioanlity. I've already implemented and it works very well.

  See you soon!

• Select the user's profile

  IV been with FF on my lappy for years, now all of a sudden, when I try to start FF he asks me select a profile of user the following options:--

  - default
  - default-<number>
  

  This annoyed me no end, its bad enough that FF will update the controls and settles on the startup, but now this?

  Occurred for the FF developers that when pop users open a browser, we need to snap open, we have always ridiculous wait time amounts so that it starts. What happens if Im check the timetables of the bus - Id miss the bus. Or the time Iv in conference and needed a quick Web page - embarrassed! Both need FF Iv times and she could not be there for me in time. If I wanted a huge delay and/or additional tasks between clicking on open and opening then Id of course get some ridiculous instead adobe products.

  in any case as much as I like and love FF I have unfortunately closed to him for this reason and use Chrome instead. Ill check every now and then to see if the choice of a user profile error has disappeared.

  Thank you for breaking my heart.

  I solved my problem by changing chrome.
  Thanks for your very technical responses and imagine the simple question of why my browser always let me down when I need it in an emergency by performing updates or some other rubbish at the start.

• Cannot connect to the user's profile, can't remember the password

  I bought my HP Pavilion laptop of series g, almost 2 years ago. It worked perfectly until 2 days ago. When I woke up yesterday and went to the opening of session of Windows 7, I get the following message "the service user profile the logon failures. User profile cannot be loaded. »

  What should I do?

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• Delete the user or profile

  I changed users and passwords, but when I send photos etc happens again like C:\Users\Ric\Pictures... Ric's my exes name and would really like to get it out of there without having to transfer and save 1 million files. Is this possible?

  I changed users and passwords, but when I send photos etc happens again like C:\Users\Ric\Pictures... Ric's my exes name and would really like to get it out of there without having to transfer and save 1 million files. Is this possible?

  Create a new user account and start using it.  Changing the username doesn't change not all directories and others.  Creating a new user name and connect to the help that will be.
   
  If you have any "setup" as you want - you can use the Windows Easy Transfer Wizard to export the profile and then import the profile into the new account (the machine is OLD and NEW machines and you should use advanced options for the transfer of information BACK so you can choose the new account that you created and connected at the same time).

• Take the backup of the user database using oracle forms 6i

  I need backup user database using oracle forms 6i. Is this possible?

  Yes.

  Try

  When press the button trigger

  DECLARE
      un                VARCHAR2(30);
      pw                VARCHAR2(30);
      db                VARCHAR2(30);
      con_str        VARCHAR2(100);
      --
      data_file    VARCHAR2(100);
      log_file    VARCHAR2(100);
      cmd_line    VARCHAR2(200);
      ALT NUMBER;
  BEGIN
      IF :CONTROL.file_name IS NULL THEN --- take a file location
          IF SHOW_ALERT('FILE_NAME') = ALERT_BUTTON1 THEN
              RAISE FORM_TRIGGER_FAILURE;
          END IF;
      END IF;
      --
      un    := GET_APPLICATION_PROPERTY(USERNAME);
      pw    := GET_APPLICATION_PROPERTY(PASSWORD);
      db    := GET_APPLICATION_PROPERTY(CONNECT_STRING);
      con_str    := un||'/'||pw||'@'||db;
      --
      data_file    := :CONTROL.file_name||'\'||un||
                               TO_CHAR(SYSDATE, 'DDMMYYYY')||'.dmp';
  
      cmd_line    := 'exp userid='||con_str||' file='||data_file;
      HOST(cmd_line);
      --
  
      ALT:=SHOW_ALERT('MULTI_BACKUP');
      IF ALT=ALERT_BUTTON1 THEN
          RAISE FORM_TRIGGER_FAILURE;
      ELSE
          EXIT_FORM;
      END IF;
  
  END;
  

• Is there a widget to the user membership/profile?

  Is there a widget to have users sign up and have a profile on a site of muse?  I know there is wufoo, but it's just for forms, it does not create a usage profile.

  This is a great question and I'm so curious - configure a member with connections etc. on MUSE site using www.sentrylogin.com

  You have a free trial version on their part and they are cheap - basically the site will give you a box of username and password - and in the background, you can see how many members you have etc - technical support team is really great, so ask a question if you want.

  hope this helps - I wish that we had more options for this feature.

  Jay

• Log the user in the section problems - the service user profile service has no logon

  Hello

  Every time I try and log on to the laptop computer, the following message is displayed.

  "The service user profile Service has no logon.
  Unable to load the user's profile.

  other profiles can be connected without any problems.

  If you can help that would be great

  See you soon

  Check http://support.microsoft.com/kb/947215
  Maybe this can help you.