Delete the user or profile

Similar Questions

• Cannot delete the user folder?

  I can't delete the folder \\JONESPC\Users\Jack2 I tried to use regedit, but just ended up with a new \\JONESPC\Users\Jack2.JONESP folder

  This problem occurred when I tried to change the username to my main account I could do successfully by using the mode without fail & regedit
  But in the process, I created a new account I wanted to delete it later
  I went through the normal process via Add or remove user accounts & then click on delete the user account & then remove all files
  But this folder Jack2 remains!

  Then try:

  1. Safe boot mode.
  2. Log in as Jack.
  3. Property to enter the profile folders that bothers you - see here.
  4. Rename the folders unwanted profile by adding the suffix .junk.
  5. Wait a week.
  6. If all goes well, remove the folders of .junk.

• I lost the user's profile after the execution of an update of the Microsoft Vista

  After an update from microsoft on December 18, my user profile on the computer has been lost.

  It says there was an error loading the user's profile, and that any changes made to the computer now will be lost once the computer is offline.
  For me it of more my ruined A £499 of the cell value and not good for me.

  I'm not a computer genius and don't know what I'm doing.

  Can someone tell me please know what Microsofts update to vista did and how to fix it please.

  > Can someone please advise me as to what Microsoft s for vista update did and how to fix it please.

  I think THAT the guys at Microsoft would be able to say what did the Vista update
  To be honest I m running Vista updates too, but my computer and all my profiles are not affected

  However, what you could do is to put the OS up to this early time using Vista's system restore.
  Perhaps this will help you resolve the issue.

  If not, then maybe you can manually configure your user profile

• How can I permamnetly delete the user account in Windows xp?

  How can I permamnetly delete the user account in Windows xp?

  1. 1

     Go to the control panel. There are several ways to do this, but the most common is to go to the Windows Start menu and click on "Control Panel" on the right side. Follow whatever it is more convenient for you.

     
  2. 2

     Click on "user accounts" in the window that appears. Or, you see the standard view (with lines of icons) or the display of the categories (which is explicit). Both have a shortcut to the user accounts Control Panel.

     
  3. 3

     If a control panel is not yet made, click the 'user accounts' Panel at the bottom of the window. If so, you can skip this step.

     
  4. 4

     Click the link you want to get rid of any user account.

     
  5. 5

     The next window will have a list of actions you can do for the user account, one of which will be "remove account". It is the action that you'll want to click on.

     
  6. 6

     The last window that you will see will ask you if you want to keep the soon-to-be-used user represents the files in a folder on your desktop. It's your choice here.

     
     • If you have already backed up all important data on this user account, you can safely click on 'delete files '.
     • If you do not, you must click "keep files".
  7. Kind regards
  Amith Malherbe

• I have a corrupt user profile. Windows XP. When I add a new can be the same, or should be different. And the user's profile should match the user ID?

  Corrupted user profile

  I have a corrupt user profile.  Windows XP. When I add a new can be the same, or should be different.  And the user's profile should match the user ID?

  If the profile has recently become corrupted, you can probably get the same user by performing a system restore operation:

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  Otherwise, you will need to create another user and copy your data.  The simplest procedure is here:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• Cannot load the user's profile after putting in the administrators password

  I have 3 profiles, me, my son and my cousin, they can get on their profiles but mine won't let me, when I type my password it is said to add the password for administrators who must be me, so I add my password again once and it says can not connect to the user's profile. Ive disappeared on the other accounts to restore the computer but whenever I want to do something, she comes up with my name and to add the directors once again password, so basically used let me not to do anything. Help!

  Hi jem500,

  ·         You type the correct password?

  Please see the below article mentioned on the Microsoft Policy on lost or forgotten the password.

  Microsoft's strategy concerning lost or forgotten passwords

  See also:

  Keep secure passwords - Microsoft strategy on move the passwords

• Copy the user default profile problem profile

  I am trying to copy a user profile to the default profile for all users who log on will have the same parameters as the user.
  I used the built in tool copy of profile under System Properties > advanced > settings...
  For all copies fine except some program registry keys still point to the original profile rather than the newly created on logon profile.  This seems to work without problems under XP but in Vista it fails every time.
  Is there a new way to manage default profiles, that I don't know?

  Thank you

  Kleenex82,
  Thank you for visiting the Microsoft Answers community forum.

  CopyProfile Specifies if the default user usually stored under C:\Users\Default profile is replaced with the profile of the currently logged in user. You can use this parameter to copy the settings of user profile in all user accounts created on the destination computer.

  Use the following steps to define custom user profiles:

  Connect you as the user whose profile you can customize (for example, the built-in Administrator account).

  Customize the settings of the user profile of your choice.

  Set the CopyProfile to true.

  Run the command sysprep / generalize to copy the custom default user profile user profile settings.

  All subsequent user accounts created will have the customizations that you set. For more information about Sysprep, see the Sysprep technical reference in the Kit OPK (Windows OPK) user's Guide.

  This setting does not copy the profile of the built-in Administrator, unless the built-in administrator is the currently logged-on user.

  Let us know if this was helpful, or if you need assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I permamnetly delete the user account in Windows 7?

  Former title: users - delete old

  How to remove a permanently in windows 7, users of the system

  Hello
   
   
  The steps that you must follow depends on whether your computer is on a domain or a workgroup.
  See the article below to delete the user account in Windows 7.
  Delete a user account
  http://Windows.Microsoft.com/en-us/Windows7/delete-a-user-account
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Gets the expiration of user password, any OOTB/task in IOM which disables / deletes the user automatically.

  In IOM after expiration of the user password gets after certain number of days, is there any task/project OOTB in IOM which disables / deletes the user automatically.

  Thank you

  We had to write our own task to disable the user after than XX days since

  password expiration (r2ps2)

• command racadm iDRAC7 to delete the user indexed

  iDRAC7 command racadm to delete the user indexed?

  Background: R720 using the iDRAC7, 1.57.57 firmware

  Tried to find a way to remove a user account from the DRAC interface.  You can add a new user quite easily, but it doesn't seem to be an option to delete a user.

  I searched the web and found the following RACADM command several times, line entry but it doesn't seem to work with iDRAC7...

  Syntax: racadm config-g o -i ""

  but when I tried to use this command with the NULL entry [""], it is not accepted

  PS > racadm config-g cfgUserAdmin-o cfgUserAdminUserName-i 3 «»
  ERROR: Invalid syntax. An object value must be specified.

  This ability has been removed from iDRAC7?  Is it possible to remove a user from iDRAC7?

  Update:

  Tried suggestion of Daniel by reorganizing the parameters, but unfortunately I do not have the same results.

  PS > racadm config-g cfguseradmin-i 3 o cfguseradminusername «»
  ERROR: Invalid syntax. An object value must be specified.

  However, it occurred to me that I was issuing the command in PowerShell via Windows Server 2012 OS and that could be the problem.

  I re-tried the original syntax using a SSH connection instead, and that seemed to do the trick.

  /Admin1-> racadm config-g cfgUserAdmin-o cfgUserAdminUserName-i 3 «»
  Value of the object successfully changed

  It seems that MS PowerShell interprets the entry incorrectly – maybe he uses a different character set... Note: it works via PowerShell IF you put a value (ex: 123456), he's not only the possibility of NULL value.

  Can be a value of further investigation or at least a technical note.

• How do I cancel the target account without deleting the user in the system target?

  Hello Experts,
  
  We need to know if it is possible to revoke a resource (delete account), without deleting the user in the target system.
  
  Example:
  
  UserOim1 in IOM has a resource of SAP ECC, is linked to the SAP UserSap1user.
  We need assign SAP UserSap1 user to another user of IOM UserOim2.
  So we'd like to broke the link between UserOim1 and UserSap1 (without deleting the SAP user) and then connect the SAP with UserOim2user.
  
  
  Is this possible?
  
  Best regards
  AT

  If you move a resource from one user to another, there is a process of service account for this.

  Using the API under tcUserOperationsIntf, you can use changeToServiceAccount. Next moveServiceAccount will move to the instance from one user to another, and finally chageFromServiceAccount turn off the type of service account.

  This account must really be identified as a service before all the shares of account account occur however. There should be no other reason to switch from a users account. If the account is defined as a service from the beginning account, simply attach existing adapters for the tasks of service account. They will fire instead of disable regular and delete tasks. I think that you will always have questions if the revoke occurs, and then you run these tasks because all the other tasks will be canceled State.

  -Kevin

• Process definition delete the user

  Hi all
  
  We have created Resource.For model this model resource, I added delete task so that each time the resource is revoked the request will go to the group admin system. He's going to be updated manually (setResponse) to revoked.
  
  But when I click the button remove all tasks within this resource will cancel the State and I'm not able to see the delete task in the history of the resource.
  
  
  Thank you

  You must add the task to the user to remove the tab undo of any cancelled task (usually create the task of the user). Once you do this, your task to delete the user will trigger.

• delete the user in R12

  Hi all
  
  is there a way to delete the user. It seems that I can't remove the user only to turn it off.
  
  Please advise!
  Thanks in advance.

  I agree with Tim on end date the user instead of deleting the account. However, in my view, it should be a good rename a user. All references to the user application names are based on the not the column USER_NAME and USER_ID.

• Error "cannot load the user's profile.

  user profiles

  Due to a system restore after doing this process when I tried to connect, I get a message "Unable to load the user profile" help please!

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner