Backup/restore several historic graphic waveforms

Similar Questions

• graphical waveform shortcut menu problems

  Hello

  We discovered a problem about shortcut menus on maps of waveform with our current installation of LV2009f2.

  In the development environment ("IDE"), we have created a larger application. In the display section, we have several graphics (waveform), where the user can select the signal traced by the contextual menu (aka the context menu). When running the application in the IDE so good, the menus are displayed with all of the elements, we have defined.

  So we have finished the debugging (so we thought) and created an executable. Then, we tested the executable on the same computer (the computer with IDE installed full). Everything if fine, context menus are shown as expected.

  So, we got to the next step in the creation of an installation package (which resulted in a size of 0.99 GB btw...). LabVIEW makes no complaints and we have installed this app (using the Installer) on a clean computer. No problems so far, our application has started, everything was fine. But then we tried to change the display: NO POPUPS! Instead, we had error 1165 (problems with Insert on the Menu, "Can't find the menu"). What happens here? Anyone with a clue? Where is my menu (reference)?

  OK, we had a second computer. Install this package of 0.99 GB too. From the app: just fine, except the missing context menus!

  More information:

  All computers are Windows XP, Service Pack, even. Context menus don't require no RTM file, so no missing additional files in the installation package. Menu references created by LabVIEW (IDE or RuntimeEngine [RTE]) on right mouse click on the control, so that there should be no problem with the benchmark missing or false. The values supplied to generate the menu are the same for the IDE and RTE, so no difference. The graphics are incorporated into a secondary, but still only had events for them, so we no problem. New: the reference for the menu is provided by LabVIEW (event "Activating the context menu", MenuRef), so it should be valid...

  Sorry, no example. It is difficult to reproduce, when it only happens to RTÉ and only on computers, where no IDE is installed...

  Tomorrow we will fill to the top of the VI for creating menu with a lot of debug message subVIs to check everything and everything is going on in there...

  Hi Norbert and others.:

  I found a solution for my problem (after a long session to create exe, deployment to a different computer, debugging and start all over again...).

  In deployments executable the shortcut menu for the chart is missing (and is missing only here!). So I first test a menu empty on each activation of the menu and create a new menu if necessary. To do this, you will need to turn off (disable) "default DURATION of the context menus" during the VI containing the graphic.

  A note more:

  All other paid (menus VI other) are loaded correctly, all loaded screws work dynamically. It's only the RTM shortcut missing... (And the RTM file is set to 'always include' in the application Builder!)

• SPA-3102-backup/restore settings?

  Hello

  Is there a way to backup/restore the settings to a file in the SPA-3102 router?

  ASE

  There are several ways to save the settings of the SPA3102 according to some forums - check links ff

  http://forums.whirlpool.NET.au/Forum-replies-archive.cfm/756454.html

  http://Forum.Voxilla.com/Linksys-Sipura-VoIP-support-forum/SPA3102-compiler-configuration-backup-Mon...

• What is the standard way to backup / restore the application options?

  Hello

  I was wondering what is the standard way to backup / restore application options (scenario: options backup to memory card, the user reinstall OS, reinstall app, restore options)

  I would rather not put up my own encode / decode routines if possible.

  I've seen several approaches used in real-world applications:
  * csv like data file
  * binary storage (Berry, weather)
  but I'm not aware on how they have been implemented.

  Any ideas / suggestions?

  Here's the "official" way

  http://supportforums.BlackBerry.com/T5/Java-development/backup-and-restore-small-amounts-of-data-USI...

  This works if people use Desktop Manager to switch devices.

  I think that most people will write their own serialization code to convert objects into a form of byte (as you saw csv, or own format or XML) and then put that somewhere - like your own server for application aware network or SD card.  This approach works, regardless of the method, users of user to switch devices.

• iPhone 6 s - 100% carbon copy backup/restore to iTunes - is that possible?

  Hello

  I am trying to find a way to save/restore an iPhone via iTunes installation so that the restoration of places any return on the phone with the same configuration (essentially, an exact clone of the original installation that is being backed up).

  Questions that I met with attempts to use iTunes for backup/restore:

  • Passwords and other security information do not restore.
  • Applications not getting restored
  • WIFI networks not get restored
  • attached randomly do not restore (some, not all).

  iCloud backups solve this problem (sort of).

  • It takes an internet connection takes too long and medium, and you are left without a phone can be used for a period of time, so that the restore process is complete. I'd rather do it via iTunes.
  • Passwords and other security information do not restore.

  Any help please? In the end, I'm looking for a way to backup my phone to a PC and restore it so it looks identical to how it did before the backup.

  For a long time (perhaps in the iPhone 4/5 days?) this process described above works, 100%. Apple changed something in recent years.

  Thank you

  Bob

  The backup does not contain music or apps, because they should be in the media library iTunes on your computer, and if you synchronize right after that the restoration of the backup is then reinstalled. Normally this is done automatically when you perform a restore if you not to interrupt.

  Passwords and health data are only saved if you choose encrypted backup.

  There is no way to make a backup "image" of the phone, but if you use Encrypted and let run until the end, that it will restore everything the way it was.

  See this Apple trick for some details: about backups in iCloud and iTunes - Apple Support

• I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?

  I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?

  I backed up my favorites using 'import and backup/Backup' on an external HD, installed Windows 10 and went to restore my bookmarks and noticed the file named "Firefox bookmarks-2015-09-04"had no extension and does not work."

  Please advise! Thank you! Sincerely, s

  If you add the .json extension, it works then? Why people who design browsers or extensions them do create files with no extension name, in spite that these extension names are essential to make the files can be restored? I could never understand that.

• backup/restore problems

  So, recently, my iPhone 6 had a lot of questions (most applications would be closed from the opening, I couldn't update apps, all the texts and iMessages disappeared, Messages turns uses a lot of storage despite the removal of all, etc.) and a person on one of these forums recommended to back up the phone, restore factory settings and then restore the backup to the phone. I got no problem with that, until I tried to restore the iTunes backup. When I try to do, I get the following message: "iTunes can't restore iPhone «...»» "because the backup was corrupt or not compatible with the iPhone, which is being restored. "I read that to solve this problem, I just need to delete the backup but the problem is that it's the only backup I had to restore my phone. Is there a way to recover this backup or is my only option again?

  Thank you in advance.

  It seems that the backup could have caused all the problems you had. Backup, restore factory settings and then restore the backup are a standard troubleshooting step, but if the backup is corrupt, you can not use and you can not get corrupted.

  You can restart all and try again, but I think that the results will be the same. You need to restore as new.

• "Backup restore" will restore the backup iOS version too?

  "Backup restore" will restore the backup iOS version too?

  Laughing out loud

  It will always restore the latest version of the software available

• I just got an iPhone 6 and when I plugged in my laptop, he asked if I wanted to restore my new phone. I said yes! But unfortunately chose the wrong backup restore with. Is there a way I can go back to how my phone was before?

  I just got an iPhone 6 and when I plugged in my laptop, he asked if I wanted to restore my new phone. I said yes! But unfortunately chose the wrong backup restore with. Is there a way I can go back to how my phone was before?

  Yes, you can as long as you understand that you will lose everything that is currently on the phone.

  (1) settings > General > reset > erase content and settings

  That will make the iPhone as new.  Then, during the installation process it again once will ask you if you want to restore from an existing backup.  You can then restore the scheduled backup.

• Draw text on the graphic waveform Plot

  I need to understand how to draw text on a waveform graph during execution. This could be a text box, a picture of the text, a label and an additional plot with text... etc.

  Yes, I know a graph would be better than this, but need to use a graphic for my application.

  The graph is updated every second, and new data are added to the history of the ranking. (Which means that the chart bigger every second) So if I draw the text above or behind the table, I'll have to update their location every second. I'll have to use card to XY Coords in an event, (mousedown or mouseup) to place the text (or image of the text) in the field where the user clicked.

  Step 1 to resolve this problem is to find first class, learn how to draw or text on the plot of the graph area.

  Does anyone have ideas of how this could be accomplished, or some ideas of a sneaky work around to make this work?

  Example:

  

  Unfortunately, graphics (graphic and graphic waveform XY) have support Annotation and slider, exposed programmatically through properties, but the array of waveform is not.

  What you could do is to place an indicator of 2D image that corresponds to the size of the chart above.  Make the value of the image that you draw be transparent and just print the text with transparent backgrounds.  However, I do not know the considerations on the performance of it - many times user interface elements, overlap (portions of even transparent) can cause problems of performance due to forcing redesigns... then again maybe a graph is always be redrawn in any case.

• Envelope of a waveform's graph XY and graphic waveform need

  The other threads here and here, I got great support from David and Thomas. Thank you all.

  The envelope of the signal coming out as in the example of David is as a graph XY. But as in the example of Thomas, I need graphic waveform in this format, so that i can find some of the edge values rising and falling in the waveform. Kindly suggest me how to handle this conversion. Thank you.

  Mathan

  
  

• I could do a system backup/restore through the eRecovery without any additional software utility?

  I have an Acer Aspire One 532 H Netbook. I could do a system backup/restore through the eRecovery without any extra utility of Windows 7 to Acer recovery? If I have such software, how can I get it? Because my netbook not came with any utility recovery/program when I bought it. Need to respond as soon as POSSIBLE, my netbook is dying with the longer startup time and more.

  Nice day

  You must back up your data to an external HARD disk, etc. To reload your factory machine, click Start, all programs, acer erecovery management, restoration and completely restore the factory settings.

  Kind regards

  FReeZA

• How to exit the MODE without FAILURE under XP HOME EDITION? I tried F8, Normal Mode, Reboot, restore, several times. I am registered as an administrator and it does not that no more! Thank you!

  I tried F8, Normal Mode, restore (several times), Reboot, last known good configuration, shutdown, disconnect, etc.. I'm going crazy!  I'm also signed in as an administrator and he says I'm NOT! AARRRGH!

  It looks like someone may have checked safe mode on msconfig. Back in safe mode because you cannot do anything else. Go to start/run type msconfig. Go to the BOOT. INI tab. If/SafeBoot is checked unitck, and then click OK. Then restart

• change the backup/restore disc

  can I change this disk will my backup/restore point to? He uses my external drive now even if I didn't change it. I have a laptop & cannot bet that the external drive connects or is connected.

  HI RJHinSA,
  You can go there. This is guidance on how to change to the high places.
  If you need more information, simply open help, support and type "how to make the backup.
  Change when you save your files

  When you configure your computer to automatically back up files, you specify a location where the files will be stored. You can change this location if you run out of space in the current location or you want to change the type of storage location (for example, a DVD, a hard disk on your computer or a shared folder on another computer on a network).

  1. Click to open the backup center and restoration.

  2. Click on change settings.

  3. Click on modify backup settings and follow the steps in the wizard. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Backup/restore problem: some files not restored

  My hard drive died.  Fortunately, I had a recent backup.  I managed to restore most of my files and also finally got access to my file of Microsoft Outlook data (due to gurus on these forums).

  I'm now trying to recover the data for my financial program.  I checked the files in the backup folder, and they understand the data I want to restore.  However, when I go through the restored files, I don't find them.  I try to avoid having to enter again about 1 1/2 years of data.

  The backup was performed on a laptop Dell running Vista Ultimate and was stored on a USB external drive.  It was made using the backup/restore program that comes with Vista.

  Any suggestions?

  Thank you in advance.

  I'm now moving extra files on my USB key for added security.

  I would like to know if there is an easy way to remove duplicate files that take up more space on my hard drive.

  However, the original problem is now solved.

  Thanks again.