Backup/restore problem: some files not restored

Similar Questions

• "Backup completed, but some files were ignored.

  Hello, when I backup Windows, it nearly finishes him off then the progress bar turns red and he says "backup completed, but some files were skipped" so when I discovered the ignored files it displays

  • Backup has encountered a problem during backup of the C:\Users\Mcx1-SLAYER2\Contacts file. Error: (the system cannot find the specified file. (0 x 80070002))

    Backup has encountered a problem during backup of the C:\Users\Mcx1-SLAYER2\Searches file. Error: (the system cannot find the specified file. (0 x 80070002))

    Can you please help and tell me how to solve this problem, so I can run a backup successfully?
    A full system restore will fix this problem?

  Here are a few suggestions:
  (a) reboot safe mode, and then perform the backup.
  (b) ignore the warnings. Files seem to belong to a game, that's why their loss would be of little consequence.

• (the backup completed, but some files were skipped--(0 x 80070003)) & (0 x 80070002))-Please help!

  Hey everybody...

  I tried for two days back my 64 bit Windows 7 system.  Whenever I do, I get the following messages saying the "backup completed, but some files were skipped.  (I get two error codes (0 x 80070003)) & (0 x 80070002))

  This is the description that is displayed in Notepad after the backup is performed:

  Backup has encountered a problem during backup of the file C:\Windows\System32\config\systemprofile\iJamez\Pics & Vids\Internal storage. Error: (System does not find the specified path. (0 x 80070003))

  Backup has encountered a problem during backup of the file C:\Windows\System32\config\systemprofile\iJamez\Pics & Vids. Error: (System does not find the specified path. (0 x 80070003))

  Backup has encountered a problem during backup of the C:\Users\James\Desktop\Contacts file. Error: (the system cannot find the specified file. (0 x 80070002))

  the iJamez folder is located under the folder James which is on my desk at the top of the page, that I him have also stored in my external hard drive... the order goes like this:

  PC: C:\James/iJamez/Pics & Vids

  Outer: D:\iJamez/Pics & Vids

  + Pictures and videos is I have sync it with my iPhone.

  The last line of the error is in what regards the Contacts... I installed Outlook Express and I noticed that the Contacts folder has been installed on my desktop and I deleted because I don't need.

  Is someone can you please help me understand this... It makes me crazy!

  Thanks in advance to all!

  James
  E-mail address is removed from the privacy * (please email if you directly want to advise me on how to fix this isssue)

  I SOLVED THE PROBLEM...

  What I had to do, is create a folder named "iJamez" inside:

  C:\Windows\System32\config\systemprofile

  Once I created the folder iJamez inside (see above) I then created another folder inside iJamez called Pics & Vids. Once all of these files, I did my backup worked fine. He didn't ignore any files at all.

  But of course, my only question is, why the hell did I have to create these folders in the first place? Why in the world the Vids & photos that I sync with my iPhone would have something to do with a full backup?

  I do not understand why, I am just happy it worked.

  Can anyone shed some light on why this took place?

  Thank you.

• Windows 7 backup error "the backup completed, but some files were skipped - 0x8100002F."

  Original title: error on backup windows 7 files ignored

  Have used the backup of windows 7 with no problems for several years.

  Get this error now: "the backup completed, but some files were skipped - 0x8100002F"

  Log shows:

  Backup has encountered a problem during backup of the C:\Users\HOME\Pictures\2013-08-17 file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\HOME\Pictures\2013-08-17-dup file. error: (the system cannot find the specified file. (0 x 80070002))

  Check my hard drive of the PC with windows Explorer & files above do not exist.

  Tried to change my backup settings to not have the folder of images on the home account backed up & still get the error. Store all of my photos on another account (admin account) so no need to save photos on the House.

  Please help to get rid of this annoying error.

  Hello
   
   
  This problem occurs if Windows backup ignores certain files when Windows Backup cannot find them. When you perform the backup there backup Documents, photos, music and videos through user libraries. So if Windows detects any changes in the path of the folder then the libraries do not recognize their unless you access the corresponding library via Windows Explorer.
  
  Please, try the steps in the Microsoft KB article and check if it helps.
  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7.
  http://support.Microsoft.com/kb/979281
   

  I hope this helps. If the problem persists, please answer, we will be happy to help you.

   
   

• Maintanence backup: "the backup completed, but some files were ignored.

  Hello, when I do the backup of windows, at the end I receive this note on files that have been ignored during backup "Backup has encountered a problem during backup of the file C:\Users\Rami\Saved games. Error: (the system cannot find the specified file. (0 x 80070002)) backup has encountered a problem during backup of the file C:\Users\UpdatusUser\Saved games. Error: (the system cannot find the specified file. (0 x 80070002)) ».

  Please tell us how to solve this problem.
  Thank you.
  Rami.

  Hello Rami,

  "I understand that when you perform the backup, you get the following error: the backup completed, but some files were skipped (0 x 80070002).

  I suggest you to follow the suggestions of this link and we will reply with the status.
  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281

  Hope the above information helps.

• Problem signature__Problem Event Name:_BlueScreen__OS Version:_6.0.6002.2.2.0.768.2__Locale ID:_18441____Files that help describe the problem (some files may no longer be available)__Mini092710-01.dmp__sysdata.xml__Version.txt____

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 18441

  Files helping to describe the problem (some files may be is no longer available)
  Mini092710 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: a
  BCP1: 00373DEA
  BCP2: 00000002
  BCP3: 00000000
  BCP4: 821C2F64
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL

  This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  http://msdn.Microsoft.com/en-us/library/ff560129%28VS.85%29.aspx

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  Please copy the files of the dmp to the C:\Windows\Minidump folder first on your desktop, zip dmp all in 1 zip file and download the zipfile to your Skydrive [1] and post a link here, so that I can look at landfills.

  André

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [1]

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• some files not check spelling

  Hello, I met a strange situation.

  I have some files that were created by the same user who are not misspellings in any word (for example "asdf") on the rise

  The spell checker opens, looks like it is running, but will detect no error. I also turned on the dynamic spell check, and he did not acknowledge something.

  The information found elsewhere, I checked the language settings and parameters, and they are both set correctly (English and any document, respectively)

  If I create a new file on the same workstation, it comes out very good controls. If I create a new text box in the file problem wrong identical text, it does not pick up errors.

  I have exported and imported from the transfer format, but get the same results.

  What other solutions I could look to other?

  Please let me know if there are I can provide additional information.

  Select the suspect text and look in the character or control panel. What is the language of the selected text? If it is language of no., then there is no dictionary for InDesign spell check against.

  

• Migration problem reports: file not published online

  Hello everyone!
  
  I'm doing a migration of forms and reports on the Apex, but I can not download these reports 3: I got the error "XML report not published online", as you can see here.
  
  Anyone know why this problem appears, and why only 3 reports have this problem?
  I checked all the reports, but I couldn't find any big difference between these 3 and other...
  
  
  I also have another problem with reports settings: in the XML file, I "& param ' but Apex seems not to accept it. I modified the changing XML file "& param"to": param", but it still does not work.
  How should I write the settings in the XML file?
  
  
  Thanks in advance,
  Stone

  Hi Pierre,.

  Thanks again for the redirection on your sample XML report files.

  First, the file upload issue you reported related to the XML file containing a multibyte, but the file was not coded UTF - 8. When I saved the file with UTF-8 encoding value, I then could successfully download the file to my project of Conversion of forms. I noticed that your XML file contains several elements of with the SQL statements for your report. Even if such a file can be downloaded on your forms Conversion project, project pages associated with the reports only expect a element in the file and therefore will not work correctly. As a solution, I suggest that you take a backup of your XML file, and then edit the file to remove additional items . It will only contain a single element of with the SQL statement to be used in the conversion process.

  For reports with parameters, my suggested workaround solution would be to remove the parameter of the SQL statement references, download the report and then try to convert it. If successful, an interactive report Oracle APEX is generated, based on the SQL statement from the report of the Oracle. Once the interactive report has been generated successfully, update the Oracle APEX page to include a new point (e.g. list selection) takes over the possible user parameter values. Change the source of interactive report for the new reference point. The interactive report then only display information based on the setting selected by the user. I hope this work around will allow you to continue your conversion process. Please let me know how you get on and also if you have any other problems with the conversion process.

  Kind regards
  Hilary

• Installation problem 5610 - file not found

  My 5610 on Windows 7 64 bit don't scan, so uninstalled the Solution Center and printer and tried to reinstall the driver and software.  It fails by giving a file not found error for the following file:

  C:\Useres\Sam\Appdata\Local\Temp\7zS18AD\Setup\Setup\...\Blocksysuserinsta

  How can I fix?

  No, it's not worth it and the new printer is already installed and working properly.  It took about an hour or less of closed box to operational.

  Besides, why would I need two printers that have the same functionality on the same computer.

• Bookmark backup saved as type 'File' not JSON. How can I get my favorites?

  Recently, I did a reinstall of Firefox. Before uninstalling, I made a backup of my favorites. I don't remember asking for file type, when I made the backup... I guess Firefox would use correct. When I tried to restore the backup after you install the latest version of Firefox, I got the message "Unsupported file type". I looked at my file extension. There is no extension, and it just says: 'File' file type. It is certainly not JSON. Now, I am at a loss as to what to do and how to get back my bookmarks. I must have 50 +. Help, please!

  First of all, if Windows HIDES extensions file on your part, you can change this setting. In Windows Explorer, you can access the option using one of these:

  Organize the menu drop down > folder options and research > view tab or
  
  (Alt + t) tools > Folder Options > view tab

  Disable "Hide extensions of known file types".

  If you return to your file, you should be able to change the .json extension, and then try again. Not sure if it is critical, but by default, Firefox seems to create an extension to lower case (json not JSON).

• Learn more about some files not not not synchronize

  Cloud creative menu bar icon was a triangle of red alert, so I opened it. Assets > files area wanted the attention. At the bottom it said "some cannot synchronize files" with a link to «Read more»

  I click on the link, but I'm delivered to a web page that doesn't quite answer the question.

  What are the files failed to sync? Why?

  

  Thank you. The location of the log file was suggested in this thread was not where are my log files. On my system, newspapers CoreSync files * are found in the ~/Logs

  Looking through the newspaper "fail" message, it seems, the problem was the connectivity to the server.

  Thank you. Feature request would be to make the error message more informative.

• iPhone backup fails with "required file not found."

  Basics:

  OS X 10.11.4. I have

  iPhone 6 + ios 9.3.1

  iTunes 12.3.3.17

  Photos 1.5

  Once I plugged my iPhone in my iMac (2010), I get the following message is displayed:

  'Failed attempt to copy to the disk "Macintosh HD". Required folder cannot be found. »

  The backup process seems to cling ' step 7: prepare copy items. "

  I haven't moved my Photos or music from their default locations, libraries.

  I see a lot of people have reported this problem, but no solutions.

  Hi pmcgeary,

  Please visit Apple support communities.

  If the backup of your iPhone using iTunes is not finished, don't forget to try steps 1-2 and 4-6 in the following troubleshooting guide: If you can not make a backup of your iPhone, iPad, or iPod touch iTunes.

  Sincerely.

• Some files not viewable in Bridge CS4, showing only icons

  This is not new, but I finally got to the point where I'm pretty embarrassed to write. I am browsing files with .tif, Illustrator and Photoshop files and preview files, and some simply show the icon for the file type. What must happen for me to be able to get an overview of ALL files in the folder, I am browsing? BTW, it's not just this file - it has happened with other cases and it seems to be meaningless for her - some records I navigate everything appears, others only a few preview files and others are as described above. Thanks for the tips...

  I would go in tools/cache/purge cache for folder xxx.  Let the thumbs to rebuild and see how it acts.  It is best not to start a new action until the wheel that runs down to the right stop to indicate that it is finished.

• some files not migrate using advanced migration

  I needed to migrate a single data store to another volume.  I used the Advanced Options button when you select the store data and specified the new volume and the volume of hard moved very well.  He mistakes that I saw.  However, there are still several files on the old data store.

  < vmname > (pr.vmsd

  < vmname > (pr.a76bf426.vswp

  < vmname > (pr.nvram

  < vmname > (pr.vmxf

  < vmname >(pr-a76bf426.hlog)

  < vmname > (pr.vmx

  VMware.log

  What should I do with these files?

  Hi Tom,

  Change your data store for configuration and files (to advance)?

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• "Some files to sync failed" error, but "creative cloud works normally. What should I do?

  CC gives me an error "some files not has not not synchronize", but when you click on the link, it takes me to https://status.creativecloud.com/ who says that everything is working normally. So why give me an error, but no solution? Why don't synchronize my files? How dio I solve this problem?

  If you're on MAC, open the utilities activity monitor.

  Then check if you get coresync is not responding error.

  Exit Office Coresyc also leave cloud creative Activity Monitor

  then restart and check.