backup Windows says that it cannot read backup disc

Similar Questions

• When I place a disc in my CD - DVD player, it says that it cannot read the media.

  I use a Windows 7 computer and everytime I put a DVD in the drive, it says that it cannot read the disk media. I tried to uninstall and reinstall it, I also tried the Player update. The computer realizes that the drive is in the computer, but it will not play any DVD or CD. Anyone know how I can get running without having to disassemble the computer?

  Clean the disc with a DVD cleaning disc, available in most stores and retail businesses.  If this fails so that the reader has probably not and must be replaced.

• When I try to update to Firefox, I get a window saying that it cannot be loaded because I don't have all the necessary permissions. What do this mean and what do I do?

  When I try to update to Firefox, I get a window saying that it cannot be loaded because I don't have all the necessary permissions. What do this mean and what do I do?

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop DMG

  • Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• opening word or excel gets document dialogue window saying that it cannot be opened unless a program is designated. Never been necessary before

  Opening existing documents from my hard drive or e-mail attachments in Word or Excel in is no longer a simple click. Now download small window saying windows cannot open it unless I have it or look for an appropriate program or select a program myself.  I see no reason for that, unless there has been a recent update kind. Or is there a setting that has been changed by mistake on my computer?

  Thank you

  bonydog

  It is a simple case of the computer, forgetting what should be used to open the file.

  Attention that I am working on a victory 8 atm machine and these instructions cannot be perfectly describes

  If you go to start > Control Panel > default applications (may be slightly different) > chose the 'extension' (IE 'doc' for a word document) or xls for excel and find the appropriate application to open it.

• in lightroom 5, I was importing images via a card reader. Now you can see the images on the computer but when I try to import it says that it cannot read the card of ideas how to fix?

  I was importing images via reader of card without problems. Now, all of a sudden, I can see the images on the screen, but when I try to import the computer says it cannot read and quote the numbers of images. No idea how to fix?

  Please give us the exact error message.

  Please indicate your operating system.

  Please indicate the exact version of Lightroom you use.

  Please give us any other relevant details.

  -What this means: "now, all of a sudden, I can see the images on the screen? You are looking in Lightroom or your operating system or the screen of the device? Where?

• Not possible to burn a DVD-tells me that it cannot read the disc

  What do I need to get windows or any other media player to burn a dvd movie cause that he told me that it can not read the disc. If someone can tell me what I please

  The only version of XP that included the possibility of creating a
  DVD-video is Windows XP Media Center Edition 2005.
  What has been consulted through Windows Movie Maker and
  was not shown to be extremely reliable.

  Beyond that... you need DVD Authoring software. The
  following freeware is an example:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to a folder on your hard drive and
  install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• I used my iMac as a hard drive backup to my macbook once. Now when I update to El Capitan he says that it cannot be updated due to being of a backup. How do I change the drive mode so I can update?

  I used my iMac as a hard drive backup to my macbook once. Now when I update to El Capitan he says that it cannot be updated due to being of a backup. How do I change the drive mode so I can update?

  If you use your iMac as a backup to disk using Time Machine look for a folder called Backups.backupdb.

  It's what keeps you upgraded your operating system, you must remove it.

  Copy everything first if you are on a different drive. It would be wise to create a backup of the iMac on another drive also.

  Check system preferences > Time Machine and make sure that the iMac is not selected as the Time Machine drive.

• The error that says it cannot read the disc.

  I installed a CD using Windows Media Player AutoPlay as my default for audio CD the 1st song plays, but when I select the next song, I get a red X icon and an error saying the disc cannot be read and it climbs to the 3rd song. So, if I select another song, I get several red X icons on several songs. It happens with all prerecorded CDs that I install. The disks are clean and new and everything worked fine before, but I had my Windows Vista Home Premium reloaded recently. I don't remember if the player has worked properly for reloading. Why can it read well enough to still play some songs if it cannot read the disc. I'm getting confused. Can someone help me sort through this and help me make it work? I'm not too computer, so be gentle. Thank you... Dave

  I installed a CD using Windows Media Player AutoPlay as my default for audio CD the 1st song plays, but when I select the next song, I get a red X icon and an error saying the disc cannot be read and it climbs to the 3rd song. So, if I select another song, I get several red X icons on several songs. It happens with all prerecorded CDs that I install. The disks are clean and new and everything worked fine before, but I had my Windows Vista Home Premium reloaded recently. I don't remember if the player has worked properly for reloading. Why can it read well enough to still play some songs if it cannot read the disc. I'm getting confused. Can someone help me sort through this and help me make it work? I'm not too computer, so be gentle. Thank you... Dave

  =====================================
  Intermittent problems can be complicated to solve but it
  seems that you have a hardware problem with the
  optical drive. The player may require, cleaning service
  or replacement.

• When I click on Windows Update, he says that he cannot work and maybe I have to restart the computer.

  Hi, when I click on Windows Update it says that he cannot work and maybe I have to restart the computer. But when I do it always appears with the same. In services, it is configured to automatically update windows and is started. Can anyone help?

  Hello

  
  Method 1:
  You can run the fixit. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  Method 2:
  You can run the fix provided in the link and check out them.
  Resolve security issues to protect and secure Windows automatically
  http://support.Microsoft.com/mats/windows_security_diagnostic/
  Method 3:
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Note: if bad sectors are found by running the check disk utility and if the attempt to recover bad sectors is verified when checking the disk for errors, data in the bad sector might be lost in the attempt to recover bad sectors.
  Method 4:
  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.
  See also:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
  It will be useful.

• My PDF now appear like MS Edge.  I tried to reinstall AR A-Reader and pointing to my PDF.  Dialog says that he cannot do

  My PDF now appear like MS Edge.  I tried to reinstall AR A-Reader and pointing to my PDF.  Dialog says that he cannot do

  How can I get held hostage on this and go back to Adobe Reader?  This happened only recently, I put in 10 MS several months ago.

  Hi John,.

  Please try this fix: Reader/Acrobat is not the default PDF owner | Windows 10 threshold 2

  Thank you

  Abhishek

• I've just upgraded to Adobe reader DC and now I can't save PDFs. really really frustrated. Says that it cannot connect to a DDE server.

  I've just upgraded to Adobe reader DC and now I can't save PDFs. really really frustrated. Says that it cannot connect to a DDE server.

  In previous versions of reader, a small change in the Windows registry fixed this problem.  I don't know if this still works for CD player, but it is interesting to try: download, unzip, then run the registry script from https://files.acrobat.com/a/preview/aa605eb3-5973-4cab-85d0-dea22fb92680

  It will make the following change to the registry:

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\acrobat\shell\open\ddeexec\application]

  @="AcroViewR10"

• Windows XP Professional Setup copy iaStor.sys then the OS says that it cannot copy the file iaStor.sys.

  After the RAID 0 disk partitioning, installing Windows says it will copy the files in the file system. The first file is iaStor.sys. My SATA CD drive runs for a few seconds, then there is a long pause, then the OS says that it cannot copy the file iaStor.sys. He goes on to say that I should check that there is a CD in the drive. Any ideas?

  Here's the solution to this problem:

  1. in the disk driver (a:\) root directory create a directory called holiday of $ $OEM existing files as they are, we will not delete or replace anything.

  2. in the directory $ $OEM you have created, create another directory called TEXTMODE

  3. copy all the driver files located in the root directory to the A:\$OEM$\TEXTMODE subdirectory, try to reinstall, it should now work.

• My MSN Premium account is constantly stopped working and it closed its doors. I tried to go to Microsoft Fix - It, but it says that it cannot access with the program I have. I use Windows 7.

  My MSN Premium or constantly stop itself or takes forever to finally adjust to I can use it. I tried to go to the Microsoft Fix It, with the help of MSN Premium and I get a message saying that it cannot connect with the program that I use. I have Windows 7. If I connect to my Hotmail account, I have no problem there, but MSN Premium is something that I pay for, want to use it, but doesn't seem to work as well.

  Hi Nancy,.

  Because the problem is with MSN premium I suggest you to contact MSN support for help.

  https://support.MSN.com/default.aspx?scrx=1

  I hope that helps!

• I received a phone call from someone claiming to be windows saying that my computer has been infected.

  only, I was contacted by a person claiming to be windows saying that my computer has been infected and he called for help.  He hit me the windows and "R" key at the same time.  Then I typed in "eventvwr" and who showed me a list of some events with indicator red and yellow.  Then he wanted me to go back and enter "iexplore www.support.me", so he could fix my computer.  I became very suspicios and did not continue with his appeal.  Is it a hoax or someone really trying to help me?  Because I did not communicate with him, I feel that this is not a legitimate operation.  Thanks for your help.

  original title: telephone call from Windows?

  Hello

  It's a scam.

  Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  We have all the errors and warnings in our Event Viewer

  That's what you do if you never give them remote access.

  If you gave them remote access and you do Internet banking, contact your bank, explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  See you soon.

• DEP DEP is triggered when I try to use MSWorks. When I try to disable it for this app it says that it cannot be disabled

  DEP

  DEP is triggered when I try to use MSWorks.  This has just begun.  When I try to disable it for this app it says that it cannot be disabled.  What is going on?

  Try this:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  Above is a tutorial on how to turn off DEP for a particular program.

  See you soon.

  Mick Murphy - Microsoft partner