Backups.BackupDB is not found!

Similar Questions

• Backup failed with error 18: the backup drive is not found

  Hello

  My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.

  So far I have tried:

  -Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac

  -Remove TimeMachine.plist and restart my mac

  -Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).

  I share this time capsule with my wife and she has no problem with that.

  I can only think of a possible alternation I did which could cause this problem.

  Because of unstable WiFi problem, I had deleted

  com Apple.Airport.Preferences.plist

  com.Apple.Network.identification.plist

  NetworkInterfaces.plist

  Preferences.plist

  or other files and reboot my mac * before * I had this problem with time capsule.

  However, this is not the first time I do it, and it wasn't a problem before...

  This could be the reason? If so, how to restore the network settings?

  Please help me with this problem. Really appreciate!

  Ted

  Here is a copy of the Console:

  24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)

  24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.

  24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21

  24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  What model is the TC?

  Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.

  (You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).

  Also give me some screenshots of the TC installing airport utility.

  Can you get it in the Finder?

• Error - backup file is not found or is not the file you requested.

  Original title: restoration of Windows XP utility gives "file not found error.

  Hello
  I have Windows XP SP3 on my system. I tried to restore my backup file I had created a few months back. and I get the following error:
  "Backup file is not found or is not the file you requested.
  even though I am pointing to the correct file.

  It is possible (although I'm not sure) can I have left my backup file a different location for a more current. However, in the Restore Wizard, I'm still that it points to the current file.

  I followed the instructions of Dena in the following post:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cannot-restore-files-from-computer-backup-on/4c3ac6eb-c8f5-4DB9-BA56-e158e057f828

  However, it does not help. When I try to catalog them by following the steps, an hourglass appears, but there is no algorithmic activity event. So if I move my mouse even slightly, the hourglass disappears and is replaced by the pointer. Then when I try to work with the backup file, I get the same error as above.

  Please help me with this restoration! There is a huge amount of data which suddenly went 'pfoosh' one morning. people say we should have backups for buffering against these events, but a pity that my backup doesn't even work! Help, please! I would really appreciate it.

  Thank you

  Hello

  ·         You receive a specific error with the error code: "the backup file is not found or is not the file you requested"?

  ·         Is the backup stored locally or on an external drive?

  You try to run chkdsk on the drive that contains the backup. Later, check to see if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer

• Time Machine could not complete the backup-backup drive is not found

  I get a message...

  "Time machine could not complete the backup to Time Capsule

  I can't find the backup disk. Make sure that the backup disk is connected, or select a different backup disk. »

  I have not had this problem before, it's all connected...

  If you have not already made a comprehensive network feeding cycle, it would be a good basic troubleshooting step.

  To turn off some appliances, you actually pull the plug on the appliance.

  Turn off all devices on your network, computers, routers, modem, printers, mobile devices, etc... in any order you want

  Wait a minute

  Turn on the modem and let it run for 2-3 minutes by itself

  Switch on the device connected to a modem and let run for a minute

  Keep turn on devices one at a time about a minute apart, until the entire network is back

  Try a backup

  Report on the results

• Pavillion g7 notebook: 8 not found windows system image

  I tried to create a dual-boot system, and it failed. So, I ordered the hp recovery DVD and recovered my system windows 8. I had created a system image recovery composed of 6 DVDs. I wanted to restore my pc using the system image, I created, but any method I followed, Recovery Manager Windows 8 can't see or locate a system image. I tried to insert both the last drive of the game according to the instructions and even tried the first disk without success.

  I am a pc repair technician and I'm frustrated because I will lose a lot of programs and files that I use in my business. Is there by chance a way to manually restore the files and programs the system image dvd?

  How in the world of windows 8 can't see what image system created? I have read that the system image is saved as files dvx and have read that are stored in the format: drive letter: \WindowsImageBackup\computer nameYYYY-MM-DD HHMMSS \Backup, but have not found these on my box dvd of restoration image I created.
  

  PLEASE SKIP THIS QUESTION! I HAVE HP SYSTEM RECOVERY DVD SET, NOT A PICTURE. SORRY!

  H @eqnx97,

  Welcome to the HP Forums!

  It's a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that you have difficulties when you try to create a system dual boot, and it failed.  You ordered a set of recovery disc to return your laptop to factory.  You thought it was a recovery image and a difficulty to do the recovery and now realize they are recovery disks and not an image.

  Here are two links to guide you through the recovery process.

  HP computers - performing a recovery of HP (Windows 8) system

  HP PC - troubleshooting (Windows 8) HP system recovery problems

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

  Good luck!

• File not found error when opening a virtual machine (from No-Time Machine backup)

  Hello world

  I have a problem with my installation of Fusion 2.0.6 on my iMac to Snow Leopard related to a "file not found".  I did my best to analyze the positions of the community to see if anyone has experienced this before.  I found several posts and tried the suggestions in these posts, but I have not been able to solve.

  I'm trying to restore from a full backup of my XP VM. It's not a backup Time Machine; just a straight backup of VM together using SuperDuper (part of my nightly backup routine).  To restore, I copied:

  -> BACKUP/users/John/Documents/Virtual Machines/Windows XP Home Edition.vmwarevm

  for -> MacHD/users/John/Documents/Virtual Machines/Windows XP Home Edition.vmwarevm

  Merge, I opened the Windows XP Home Edition VM, only to get the error:

  «File not found: Windows XP Home Edition-000005 - s001.vmdk.» This file is required to power on this virtual machine.  If this file has been moved, please provide its new location. »

  I find the file hard (what is there) and get the same error message several times.

  Interestingly, when I try to open the same VM from the backup location, I also get the same error.

  Really stuck now and don't know what to do.  Any help that can be provided would be greatly appreciated.

  Thank you

  John

  It seems that the latest files are missing. The virtual disk which I guess has a size 5-6 GB provisioned consists of 3 files, of which 2 are missing for snapshot 000005 (Windows XP Home Edition-000005 - s002.vmdk and Windows XP Home Edition-000005 - s003.vmdk). Unless you have some backup, your options are limited and you will need to go back to the last instant whis is dated March 2012.

  Windows XP Home Edition - 000005.vmdk descriptor file (text file) will show the files that make up the virtual disk (the Flash disk in this case).

  André

• error AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library

  I tried to update my iTunes this weekend.  Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer.  I tried to re - install outside of iTunes and repair.  But no luck.  Should I uninstall iTune and then re-install?  Help.

  These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in

  • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
  • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  where the name of the Program Files folder may vary depending on the region.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• Device not found Airport Extreme

  We have an airport extreme connected generation via Ethernet to a switch that provides network access to our entire House (about 10-15 connections) via wifi access points all Ethernet hard wired (linksys + apple) and a direct wire to a PC. Airport extreme is the dhcp and is connected to a gpon fiber using PPPoE.

  The problem now is that the AirPort Extreme disappears from the airport on iOS Mac utility and Windows, it is found however the network and the Internet continues to operate normally on all connected devices. I can also continue ping on the router.

  I have reset the AirPort Extreme to the default settings, but the problem continued...

  I tried to unplug all devices and have AirPort Extreme only connected to him have the fiber but the problem persists...

  no idea how I can fix this problem?

  You describe a known problem with Back to My Mac which first appeared around July 13. The problem manifests itself in a message "Device not found" meant to be displayed in triangular AirPort your AirPort base station with a yellow icon utility, while the router of the device functions others continue to work normally.

  If you use an airport Time Capsule, backups will not work using that device or USB hard drive units connected to it.

  Apple will only be able to solve this problem, so all you can do is wait for them to do. If you want to contact them to tell them about it, using the contact Support link.

  There is a solution: on a Mac, open AirPort Utility and select file > configure other...

  For each of your routers Apple AirPort Base Stations serving their respective networks: its IP address and password (if you don't know either of them, read the Note that follows the horizontal rule below). Then, on the tab of the Basic Station , delete all the entries in the Back to My Mac using the 'negative' button, then click on Update.

  Which must be re-established appearance of this base station in AirPort Utility, as well as in a side bar of the Finder, if all shared disks are plugged on. It will also restore possibility of Time Machine to save on these discs, if this has also been a problem for you.

  If this seems to imply that you will not be able to use Back to My Mac until Apple fixes it, you are probably right. Well to diagnose problems of the CCMM is tedious work that I have not yet finished.

  Apple does not participate on this site except in a very limited way, so don't expect is not a response from them, here or elsewhere for that matter. We'll just have to wait for them to fix it.

• Airport devices not found

  Hello! I have two devices from the airport: on the one hand at home and a time in my lab Capsule. I was away for 20 days and yesterday, when I came back, there was a problem with the two: my Mac cannot access these devices, they can connect to wifi networks hosted by them. When I try to access these devices via Airport utility, I get the error message "device not found". This message, both at home and in the laboratory, tells me that the device was part of my network before, and that I should check if it is within its range. There is an option to 'forget the device' in the end. It is quite strange, as other Mac networking for my laboratory do their backups normally during my absence. Could you please help me? Thank you.

  This was reported once many here recently.

  A 'solution' refers to those who have set up their base stations for Back to My Mac. If you did, how to follow recommended action is temporarily remove or disable this option, as follows:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
    • Note: You may need to use the option "configure others...". "to access the base station. Enter the IP address of the base station, the default value is: 10.0.1.1 and base station administrator password when you are prompted.
  • On the tab of the Base Station, go back to the section of my Mac at the bottom of the window.
  • If you have entries here, select it and click then the minus sign "-" button to remove it.
  • Click on update and allow the base station restart.

• Why do I see "device not found" airport Admin?

  I have an AirPort extreme and my parents have a TimeCapsule. They are both showing the message "device not found" in the administration of the airport. We tried cycling power etc. Our networks still work, however we can not connect to manage and backups of my parents stopped. Is anyone else seeing this?

  

  You have Back to My Mac configured on your AirPort Extreme? If so, disable it.

  This issue was widespread in the last days. We are all waiting for an answer / difficulty of Apple.

• Device not found, but internet work

  I have an Airport extreme with a capsule 2 TB that I use as a backup file.

  All of a sudden I can't connect to the airport time capsule. When I launch the airport utility, there is an orange triangle/exclamation point that fits the description "device not found". The router works well, since I am connected to internet (at this time).

  I tried to unplug the unit and time capsule comes back for about 2-3 minutes until the same problem occurs again. Factory of Soft and hard resets produce the same results. I know this isn't my macbook pro because it does the same thing on my phone as well.

  You have Back to My Mac configured on the TC with your AppleID?

  This has happened to me and when I removed my AppleID and disabled Back to My Mac it ceased to occur and the TC became visible again.

  I hope that Apple will fix this soon but it would pay record a call of support with Apple on this topic as well.

• BOOTMGR not found - cannot start Windows

  I have a similar problem...

  Start the computer and I get:-BOOTMGR not found... Press Ctrl + Alt + Del

  I put the Toshiba recovery disc in and it registered no operating system... I finally gave up and removed the completely hardrive and tried to install the backup disk... now I have a disk backup who thinks the computer is empty, a Toshiba Recovery disk which does list not all operating systems and asks me to install the drivers... which of course - I don't have an operating system disk that we are not given when we buy the computer...

  I have nothing more than a silly recovery disk which is not useful to the plastic that it is written on... and a computer which has nothing on the hard drive and no operating system to all the...

  I was thinking of buying another drive in Vista or maybe a new windows 7 one... but what guarrantee do I think it will work...? I could spend $ 500 for no results...

  I searched the internet for months looking for an answer, and everyone seems to mean the same thing... Operating the drive should be issued when the computer is purchased...

  Jaz

  Hi Jaz70,

  First of all, it would be interesting to know if another disc would work. Perhaps your CD/DVD drive doesn t work properly so she wouldn t read any type of disc.
  Check this box!

  In addition, you can try to clean the disc or let's say the lens using a microfibre cloth. Sometimes it works

  If you buy a Microsoft Windows disk it won't cost $500. ;)
  These discs are not so expensive.

• Satellite M70 151: message: not found or corrupt ntoskrnl.exe

  Hello

  Since I am not native English, I try to explain my problem as exactly as possible:

  I've used this laptop for XP Prof. two days there are about 1 1/2 years, I did my full weekly
  all partitions with acronis true image backup.

  Yesterday, I had the following problem:
  BIOS showed RAM, HDD etc work, and then I thought: 'not found ntoskrnl.exe or damaged, please install '.
  a new copy"wow...

  The same in safe mode. My acronis rescue cd didn't start, a knoppix and linux cd does not start.
  and even trying to boot from my XP cd: 'error in txtsetp.sif, cannot continue. " BTW, all the
  CD dΘmarrez well on another xp laptop.

  Someone have an idea, or should I say goodbye to my laptop?

  Sincerely, Noelle

  [Edited by: admin]

  Hello

  might be possible that the RAM is faulty. Already tried a RAMtest with Memtest86? These things happen when the HARD or the RAM disk is defective. It sounds like a hardware problem, so I suggest you to bring your machine to an authorized service partner.
  Here is a link if you don t find a servicepartner:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
  (Toshiba support - global ASP Locator)

  Welcome and good luck

• SSD upgrade failed - not found boot drive

  I need your help guys... I've been everywhere on the net, try different methods to clone my Windows 7 for SSD and failed repeatedly.

  Here is my setup, I have a HP Envy 14 with a 500 GB HARD drive. I bought an SSD to speed things up.  I have 2 OS (dual boot),

  Win7 and win 8, on which Win8 is the default operating system (according to the news of easyBCD).   I just want to clone the Win7 OS part.

  (Win7 - C drive), (Win8 - F drive) and recovery on the D drive.

  I tried these t hings upafter the defragmentation and backup)

  1. While on Win7, I created a copy of the image, but strangely, thought, once the process is complete the copy of the image is Win8

  I've used EaseUs to do backup and clone Drive C

  Swapped with the SSD HARD drive and got a message could not find a boot disk

  2. because I failed on the first try, I formatted the SSD and opt instead for a new installation.

  -J' I downloaded the ISO of Win7, swapped the (empty) SSD newly formatted

  -Started on the Win7 Installer, and have the operating system installed on the SSD.

  -J' thought that I was until I noticed assigned HP keys do not work, the USB drivers do not work, I could not turn on/off wifi. The reason may be the missing drivers (bloatware since the HP recovery disk - given that I didn't copy that one)

  3. after the attempts, I formatted the SSD drive. I read somewhere to use the HP recovery instead.

  -J' cloned the disc to my HDD to the SSD HP recovery

  -Swapped with the SSD HARD drive

  -Started my laptop and not found boot drive... (even after pressing F11)

  can you tell me a better way to do it?   Or if someone could point out what I did wrong, or perhaps missed?  Really appreaciate... This was bugs me for the last days...

  Hello wawipack,

  Welcome to the HP Forums! I hope you enjoy your experience!

  I understand that you're having trouble to locate the boot device. I'll do what I can to help you! To start, make sure that you have tried all the steps in this document from HP: Solve Boot Device Error Message not

  If this does not help, I suggest to do a reinstall of HP standard on the SSD. Once done, do a restore to a previous image in the OS Windows, is not using any bootable media.

  These steps should help get back you on track. Please provide your results. Thanks for choosing the HP Forums. Have a great day!

  Mario

• "operating system not found '.

  When I turn on my laptop I see regularly "OS not found". I turn it off and try again and usually my computer starts correctly. It sometimes takes 2 or 3 attempts before it starts up.
  
  What is the cause and what can do?

  The model is HP G6060EA Notebook.

  Sometimes the full test can correct minor errors on the hard drive. If it is put into operation correctly everything is ok for now, but don't be surprised to see it again on the road. Once a hard drive starts to make mistakes, it is only a matter of time.

  If you have your made recovery set and the backups of files on external hard drive, CD/DVD, etc., you are ready.