Backups of Server 2008 R2 running slowly after deleting failed drive and adding new USB drive replacement
We had a disk which is used for our backups on one of our servers using a USB docking station.
(We use 5 x external hard drives for our backup schedule).
I removed the defective drive and added a new using the correct wbadmin command.
Now, everything works fine except that the backup now ends at 0831 considering that with the old disk, it would end to 0600.
There is no any difference about this disc is in the USB docking station - it's just to take 2.5 hours more than previously on all players.
Starting backup to 2100.
What can I do to bring it back up to its initial speed?
Thanks in advance,
Dave
This issue is beyond the scope of this site and must be placed on Technet or MSDN
Tags: Windows
Similar Questions
-
Cannot initialize the Windows Server backup on Server 2008 R2
Hello
I searched around for a bit now to try to find a solution to my mistake, but so far have turned up empty-handed.
Operating system: Windows Server 2008 R2
Objective:
To obtain Windows Server Backup works then I can start my server backups.Problem 1:
When you try to start Windows Server Backup through Server Manager interface, I'm greeted with the following error:A fatal error occurred during an operation of the snap-in (wbadmin.msc) Windows Server backup.
Error details: Server execution failedClose wbadmin.msc and then restart it.
Outcome 1: Looking Me wbadmin Gets the #2 problem...
Problem 2:
Apparently, block level backup engine server was not active. When you try to start the block level backup engine Service, I get this:Windows could not start the service block level Backup Engine Server on the Local computer.
0x800700b7 error: cannot create a file when that file already exists.Outcome 2: No idea where to go from here.
Problem 3:
Open the cmd prompt as administrator, I type in what follows to see what I get: net start wbengineAnd get...
The block level backup engine Service service starts.
Block level backup engine Service service could not be started.A system error has occurred.
183 system error has occurred.
Cannot create a file when that file already exists.
Result 3: No idea how this started.
So, I find myself thinking about the following: block level Backup Engine Server must be running in order for wbadmin work properly. However, as I can't start the WBEngine, it is here where I am currently.
If someone has an idea or could tell me what I should do to get this working, it would be greatly appreciated. I can give more information if necessary.
Thank you.
Here is the Vista Forums.
http://www.Microsoft.com/windowsserver2008/en/us/community.aspx
Community Server at the link above.
http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx
Link to forums.
See you soon. Mick Murphy - Microsoft partner
-
2012 MacBook Pro running slowly after installation of el capitan
I saw this post made by many people many times - that their computer started running slowly after the installation of the el capitan. I tried to read every post I could on this topic, and I can't find the solutions. I was told that it could be everything from upgrading ram and an SSD hard drive, to the delivery of programs to remove the adware. In the end, I can't understand why it runs very slowly now, the only change has been the upgrade to el capitan, otherwise everything went much before. If someone knows a way to understand the problem or to find a solution that would be amazing!
Download and view a report of Etrecheck:
http://www.etresoft.com/etrecheck
Ciao.
-
Urgent please give me a Solution. I want to take backup of Active directory in Server 2008, Enterprise Edition. and I want to use this backup in Server 2008 R2. is this possible? If possible tell me that the process .it is a domain controller. If there is any tool? answer me. Thanks in advance.
That you were previously informed
Please post your question in Server TechNet Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
Don
-
Original title: Server 2008
How to value scheduled backup in Server 2008 external storage device as an external HARD disk.
This issue is beyond the scope of this site and must be placed on Technet or MSDN
-
Need help, Windows Server 2008 r2, some registry files deleted by mistake
In the editor to register Windows Server 2008 r2 by mistake I deleted some files in the windows registry, and after this Server does not start, please help is it possible to repair the registry or recover the server. and also I did not recover the system image.
concerning
SudarshanPost in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
When trying to install Windows Server 2008 R2 (which is 64-bit only btw) and error saying: the CD/DVD device driver is missing (as per joint). This prevents the installation to continue.
The virtual machine is configured as:
VM hardware version 7, Windows Server 2008 R2 64-bit experimental on ESX4. Tried the passthrough and emulatation for cd player.
This creation by vCenter4 on an ESX4 host.
Has anyone got the full version still works?
Andy
VCP / vExpert / MCP / MCTS / TCSP / BSc (Hons)
For help, Guides and how Tos, visit http://www.vmadmin.co.uk/
If you have found this information useful please give points by using the buttons at the top of the page accordingly.
Hello.
How did you get the media? It works on other physical servers? I came across this problem with the RTM version, and it turned out to be a corrupt ISO.
Good luck!
-
Could not open key
How can I give me access to a registry key? I am trying to install a scanner treated after installation failed previously and I get message "could not open key: UNKNOWN\Components\AFlE7E2767BA2BB41B713A00FB8FACC4\4D7CB2A83D7A5D543B2D9374815CC314.» Verify that you have sufficient access to that key...Click Start, type: regedit
Click with the right button on regedit
Click on run as administrator
Make sure that you back up your Windows registry database before you try:
How to make a backup of the registry in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry -
laptop power on password after 3 failed attempts and says system disable 15908722.
Hello
Please enter:
00660304
Kind regards.
-
VI run slowly after a specific time
Hello
I have a VI that reads data via an arduino Mega Board UART port.
I have a problem and I don't know how to deal: when I run first time the VI his works very good, but if I let him to run minimized (for example one hour) and after I tried to see the VI and make tweaks (enlarge the window) its very difficult to deal with it, its frozen sometimes get and sometimes his slowly moving. Anyone have any idea of this problem?The system configuration:
OS: W10 (8 GB of ram and i7 processor) 64-bit
LabVIEW 2015 64 bit
PS: if I can post my VI, but I know this problem with the other screws.
Thank you in advance,
Vlad
-
Hello
I have a guest of Windows Server 2008 Enterprise (x 64) running on ESXi 4.1 with a vSphere Enterprise license 4. I believe that the comments and hypervisor should be allowed for and support 8 virtual processors, but when I add more than 4 and try to turn on the virtual machine, I get "market of the VM [virtual computer name] Virtual machine has 8 virtual processors but the host only supports 4. The number of virtual processors can be limited by the selected guest OS for the virtual machine or the granting of licenses for the host".
The selected guest OS is 'Microsoft Windows Server 2008 (64-bit)'. There is no option in the drop down menu to 2008, Enterprise Edition.
This configuration is actually supported? If so, what should I do to get it working?
Thanks in advance,
Matt
Hi Matt.
.. .on ESXi 4.1 with a vSphere Enterprise license 4...
For vSphere 4, you need an Enterprise Plus license if want to create 8 vCPU VMs.
In vSphere 5 will do a license.../ Rubeck
-
Microsoft SQL Server 2008 Service Pack 3 (KB2546951) update fails
Running automatic updates, I get the following error:
Some updates could not be installed, Microsoft SQL Server 2008 Service Pack 3 (KB2546951)
Installation of Microsoft SQL Server 2008 Service Pack 3 (KB2546951) fails.
OS - Microsoft Windows XP Professional Version 2002 SP 3
Ran Microsoft Fix It, he did fix something. I have re-run the update and it has not yet, Microsoft Fix, he returned upward with a message that nothiing need repaired.
Removed all Instances of SQL Server except the default instance
Autmatic updates always happens with the update for Microsoft SQL Server 2008 Service Pack 3 (KB2546951)
Re-run of the automatic updates, it fails.
WindowsUpdate.log has the following entry.
2011-11-03 11:16:52:495 1132 fa0 report REPORT EVENT: {077FBD47-CBA0-4473-8DA7-F0573FC9FF84} 2011-11-03 11:16:46:905 - 0700 1 182 101 {F278F751-8670-477E-8DBB-F5C4DEAF5EA6} 100 80070643 AutomaticUpdates error content install Installation error: Windows failed to install the following update with error 0 x 80070643: Microsoft SQL Server 2008 Service Pack 3 (KB2546951).
ON the DEFAULT Instance SQL Server
SELECT @@VERSION
Microsoft SQL Server 2008 (SP3) - 10.0.5500.0 (Intel X 86) 22 Sep 2011 00:28:06 Copyright (c) 1988-2008 Microsoft Corporation Standard Edition on Windows NT 5.1(Build 2600: Service Pack 3) KB2546951 is an option, not the security update. Feel free to hide it.
Otherwise, try to post in this forum for assistance: http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads
-
After a disk crash and a new motherboard, how can I turn off to allow a reinstall
I have Photoshop Elements first migrated form a disc crushed second installation worked) and now from a PC AMD for a new motherboard and a new hard drive.
I have only a single computer case and only I use the PC.
When I try to charge my serial number Photoshop elements 14 inot he complains at the start it is already activated on the two PC.
I can't go back to either facilities previously enabled to log.
So, how rebook the two licenses that are glued on the former and today destroyed the material?
Contact Adobe technical support and ask them to reset your activations. She will probably wait until after the holiday weekend passes.
To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.Serial number and activation support (non - CC) chat
https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp -
VSS errors and backups in Server 2008 R2
I have a Windows 2008 R2 domain controller that has stopped backup. When I do a vssadmin writers list, I get several writers in a failed State:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) copyright 2001-2005 Microsoft Corp..Author name: 'Task Scheduler Writer'
The writer ID: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
Status: Stable [1]
Last error: no errorWriter name: 'recorder VSS metadata store.
The writer ID: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
Status: Stable [1]
Last error: no errorWriter name: 'Performance Counters writer. "
The writer ID: {0bada1de-01a9-4625-8278-69e735f39dd2}
Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
Status: Stable [1]
Last error: no errorAuthor name: 'FRS Writer'
The writer ID: {d76f5a28-3092-4589-ba48-2958fb88ce29}
Writer Instance Id: {9e2d3d77-08f6-4717-aee4-b05e16dd09f1}
State: [7] failed
Last error: Timed outAuthor name: 'ASR Writer.
The writer ID: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Instance Id: {117ef203-ea60-4d77-8fe9-efb73e2feb80}
Status: Stable [1]
Last error: no errorAuthor name: 'Dhcp Jet Writer'
The writer ID: {be9ac81e-3619-421f-920f-4c6fea9e93ad}
Writer Instance Id: {1ed50180-4e6f-4bfe-8550-0829d98bf8a7}
State: [7] failed
Last error: Timed outName of the author: "COM + REGDB Writer".
The writer ID: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {2cf99341-48e0-483f-adf3-49e1ae55e073}
State: [7] failed
Last error: Timed outAuthor name: 'Shadow Copy optimization Writer. "
The writer ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Writer Instance Id: {845d2eea-f6f3-44ba-990f-e5d8a3f051ce}
State: [7] failed
Last error: Timed outAuthor name: 'Registry Writer'
The writer ID: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {d70f5ba4-7efa-4115-9d37-eaa59fd0e84b}
State: [7] failed
Last error: Timed outI can stop the event COM system + and Volume yelli service that puts writers in a stable condition, but as soon as I have a performa backup our backup product (AppAssure) or the Windows backup (wbadmin start systemstatebackup) writers go in a failed State.
I get messages from event serveral including 8193: Volume Shadow Copy Service error: unexpected error calling routine IMultiInterfaceEventControl::GetSubscriptions. HR = 0 x 80010108, the object invoked has disconnected from its clients.
And
12291: volume Shadow Copy Service error: error on creating/using the interface editor of COM + writers: BackupShutdown [0 x 80042302, component VSS Service has encountered an unexpected error.
Check the log of events applications for more information.Support is located in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
my macbook pro is running slowly after update to El captain
Hello world
My macbook pro short slow after upgrading to El captain that can than I do to solve this problem?
Hello. Run the check being and post here results:
Maybe you are looking for
-
I tried to download the optimizer media Woodvine, which is required to view videos through hype, a library service, and first of all, I get a dialog box saying "Firefox prevented this site (tools.google.com) asking you to install the software on your
-
What should I do with the Vista(home edition) Dell preinstalled when I am told that I need
First of all, it is not Dell 7 and Windows Vista. I just want to know if there is an easy way. It seems that I should be able to shatter the version pre-installed Dell printer Vista Home Edition, Premium and it should be so easy, but I know or think
-
Third party software to be used as an endpoint
Hello all, can anyone recommend a software (a free software is recommended) it can be used to record with VCS and express VCS. I need this software for test purposes. I also prefer if I can use this software as a standalone endpoint (without registra
-
New Windows Mobile 8 will not recognize Ipod touch
I go to a PC from a Mac. My new laptop (bought Jan 11) runs under windows 8. The computer does not recognize my ipod touch (4th generation). When I plug it I get: "USB device not recognized. The last USB device that you connected to this computer h
-
What is the latest plugin for Photohop Lightroom for Windows?
What is the latest plugin for Photohop Lightroom for Windows?