Bad arguments error

Similar Questions

• Variable with a value. «PURGE error: bad Argument Type.»

  Hi, my 50G calculator accuses a value for the variable 'X' but I can't find it in any directory, and when I try to delete I get the message "' PURGE error: bad Argument Type." " I also have the theta variable with the same problem. How can I remove the value of these variables? TKS

  In addition to Make suggestions, two other possibilities come to mind: 'X' can be a directory object (which would cause the error to the wrong Type of Argument because non-empty directory objects cannot be purged by PURGE, but must be purged by PGDIR), or it could be a local variable (which can only be served by putting an end to the environment that created which is usually a program).  So if Make suggestions don't work, try foster 'X' PGDIR and if that does not work, try KILL (which ends all the current environments).

  If those WHO do not work, please do 'X' TYPE HOME and tell us what object type 'X'.

  DISCLAIMER: I do not work for HP; I'm a happy user of HP Calculator.

• Can't export an internal error has occurred: bad argument #1 to 'find' (string expected, got the draw)

  Cannot export

  An internal error has occurred: bad argument #1 to 'find' (string expected, got the draw)

  No one can tell you anything. Your track is not the least useful info like what is exported from which program on which system and so on.

  Mylenium

• At the start of Lightroom, I get this error message "bad argument to"loadstring"#1 (string expected, got Boolean). Someone knows how to fix this?

  When you try to access my library, I get an error message stating "bad argument #1 to 'loadstring' (string expected, got Boolean).

  I have already uninstalled and reinstalled Lightroom and it always appears.

  It may be a bad plugin. Try disabling all plugins, then by restarting LR.  To disable the plugins:

  1 file > plug-in Manager

  2. Select a plugin in the left column.

  3. in the right column, scroll down to the Status section.

  4. If necessary, expand the section status by clicking on the triangle to the left of the 'status '.

  5. click on disable.

• When I try to automate - fusion photo I get this error - which freezes my Mac and I have to force leave to use anything - 19 error: bad argument: invalid resource format. Error on line 0, the character offset 560, in ' {alignChildren: 'fill', text: ' $$$

  Error 19: Bad argument: invalid resource format. Error on line 0, the character offset 560, in ' {}

  alignChildren: 'fill', text: ' $$$ / AdobePlugin/Shared/Photomerge/process/Name = Photomerge', orientation: 'row', alignment: "fill."

  View1: Panel

  {

  "text: ' $$$ / AdobePlugin/Shared/Photomerge/Scr/layout = layout", direction: "column", alignment: ["fill", "fill"],

  View2: Group

  {

  orientation: "column", alignment: "fill."

  _LOauto: RadioButton {text: ' $$$ / AdobePlugin/shine/Photomerge/Scr/Auto = Auto ", alignment: 'left'"},

  view4: Image {image: "/Applications/Adobe%20Photoshop%20CS6/Presets/Scripts/Stack%20Scripts%20Only/P_AutoAlign _Automatic_87x38.png"}

  },

  view5: Group

  {

  orientation: "column", alignment: "fill."

  _LOperspective: RadioButton {text: ' $$$ / AdobePlugin/Shared/Photomerge/Scr/Perspective = Perspective', alignment: 'left'},

  Vision7: Image {image: "/Applications/Adobe%20Photoshop%20CS6/Presets/Scripts/Stack%20Scripts%20Only/P_AutoAlign _Perspective_87x38.png"}

  },

  view8: Group

  {

  orientation: "column", alignment: "fill."

  _LOcylindrical: RadioButton {text: ' $$$ / AdobePlugin/Shared/Photomerge/Scr/cylindrical cylindrical = ', alignment: 'left'},

  view10: Image {image: "/Applications/Adobe%20Photoshop%20CS6/Presets/Scripts/Stack%20Scripts%20Only/P_AutoAlign _Cylindrical_87x38.png"}

  },

  view11: Group

  {

  orientation: "column", alignment: "fill."

  _LOspherical: RadioButton {text: ' $$$ / AdobePlugin/Shared/Photomerge/Scr/spherical ball = ", alignment: 'left'"},

  view13: Image {image: ' /}

  Hi Donald,.

  Sorry for the inconvenience.

  This happens usually when the script does not have enough permissions to manage this.

  Please make sure that this folder applications, and two libraries have full read and write.

  Also if it happens again, please tell me if you use Bridge for example or directly with Photoshop.

  Thank you

  Jitendra

• ACS and "bad argument key.

  Today our ACS (ver 4.1 on windows 2003 server) suddenly stopped working. We use it to authenticate and authorize the main access to the switches via Ganymede. I see "bad argument key" errors in ACS, but the shared secret is the same on both sides (switch vs ACS), so it's not a problem.

  A "debug" on a switch Ganymede says:

  January 7, 21:32: Telnet2: 1 1 251 1

  January 7, 21:32: TCP2: Telnet sent WILL ECHO (1)

  January 7, 21:32: Telnet2: 2 2 251 3

  January 7, 21:32: TCP2: Telnet sent WILL SUPPRESS-GA (3)

  January 7, 21:32: Telnet2: 80000 80000 253 24

  January 7, 21:32: TCP2: Telnet sent TO TTY-TYPE (24)

  January 7, 21:32: Telnet2: 10000000 10000000 253 31

  January 7, 21:32: TCP2: Telnet sent MAKE the SIZE of the WINDOW (31)

  January 7, 21:32: TAC +: send worm package AUTHENTIC/START = 192 id = 3650164881

  January 7, 21:32: TAC +: using Ganymede server-group "Ganymede +" list by default.

  January 7, 21:32: TAC +: 10.1.2.2 (3650164881) AUTHENTIC/START/CONNECTION/ASCII queued

  January 7, 21:32:05: TAC +: 10.1.2.2 (3650164881) AUTHENTIC/START/CONNECTION/ASCII - TIMED OUT

  January 7, 21:32:05: TAC +: (3650164881) AUTHENTIC/START/CONNECTION/ASCII processed

  January 7, 21:32:05: TAC +: using Ganymede server-group "Ganymede +" list by default.

  January 7, 21:32:05: TAC +: 10.10.10.1 (3650164881) AUTHENTIC/START/CONNECTION/ASCII queued

  January 7, 21:32:10: TAC +: 10.10.10.1 (3650164881) AUTHENTIC/START/CONNECTION/ASCII - TIMED OUT

  January 7, 21:32:10: TAC +: (3650164881) AUTHENTIC/START/CONNECTION/ASCII processed

  January 7, 21:32:10: TAC +: using Ganymede server-group "Ganymede +" list by default.

  (etc.)

  There are two servers, ACS, they sync and they both have the same problem.

  Accessibility is not the problem.

  What should I check for?

  Erik

  Mohamed

  Since it is a new show you could get more and delivers better answers if you start a new thread rather than adding what may appear as most comments on a continuous.

  However, since you asked the question here, I have a comment and a suggestion. This production line:

  QA: TAC +: invalid package AUTHENTIC/START/CONNECTION/ASCII (control keys).

  suggests that something (probably the shared key for authentication of the device) is not properly synchronized between your device and the RADIUS server.

  My suggestion would be to search for in the report of attempts failed on the RADIUS server and see if you see the authentication attempt of this unit. If that is what the GANYMEDE server say about the cause of the failure?

  HTH

  Rick

• OpenProject bad argument when running SaveAsProjectTemplate.jsx

  Hello

  I created a template project, RoboHelp 8 and deployed the team for use in a future project.

  Six authors have been able to load the Project Explorer scripts, then you run the SaveAsProjectTemplate.jsx script to make a project template. An author has tried to execute this script and faced the error bad argument openProject once they have accepted the default location.

  The installation process is the same for all machines in seven, he activated/registered without a hitch and all available updates were performed on the seven machines (we all 8.0.2.208).

  Anyone know, please, why this error could be produced on a machine?

  Thank you very much

  Nigel

  Hi Nigel,

  I don't see your last post when I posted my previous answer. Using Windows 7 can indeed be a problem. I had a problem with writing the files when the user account control has been activated. This blocks the script write files to the locations protected like C:\Users and C:\Program Files. He did not produce any errors, files were simply not created or modified and the script trotted.

  You can turn off UAC for now and run the script again?

  Take a bow

  Willam

• UTL_MAIL, ORA-29261: bad argument

  Hi, I'm sort of a newbie PLSQL and this is my first post here. I saw that people asked this question before and I saw concerned responses. But here's the situation:

  BEGIN
          UTL_MAIL.SEND('[email protected]', 
              '[email protected]');
  END;

  This is the code that I'm running. But I get the error indicated in the title. Here is what I tried so far; I installed UTl_MAIL packets because they are not pre installed according to http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_mail.htm#i1001699, and then I set the parameter SMTP_OUT.

  show parameter smtp_out_server
  ---
  smtp_out_server                      string   10.200.123.135

  But I still get the error. I'm running on 10g release 2 XE on my local, and I am able to ping the e-mail server.
  
  Published by: user1156042 on July 14, 2010 01:37

  UTL_MAIL is an excellent example of how not to write a bunch of IMO... and is kind of disgusting to see this junk programming of Oracle.

  I think you simply run into a bug because you do not specify the optional material and/or message parameters. At the very least, include the subject.

  Here is an example (10.2 XE):

  SQL> exec utl_mail.send( sender => '', recipients => '', subject => 'Test', message => 'Test email' );
  
  PL/SQL procedure successfully completed.
  
  SQL> exec utl_mail.send( sender => '', recipients => '', subject => 'Test' );
  
  PL/SQL procedure successfully completed.
  
  SQL> exec utl_mail.send( sender => '', recipients => '' );
  BEGIN utl_mail.send( sender => '', recipients => '' ); END;
  
  *
  ERROR at line 1:
  ORA-29261: bad argument
  ORA-06512: at "SYS.UTL_ENCODE", line 190
  ORA-06512: at "SYS.UTL_ENCODE", line 315
  ORA-06512: at "SYS.UTL_MAIL", line 152
  ORA-06512: at "SYS.UTL_MAIL", line 455
  ORA-06512: at "SYS.UTL_MAIL", line 594
  ORA-06512: at line 1
  

  As you can see, do not specify the object (optional parameter) causes an error (trying to encode the header using the ENCODE_HEADER() function according to the UTL_MAIL package source).

• Satellite Pro 6100 often randomly turns off and bad RTC error

  Hi, I recently bought a sp6100 and it worked fine at first but now it goes out often random and comes with BAD RTC ERROR at startup. As a musician who uses the pc, it is very painful and I lost much of my work. Anyhelp would be great. Conrad

  HI Conrad,.

  Power loss random is usually a symptom of overheating and can usually be cured by cleaning all dust and lint that built into the CPU radiator. A vacuum cleaner is a useful ally in so doing. Just put the hose against the grids of aspiration air for a few seconds.

  The RTC error refers to the adjustment of the real time clock which is normally held by a small battery, usually mounted on the motherboard of your laptop. It is used to maintain the settings of the BIOS (including date/time) and is completely separate from your main laptop battery. Modification of the RTC (or CMOS) battery will involve some disassembly, so is best left to an authorized Service partner.

  Kind regards

• LabVIEW 2015 do not install it, autorun.exe "met a bad argument.

  Hello

  I recently got a new laptop and tried to install labVIEW on it. He started to install, but the system loses power in the middle and close. I deleted the National Instruments folder in Program Files (x 86) and retried, but when I run autorun.exe said he "met a bad argument" with a red 'X'. So I tried to launch setup.exe, and he starts, but bypasses LabVIEW and continues for the module in real time, where it says "LabVIEW 2015 must be installed before you install the real time module. Any help would be appreciated.

  Thank you

  
  

• NTFS bad block errors in Event Viewer

  I have a Dell 510 m with XP and a Toshiba HD. There are a few bad blocks that I see with the Diagnostic CD. They have not worsened in recent years. Recently, I saw a few 'Bad Block' errors in the event viewer. Diianostic CD shows me a bad block as before.

  My question is: when the Bad Block error, is to say that the ranking system, NTFS marked which also block bad, so he's not getting used again?  Otherwise, CHKDSK (the /R option?) will find the new bad block and mark it unusable?  If not, is there a way to do this?

  There is no option to replace the HD. I just need to keep this laptop going long enough to decide what to buy to replace.

  Thank you

  Peter

  Peter

  24 KB in bad sectors. = 6 clusters currently is not a serious problem. However, you must check regularly for some time to ensure that the number does not increase.

  Of course, any bad cluster can be bad news if it coincides with the location of a vital system file.

  You must also use chkdsk for repairs under this part of the report:
  Correcting errors in the Volume Bitmap.
  Windows found problems with the file system.
  Run CHKDSK with the /F (fix) option to correct these.

  Edit, Find with Volume Bitmap use search for more information:
  http://en.Wikipedia.org/wiki/Hierarchical_File_System

• Get 'bad image' errors at startup on XP

  You don't know if it's OK jst the chip but discovers this channel via Google after trying two registry fix downloads that were purchased.  Problem - suddenly 2 days ago I found that I couldn't get into XP without having to cancel about 15 messages in 'Bad Image'.  As noted that not a single program at fault, I would be grateful for any advice on how to fix the problem please.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/Windows-XP-bad-image-start-up-message/54e44de9-ea47-4489-AC15-243a66eedb2a

  Halima, thank you very much.  While waiting for a response, I noticed that I had a common feature of many messages 'bad image' to cancel on each startup was "Bearshare" in the description of the DLL, so I re-installed the program again and then typed "problems of Bearshare bad Image" in google, which led me to this site - http://www.geekstogo.com/forum/topic/294780-bad-image-errors/

  where I downloaded their "Revo Uninstaller" which allowed me to perform a deep unistall of Bearshare.  After reboot, I haven't lived any other message 'Bad Image'.  I hope that it will still be the case, but I'll keep your advice in case I need to try something else.  Thanks again.

  Geoff

• 'bad checksum' error when starting

  When I rebooted my computer, today, the ordinary boot process was interrupted by a black screen with an error message that says "bad checksum" and gave me the option to start anyway, or enter the configuration.  I chose to start instead of enter the configuration.

  After I submitted this question on the forum, I restarted my computer and got this error message (I typed exactly how it appeared on my screen)

  change of service configuration
  : Disk error
  Press F2 to continue, F1 to enter setup

  .. then I pressed F2 to continue and then the message 'boot sequence error' appeared for about 0.5 sec under the previous error message above, then my computer started as if nothing had happened

  I want to know what caused this 'bad checksum' error and the sequence/boot drive error and how to solve the problem (s)

  I have 32 bit Windows Vista Home Basic w / service pack 2

  Thank you

  ehill612,
  Thank you for visiting the Microsoft Answers community forum.

  Has anything changed summer on your system recently as new hardware or software installed any new updates?

  What kind of computer you have - laptop or desktop computer and what brand and model?
  This information will help us to help you solve this problem.

  Start by checking the file system corrupted system and check the hard disk for errors.

  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  You can help solve some computer problems and improve the performance of your computer by making sure that your hard disk has no errors.
   
  1. open the computer by clicking the Start button, click computer.
   
  2. right click on the hard drive you want to check, and then click Properties.
   
  3. click on the Tools tab and then, under check for errors, click check now.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
   
  4. click on start.
   
  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will need to reschedule the disk check for the next time you restart your computer.

  Send us information about your system and the results of these tests.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cloning hard drive with Clonezilla failed, gave a bad sector error message and now the original hard drive will not boot

  Original title: startup problem

  I tried cloning from my hard drive with Clonezilla, and he gave me a bad sector error.  I have since run the hard drive test in bios and it passed.  Anyway, clone has failed, and now the original hard drive will not boot.  My dvd player won't turn when I try to load the Vista repair CD (Vista Home Premium 32 bit).  Clonezilla removes the start settings for the original disc?  And if so, how can I restore it?  The computer starts just a black screen with a cursor at the top left.  When I install the hard drive in a box and connect it to another computer, it shows the partitions and files all seem to be there.

  Hi DougEisenmann,

  Clonezilla is not supported by Microsoft.

  If you are unable to boot from the Vista repair disk then you will need to go into the system BIOS and make sure that it is configured to boot from the DVD drive.

  Check out the link:

  Windows to boot from a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/Start-Windows-from-a-CD-or-DVD

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  See also the thread which has some troubleshooting steps for this same issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/Windows-Vista-crashedstartup-repair-wont-launch/49315171-1601-49DD-84fe-50bebd9ddbae

  The above link contains third party links provided by other users.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer

• Bad image error

  I am constantly bad image errors as soon as I turn on my computer until I turn it off. It displays in the form: Windows\system32\AVGRSSTX. DLL. I don't know how to stop or fix this problem.

  It is a problem with AVG http://forums.avg.com/ww-en/avg-free-forum?sec=thread&act=show&id=119251&type=0

  My recommendation is that you uninstall AVG using the appropriatehttp://www.avg.com/gb-en/download-tools removal tool

  You can then reinstall AVG or other program antivirus.