Bad Behavior Bin in 2015

Similar Questions

• Bad behavior of cancellation with the additional block end no OnNewStep

  Hello

  I'm working on StepTypes requiring a block structure, as loops in TestStand (using TestStand 2012). I use OnNewStep lower level to insert the end block no during the boot block is instantiated.

  I do not manage to get a good behavior of cancellation with it as follows:

  • If I do not use SequenceFile.IncChangeCount in OnNewStep stage, when I select Cancel in the sequence editor, the only stage of boot block is removed, the end block remains. My understanding is the expected behavior: motor TestStand don't know that the no end block has been added, she has no reason to remove it.
    However, I prefer to remove both start and end block as follows, as do with While TestStand, DoWhil or for loops.
  
  
  • If I do a SequenceFile.IncChangeCount in the OnNewStep stage, when I select Cancel in the sequence editor, I get the following error, and nothing is deleted or cancelled the sequence:

    

  I guess TestStand increments the ChangeCount when I insert a step, and OnNewStep also increment the ChangeCount, while the operation should be considered as a single action.

  I found in the documentation of the UndoStackclass with the method AggregateTopUndoItems method, I suppose, may be the solution. But UndoStack seems to be available only from ApplicationMgr and SequenceFileViewMgr (which are not accessible from the context of the sequence).

  Any idea to get similar behavior at the correct stage of control of native stream, with cancellations?

  Best regards

  Well, I found a solution by looking at what is happening in CommonFlow.cpp (\National Instruments\TestStand 2012\Components\StepTypes\FlowControl).

  For your information, here is the code:

  Insert a corresponding END step after step again
  
  ' public static void OnNewStepWithEndStepFunction (SequenceContextPtr & sequenceContext)
  
  {
  
  	If (! sequenceContext-> sequence-> HasMismatchedBlocks)
  
  		return;
  
  PropertyObjectFilePtr	file = sequenceContext-> SequenceFile-> AsPropertyObjectFile();
  
  	StepPtr endStep sequenceContext-> engine =-> NewStep ("", gEndStepTypeName);
  
  	UndoItemCreatorPtr undoItemCreator sequenceContext-> engine =-> NewUndoItemCreator (EditKind_InsertStep, file, L"" ");
  undoItemCreator-> BeginEdit (endStep-> AsPropertyObject());
  
  	sequenceContext-> sequence-> InsertStep (endStep, sequenceContext-> StepIndex + 1, sequenceContext-> StepGroup);
  
  	undoItemCreator-> EndEdit();
  _variant_t	;
  
  	endStep-> name = (char *) sequenceContext-> engine-> GetResourceString ("FLOW_CONTROL_STEPS", "END_DEF_STEP_NAME", "", &found);)
  file-> IncChangeCount();
  to do this, or the step type will not be displayed immediately as being used by the file
  
  	file-> TypeUsageList-> AddUsedTypes (endStep-> AsPropertyObject());
  undoItemCreator-> CreateAndPostUndoItem (CreateUndoItemOption_NoOptions, TS::ApplicationSite_DefaultSite);
  
  }

  So the trick is to instantiate a UndoItemCreator that points to the current SequenceFIle, to call BeginEdit with, as an argument, the step to insert as PropertyObjetct, before calling the InsertStep method, then call the EndEdit method. Increment the file change, add the step as PropertyObject in the TypeUsedList file and finally call CreateAndPostUndoItem method.

  ... Happy!

• Resolution menu interface bad start PS CC 2015!

  Please help me! I have installed PS CC 2015 (trial version) in the interface of setting my menu interface is set on 'automatic', but when the PS started the interface is in low resolution. My office is located at 1920 x 1080 and all the early product Adobe in good resolution.

  Go in Edition > Preferences > user interface scaling, set it to 100%.

• Trackpad X201T questions - randomly try to scroll, other bad behavior

  Hi guys.

  Sometimes, my trackpad will flip out.  If I'm scrolling with my fingers, it will stop moving and decide that I said to start the scrolling, or whether I want to zoom text or he stops in his tracks and put the cursor in the window cursor move.  Sometimes it will stop and then start moving in a semicircle, and so it seems to be really sensitive.

  I run Windows 7 x 64.

  I installed the operating system from scratch, and I took care to follow the instructions in "installing OS from scratch" Lenovo on their Web site.  Entirely, I realize that the order of the driver and the software install issues with Thinkvantage stuff.

  I do IT doesn't work and I have deployed a lot of laptops Lenovo to employees over the years.  I don't think it's something I am doing wrong, but you never know!

  Just to see if it was a problem with my windows install, I reinstalled Windows yesterday, and I get the same behavior.

  I also tried to install the Synaptics drivers and I see the same behavior.  I have a docking ban, and it's not only that after docking.  I can reset the machine after it is on the dock and it will still do this after awhile.

  I noticed that, after that, he, the parameters of the application (inside Ultranav, Mouse Control Panel Applet tab) do not seem what I put them.  He did exactly the same thing for the Synaptics software.  For example, I had activated 3 finger gesture support, and then after that he freaked out, who has been disabled in the control panel.

  Sometimes it will work for awhile perfectly.  During this time, I don't want to throw the computer more.

  Anyone else having a problem like this?

  Yes, I did.  I have a new piece of wristrest with the new trackpad from Lenovo.  It tooks weeks to arrive.  Corrects the problem absolutely.

• Bad behavior in Mozilla Firefox

  Hello
  I have a table and a column I wrote (use a commandLink):
  

                          <af:column sortProperty="Transaction"
                                     filterable="true" sortable="true"
                                     headerText="TRANSACTION NUMBER"
                                     id="resId1c4" width="75">
                            <af:commandLink id="outputText4"
                                            text="#{row.Transaction}"
                                            action="receipt"
                                            windowHeight="700" windowWidth="780"
                                            partialSubmit="true"
                                            windowEmbedStyle="window"
                                            launchListener="#{openDialog.handleDialogLaunch}"
                                            useWindow="true"
                                            actionListener="#{bindings.setVarScope.execute}"/>
                          </af:column>

  in explore browsers and Chrome when I click in the field on a line, it works well (with a single click is to choose the line and open a new window with the straight line. Transaction).
  When I run in Firefox and click on the link field, the line is not chosen. So, if I want to run well, first I have to choose the line and then I click on the link.
  Why, is there a different between explore behavior and firefox? (I tried with 2 different version of firefox).
  Thank you

  Are you running on jdev 11.1.2?
  In this case you hit a bug...
  And here is the solution http://blogs.oracle.com/jdevotnharvest/entry/jdeveloper_11_1_2_command

  Timo

• Text box text includes bad behavior with commas

  Hi all
  
  Right now I use APEX 3.1.2.
  I experienced some problems with the elements of text box when I insert commas (,) in the text.
  For example,.
  I have a form with element 3 [bis (text area), B (text), C (text)]
  If I try inserting "abc, bcd, cde" has
  I get A = 'abc', B = "bcd" and C = "cde".
  
  I think APEX recognizes comma (,) as a separator in the value in the query to insert the form-related. I try with a calculation calculation calculation Post or after the presents (for example "|: A |) ") to enforce the APEX to recognize all of the text, but it does not work."
  
  Thank you
  Nino

  Nino,

  The behavior you describe is certainly not the default behavior of the ApEx. Could you post an example of apex.oracle.com?

  Kind regards
  Dan

  http://danielmcghan.us
  http://sourceforge.NET/projects/tapigen

• Bad behavior when closing FF 9.0.1 with several tabs open

  Despite by checking the checkbox in the tabs for FF 9.0.1 preferences for "Warn me when closing multiple tabs", the browser does not behave as it did before the upgrade to FF 3.6. Looking at the following Help article:

  https://support.Mozilla.org/en-us/KB/Firefox%20does%20not%20ask%20To%20save%20tabs%20and%20Windows%20on%20exit

  showed me the appropriate topic locations: config to change the settings I think must have been properly updated in Firefox by selections of preferences automatically. Am I missing something here? Why would it be something a preference that can be selectable, but ignored in practice?

  Mac OS X 10.6.8

  What wrong when you close a window with multiple tabs?

  Make sure you close Firefox ask via Firefox-> Firefox Quit to close all open windows and leave Firefox.
  
  Otherwise you just close the current Firefox window and this window might not get restored (check the history > recently closed Windows)

• BlackBerry Smartphones BBM on curve 9320 - bad behavior

  Son of 9320, on a Virgin Mobile (Canada) plan will not let him use BBM on wifi. The app insists on finding a "data connection". We do not have a data plan. I use BBM on my Android phone using wifi. I find it strange that a native app on Blackberry does not work correctly.

  Can someone enlighten me please. There must be a solution.

  Thanks - sent from my orphans but still cool PlayBook

  Hello

  In fact, what you describe is WAD - working as designed. Only via the newer devices (BB10, no BB Android and iOS) BBM and other exclusive services BB can be used without a proper data of the mobile operator plan. BBs inherited, such as your son, need a plan of data by the carrier, even if the use is strictly via WiFi. It's just the way things are legacy devices (the full explanation is much longer... If you want, just ask).

  I hope that your operator has a plan very inexpensive which will just BBM and perhaps other social networking services... but only they can answer as to what services they offer through their data of different plans.

  Good luck!

• SetProperty_Float (kXMP_NS_EXIF, "*", *, 0) bad behavior

  I tested samples original XMP and had a few problem

  • Here I come to read the data, modify and then read it

  Double xxx;
  meta. GetProperty_Float (kXMP_NS_EXIF, "BrightnessValue" and xxx, 0);
  cost < < xxx < < endl;
  meta. SetProperty_Float (kXMP_NS_EXIF, "BrightnessValue", 1, 0);
  meta. GetProperty_Float (kXMP_NS_EXIF, "BrightnessValue" and xxx, 0);
  cost < < xxx < < endl;

  First time it works fine, but how long second failure on the first get function with the following error: ERROR: invalid float string

  • Setting the property actually twice before getting it, solves the problem

  Double xxx;

  meta. SetProperty_Float (kXMP_NS_EXIF, "BrightnessValue", 0.8, 0);
  meta. GetProperty_Float (kXMP_NS_EXIF, "BrightnessValue" and xxx, 0);
  cost < < xxx < < endl;
  meta. SetProperty_Float (kXMP_NS_EXIF, "BrightnessValue", 1, 0);
  meta. GetProperty_Float (kXMP_NS_EXIF, "BrightnessValue" and xxx, 0);
  cost < < xxx < < endl;

  Thought it works, it has no value because there is no need to define a values and then get the value you just set.

  Any thoughts?

  Thank you

  Mikayel

  Hi megibyan,

  The BrightnessValue which you are trying to get is channel (numerator/denominator). If the appeal on GetProperty_float() awaiting the value should have (.) but in this case there ("/") not ("". "") you get an exception/crash. Thus, instead of call meta. GetProperty_Float (kXMP_NS_EXIF, "BrightnessValue", & xxx, 0) call meta. GetProperty (kXMP_NS_EXIF, "BrightnessValue", & yyy, 0); where yyy is type std::string.

  In the second case, when you set a value of float with (.), you get no accident.

  -Sunil

• Black bad behavior Arror (selection tool)

  How is it that when I click and drag a box with an image using the black (selection) arrow tool, rather than moving the entire area, it moves all the content of the box?   It's the white direct selection arrow that governs the movement of the contents of a box.

  arrow black must move the object of ANY... what gives here?

  is it possible to have the black arrow tool don't move objects integers, content and everything?

  Thank you!

  w

  When you drag the pointer of your mouse over a box - a circular object that looks like a ring of development through the lens of the camera is displayed (it is in fact intended to be a quick way to check the size of an image/object) -If you click the box when this circular object shows you choose 'content'-simply select the box by its edge , or make sure the round thing is not visible and you'll be fine

• Business Catalyst customer service bad behavior...

  I have a problem and start the conversation with 3.40 BC customer service:

  Rajan Kumar Sharma BC support Good

  Rajan Kumar Sharma Hi Sami Muhonen. 03:40 Sami Muhonen Hello!

  03:42 I launched a site www.vaiskishow.fi (vaiskishow.businesscatalyst.com). Problem is that when I try to paste this address on facebook wall or is the answer: cannot display this Web Site no Start Page has been configured. To configure a default start page, set one of your Web Pages to the Start Page. Please contact your administrator for more information.

  03:43 start page in said configuration "Homepage" and it's the only choise's only becose page.

  03:48 Hello!

  Rajan Kumar Sharma Let me check.

  Sami Muhonen I have another page launched as well "www.ukc.fi" who have no set start page and it still works very well with facebook so I think it's a question about your server software.

  How long it takes to check?

  More than 20 minutes without response?

  You have given our service customer as being faulty.

  .. .and now time 4.19 and still no response is no longer. Thank you very much!!!

  It's probably just hides FB now I erased using the FB debugger. Learn more about this tool here - http://schipul.com/help-files/clearing-facebook-cache-link/.

  

  Thank you

  Vinayak

• bad behavior files in the folder root.

  Hi people,
  
  I am using CS3 with success for several months after 5 years on v.4. A new problem comes up, and it makes my life very difficult.
  
  Html files in my folder - more disturbing, the whole site index - stopped aperture, control input/output, uploading... everything that I'm trying to do, Dreamweaver stands out. All files inside another folder on the site are very good. (I have rebuilt the site cache and I did a cleaning to the computer in general without effect).
  
  Web files are hosted on a local network and accessed by a total of 5 people, 2 of us every day. The other daily user has the same problem with these a few html files. Others do need these files in the root folder.
  
  I CAN'T seem to open the html files using the command 'open' and can change/Save as usual. But if I double click on the file in Dreamweaver or try to use the Put command... * ACCIDENT *.
  
  Thoughts?
  Thank you!
  Liza

  OK, tried many things, finally, here's what has worked in the most simple terms! :

  -In DW Manage Sites, exported and then deleted the site for the "broken" site definitions (do not end up using definitions of ancient sites, but wanted a backup of just-in-case). DW closed
  -DW NO:
  * created an empty folder, without a title on my local server with a doc test.html empty inside
  * Open the record of the old site and the new site without name folder
  * copied and pasted root-level HTML files from the old folder to the new
  * moved all other root-level files and all files from the old site folder again
  * delete the old site folder
  * re-named file with a new site name Untitled - don't use same name as the old folder root
  -In DW, has created a new site. In Manage Sites, typed in all circles of old site and new game root
  -DW helped create the new cache
  -DW closed

  Things are working properly this morning. I just need to go back 2 other machines to the new root. This relatively easy solution took a week to figure out, so let's hope it's permanent!

  Good day all.

• "wrong BDPHash.bin version" error when you try to install AnyDVD.

  I have what ANYDVD software downloaded on my computer, I received the error "bad BDPHash.bin version of the message.  Help...

  Do you Google? -Online http://forum.slysoft.com/showthread.php?t=34383&highlight=ERROR%3A+BDPHash.bin+missing

• Bad display on MX700 with 3 endpoints connected

  Bad display on MX700 with 3 endpoints connected | Telepresence | Cisco support community

  Hello

  We have 3 MX700 (two screens) with multisite license and tried a conference between the 3 sites, but we had a bad behavior on the third connected site...

  Assume the following:

  -Call of Site1 site2: site1 and site2 see on screens separated as planned

  -Site1 calls training3 to join them at the Conference and then here is the result:

  * site1 sees site2 and training3 on screens separated as planned

  * site2 sees site1 and training3 on screens separated as planned

  * training3 sees site1 and site2 on the same screen and the other screen is only usable for a common presentation or to see the local picture

  It was impossible for training3 to change the layout of the screen. The only thing was to move the image of the local camera on different screens, but it was impossible to see site1 and site2 on different screens. It's really annoying because it displays site1 and site2 small on the same screen.

  For more information on the 10 touch, the screen showing site1 and site2 was named by 'site1' name. As if the video stream only site1 calling, there is no mention of site2 anywhere.

  Can someone help us with that?

  Thank you in advance for your help and best regards.

  DCCP

  // // //

  If I understand correctly - the call scenarios your assumptions are incorrect. Only the MX hosting the call will be other ends remote on separate screens. The standard features of SIP/H.323 allowing for a live video stream, a second for the content. Cisco Telepresence Server is a feature called "multistream" which allows you to send more than a live stream, but not the multi-site integrated in the codec. The call - in your example one - site hosting site they can see sites 2 and 3 on separate screens because they are in calls with each of them.

  In your balls - if site called 1 2 and 3, only 1 site would see the two separately. Suggest site two, but it would be no less than two called 1 and 3 of the site.

  If the site called 1 2 and 3, site 1 would show 2 and 3 on both screens if there is no content, and they combine on 1 screen if it has content. Sites 2 and 3 would show only the handset (usually continuous presence) image on the primary and the second would remain turned off unless it had contained.

• How to do vertical behaviors repeat region Server?

  I've done many "server behavior, repeat region" vertical list without any installation view, now, I'm a new, horizontal shows that makes no sense. Anyone know why and how to solve this 'bad behavior '?

  You have all the linesin the code of the table - this is why everything is horizontal: