Bad connection variable
Hi friendI don't want to use a trigger to update a value of varchar2:
create or replace trigger WORK_STITCH_NAME_TRIG
after insert or update on ASS_WORK_STITCH
for each line
declare
NAME VARCHAR2 (100);
Start
If the insertion
Select ENAME in the NAME of UAMRIS. WORDER where OID =: new. OID;
Update UAMRIS. WORDER
Set ENAME =(:new.NAME)
where OID =: new. OID;
end if;
end;
/
but it gives me error like ': New.Name' variable of bad connection.
Can someone help me with this please!
Thank you
Zitouni
: OLD /: NEW applies only to the trigger of the columns of the table. Your relaxation is on table WORK_STITCH and the NAME is variable PL/SQL. Simply remove: NEW:
create or replace trigger WORK_STITCH_NAME_TRIG
after insert or update on ***_WORK_STITCH
for each row
declare
NAME VARCHAR2(100);
begin
if inserting then
select ENAME into NAME from UAMRIS.WORDER where OID=:new.OID;
update UAMRIS.WORDER
set ENAME=NAME
where OID=:new.OID;
end if;
end ;
/
SY.
Tags: Database
Similar Questions
-
INSTEAD, error PLS-00049: bad connection variable
I try to use a PLACE for me to enter data in a table of bridge. Thanks in advance
I get the following error:
Error on line 4: PLS 00049: bad connection variable ' NEW. MEMBER_ID'
2 INSTEAD OF THE INSERT OR UPDATE OR DELETE
3 ON VI_Member_Talent_VW making REFERENCE AGAIN AS NINE OLD and OLD
4. FOR EACH LINE
5. START TO
6. IF THE INSERTION
Here is the code:
CREATE OR REPLACE TRIGGER VI_INSERT_UPDATE_MT
INSTEAD OF INSERT OR UPDATE OR DELETE
ON VI_Member_Talent_VW REFERENCING NEW AS NEW as OLD OLD
FOR EACH LINE
BEGIN
IF THE INSERTION
THEN
INSERT INTO VI_Member_Talent (Member_ID, Talent_ID) VALUES (: NEW.) Member_ID,: NEW. Talent_ID);
END IF;
IF THE UPDATE
THEN
UPDATE VI_Member_Talent SET Member_ID =: NEW. Member_ID, Talent_ID =: NEW. Talent_ID
WHERE ROWID =: OLD.ID;
END IF;
IF THE REMOVAL
THEN
DELETE FROM VI_Member_Talent WHERE ROWID =: OLD.ID;
END IF;
END;
Edited by: user13003575 may 2, 2010 08:53user13003575 wrote:
It's the viewCREATE OR REPLACE FORCE VIEW "VI_MEMBER_TALENT_VW" ("ID", "Member_ID", "Talent_ID") AS SELECT rowid id, Member_ID, Talent_ID FROM VI_Member_Talent /
and there is the problem.
The view was created with quotes around column names, so that they are case-sensitive. You need to either modify your trigger double quote column names, or rebuild the view without the quotes. Personally, I'd go with changing the display.
John
-
Bad connection variable? I'm doing a host variable.
Okay, so I said a global variable:
VARIABLE g_total NUMBER
and I want to use this variable to store the results of a stored procedure (I reduced my code to focus on the problem area):
CREATE OR REPLACE PROCEDURE my_procedure
(p_price IN m_movies.price%TYPE
p_quantity IN m_cart.quantity%TYPE)
IS
BEGIN
: g_total: = p_price * p_quantity;
DBMS_OUTPUT. Put_line ("the order total is: ' |: g_total");
END;
/
After all this, I get an error "bad bind variable g_total ' for the two lines I use it inside the procedure. What the heck is a variable binding? I use a host variable. (I think). If this has nothing to do with the fact that I can only give a very generic NUMBER data type to the host variable? Help, please!It's not the way it will work. You cannot create choice with lie (as you saw).
You had rather code like this:SQL> VARIABLE g_total NUMBER SQL> create or replace procedure my_procedure (p_price in number, p_quantity in integer, g_total out number) is begin g_total := p_price * p_quantity; end my_procedure; / Procedure created. SQL> exec my_procedure(50,3, :g_total) PL/SQL procedure successfully completed. SQL> print g_total g_total ---------- 150
-
PLS-00049: bad bind variable in the database trigger
Hi all
If the POSTAL code table has no matching records, the trigger must create a new record for the given value of the zipper before you add a new record to the STUDENT table
SQL > CREATE TABLE student
(
zip VARCHAR2 (5).
student_id NUMBER,
created_by VARCHAR2 (10),
CREATED_DATE DATE,
Modified_By VARCHAR2 (10),
MODIFIED_DATE DATE
);
SQL > CREATE TABLE zip code
(
zip VARCHAR2 (5).
zip_ID NUMBER,
created_by VARCHAR2 (10),
CREATED_DATE DATE,
Modified_By VARCHAR2 (10),
MODIFIED_DATE DATE
);
SQL > CREATE VIEW student_v
AS
SELECT *.
OF the student;
Created view.
SQL > CREATE OR replace TRIGGER student_ins
instead of INSERT ON student_v
FOR EACH LINE
DECLARE
v_zip VARCHAR2 (5);
BEGIN
BEGIN
SELECT zip
IN v_zip
ZIP CODE
WHERE zip =: NEW.zip;
EXCEPTION
WHEN no_data_found THEN
INSERT INTO postal code
(zip,
zip_ID,
created_by,
CREATED_DATE,
Modified_By,
MODIFIED_DATE)
VALUES (: NEW.zip,)
: NEW.zip_id-> not commented
USER,
SYSDATE,
USER,
SYSDATE);
END;
INSERT INTO student
(zip,
student_id,
created_by,
CREATED_DATE,
Modified_By,
MODIFIED_DATE)
VALUES (: NEW.zip,)
: NEW.student_id,.
USER,
SYSDATE,
USER,
SYSDATE);
end;
Decline: Trigger created with compilation errors.
SQL > show error
Errors for STUDENT_INS TRIGGER:
LINE/COL ERROR
-------- -------------------------------------------
19/21 PLS-00049: bad connection variable ' NEW. ZIP_ID'
SQL > ed
CREATE or replace TRIGGER student_ins
instead of INSERT ON student_v
FOR EACH LINE
DECLARE
v_zip VARCHAR2 (5);
BEGIN
BEGIN
SELECT zip
IN v_zip
ZIP CODE
WHERE zip =: NEW.zip;
EXCEPTION
WHEN no_data_found THEN
INSERT INTO postal code
(zip,
zip_ID,
created_by,
CREATED_DATE,
Modified_By,
MODIFIED_DATE)
VALUES (: NEW.zip,)
-: NEW.zip_id, -> replace commented with NULL
NULL,
USER,
SYSDATE,
USER,
SYSDATE);
END;
INSERT INTO student
(zip,
student_id,
created_by,
CREATED_DATE,
Modified_By,
MODIFIED_DATE)
VALUES (: NEW.zip,)
: NEW.student_id,.
USER,
SYSDATE,
USER,
SYSDATE);
end;
SQL > /.
SQL > insert into student_v (zip) values('111');
1 line of creation.
SQL > select * from student_v
2.
ZIP STUDENT_ID CREATED_BY CREATED_D MODIFIED_B MODIFIED_
----- ---------- ---------- --------- ---------- ---------
111 APPS APPS APRIL 3, 14 3 APRIL 14
SQL > select * from student
2.
ZIP STUDENT_ID CREATED_BY CREATED_D MODIFIED_B MODIFIED_
----- ---------- ---------- --------- ---------- ---------
111 APPS APPS APRIL 3, 14 3 APRIL 14
SQL > select * from zip code
2.
ZIP ZIP_ID CREATED_D MODIFIED_B MODIFIED_ CREATED_BY
----- ---------- ---------- --------- ---------- ---------
111 APPS APPS APRIL 3, 14 3 APRIL 14
You wrote trigger on the table of the student. So in the trigger, only the columns of this table must be offered for example: NEW.zip.
Since zip_id is not part of this table, the: NEW.zip_id must always generate the error.
insert into student_v (zip) values('111');
In the above statement, you can only provide the value for the column zip but not zip_id. Therefore, the: NEW.zip_id is not available in the trigger. Must extract this value in the sequence after it is created.
for example
create the test of the order;
INSERT INTO postal code
(zip,
zip_ID,
created_by,
CREATED_DATE,
Modified_By,
MODIFIED_DATE)
VALUES (: NEW.zip,)
test.nextval,
NULL,
USER,
SYSDATE,
USER,
SYSDATE);
-
View object: how to get the value of a 'connection variable' by using expression groovy?
Hi all
I have a view object, and I set a variable binding for the VO. Then, I want to set the default value of an attribute of the VO to the variable binding.
I try to set the Type of object to the Expression attribute value and the value in the name of the connection variable. But it does not work.
My question is how to use a bind variable in groovy script?
Thanks in advance and sorry for my bad English.
Samson FuHi Samson,.
Try this:
viewObject.getNamedWhereClauseParam ("Your_Bind_Variable_Name")Note: Keep the viewObject is, don't replace with your name viewobject
Jean Lou
-
Tecra Z50-A-14 t - bad connection WiFi signal
In short.
Absolutely the same problem with my new Tecra.
Stable connection by cable.Bad connection same 3 5 meters from the router. If the distance is longer, or I use the laptop in another room sometimes it s no link at all.
The card is Intel (R) Dual Band Wireless AC-3160 and that article how I found the link above.All electronic in the work of the House with no problem, but this piece of garbage to Wi - Fi only the same has even after 3 visits in the repair shop. And that s for new out of the box laptop.
I really disappointed me.
+ The message was edited: link has been removed - forum rules +.
Hmm. have you noticed the same problem of weak signal using the laptop to the power of the battery as well as connected to the adapter?
My signal low similar knowledge questions may seem due BOF WiFi enabled power saving settings. This setting can be found in the current power plant? Advanced settings
On the other hand, it might be possible that there is something wrong with the WiFi antenna cable. Maybe it is not properly connected to the mini PCI module
In the case of changing the settings would not help you and if your already updated the Wlan to the latest version available, I think that the Toshiba certified maintainer should check the antenna.
-
I installed Oracle Developer with success, but having bad connect to Sql more than command line, also unable to connect via the developer tools, I get a TNS: Connect timeout occurred. This happens also for the "Plus" Sql for Windows.
However, I can connect via the Sql Plus command window when it is executed from "Start-> all programs", but not when I first run the command window:
I have a good Oracle 11 g install on Windows 7 and a good developer Sql install so I can connect to databases, but something does not work when you try to connect through these tools. Although Sql Plus works when called from 'Start-> all programs'
sqlplus scott/tiger - don't use SQL * Net, you can connect like this even with the listener is stopped.
Developer SQL can ONLY connect using SQL * Net & can be blocked by the firewall
to connect using sqlplus & SQL * Net, you need to invoke it as below
sqlplus scott/tiger@orcl
-
PLS-00049: bad bind variable 'NEW.col1' (col1 exists in the table)
I use Oracle 12 c. And a bad bind variable error in this statement.
create or replace
check_tax_number relaxation
INSERT BEFORE THE "C ##MYUSER". "customer" FOR EACH ROW
BEGIN
'0' IF new.taxpayer <>THEN
: new.taxnumber: = "123456789"; -error here...
END IF;
END;
I don't know which exists taxnumber customer in the table column.
Here's desc 'C ##MYUSER '. "" customer ".
Name of Type Null
--------------------------- -------- -------------
taxpayer NOT NULL NUMBER (1)
taxnumber NOT NULL NVARCHAR2 (10)
Other passes...
Thanks for help.
Based on the declaration of the customer table you posted columns are created in lowercase. Therefore, you must use the names of column between quotation marks:
create or replace
check_tax_number relaxation
INSERT BEFORE THE "C ##MYUSER". "customer" FOR EACH ROW
BEGIN
IF : new. " taxpayer""" <> '0' THEN
: new. " " "taxnumber""": = "123456789"; -error here...
END IF;
END;
SY.
-
TRIGGER ERROR: bad bind variable
Hello
I just start with oracle and I try to do the same thing as auto_increment in mysql by creating this sequence and the trigger but the trigger, I get the following error:
error:
-----
This is the code for the relaxation, table and sequence:PLS-00049: bad bind variable 'TAKEOVER_USERS.TAKEOVER_UID'
triggering factor:
---------
Table:CREATE OR REPLACE TRIGGER "TAKEOVER_USERS_T1" BEFORE insert on "TAKEOVER_USERS" for each row begin select TAKEOVER_UID.nextval into :takeover_users.TAKEOVER_UID from dual; end;
------
sequence:CREATE TABLE "TAKEOVER_USERS" ( "TAKEOVER_UID" NUMBER NOT NULL ENABLE, "TAKEOVER_FBID" VARCHAR2(20) NOT NULL ENABLE, "takeover_accepted_terms" NUMBER(1,1) NOT NULL ENABLE, "takeover_lastName" VARCHAR2(30), "takeover_firstName" VARCHAR2(30), "takeover_country" VARCHAR2(40), "takeover_session" VARCHAR2(50) NOT NULL ENABLE, "takeover_created" TIMESTAMP (6) NOT NULL ENABLE, CONSTRAINT "takeover_users_PK" PRIMARY KEY ("TAKEOVER_UID") ENABLE )
-----------
Any idea what I need to change to make it work?CREATE SEQUENCE "TAKEOVER_UID" MINVALUE 1 MAXVALUE 99999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE
Thank you!
ChristineIf your DB is 11g, you can try this
CREATE OR REPLACE TRIGGER "TAKEOVER_USERS_T1" BEFORE insert on "TAKEOVER_USERS" for each row begin :NEW.TAKEOVER_UID:=TAKEOVER_UID.nextval; end;
If 10g or more...
CREATE OR REPLACE TRIGGER "TAKEOVER_USERS_T1" BEFORE insert on "TAKEOVER_USERS" for each ROW BEGIN SELECT TAKEOVER_UID.NEXTVAL INTO :NEW.TAKEOVER_UID FROM dual; end;
Kind regards
Prazy -
get the connection variable in jython
Hi experts,
How to get the connection variable in the procedure using jython, or to assign the connection of the source variable in variable jython
as in java bean shell, I used to use these
Chantal Connection = snpRef.getJDBCConnection ("SRC");
the procedure, I would like to create is source: oracle, target: jython.
Thanks in advanceHello
I believe in jython would make it almost similar
for example
Chantal = snpRef.getJDBCConnection ("SRC")
or
Chantal = odiRef.getJDBCConnection ("SRC")
See you soon
John
http://John-Goodwin.blogspot.com/ -
Bad connection with List_Item?'
Hi all
I use Oracle 10 g and I write this code in a Menu:Customer_Id NUMBER(10) := :LIST_ITEM_CUSTOMERS;
LIST_ITEM_CUSTOMERS corresponding to NUMBER data Type
So, I got this error:Bad bind variable 'LIST_ITEM_CUSTOMERS'?
Thanks in advance :)You can't get directly the content of an element of forms when you are outside (menu or pll). Use the built-in Name_in() function:
var := Name_in('LIST_ITEM_CUSTOMERS');
François
-
Hi all
I have a problem and will apprecaite all the help I can get. I think I will find an answer here.
I have a small network, Linksys WRT350N (wireless router) attached to a modem and then connected to a desktop computer and with 3 wireless laptops connected to the router. All 3 are really great to work and access the internet very well.
Currently, I have the need to expand the network to 3 floors, so I bought 3 Points of access wireless of Linksys (WAP4400N).
I ran 3 cables CAT5e cable from the router and which ends individually all 3 floors, the top floor is less than the router 40meters. With the cables that came in their boxes, I connected the APs to the router and I have correctly set up the 3 Access Points with them attached to the router, all 3 works perfectly (I can access wireless internet via 3-point). However when I take the points of access to the upper floors and connect cables cat5e APs no longer work but connect after some time with the message "limited connectivity".
Why can I connect when the APs are connected to the ground floor via a short cable that came in the box and not when it is connected to put cables from the ground floor to the upper floors but rather make the "LIMITED SERVICE" message and cannot connect to the internet.
Also if I connect the cat5e cables directly to a laptop computer on all the floors, I can connect to the internet (the work of cables fine when connected directly to a laptop computer), but when it is connected to the connection of the APs has failed and I begin to see strange IP addresses from the APs.
Oh, one more piece of important information: when I connect cables CAT5e cable on all floors direct to a laptop I can connect to the internet (the work of cables very well when it is connected directly to a laptop) but when connected to the failed to connect APs and I begin to see strange IP addresses from the APs.
HEPL!
I think I have the forum a status report on my post. As I mentioned in my last post, the problem has been as a result of lower cable at my provider. The network is running smoothly. Has been in place since last week when I replaced the lower quality cat5e cable cat5e cable.
A Board here please be careful and make sure you complete the cable. A bad end can lead to connection problems I discovered in this case when my team confidence terminated cable incorrectly.
Network up to & operational: Linksys WRT350N router without wire + 3 Linksys Wireless Access Points WAP4400N + Modem providing access to (1 computer (cable), 6 workstations (wireless), & 5 laptops (wireless).) Network to grow shortly.
Thanks to everyone who helped make this project a reality.
-
Bad connection WWAN H5321 GW with TMobile on a carbon X 1
First off, I installed a version of Windows 7 OEM, then grabbed all updates. I used the Lenovo driver for the card WWAN (downloaded the last one yesterday). I bought a TMobile, installed data SIM card and got a connection I can connect to and get data... for awhile. After about 5 minutes, the connection is very reliable, to the point that I can't get a page of results on Google. Coverage in my area is almost perfect, so TMobile swear that it is the laptop. Seeing that the driver is up to date, I have no other ideas.
Thanks for sharing.
Yes, these screenshots saying I'm right - your modem connects to the GPRS/EDGE network and you need to install a tool (for example logins) in order to define the type of network manually. If you decide to do the version after installation of AC, 5.93, as 5.97 is very bad.
To be more comfortable - ask your operator support team for their 3g network APN. Currently, we see epc.tmobile.com, but some carriers may have different APNs for types of different network and data plans. But the Web says that your APN is correct.
You can even check is type network T - Mobile 3g in your cocation or not using certain built-in OS commands.
-
That means "bad connections" warning to the average of the Mail account setup?
The Mail account setup dialog box, the works of autodetect IMAP, but after clicking "Done", a warning is displayed (see image), declaring "Thunderbird may allow you to get your mail using the supplied configurations." However, you must contact your administrator or your e-mail provider about these incorrect connections. See the Thunderbird FAQ for more information. ».
I checked the Thunderbird FAQ (or what is the information that I found) but there is no explanation of this warning.On the connection used:
-C' is a working IMAP with STARTTLS on port 143
-the server is using a self-signed certificate (not expired), which Thunderbird complains not in the warning
-with the help of a Setup from another existing SMTP account (no control in the Mail account setup dialog box)
So I ask myself, what this warning is really all.
Best regardsWatch dialog box seems to occur only if:
- There is an e-mail account, SMTP outgoing self-signed certificate
- The new e-mail account uses the only existing outgoing SMTP Protocol
This could be a default in Thunderbird 31.7.0, because there is only one such warning dialog to the configuration of the e-mail account that is used for reporting several different problems. The code (source Thunderbird: mailnews/base/prefs/content/accountcreation/emailWizard.js) power switches of the incoming and outgoing messages, but in this particular case, it seems to turn off all messages - which leaves just the text displayed in the screenshot - compare to https://support.mozilla.org/en-US/kb/server-doesn ' t-use-encryption
When you use a new profile without all accounts in Thunderbird 31.7.0, new account creation work without such a warning.
-
Hey, so I just got a new iPhone off of Ebay and everything was working fine until I decided to use wifi,
my iPhone cannot connect to the wifi connection when I'm in my room and cannot keep a stable connection in my living room where my router is located in
So far, IV ' e tried solutions like restart my router, then by restarting the phone etc.
Other home devices can connect to the internet very well except for my iPhone
So what is someone having the same problem as me, or at least have a solution to solve this annoying problem?
I would be very grateful
Hello, you can try these steps to resolve the problem. If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network
Maybe you are looking for
-
Using Thunderbird, I went on the file menu, chose New > folder, but the folder doesn't appear in my list of files. How can I create a new folder that will show up in my list of files? Thank you.
-
Hey guys,. I'm home from work today to find my form factor of Macbook Pro 2016 Slim on, closed in its case (hard case Booq). I bought it too. Still scratching my head as to why he did (potentially from a keyboard or trackpad wireless or maybe my Time
-
Vista for Satellite L600 drivers
Can someone help me to find drivers for vista for Toshiba L600? Don't list not all Toshiba Satellite L600 download sites.
-
Pavilion G4 w / AMD processor - where can I find a driver for the SM Bus controller?
Bought a G4 Pavilion - 1164CA and upgraded the HD with SSD and did a new install of Windows 7 x 64 Premium. The model has a processor AMD A6 - 3400M. Device Manager shows that a driver is missing for SM Bus controller. I checked the drivers HP page f
-
SG300-20 can't find IP address
I have a SG300-20 new I installed March 1, installation went well and she has acquired an IP address from the router (DSL modem) and I have accessed the switch installation and SNTP, new user, save the configuration and connected off Worked fine conn