Bad downloaded software

Similar Questions

• My TV will not restore via itunes. Tried 2 x - says it is downloading software, but does not work

  My TV will not restore via iTunes - says it is downloading software, but is not complete the restore

  If your Apple TV fails to restore via iTunes...

  • Check that you have properly followed the instructions for your model of Apple TV.
  • If this is not the case, already, try using a powered USB port.
  • Repeat the process, but this time try to connect the cable while iTunes is closed.
  • Repeat the process with another cable.
  • Try to restore the Apple TV on another computer at another location.

• need to download software for cyber shot DSC - H90

  Where can download software of Sony cyber shot DSC - H90?

  Hello mkorthaus,

  You can download the software PlayMemories home (WPH) from the link after choosing the appropriate operating system below.

  http://eSupport.Sony.com/us/p/model-home.pl?MDL=DSCH90&template_id=1&Region_ID=1&tab=download#/downl...

  Drivers required to connect the Sony camera to a computer are already included in the Windows operating system.

  If my post answered your question, please mark it as an "accepted Solution".

• Download software deskjet 1050a Asus

  Download software from site Web from HP that will allow my new Asus computer laptop info-send for my printer HP deskjet 1050a

  If Yes please go through stages with me because I need a little help.

  Thank you in advance.

  kenmare1

  Hi kenmare1,

  Download and install the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109412-2&cc=us&DLC=en&LC=en&OS=4158&product=5068681&sw_lang=

  Follow the installation steps thw until demand for plug in the USB, make sure that you do not plug in before that point.

  Shlomi

• Question of Smartphones blackBerry about a 'clean reload' Tmobile phone, ATT service. Download software for device ATT?

  Hello

  Phone: 8220 (from Tmobile) BB it says Tmobile on the phone.

  Provider: AT & T

  info from the inside of the battery compartment;

  PRD-004-17539 BlackBerry 8220 RBY41GW

  IC:2503 A-RBY40GW

  BT MAC: 00 23 7A 75 79 A5

  I did a lot of research, and I came to the conclusion that my BB is stuck in reset mode. Actually have a question and I also just want some reassurance.

  So first of all, my BB started resets itself automatically, as he has done before, (turns off and restarts, usually in a few minutes, I'm good to go).  Well this time that he did not return to a usable state.

  What he does; The Red led lights up for about 3 seconds, then turns off. Then, I get a white screen with a small clock top for a few seconds.  It's all just that, again and again.

  I removed the battery,... has not fixed the problem.

  I tried holding alt, cap key (also #) and delete. .. do not solve the problem.

  So, I just want to know if a 'clean Reload' is the correct step.

  Second, here's the question I have at & t service. The BB I use is tmobile. So I was wondering, since I will be clean/clear the phone, download software device from at & t instead of the Tmobile device software.

  All the notes I've read say to contact your service provider, or visit their site to download the software for the device of BB.

  Any help will be appreciated. Also, I would like to know if I need to provide more information about my phone.

  Thank you

  Changed to delete personal information

  You will need to wipe the appliance completely first.

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

  Once the camera has a white screen and the "507" error you can load the new OS.  It makes no difference what carrier download you operating system.  It is best to download the latest version of the device regardless of the carrier he published.  Here is a link to the most recent instructions including how to reload.

  http://www.BlackBerryForums.com/General-8200-Series-discussion-kickstart/207696-latest-OS-8220-4-6-0...

• I'm moving the standard Acrobat XI to a new computer, but the downloaded software seems incompatible with my serial number.  Help

  I'm moving the standard Acrobat XI to a new computer, but the downloaded software seems incompatible with my serial number.  Help

  your serial number is 6 groups of 4 numbers, find the serial number of your product Adobe quickly

• It is impossible to download software Acrobat pro dc because the "failure of the http request. What can I do?

  It is impossible to download software Acrobat pro dc because the "failure of the http request. What can I do?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• How can I download software Adobe, like Dreamweaver, without use of cloud to Adobe?

  Greetings,

  How can I download software Adobe, like Dreamweaver, without using cloud Adobe?. I need the application .exe to install this software on a PC, which is not an Internet connection.

  Hi Anderson,

  You can try to download Dreamweaver CC among the direct download links available at: http://prodesigntools.com/adobe-cc-direct-download-links.html

  Please make sure that you follow the steps mentioned on the page before you start the download.

  Kind regards

  Rave

• Have creative cloud for subscription teams, but can not download software

  I have a creative cloud for subscription through my school teams and tried to download photoshop and after effects by the Office of creative cloud but I still get a trial version, even if signed in. When I check my account on adobe.com, I see I have registration and I am registered on creative cloud Office but for some reason that I can't download software. My trial is now over and I always ask myself a serial number. My classmates, has obtained registration, but it worked well for them and no one seems to understand why it does not work. Can someone help me on this? did I miss something super simple and stupid? Thank you

  Hi gudrunjons,

  You can connect to www.creative.adobe.com & check by clicking on the "triangle reversed"(dans le coin supérieur droit), the amount of space allocated to you, "'.

  1. If it is 100 GB, please proceed to step number 3

  2 If this isn't 100 GB, this indicates that you have not yet accepted the prompt send you in your mail for the team, you can acceot he, then, product launch, at the bottom of the prompt 'renew your membership', an option of "buy this software" will be there, click it, connect & membership must be activated.

  3. check the host file for any input from Adobe:

  Windows:

  c:\windows\system32\drivers\etc\Host(open with Notepad)

  Mac:

  Finder/go/go to/etc/hosts

  If you find any entry from Adobe who took & the file must be made free of charge from Adobe. Once done, now try to launch the product, it should not ask for a serial number.

  Incase of any question, don't hesitate to contact or Inbox too private.

  Kind regards

  Baudier

• How can I download software I added serial number to my account. Lost the disk.

  How can I download software I added serial number to my account. I don't have the disk.

  When I go to my apps, it lists just them with their serial numbers, but no download link.

  I have gleened from the download instructions imply that I can only download apps that I bought online.

  What is the point of assosiating the series with my account if I can't do anything wth it? A glorified Notepad?

  do not hit notebooks glorified.  at least you have your serial number.

  If you follow the 7 steps you can dl a free trial here: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html

  and activate it with your serial number.

  If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

• How to download software for Elements6

  I have a Nikon D7000 and Canon G1X and Photoshop Elements 6 on an Imac. How to download software so I can read the files in Camera RAW 6 elements?

  There is no such thing. Sorry, your PSE is hopelessly outdated and support for RAW formats is always specific to specific versions of ACR, in turn specifically related to some versions. It was precise enough? Refer to this:

  Camera Raw plugin | Supported devices

  Applications of camera Raw compatible Adobe

  The long and short it is, that you need to update / purchase 11 PES.

  Mylenium

• ACS 5.2 upgrade - bad file software download

  Hello

  I'm trying to upgrade acs 5.2 with the patch 5-2-0-26 - 1.tar.tar.

  First of all it is not the right extension when downloading the file from the software download.

  then when I get 'patch install FTP of 5-2-0-26 - 3.tar.tar', I get the following error message:

  % File manifest not found in the bundle

  I think that the file is not damaged.

  have someone encountered the same problem and the set?

  Kind regards.

  Hello

  Rename the file 5-2-0-26 - 1.tar.tar 5-2-0-26 - 1.tar.gpg. I had the same problem and rename the file solved that problem.

  ZR

• Can't install downloaded software, receive the message error "Windows cannot access the specified device, file, or the path"

  Cannot install any software downloaded - says "Windows cannot access the specified device, path or file.  You can not have the appropriate permissions to access the item.  This happened after I went on a bad site and downloaded something accidentally and I was not able to do anything after that.  I have avast and avast kept popping up saying I've made to a site with malware and that it would interrupt - well these pop - ups have ceased and I was scanning my computer using windows defender (which did not find anything) - but I still have problems on my computer. Should what steps I take?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• iPad (64 gb, WiFi) Air2: could not be updated to 9.3.4 (error 1403, iTunes: damaged when downloading software)

  #1

  Hello!
  I have an iPad Air2 (64 gb, WiFi) that is running on iOS 93.3. I connected to iTunes and tried to upgrade to 9.3.4 that breaks down repeatedly.1)
  I tried to do the upgrade on three different computers (a Mac, Win two) using iTunes 12.4.3. ITunes always download the firmware completely (about 1.85 GB) file, and then says he's working on the file downloaded and said then the software was damaged during the download (err 1403). This happened several times and on several days.
  I could upgrade an iPad and an iPod touch (gen 5) 3 on one of the computers in each network without any problem, so the networks and iTunes seem to work fine.
  2)
  I tried to download 9.3.4 manually and install it. The file was downloaded to my iPad to iTunes, but stopped at halfway of the progress on the ipad and iPad bar was blocked in recovery mode.
  Recovery (and return to factory settings) in 9.3.4 has led to the above error.
  3)
  I downloaded 9.3.3 manually and recovered to that. Now everything works well again after restoring a backup-Conclusions:
  ITunes and my network have no problem or other devices would not have had the upgrade.
  There is no material error in my Air2, otherwise 9.3.3 recovery would not have worked.
  Since I've tried downloading several times there has only very little chance that the file was very damaged during the download. So what is wrong here? I searched on the net but not found an adequate answer.
  Thanks for any help!
  A.Borque

  PS: I need to translate German, so the actual messages provided by iTunes may be slightly different

  How to fix error 1403

• Unable to restore my iphone, it says download software and it took a long time then "cannot download software.

  I have a problem with that, first of all I can't activate my ipad and now my phone is disable bc of my friend, I downloaded itunes and connect my phone, it says software download but it took so longgg, idk if the internet was slow idk, so I waited then when things are going at the end of download it says "cannot download the software" tf? going onnn? haven't slept just to wait for it. PLEASE HELP PLEASE

  Take a look at this article, it should help you Get help with the Live - Support Apple iOS updates