Error: "disk is not formatted.

Similar Questions

• "" Switch USB SanDisk Cruzer 4 GB not format error "Windows could not format.

  Original title: Switch USB SanDisk Cruzer 4 GB will not format...

  Whenever I try to format it, it says "Windows could not format.

  According to the ability that she reads, 64 MB.
  File system: FAT (default)
  Allocation unit size: 1024 bytes
  Oh and I have Windows Vista. I have another flash drive even space and everything and it did not happen to her. All reviews are useful.

  Hello

  Try to format it in Windows Disk Manager.

  See the following steps:

  a. open computer management by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in the Navigation pane, click Disk Management.

  c. right click on the partition or drive that you want to format and then click on format.

• CD-Rom indicated that all disks are not formatted.

  All of a sudden (no major changes to the system) the CD-Rom on my laptop started to say all CDs (burned and commercial) are not formatted and that Windows is unable to read the disc. I reinstalled the drivers and windows updates, but the problem is still there. Thoughts?

  1 swap hunt for a well-known work. OR
  2. put the drive in another computer. OR
  3. start with a bootable CD as the disc to install XP or a Linux Live disc and see what happens. If the drive cannot read a bootable CD (and this will happen outside Windows), then you will know for sure it is a defective material. MS - MVP - Elephant Boy computers - don't panic!

• Can't get my floppy drive to save a disk error: disk is not rewritable.

  Original title: FLOPPY ERROR.

  I can't get my floppy drive to save on a disk, I get the error message saying disc one is not rewritable. I use it for embroidery

  how you're framing your question and the answer

  is a little hard to follow.

  is this correct: you have a machine that you insert a floppy disk in

  that you set up with data on a computer.

  the machine cannot write to the diskette or the computer cannot write

  on the floppy?

  or what?

• Utility disk will not format card Cfast2?

  I have some cards from Cfast2 I need to format it in disk utility, however it can complete the process, showing "invalid name. The operation failed "."

  The card was written by Arri cameras with their system of file owner. I tried other maps and types of format different but still see the same result. Yosemite and other previous builds of BONE that was never a problem.

  

  Unfortuantely, I came across the same type of problem. This is the best information on what has changed in the disk utility in El Capitan: http://macperformanceguide.com/blog/2015/20151008_1222-SoftRAID-vs-DiskUtility.h tml . I am currently trying SoftRAID(4) 5.5 and it works so far. I hope this helps!

• error "disk is not created for your region."

  Hello! There was a problem with the Encore CS6 application. The finished project is exported to the image of the DVD, the process completes successfully. When you try to play in regional options "editing of the ' are not included.

  The problem is solved with respect to playback on a PC. Now check the operation of the disc in the drive. A new question arises. For what purpose, it is possible to create an image file? Only for the purpose of the store at the end of the project?

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• Windows could not format a partition on disk 0 - 0 error code 80070057 x

  Original title: error code 0 x 80070057

  Windows could not format a partition on disk 0. The error occurred during the preparation of the partation selected for the installation of 0 x 80070057 error code.

  I recently bought components in order to build a new PC in Win 7 64 bit.

  I've built a lot of PC in the past, don't wait no problem that I couldn't cope so.

  I got this this same exact error message and have been pulling on my hair for the last two weeks to try to solve.

  I even bought a new motherboard, processor and HD and got the same error. Urgghh!

  Well, when I finally realized what it was that I was so relieved and so angry at the same time!

  IT WAS THE SATA CABLE! 1

  I've never had a problem with a SATA cable before so I never even thought to replace.

  One who turned out to be defective was one of the thinner, but I used a lot of them in the past without incident.

  This may or may not be the cause of your problem, but try it

  Have a great Christmas and good luck for the new year

• Error - Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes. If the drive is not formatted, you must format it before you use it

  Original title - Windows cannot read blank disc

  When I insert a blank DVD-R disc for burning, an error is indicated - "Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes." If the drive is not formatted, you must format it before you use it. "So I can't burn a DVD-R disc... But if I use the DVD-RW drive, it can be burned smoothly without any problems... Windows cannot recognize only the DVD-R disc... My DVD - RW driver is Sony Optiarc AD - 7280S. When I use Windows 7 without problem was found in the burning a DVD-R disc. But after using Windows 8, I can't burn a DVD-R disc. So please help me...

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a problem with the disc.

  As you mentioned that you have tried the steps of troubleshooting mentioned in this thread.

  I suggest you run the Fix-it tool and check if it helps.

  This tool diagnosis and repair CD or DVD drive issues, when you can not burn or play CD or DVD discs when a disc is not found, not available or not connected.

  See the link below.
  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems?WA=wsignin1.0

  As we have tried most of the troubleshooting steps to resolve this problem, and if the problem persists after you run the tool fix - it also. So, I suggest to get in contact with equipment manufacturers , because they will be the best person to help you.

  Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.

• Error msg "this disc cannot be used to store a picture Windows complete PC backup because it is not formatted with NTFS.

  Original title: what is NTFS?
  When you try to do a full up, I get the error msg "this disc cannot be used to store a picture Windows complete PC backup because it is not formatted with NTFS.  My OS is Windows Vista Ultimate Edition.

  What is NTFS?

  What type of disc to I use to make a backup?

  Hi Heather_604,

  There are two ways you can do: you can convert the external hard drive to NTFS, or you can format the external hard drive to NTFS.

  Personally, I suggest that you format the external hard drive, but this will remove all data from the drive. Temporarily, you can copy what is on the hard drive on your C: drive if you have enough free space (or DVD) - once the external hard drive is formatted NTFS, you can copy everything back.

  Formatting disks and drives
   http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

  Examine everything under view all. also check How can I add a new HDD? If Vista not recognize the external drive in see computer management - disk, the link create and format a hard disk partition management:

  Create and format a hard disk partition
   http://Windows.Microsoft.com/fr-FR/Windows-Vista/create-and-format-a-hard-disk-partition

  If you want to convert the external hard drive to NTFS, see the link in my original answer and:

  Convert a FAT32 to NTFS disk in Windows Vista
   http://News.Softpedia.com/news/convert-a-FAT32-disk-to-NTFS-in-Windows-Vista-51792.shtml

  Converting an external hard drive to NTFS
  (see r. v. White second after correction of typo in his post punch)
   http://Forum.Soft32.com/Windows/convert-external-hard-drive-NTFS-ftopict341077.html

  If you convert the drive to NTFS, I always recommend that you copy the existing data, as I described for the formatting of the disk, just in case...

  Kind regards

• Error "the dynamic disks are not supported by this operating system." what configuration Raid 0 (striped) readers.

  I have my operating system installed on a single disc, and I bought two additional discs I want to implement in a Raid 0 configuration. I'm going to administrative tools > computer management > disk management > right-click on a single disc and select the new striped volume > add the second drive and fill the dialog box until I get to the part where the formatting is supposed to start. Then I am stopped by an error that says "the dynamic disks are not supported on this operating system."

  Who says that hard drives, I bought are not compatible with vista interlacing or it says that vista can not the striped disks. What is the problem?

  You need to configure raid 0 before installation of win, you cannot "convert" s simple drive to the part of a matrix of blocks.

  In general this is not a good idea to use software raid, too a overload the CPU. If you want to raid, invest in a dedicated hardware raid card, which for a decent cost probably more than your motherboard

• Error message: "could not cop files. Make sure that the target disk is not dead", during the installation of the drivers scanner Epson Perfection V500.

  Original title: the scanner driver update problems.

  Problem: I am trying to install a driver for an Epson scanner update.  I get the error message: could not copy files.  Make sure that the target disk is not read-only.

  I'm running Windows XP Home edition.  Scanner is an Epson Perfection V500 Photo.

  What I did:

  • A release with the support of Epson.  They tell me that I have the admin rights.  However, I am the administrator and log on as administrator
  • I downloaded the epson driver update, which is an executable zip file.  I right-click on the file, select Run As..., opt to run it as an admin user, enter my password and select run.  The files are decompressed, but at some point in the installation, I get the message "couldn't cop files.  Make sure that the target disk is not read-only.  (Target is C:\)
  • Furthermore, I installed this driver successfully on my other computer that is running Windows XP Professional

  Why not copy the driver files?

  Hi Passport35,

  You can try the following steps and check if it helps.

  Method 1:

  You can try running the fixit article and following cjheck, if it helps.

  Diagnose and solve the program installation and uninstallation problems automatically

  Method 2:

  If the previous step fails then I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  a. click Start, click Run, type cmd in the Open box and then click OK.

  b. at the command prompt, type sfc/scannow, and then press ENTER.

  Note: the scan may take a while, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Wait for the analysis of complete and then check if you can install the drivers.

• PC Hung and will now restart not [XP Pro SP3]. SYS error at startup as follows; Lsass.exe - system error. The endpoint Format is invalid.

  Original title: PC Hung and will now not restart not [XP Pro SP3]

  PC Gardner - [open Excel, open outlook, being viewed in PDF and word doc being edited].

  Restarted, then - loading SYS error window at startup as follows; lsass.exe - system error. The endpoint Format is invalid.

  Can not very well, or at the end of the message have to turn it off. Tried to reboot several times, same result.

  Just before this happened was a dialogue window appear on my PC, which indicates that Microsoft wanted to investigate problems of software they had observed on my PC that I had not sent the reports to. I approved this request and they took the reports...

  Am currently bimbling turn of safe mode with networking.

  Any smart people able to help me please?

  Thanks George

  Hello

  We will try these steps and check.

  Step 1: Try using some know last good configuration and check.

  Step 2: System Restore from safe mode or safe mode with network.

  Reference:
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

• When you try to upgrade Windows Vista to Windows 7 I get this error: "Windows could not retrieve information about the disks on this computer."

  original title: problems of Windows update/upgrade

  I'm currently trying to install Windows 7 on my desktop running Vista.

  Whenever I run the Setup it comes up with the following error: Windows could not retrieve information about the disks on this computer.
  I already put the virtual disk on auto and rebooted several times. I get the same error.
  Also, I tried to update my computer by using the windows update thinking that would help... Windows update decides to not work either! It comes up with the error: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.
  gain, I restarted and it still does not work.
  I am currently running Windows Vista 32 bit on my desk (I thank God for my laptop!).

  Help!

  First, run Windows 7 upgrade advisor:

  Windows 7 Upgrade Advisor
  http://Windows.Microsoft.com/UpgradeAdvisor

  Note the results and make sure to follow the steps.

  Try to install Windows 7 using the USB

  Install Windows 7 with a USB memory key
  http://www.winsupersite.com/article/Windows-7/install-Windows-7-with-a-USB-memory-key

• My computer won't allow me to access my files on my portable hard disk without error appear "you must format the E: drive before using it. How can I fix this please!

  My computer won't allow me to access my files on my portable hard disk without error appear "you must format the E: drive before using it. How can I fix this please!

  Try to scan your driver with anti-virus, also try to throw the disc looking for this driver and as you try to run the following tools:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/