BAD Error Message CARTRIDGES: (this is for my printer 6180 HP at the address 7 years)
I get an Error Message for my printer HP C6180 age of 7 years: EVIL of CARTRIDGES... Use the introductory cartridges that were shipped with your device. Yes well! He is seven years old. These cartridges are long gone... and no one does... I mean that nobody has the answer on how to solve this problem. I confess that I used ink ink farm.com (good valve and it is working great int the past). HP said... because I did not use their ink it touch the print head. Totally unfair! Why you would design a unit fully operational to recognize ink is not original and then close. Oh... I remember... 101 economy... It's called Obsolecence of Design!
I spent $40,00 on the farm of ink... ink then went and has spent another $100 + on Original HP ink Sams Club (got Xl ink) and it still does not work. I called Hp, and although the technology was friendly and understanding... they have not a clue. You have to be kidding me. I went to Sams Club and bought a new HP 6700 Officejet for $114,00... it is up and works fine... but work once beautifully C6180 is now sitting in the trash... and I'm stuck with a value of $150.00 of ink unused... After spending a whole day, at this point leave it outside in this forum. Thank you HP. I really wouldn't buy another HP printer, but I'll let the lesson be: only use original ink manufacturing. ... I think that the cost of it is... A SCAM! JUST VENTILATION!
Hi Limodriver,
Glad to hear that you managed to Exchange unused old cartridges with new cartridges for the new printer.
Thank you for your update.
See you soon,.
Bryan
Tags: HP Printers
Similar Questions
-
After trying to download updates from Microsoft to start my computer displays this windows explorer.exe error message...
C:\windows\sys32\vsinit.dll--Il you are missing a necessary root certificate.
As a result of this error message, I noticed that can't copy or move existing document files to any drive. If I try to open a file backup quicken computer program stops and I have to restart the computer. I tried to download other updates of Microsoft but they do not have to install, based on the error message above. I do not have the xp software disk has been loaded on the computer when you purchase through HP and I never created software XP backup discs.
Any suggestions on how to fix the missing root certificate error message for this problem. Appreciate the help, and thanks for your suggestions to solve this problem.Hi ronjul2,
Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to a third party of program, ZoneAlarm, installed on your computer. Try to uninstall and reinstall the software. For more information about this error, you can visit the Support of ZoneAlarm.
Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Please let us know if this helped.
Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
help with this error message (load needed DLLs for kernel)
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error message load needed DLLs for kernel in Windows XP
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
· When you get this error message?
Refer to the following articles:
Error: load needed DLLs for kernel. : http://support.microsoft.com/kb/326671
http://support.Microsoft.com/kb/812450
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Error message "Preview not available for this file.
I use LR 4.4, but it did not work properly since I got my new camera (Canon 70 d). When you try to import, I get the error message "Preview not available for this file. I got lucky better connection of the device with a usb cable, which allow me to see the jpg images, but he wouldn't let me see the raw images (.cr2). I would solve this problem by opting for the LR5?
I use LR 4.4 on a Windows 7 PC.
Thanks for any help that can be provided.
Robert
Support for the Canon 70 d was introduced with LR version 5.2. See the link below.
-
Equium A60 won't start - error message: Load needed DLLs for kernel
The problem is the following; in an attempt to start, I get an error message: "Load needed DLLs for kernel.
Re-install? I made this countless times.Following forums, I discovered that this could be a memory problem. However, my laptop has a built-in RAM and I can't change it. I changed that in the expansion without result slot.
Any suggestions on how to deal with this problem will be greatly appreciated.
Blessings on you.Hello
Richard's right. Also check it please this document http://support.microsoft.com/kb/812450/en-us maybe it helps!
-
My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services. I've tried everything and my router is intact. My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.
original title: Wireless not working not
Hello
1 have had any changes made on the computer before the show?
2. what operating system is installed on the computer?
Method 1:
Check the link and try to run the troubleshooter to check if it helps.
Windows wireless and wired network connection problems
Method 2:
Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
I received the following error message: Generic Host Process for Win32 Services error on commissioning. Reading the Forums help. I have all the Service Packs and the automatic updates of Windows XP. More Norton AntiV and utilities. What can I do as I am all updated and I have Norton? KB - 894391 fix Windows Will interfere with what anyone, even if I have already? Should I run Windows Essentials?
Thank you!
Well, I'm quite sure that committed Microsoft Support Engineer 'expert' is just send you on another of their many wild goose hunting.
Surely, Imran M will come up with some other ideas - it's their job and they are the ones that Microsoft hired as their "experts".
Tell us exactly the message that see you in its entirety, follow this:
No matter what you use for malware protection, follow these steps:
Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:
Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/SAS will probably report a lot of tracking cookies and you can just let him delete them.
Then stand out my answer as the 'response' (which you do) for other people will see the topic is not resolved and you offer other ideas.
-
Please can anyone offer help - whenever I start my PC it freezes
then displays an error message "generic host process for win32 services has.
encountered an error and needs to close. »In this error message, I get more information:
szAppName: svchost.exe szAppVer: 5.1.2600.2180 szModName: ntdll.dll
szModVer: 5.1.2600.2180 offset: 000122bamore information:
C:\DOCUME~1\Joe\LOCALS~1\Temp\WERd9dd.dir00\svchost.exe.mdmp
C:\DOCUME~1\Joe\LOCALS~1\Temp\WERd9dd.dir00\appcompat.txtI tried a lot of things: update drivers, run Ccleaner to check the registry,.
checked for malware, Virus, uninstall xp service pack 3... Is there
anything else I can try?After I clicked through the error messages above appears the taskbar
Crash, then reappears, but with graphic reduction (gray color)I checked "Event Viewer" in "control panel" from here I get
the following error message:Failed application svchost.exe, version 5.1.2600.2180, failed module
ntdll.dll, version 5.1.2600.2180, fault 0x000122ba address.0000: 41 70 70 6 c 69 63 61 74 Applicat
0008: 69 6th 6f 20 46 61 69 6 c ion Fail
0010: 75 72 65 20 20 73 76 63 ure svc
0018: 68 6f 73 74 2nd 65 78 65 host.exe
0020: 20 35 2 2 31 32 36 30 5.1.260
0028: 30 2 32 31 38 30 20 69 0.2180 I
0030: 6th 6f 20 74 64 6 c 6 c 2nd n ntdll.
0038: 64 6 c 6 c 20 35 2e 31 2nd dll 5.1.
0040: 32 36 30 30 2 32 31 38 2600.218
0048: 30 20 61 74 6f 20 66 66 0-off
0050: 73 65 74 20 30 30 30 31 the value 0001
0058: 32 32 62 61 22baalso an another error at the time of the accident
0000: 42 75 63 6 b 65 74 3 has 20 bucket:
0008: 31 32 39 36 37 35 38 33 12967583
0010: 36 0D 0 to 6...Fault 129675836 bucket.
I am extremely grateful for any help, this problem is about to drive me
crazy!I solved my problem...
To temporarily disable closing kick, after that the warning popup will appear, I went the prompt commands and typed in 'shutdown-a' so I could help out.
Then I went in under the Application Event Viewer and saw that some services weird I don't need anyway did not start because they had missing information/dll registry info. It was originally the svchost.exe service to fail (and default recovery for this is to reboot)
I stopped the weird service (in this case, it was Hello) because I didn't need anyway, and went into the properties of this service and past earlier in "Manual" "automatic".
Good luck
-
cannot follow the links-error message said "this operation has been cancelled due to restrictions in effect on this computer
Hello
1 are. what links you referring?
2 are. links to which application you referring?
3. what browser do you use to open the links?Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
-
Original title: uninstall the program... Error message says: this patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package__
I'm trying to uninstall Microsoft Silverlight. I used Windows Installer found in the control panel to delete, however, when I try to remove the program I get the error 'this patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.'
The program itself shows is no longer in my program list, and when I visit the Silverlight Web site may not detect an existing version on my system. But when I try to download the latest version, that he says could not be installed because I need to remove the previous version first... I'm going in circles and get no where... I downloaded Revo Uninstaller Pro but it also had no effect... I'm stuck!
Hello
The issue of Windows 7 you have posted is better suited for the public on the Silverlight Forum. Please ask your question in the forum Silverlight Installation and configuration.
http://forums.Silverlight.NET/forums/13.aspx
Kind regards
Gaurav Prakash - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think. -
When I try to download CC or PS I get an error message. I paid for CC two days ago and always doing this to me. I rebooted several times with the same result.
This is the message:
We are sorry. Something seems to be wrong on our end. Please try again later. If it continues to fail, please contact . customer support
Hi zelsha,
Please try to download from the direct link: http://prodesigntools.com/adobe-cc-direct-download-links.html.
Please follow the very important instructions before downloading.
Kind regards
Romit Sinha
-
I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?
Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.
-
I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please
only title bar opens and nothing else... Please help
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
Also check the cookie exceptions.
-
Original title: my laptop has lost all printers and windows & no longer recognizes them. Help! I can't print anything
I use my laptop computer in a docking station. I took it out to take for a trip and when I got home I plugged it back (as I always do). Just before the trip, I have upgraded to Windows 7 and all my printers were working very well. When I got home and pluged again, Windows does not recognize one of my printers. When I try to add printers a say8ing error message "Windows can't open add printer." The local print spooler service is not running. Please restat the spooler or restart the machine. "I tried to restart and turn off the printer, etc. Can someone help me?
Hi RobynGP,This may occur if the print spooler requires other services, and these services are not running. To resolve this issue, follow these steps:1. in Services, right-click on print spooler and then click Properties.
2. click the Dependencies tab. The first box list all system services that must work for the print spooler start. These are dependencies.
3 make a note of each service, click OK, and restart each service on which the print spooler is dependent, if the service is not already started. If a service is not started, right-click, click Properties, and then make sure that the startup type is automatic.Let us know if this helped.
Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
error message: "windows could not find a certificate to connect to the network.
My NetGear wireless icon shows this error message "windows could not find a certificate to connect to the network.
Hello
Did you change your computer before this problem?
You can follow the procedure in the article.
Unable to connect to the network: Validation and certificate in Windows XP and Vista errors
Alternatively, you can contact Netgear support to improve assistance in this regard.
Welcome to the NETGEAR support
Maybe you are looking for
-
Is the latest version of Itunes, one need to use?
I always use the version 11, as he was Darling 'bar' side that shows my library, store and playlists, column 'browser' as well. I remember that some of the more recent version have removed some of the above features and I was wondering if the latest
-
How can I remove the status bar?
I just updated Firefox and I noticed the status bar in the lower left corner of my window. I find this bar to be extremely annoying and I can't find the activate option off as in the old Firefox.Where can I disable this feature?
-
Toshiba 5200-903: TV-out
Hallo My English is not very good, and I hope that you will understand me. First, I'll tell you a few basic details of my system:Material: Toshiba S5200-903OS: Debian Linux Kernel 2.6.15 - 1-686 I want to use the TV-out on my system. I need it especi
-
I cannot start my computer. It is show as bootmgr is missing... Even he is not able to detect the boot device so that I can start it from a disc.plz help.
-
where can I find this driver...