Bad Image-C:\Windows\system32\LZ32.dll with Windows 7

Similar Questions

• Rstrui.exe - bad Image of the application or DLL C:\Windows\System32\Wbem\Framedyn.dll is not a valid windows image. AND the exe task manager. -Bad guess. The application or DLL C:\Windows\System32\VDMDBG. DLL is not a valid windows image.

  I use WIndows XP.  After that THINKPOINT is presented on my system, I have not been able to access my task manager or restore my system to an earlier date.

  I have checked Kellys Korner and various other suggestions on the internet, but have had no luck with anything.

  It shows that the HKEY value for the Task Manager is set to 0.  Don't know if that helps.

  I BELIEVE I have the THINK POINT removed from my system.  I use Microsoft Security, Ad-Ware and Malwarebytes Anti - Malware.  Between the 3, it seems I have everything.

  But now I can not restore my system, or use my TASK MANAGER.

  Help would be GREATLY appreciated.

  Thank you!

  Bindifer

  Think like a malicious software...
  It infects your system and is not to be found and removed.
  What are you most likely to use to find and remove malware?
  Internet, Google, Task Manager, regedit, restore the system command prompt, etc...
  The malware is often afflicts one or more of these components to try to trick into thinking you need to perform a system restore, a repair facility, or even to reinstall your XP from scratch.  None of these things are necessary since you can usually just to thwart malware.
  If the referenced files are completely absent from your system, you will see messages like this when you try to run the applications:
  Taskmgr.exe - Unable to locate component
  This application has failed to start because VDMDBG.dll is not found.  Reinstalling the application may fix this problem.
  Rstrui.exe - Unable to locate component
  This application has failed to start because framedyn.dll was not found.  Reinstalling the application may fix this problem.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  If the referenced files are present on the system, but somehow corrupted, you will see messages like this when you try to run the applications:
  Taskmgr.exe - bad Image
  The application or DLL C:\WINDOWS\system32\VDMDBG.dll is not a valid Windows image.  Please check this against your installation diskette.
  Rstrui.exe - bad Image
  The application or DLL C:\WINDOWS\system32\wbem\framedyn.dll is not a valid Windows image.  Please check this against your installation diskette.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  These files are part of the file 3498 who cares about Windows File Protection, so unless the WFP is also broken it is likely that files are missing completely (you get a different error message).  What is more likely is that the files are somehow corrupt or have been replaced by incorrect files.
  Assuming that XP is installed on your C drive and in the windows folder, XP keeps copies of 3498 files that he cares about this issue:
  c:\Windows\System32\dllcache
  On a health care system, Windows File Protection keeps track of 3498 protected files and quickly and quietly replaces all the files in the list that appears missing from the backup folder.  File protection Windows will not replace the files if they are somehow corrupted or replaced by bad files.
  You can simply copy the backup files in the dllcache folder in the folder where are the suspects or missing files.
  Using Explorer, navigate to the folder c:\windows\system32\dllcache and individually to copy the backup files in there and then navigate the folders where the suspect or incorrect files are and paste in the copied files.
  Depending on your installation, you can also find copies of the files in this folder:
  c:\windows\ServicePackFiles\i386
  Answer Yes, if you are prompted to replace existing files.
  Test your functions now and then to reboot your system to make sure the changes 'stick', and then fix any problems.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• "Winword.EXE - bad image" "C:\Windows\system32\bitsprx532.dll is not designed to run on Windows or it contains an error. Try the program mode.

  Original title: 'Bad image 32 system error'

  Error window opens "Winword.EXE - bad image", "C:\Windows\system32\bitsprx532.dll is not designed to run on Windows or it contains an error. Try fashion program at new etc. etc."

  This happens at startup when programs open ie. audio and whenever I try to open a program, in this case MS Word. I click the OK button several times and he goes and allows me to work in the program.

  It seems that the C:\Windows\system32\bitsprx532.dll file is related to malware.  Examine for example the Uploader on VirusTotal.com and checking the results provided here.

  Scan your system with the free version of MalwareBytes AntiMalwareand see what it finds.

  Check with Sysinternals Autoruns for entry autostart referencing bitsprx532.dll and validate its location (in the autostart list).

• Opens the error window 'Winword.EXE - bad image' C:\Windows\system32\bitsprx532.dll «»

  Error window opens "Winword.EXE - bad image", "C:\Windows\system32\bitsprx532.dll is not designed to run on Windows or it contains an error. Try fashion program at new etc. etc."

  This happens at startup when programs open ie. audio and whenever I try to open a program, in this case MS Word. I click the OK button several times and he goes and allows me to work in the program.

  Word:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861096.aspx

  Word Help Forums at the link above.

  They will help you with your question Word when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Upgrade Windows 10: error called "LogonUI.exe - bad Image C:\Windows\system32\LMIinit.dll.

  I have a Windows 7 Fujitsu Lifebook (5 years). I tried to update to Windows 10 without success. Finally after a Windows7 update and then upgrade Windows 10. Success! Remotely, the company THAT THIS guy decided that I had to update W10, now all I get is "failure in the snp nonpaged area - uvc.sys" the laptop then restarts auto and trying again and again. Looking at updates successfully I see there's a Windows 10 call successful as well as failed. I did a reset to, but who brought me back to Windows 7.  That's life.  However, when I close I now get an error called "LogonUI.exe - Bad Image C:\Windows\system32\LMIinit.dll if the other is not designed to run on Windows or it contains an error." Try to install the program by using the original installation media".

  With all the man hours spent the last week and a bit on this point, I have to stay on Windows 7 and when the thing dies completely invest in a new (if my boss allows me)!

  This my friends, is his last chance, can someone help me.

  Kind regards

  Sue

  Hello

  I realize has the inconvenience that you are experiencing with the installation of Windows 10. I will definitely help you with this.

  I suggest you refer to the suggestion created by Andre Da Costa in the link mentioned below:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-fix-Windows-10-setup-failure/eba3c864-d9fe-4F8E-9468-81b1f89473ed

   

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• 'Bad image' of Windows XP Start message

  I mean bad image error - services.exe - watch DLL startup windows\system32\pavwait C:\. DLL is not a valid windows image. My PC starts after I clicked OK about 20 times. Have you tried troubleshooting from microsoft Web site support various fixes but the error persists. Can any advise how to solve this problem!

  You run Autoruns and use the search feature (CTRL + F) to find pavwait.dll in the list? Once you find it, uncheck the box next to the line item.

• Whenever I start my laptop, this message appears: DWM - Bad Image C:\Windows\system32\d3d10_1.dll

  Whenever I start my laptop, you'll see this message:

  DWM - bad Image

  C:\Windows\system32\d3d10_1.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support

  Please help me with this question

  Thank you

  Shows generally a problem with DirectX see if this previous answer helps

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/system-error-d3d101dll-and-d3d9dll-are-missing/12b3fd74-1083-4193-BBBC-413fdf11edd7

• Bad Image C:\windows\system32\WTSAPI32.dll is not designed to run on Windows or it contains an error

  Hey,.
  Everytime I open an application I get the following message
  C:\windows\system32\WTSAPI32.dll is not designed to run on Windows or it contains an error
  The program of all the work after clicking on ok
  This has happened since my last update automatic
  Im running a fairly new HP with vista home premium 64-bit
  This is not the first time that this happens and im HD crashed a few weeks ago.
  So basically, it is a clean installation, a few weeks ago.
  IM thinking it is a 64 bit to 32 bit problem accentuated by the updates but I ng3epa have no idea
  Help

  Hi, cdg59!

  It seems that your system is damaged.

  You might want to try the suggestions in this post: http://linenbach.com/tiki/tiki-view_blog_post.php?find=&blogId=1&offset=60&sort_mode=created_desc&postId=465 that talks about how to solve problems with wtsapi32.dllprecisely.

  Alternatively, you can look over The system in Vista Recovery Options (http://windowshelp.microsoft.com/Windows/en-US/Help/2b3724d1-f4ad-5b26-16dc-3e9e66f4be5e1033.mspx), specifically Startup Repair (http://windowshelp.microsoft.com/Windows/en-US/Help/5c59f8c1-b0d1-4f1a-af55-74f3922f3f351033.mspx).

  Please, let us know if this solves your problem or you need assistance!

• Bad image error C:\Windows__System32\itss.dll

  I get an error from the bad image by trying to use my drawing tools software.  It has something to do with the itss.dll.  We tried all possible options.

  Here is the error that is displayed.

  DXP.exe - Incorrect Image

  C:\Windows\System32\itss.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  Any help will be appreciated.

  Thank you

  Albert

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon.

  Mick Murphy - Microsoft partner

• Mistakes of bad Image of Windows XP on startup

  Here is a list of the errors I receive at first upward:

  Rundll32.exe - Bad Image
  -application or DLL c:\WINDOWS\ilaqucad.dll is not a valid windows image. The text is the Setup disk.

  Rundll32.exe - bad Image
  -application or DLL C:\WINDOWS\abdsdmsg.dll is not a valid windows image. The text is the Setup disk.

  RUNDLL
  -module error loading specified ofqsi.dll not found

  RUNDLL
  -Error loading C:\WINDOWS\ilaqucad.dll
  %1 is not a valid WIn32app

  RUNDLL
  -Error loading c:\WINDOWS\abdsdmsg.dll
  %1 is not a valid Win32app

  Some of them are not pop up until I click OK on the previous errors.  I have no more of the Setup disk.

  What should I do?

  Part of the problem is if you configure the computer to start in a clean boot state, then things work OK (unlikely), there are no instructions that tell you what to do but then restore your computer to a normal state and which does not solve anything.

  Is that sort of thing pretty good work for you JoshB_2011 here?  Of course, this is not and he won't - ever.

  Is it supposed to be some kind of magic that happens when you start in a clean boot state, which makes all the problems disappear, then you go back to a normal state and all is well?

  To do something between these two things... and that's the "Troubleshooting" part... There is no included troubleshooting.

  I had read it all through (it may be not a good idea at first), then apply it.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• How can know you if you have a bad image of Windows 8?

  I wonder to reinstall Windows 8, Windows 8, 1 and all my applications for the third time on a XPS 8700 I got in November. I thought that my image is bad is because the system will not install the version of Dell and Dell recovery created backup to work with Windows 8.1. The evidence is that the patch worked on another system. I'm sure that was the case, but it's not the same to know exactly what the problem with my system. Is it possible to see if an image is good, without having to take hours and hours and hours of time at it (to possibly find out that wasn't the problem after all).

  I use Windows 8.1, so there is no refresh of the operating system. I have a bootable backup, I can use, but this is still going to cost me a lot of time to get the system to date and supposededly it will not work because he did a bad image.

  If you run an installation on the settings of factory or Dell Media backup and restore, it's probably a bad image. I have not seen a good setting for all Dell Windows 8 systems and so recommend clean installation with a .iso Windows 8.1 forget Dell backup and recovery fully.

  If you can get the follow-up .iso Windows reinstallation Guide / a Clean Install of Windows 8.1:

  http://dellwindowsreinstallationguide.com/

  And use these workarounds:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows-8-1/Microsoft-product-activation/

  If you can not get a .iso 8.1 Windows and that you or a friend have a license to retail for Windows 8.0/8.1 of the same version then follow the solution here:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-ISO/

  Otherwise, you will need to look for non-official sources.

  If you would rather not search through unofficial sources then you can a DVD of reinstalling Windows 8 request from Dell by filling out this form here if you are in the United States or to the CA:

  http://www.Dell.com/recoverymedia

  If you are in other areas, call Support Dell technology as they have not extended the courtesy of the form of support to other regions.

  Note Dell only you media of Windows 8 and Windows 8.1 not to cause road blocks Microsoft imposed for difficult Windows 8.1 upgrade. The Windows reinstallation Guide therefore also explains how to clean install Windows upgrade to Windows 8.1 and 8.0 as cleanly as possible, but direct clean install is preferable.

• LogonUI.exe - Bad Image C:/Windows/system32/HID. DLL

  The title of this post appears on my Windows Vista Home Basic PC when I start it and after I connect. C:/Windows/system32/HID. DLL is not designed to run on windows or it contains an error. Ive looked around the internet for a solution, the only real solution I found was to search for cmd, do a right-click Run as administrator and type sfc/scannow, or something like that. Then he did some stuff and he later said a few corrupted files found but has been unable to remedy. So, how to fix this?

  Hello

  The program SFC.exe writes the details of each operation audit and each repair operation in the CBS.log file. Each SFC.exe program entry in this file has a [SR] tag. The CBS.log file is located in the folder %windir%\Logs\CBS.

  Check the log file and post the logs here so that we can check what exactly is causing the problem.

  Refer to this article for help:
  http://support.Microsoft.com/kb/928228

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• I get a pop withfollowing text: explorer.exe BAD Image, c;/Windows/System32/SyncCenter.dll Couls someone tell me how to get rid of this nuisance? Thank you

  Pls let me know...

  Hi Hermann Fuchs,.

  Looks like it could be an infection. Please see the following:

  How to get rid of malware

• Protect S100 - bad image quality on an external display with Windows 7

  I just installed Windows 7 but have lost my projector - external source - FN + F5 functionality
  It seems to work, but a bad quality image is on the screen and is then lost less than a second

  Are there drivers available for Windows 7, I need or it's another question?

  Appreciate any help

  Hello

  You have installed a display driver on your laptop? I doubt you will find a driver for Windows 7 at the moment, but in most cases, the driver for Vista works on Windows 7 too.
  Check it!

  Do you really need Windows 7 or you installed it? It s not released yet and at the moment, the socket driver is not very good.

  Welcome them

• Error message: Bad Image: the application or the DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette.

  I was in Firefox, but I left. Soon I opened it again, it
  installed updates and this message appeared. I tried
  parse the file, research in this area and everything less
  reinstalling Firefox (which each person with this)
  problem tried but it didn't work.) I installed
  Firefox by USB, not a floppy disk and I don't have
  It is with me, so I can't check from here. What I should
  do to solve this problem?

  Do a clean reinstall and download a new copy of Firefox since http://www.mozilla.com/firefox/all.html and save the file to the desktop.
  
  Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
  
  Do not remove personal data during the uninstallation.
  
  It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  
  
  
  You can skip the step to create a new profile, which is not required on this issue.

  See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  You may have a malware problem, if you get pop - ups not related to opening or are redirected to unwanted Web sites.
  If this is the case, then do a malware check with a few different programs.
  Each program is different malware, if you need to use more than one program to analyze.

  Make a check of malware with a few programs to scan for malware.
  
  You must use all of the programs, because each detect different malware.
  
  Make sure that you update each program to get the latest version of the database prior to scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
  • http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page

  See also 'Spyware on Windows': http://kb.mozillazine.org/Popups_not_blocked and what to do when searches take you on the wrong search site