Bad performance of laptop

Similar Questions

• Why games are bad for the laptop? and what is the reason?

  Please can you help me I bought a series of naw computer hp laptop Pavilion g6 and I want to keep it quick and clean and no problem in

  the problem is I like to play to the laptop... my mom tell me that the games are bad for the laptop, so I won't know what is reason to make bad games for laptop?

  with

  my respect; ruaa17

  ..

  Hello

  Probably your MOM is right. More than 90% (or more) laptops are not good for modern games because their video cards can't handle the graphics in games or have to work very hard causing the machines may be overheated and the HEAT is not good for any machine.

  Hope it makes sense.

• 0 MB of CACHE physical memory, bad Performance

  My computer has a very bad performance. It shows in taskbar (PERFORMANCE tab) I don't have enough physical memory, physical memory is about 90 MB, total is Mo 4043, also available is Mo 1684, Cached's Mo 1628, sometimes free memory is 0. Is it possible to reduce the size of the physical cache or increase the physical memory (without RAM upgrade)?

  Here is the screenshot of my Task Manager(performance Tab).

  Hello

  Did you make any changes before the show?

  Refer to the article below:

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-in/Windows7/optimize-Windows-7-for-better-performance

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-in/Windows7/change-the-size-of-virtual-memory

  For reference:

  Usable memory may be less than the memory installed on Windows 7 computers

  http://support.Microsoft.com/kb/978610

  Note: Changing the BIOS / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know if that helps.

• Very bad performance on a virtual machine

  Hi all

  I've got 2 x 5.1.0 ESXi hosts (733933) in my environment connected to a starwind iSCSI data store that has SSD in a RAID array. It's very fast because we never had performance issues.

  The data in question store contains several virtual machines. Virtual machines are as quick as you wait, except for one. It is very slow, and I can't nail why (IOMeter test below).

  I tried these techniques to understand:

  1. Run IOmeter several moments of the day to ensure that it is not a process on the VM problem asking the questions
  2. Length of queue disk supervised the VM problem to ensure that it is not too busy
  3. Provided all the parameters of virtual equipment of the VM (type of controller disk, CPU, RAM) problem
  4. Installed a new VM on this data store to eliminate the data store as a cause of the performance issue
  5. Checked the allocation of shares of the VM problem to make sure it is not pushed to the side under heavy load

  I don't see anything that can cause this problem, someone at - it ideas?

  The performance test:

  Just a thought that we had something like that a long time ago... I was sure it was the storage that it ended up being the memory and CPU on the virtual machine limit.  You would see really bad performance on the wise vm storage, but the real problem was the vm limit causing storage I/O queue time.   I would look in the settings of the virtual machine and look at reservation / limit.   Do not forget that even a reservation does not override the limit.

  If you do not have a limit attempt to set a reserve for all CPU / memory and then test again.   If it fails again there is something really wrong with the I/O stack on your Windows OS virtual machine.  (You should also try to vmotion it in another data store)

  If you know how to use ESXTOP you can quickly find information on your problem using the m, c and v keys.

  I would like to know what you find.

• I have bad performance in the games, can I change the video in my laptop?

  Hello.. I have asus X54H notebook pc (2 GB RAM-320GBHDD, mother-INTEL dual core Model-k54L card processor)... WINDOWS 7 ULTIMATE 32 BIT, I identify for intel hd grtly install windows 7 on it... I get a updated windows intel HD Graphics... but it is not good... It uses the cpu memory while playing games or any other work & games does not not smoothly.my question for you is I can update my Intel HD Graphics NVIDIA graphics card... because when I click on software update driver in Device Manager, it shows 2 chart standard vga compatible hardwares & intel HD Graphics When I uncheck, there is the list of manufactured products & I selects nvidia... It shows nvidia geforce6100(Microsoft Corporation WDDM) & MANY more versions of nvidia... When I select it. Start Windows, installation of software & when I restart my computer, it doesn't have to update... It showing yellow mark on it... so please tell me how can I update. I go to the website of nvidia also, but he could not scan my system... it says an error has occurred... Help, please... (Sorry for my bad English)... Thanks in advance.

  You have a portable computer, get you the drivers from the manufacturers mobile site and no windows update or Nvidia and if you had read the page nvidia drivers you needed to know this.

  You can't put to day/change graphics on a laptop, graphics performance are what you get and not editable

  http://support.ASUS.com/download.aspx?SLanguage=en&m=X54H&p=3&OS

  If you have a desktop computer, you can change the graphics card.

• When using gpu high performance my laptop screen goes black and white

  HP Touchsmart TM2-1010ea

  Windows 7 64 bit

  recently updated to AVG, nothing of other news.

  When I use the high-performance GPU the laptop screen going black and white, still functional. When you use two screens, the second screen is in color, while the laptop is in black and white. using the screen of the laptop power saving GPU is again in color.

  Hello mcbethtings:

  Welcome to Hp forum. Your question is not in the list. http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=56801&tmp_task=solveCategory&CC=UK&DLC=en&lang=en&LC=en&product=4100044 So, in this case I sujest a restore back to remove what are the mistakes caused by a bad AVG update. GoTo all programs search and type in Recovery Manager click that above and open it. Click Yes (white box) so it apears. Select Microsoft System Restore Click next to three windows now you will see a list of dates, select a date prior to the installation of the update, then click. Let the computer do its restoration. Once done see if your problem is solved, if so try the update again, make you that the update is for 64-bit Windows 7 computers before you download it again. If that happens again once you know what AVG is not compatible for your computer.

  Probably you have only received part of the witch update caused this problem due to the disruption of atmospheres. Sometimes this happens. Put day of my HP only made once. I just did a restore back and downloaded the update again and the second time through work. Please click on Bravo if this solves your problem. Thank you frrw.

• Slow performance with laptop computer Windows 8.

  Separated from this thread.

  Nothing don't you suggested worked. I have a new laptop with Windows 8. I am extremely disappointed by my experience of this new version of windows. Maybe if I had a necessary step for companies their tablet, maybe I'd be this. However, I want my old rear windows. It of a joke and does not print the user of the operating system. Nothing is intuitive and even your description on how to do was not easy to follow.

  Hello Jennifer,

  I understand your frustration level, but if you give us the opportunity to help you with this problem, I'll try my best to help you with this. I would be grateful if you could provide the following information:

  1. What exactly is the problem that you are facing? D o you have problems to access the applications installed on the hard drive or access the Internet?
  2. What is the brand and model of the computer?

  You can try the following methods and check if they help:

  Method 1:

  Is one of the best ways that you can improve the performance of your PC by optimizing the hard disk. Windows includes features to help optimize the different types of readers who use PCs today. Any player from your PC uses, Windows automatically selects the optimization that is suitable for your car.

  Improve performance by optimizing your hard drive:

  http://Windows.Microsoft.com/en-in/Windows-8/improve-performance-optimizing-hard-drive

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

  Method 2:

  A quick way to check if your PC has a virus is to use Windows Defender. This malware protection is provided with Windows and helps identify and remove viruses, spyware and other malicious software.

  How can I find and remove a virus? :

  http://Windows.Microsoft.com/en-us/Windows-8/how-find-remove-virus

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Additional information.

  Performance & maintenance:

  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V1H=win8tab2&V2H=win7tab1&V3H=winvistatab1

  Hope the suggestions help above. Please return with the required information.

• Satellite Pro A300 PSAJ5E: OpenGL bad performance by using CAD-CALCULATION software

  Hello

  I have a new Pro A300 PSAJ5E type with ATI HD3650 graphics card.
  I spent successfully to Win XP using recory DVD with no poblems.

  I use different types of professional software of CAD-CALCULATION that uses OpenGL.
  The performance of one of them are highly degraded by comparing to my previous laptop which had an old ATI graphics card non-professional.

  The software uses hardware acceleration for the overlay planes.
  I tried to update the graphics drivers, but nothing has changed.

  Could you suggest me something?

  Thanks in advance,

  Gabriele care

  Hello Gabriele

  Unfortunately I can't offer any solution for you, but according to http://ati.amd.com/products/mobilityradeonhd3600/specs.html page OpenGL 2.0 is one of the characteristics listed.

  Only thing I can suggest is to contact the software manufacturer and talk with their support. Toshiba laptop to the manufacturer offer hardware and OS pre-installed but can also provide support for thousands of different applications available on the market. Usually software development must test own product on different hardware platforms and find the solution to make own attractive product for customers.

  What do you think?

• Bad Bios and laptop does not start

  One day, I tried to run an update of the bios and I now know that I made the biggest mistake by forcing my laptop off while running. It's a sudden reaction when my laptop had seemed frozen. I was reading on the update file/app/what is to have all closed while it performs this update but if tempting as I couldn't move my cursor and I had not yet started the update, just opened. After forcing to close, I cut on and get nothing more than a black screen, no light in the display. Y at - it any way to solve this problem at all? I went to someone about this issue, they said that I might need a new motherboard I want to buy because I just think that I mind as well buy a new laptop instead.

  Acer Aspire One ZA3 netbook
  Windows Vista

  That's all I know of memory and what is on the laptop

  Hello

  The BIOS is for the motherboard.

  And we cannot help you with BIOS problems.

  You will need to contact the manufacturer of your computer; Acer.

  If you put the wrong BIOS you can ruin your motherboard.

  See you soon.

• Dell - bad logonui.exe laptop image

  Hello, I have a Dell laptop and when I start it in the turn, before he arrived at the login screen, a mistake similar pop message and says the following...

  "LogonUI.exe - Bad Image".

  C:\Windows\systems32\avrt.dll is not designed to run on Windows or it contains an error. Try to install the program with the help of the original installiation media or contact your system administrator or the provider of software for support"

  And after I click 'ok' to the message, it allows me to go to the login screen and my password and then press ENTER, then it just sits there and loads and loads and loads and it never opens the screen or anything like that.

  What I do or what might have caused this to happen?

  THANKS FOR ANY HELP! I really appreciate it.

  http://en.community.Dell.com/support-forums/software-OS/f/3524/p/18806333/18933039.aspx

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/18514433/18836199.aspx

  Read the information above from the Dell Community any similar problem.

  See you soon.

  Mick Murphy - Microsoft partner

• No base - curve - bad performance ION S12 wireless - Lenovo support no help

  Hi forum,

  I received my Thanksgiving S12 ION contract last week.  The size and the format are perfect, overall performance, just as it should be, but wireless performance is unacceptable.  I work for IBM and have a T60P work laptop and two mobile Y430, all of which have the perfect full bars of signal wireless throughout my house.  But this S12 ION has only three bars in my office next to the wireless G router and only one or two bars in the next room.  For any other room in the House I can not connect.

  I checked that I have installed the latest wireless drivers.  It comes with those who is the latest on the Lenovo support site.

  I called technical support from Lenovo.  After waiting on hold, I've been connected, then dropped after another 30 minutes on hold.  The second time I have called, I was told that I had to turn on the wireless switch.  I told the tech that I was already logged and that the question was wrong signal.  He suggested to remove Lenovo readycomm, but which is not installed on this S12.  Finally, he told me that it's just a netbook, not a laptop and if I don't like what I should return it.

  I'm so angry at this poor support that I return it immediately, if it wasn't for the expenses of return of 15%.

  Does anyone else have problems with wireless?  I'm wrong about what is a nice wireless connectivity tool?

  At the price I paid, $399, I can this dump on eBay, but I am seriously disappointed.

  Hi Forum,

  I opened the wireless card slot after reading other forums of netbook that some had to loose antenna connectors. At first I thought that's what I had as one of the drivers, a black, was not seated. It turns out that the connector on the wireless card has been open curve.

  See photos:

  http://i241.Photobucket.com/albums/ff283/skier757/Lenovo%20S12%20wireless%20card/PICT0004.jpg

  http://i241.Photobucket.com/albums/ff283/skier757/Lenovo%20S12%20wireless%20card/PICT0002.jpg

  [IMG] http://i241.Photobucket.com/albums/ff283/skier757/Lenovo%20S12%20wireless%20card/PICT0004.jpg [LINE]

  [IMG] http://i241.Photobucket.com/albums/ff283/skier757/Lenovo%20S12%20wireless%20card/PICT0002.jpg [LINE]

  I folded the connector closed ring, reconnect the antenna cable, and now I have a signal. Thought you would be interested in the photos.

  I'm going to call Lenovo and ask them to replace the wireless card, because there is no guarantee the connector is not damaged, but it works fine for now.

• VMware Player, really bad performance.

  Hello

  I'm a really bad, unusable performance with any client VMware. I've tried combinations of:

  VMware Player and VMware 10.

  XP, Win 7, Linux Mint operating systems, among others.

  All comments VM to run incredibly slow. Some of the questions include:

  Movement of the mouse very slow/lag

  Takes less than 60 seconds for firefox, or any program to open.

  When a program is open, the shift makes it just unusable.

  I tried to install the computer virtual invited to different readers, including an SSD.

  I tried the resolutions of 800 x 600 up to full screen.

  I downloaded and installed the latest VMware tools.

  I searched and tried all the possible solutions I found on google for the last 2 weeks.

  I checked the Bios to ensure that virtualization is on.

  I tried to vary the amount of Ram and CPU available on the guest virtual machine.

  Course record:

  I7 2600 k

  mem 32g

  SSD and a couple of WD black 1 TB drives

  XFX 7950 DD Black Edition

  I am at a loss. If anyone has any ideas what else I could check it would be greatly appreciated.

  Hello Weinstein and thank you for the answer.

  The host operating system uses Win 7 Ultimate 64 bit, and for the programs that are running, it may be a fresh restart with only the usual windows services.

  With respect to the way in which the guest virtual computer is configured, I tried varying amounts of ram and cpu. But as it is currently is:

  Memory 2 GB

  2 processors 'virtualization = automatic engine.

  (SCSI) hard drive 60 GB

  NIC NAT

  Any other information needed please let me know, I'd really like to get this working. I got it on my old machine, a processor AMD/MB. When I built this Intel machine he developed suddenly problems...

  Hmm, motherboard info if no help:

  ASRock Z77 Extreme 4

  Edit... After addition of the motherboard in my google search, it may possibly be a Bios problem with this motherboard. From the looks of him, I may have to go back to an older version of bios. Investigation is ongoing.

  Edit #2... After rolling back to the version of the Bios 2.5 it seems that my problems have disappeared.

  For all those who use the ASRock Extreme 4 with a processor 2600 k flash bios to version 2.5

  There are known problems using a processor 'K' with this motherboard and VT and bios versions more recent than 2.5 seem to have done even worse...

• Criticism of the article KB 1013857 (machines virtual Converted experience bad performance)

  I don't rant often, but in this case, I make an exception.

  An article published recently (http://kb.vmware.com/kb/1013857) is intended to provide guidance on how to improve bad runtime performance P2V would be machines.  My opinion is that this article is a big step backward compared to the increase (fast) to quality content in the Ko in recent years.

  I think that this article extends more FUD done - I can just see these recommendations taken by some of my customers, with confusion and maybe chaos as a result of their nominal value.  Especially because the title and the preamble before seems to indicate he brings difinitive.

  I can raise objections to factual and subjective reasons:

  • Fact: the article is poorly written and has apparently not been checked properly.  It looks like a copy - paste of a conversation between an engineer and a customer support.

  • Fact: the recommendations provided in the article are not necessarily relevant to the issue

  • Notice: the recommendations provided are vague and questionable at best

  • Notice: this type of article does more harm than good, because it encourages the "best practices" that are not necessarily recognized as such in the official documentation of the product and potentially based on engineering of intuitions rather than fact.

  • Opinion: I think it's clear now, but I don't share a lot of the advice given in the article.

  If you have advice on this article - positive or negative - please open the article and post your comments in the comments at the bottom.  I think it's the only way we can continue to improve the value of the KB.

  Thank you for this return and I'm sorry, this isn't our usual quality.

  I will have this article reviewed immediately.

  If you have information that could be added to the article I could pass on that too.

  Rick Blythe

  Social media specialist

  VMware Inc.

  http://Twitter.com/vmwarecares

  http://Twitter.com/vmwarekb

• Bad Performance of host with workstation 6.5 OS

  We evaluate the virtual machine software and that you have installed VMware Workstation on our computer to test against Parallels and Virtual PC.  We already have Virtual PC on a computer that is different, but the same with good results with the exception of access to video drivers and other issues.

  We installed Vmware, installed XP32 as the guest operating system and a severe slowdown on the host operating system.  It is at the point of use.  However, we do not see that all resources are used, there is time to RAM and processor available and disk access seems fine.  Someone give me a clue as why performance is so bad.  Computer form below

  Dell Latitude D820

  2.0 Intel CD

  4 GB of RAM

  HARD 250 GB sata 7200 RPM drive

  Broadcom NetExtreme 57xx Gigabit controller

  I put the OS to use 2 processors, 2 GB of RAM and HDD to 25 invited GB and bridged networking.

  When I start the VM it disconnects me from the network on the host.  Should I switch to NAT?

  Thank you

  with the appropriate settings and a guest with 1 600 MB of vRAM less this 1600 MB can be located entirely in real RAM memory

  a virtual machine with nominal 2400 MB of vRAM may however use real RAM 300 Mo while the rest 2100 MB are toggled to a memory file.

  Guess what is faster...

  This limitation has nothing to do with these limitations, you mentioned. It is a remnant of older versions of workstation where the max RAM amount for a guest was 1600 MB.

  Earlier versions always fully allocated real vRAM in RAM

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Bad Performance InDesignCS3 OS10.5.6

  Tour G - 5 Mac OS 10.5.6 In Design CS3

  I've known a continued degradation of performance with InDesignCS3. Since I started using it in CS1 he delayed launch. Now, it takes about 1.5 minutes at the start and it takes about 2 minutes to stop. It takes about a minute to print the first print job after opening InDesign. After this printing fine.

  
  As of today, I noticed that brought PhotoshopCS3 photos for printing (150 dpi) newspaper are wrong pixelated(sp?). The original photos were 300 DPI and many more large physical dimensions. I went to the display-> display performance-> high quality with no result display. I restarted the CPU and it worked fine for about 10 minutes then the problem comes back. I even "uninstalled" and reinstalled InDesign without success. The quality of the resolution's going again between bad and good. When the photos appear good, they print well and vice versa. I also changed in overlay mode to remove the lines around text boxes, etc. The catalogue, dialog, I made sure that in the data graphics-> Send > all is selected.

  Someone at - it answers?

  Yankee Rebel wrote:

  How many fonts that you would recommend be active?

  Only the ones you use.