Bad SSL certificate on the server to dial

Similar Questions

• How to install the ssl certificate in windows server 2008?

  Hello

  Can someone give me the steps to install the SSL certificate on my application hosted on windows server 2008 R2?

  Hello

  Although technet.microsoft.com should be the best forum for the problems of server below is a guide on how to install an SSL certificate.

  It will be useful.

  To install your newly acquired in IIS 7 SSL certificate, first copy the file somewhere on the server and then follow these instructions:

  1. Click on the start menu, go to administrativetools and click on Manager of Services Internet (IIS).
  2. Click the server name in the links on the left column. Double-click server certificates.

     

  3. In the Actions column to the right, click Complète Certificate Request...

     

  4. Click on the button with the three points, and then select the server certificate that you received from the certificate authority. If the certificate does not have a .cer file extension, select this option to display all types. Enter a friendly name that you can keep track of certificate on this server. Click OK.

     

  5. If successful, you will see your newly installed in the list certificate. If you receive an error indicating that the request or the private key is not found, make sure that you use the correct certificate and you install it on the same server that you generated the CSR on. If you are sure these two things, you just create a new certificate and reissue or replace the certificate. If you have problems with this, contact your certification authority.

     

  Bind the certificate to a Web site

  1. In the column of links on the left, expand the sites folder, and click the Web site that you want to bind the certificate to click links... in the right column.

     

  2. Click the Add... button.

     

  3. Change the Type to https , and then select the SSL certificate that you just installed. Click OK.

     

  4. You will now see the listed link for port 443. Click close.

     

  Install all the intermediate certificates

  Most of the SSL providers issue certificates of server out of an intermediate certificate so you will need to install the intermediate certificate on the server as well or your visitors will receive a certificate error not approved. You can install each intermediate certificate (sometimes there are more than one) by following these instructions:

  1. Download the intermediate certificate in a folder on the server.
  2. Double-click the certificate to open the certificate information.
  3. At the bottom of the general tab, click the install Certificate button to start the Certificate Import Wizard. Click Next.

     

  4. Select place all certificates in the following store , and then click Browse.

     

  5. Select the Show physical stores checkbox, then expand the Intermediate certificate authorities folder, select the below folder on the Local computer . Click OK. Click Next, and then click Finish to complete the installation of the intermediate certificate.

     

  You may need to restart IIS so that it starts the new certificate to give. You can verify that the certificate is installed correctly by visiting the site in your web browser using https rather than http.

  Links

  • Move or copy an SSL certificate on a Windows Server to another Windows Server
  • How to disable SSL 2.0 in IIS 7
  • How to configure the SSL in IIS 7.0
  • Video tutorials to install an SSL certificate in IIS 7 to NetoMeter

  Kind regards

  Joel

• Setting the SSL certificate for the web user interface

  How can I configure the SSL certificate for the management of a SG300 interface? I don't seem to find the configuration option in the web gui?

  Hello Dirk,.

  For import / create / modify h99350 ssl please go to ' ' security > SSL server > SSL server authentication settings.

  HTTPS is enabled by default.

  Thank you and best regards,

  Siva

• SSL certificates on the desktop HTML access

  I am configuring access HTML and try to correctly configure SSL certificates on the VDI desktops in a linked Clone pool.  Documentation, VMware wants us to install a unique certificate for each desktop computer that will be a pain and from what I see, is impossible.  Does anyone have an easy solution for this?  The main problem that I notice, is that the IP Office address is what actually shows in the URL.  How an appropriate certificate can be created with a DHCP address he will change all the time?  Any guidance will be appreciated.

  Connect via a connection or a security server the value "use secure gateway" for HTML.  Only cert is the entry door.

• Pre complains about SSL certificate on the exchange server

  Hello.  I just got a pre and tries to set up to communicate with an exchnage server.  Pre complains and will not set up the connection with this error message: «"SSL certificate error.» Is the date and time correct? ».  The date and time are correct, but the server is running a self signed certificate.  This causes no problems with iPhones that use a lot of people here.

  How can I fix it?  It is not all parameters for this problem.

  I spent the weekend trying to test and understand what was going on.  I found that if I nominated the e-mail server (name after HTTPS: / / in Setup) the same as the name of certificate displayed in the Certificate Manager (Launcher > Device Info > more info > Menu > Certificate Manager), the error should disappear.  The problem for me was that the name of cert in cert Manager was different from address of mail server (in my case server. [domain .local] instead of mail. ([Domain_name] .com).  The transformation it seems to use is:

  (1) find the certificate...

  (2) CN is HTTPS: / / in the installer?

  (3) If no, use error 'Verify the certificate, date and time not correct' (or whatever it is) - If Yes, go to HTTPS: / /.

  (4) Exchange requires safety pin?  If no, proceed to synchronize - if so, use error "unsupported of security policies.

  So I looked more closely CERT and it held several common names (CN) for the cert.  It seems that ANY OTHER DEVICE can filter through the list of common names, and use the one that works.  The Pre uses only (whether first or last, I don't know).

  So, there are two options for the certificate problem (I guess the 3rd is that you can return the phone):

  FIRST SOLUTION

  =====================

  (1) check the name of cert in cert Manager.

  (2) if it is a name that can be resolved DNS (i.e.  [mail]. [mywebsite]. [com]) then change this setting in your exchange installation program in the mail server field beside the HTTPS: / /.

  This will only fix it if your COMPUTER administrator has with permissions on the used field.  It is possible that an alias is used on other areas

  SECOND SOLUTION (as I have done)

  =================================

  (1) ensure that your Certification Authority is installed.  You can do it by clicking START > ADMINISTRATIVE TOOLS > CERTIFICATION AUTHORITY - OR - on a computer on your network using IE/Safari/Firefox and typing http://server/certsrv.  If the page is found, then you are installed, if not, then you will need to have installed.

  NOTE: SBS 2003 WILL AWARD A CERT TO THE IIS WITHOUT THE ROOT CA.  THIS SEEMS TO BE THE PROBLEM WITH THE AUTO CERTS GENERATED I HAD

  (2) If you have not installed it, go to this topic, it is well written to get step by step instructions how to install, create demand for cert, create the cert and install the cert (it took me about 30 min).   http://www.MSExchange.org/tutorials/SSL_Enabling_OWA_2003.html

  NOTE: IF YOU ALREADY HAVE A CERT ON IIS, YOU NEED TO REMOVE IT AS IT IS "DEFECTIVE" CERT BEFORE YOU CAN REQUEST A NEW CERTIFICATE.  YOU MAY BE ABLE TO REINSTALL OVER THE NEW CERT, BUT I DON'T KNOW

  (3) open https://mail.domain.com/exchange on your computer - display details of the cert and save the file on your desktop - if you are using a laptop, you can also install it on your laptop to use for use outside the Office (this is also a good back-up that you can use to get more later if needed again).

  (4) plug your pre in USB mode.

  (5) slide the cert and unplug the USB cable

  (6) go to cert Manager

  7) tap on the icon of "Sun" at the bottom left

  (8) press on the new file cert that you save in USB mode

  (9) to confirm that the new cert appears with the name of the correct mail server

  10) go to the e-mail program and configure the exchange account

  The above will create a REAL root cert (not IIS domain root Cert) that the Pre can work with.

  Really, I don't know that how/why Palm overlooked this possibility because they claimed so-called does not want to sell to companies who need strict security requirements.  For me, it means a small / medium company that has limited IT supports (according to the needs, pay as you or green guy with limited knowledge).  Then, why they test the GER in this environment, I'm not sure.  I bet they were tested on their own network, which has all the correct methods, best practices for the management of cert.  I guess it's like the developers that they have offended and almost lost their support until turned it over and said: 'sorry, we really want make you programs for our platform WebOS. ".  We've just been paranoid for so long salivate us when the bell rings. "They just didn't beta test this well enough.  The sad result of this is that Sprint will have to address all of the sheets because this certificate simple reading process was given only minimal recognition capabilities.

  But having said that - I'm now completely in love with my pre!

  I'm happy to try to help if you need it.  I found a lot of the forum of solutions were not enough detailed, so do not hesitate to contact.

• Help generate the SSL certificate for the Security Server

  Hi people,

  We have server (ss - 01.mydomain.local) security and connection server (cs - 01.mydomain.local). Now intend to install a certificate on the Security server. What should be the common name.

  our Web site is something like access.mydomain.local.

  Also, we plan to install SSL only on security for internet access server, this will affect the internal users, access to the connection to the server.

  Thanks and greetings

  J P Raj

  Take a look at the link below

  https://pubs.VMware.com/horizon-view-60/topic/com.VMware.ICbase/PDF/horizon-view-60-scenarios-SSL-certificates.PDF

  Internal users will not be affected when you install the Security server certificates

  Simply create a CSr file > get certificates and import them to the Security server in the MMC guide explains practically everything. If you already have certificates wildcard certificates, then you can follow the sub process

  (a) export the server certificates

  (1) to connect to the server that has certificates

  (2) for this server to export it to a PFX format certificate.

  (3) open the Microsoft MMC Certificates snap-in for the computer account.

  4) navigate to certificates (Local computer) > personal > certificates.

  (5) right-click on the signed certificate that is to be exported.

  6) click all tasks > export.

  (7) on the Welcome screen, click Next.

  8) click Yes, export the private key.

  (9) if it is an option, click on include all certificates in the certification path.

  (10) enter a password for the private key. This is required for the import certificates.

  (11) to enter a file name and location. For example, C:\certificates\certificate.pfx.

  12) click Next.

  13) click Finish.

  b) import it to the use of broker or planned connection securityr.

  Certificates of thye 1) import (preferable Pfx format) for the server broker or planned connection security.

  (2) open the Microsoft MMC Certificates snap-in for the computer account.

  3) navigate to certificates (Local computer) > personal > certificates.

  (4) right-click the certificates.

  5) click on Import.

  (6) through the pfx and click Next.

  (7) enter the certificate password.

  (8) select Mark keys as being exportable.

  9) click Next.

  10) click Finish.

  (c) restart Consulting Services

  To restart the services:

  Log in as an administrator on the server that is running the Server VMware View connection server VMware View connection or VMware View Server Security.

  Click Start > run, type services.msc and press ENTER.

  In the list of services, right-click on the VMware View connection Server or VMware View Server Security service.

  Click on restart and wait for service to stop and start.

• Replacement of the SSL certificate in vCenter Server Heartbeat with a new certificate

  Realized the SSL certificates on my vsphere vCenter Server 5.5 environment change, but now I'm looking to deploy vmware vCenter Server HeartBeat service, but I have the following doubts.

  1. it is necessary to perform the exchange of currently used SSL certificate in my environment. ()http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2013041( )

  KB article talking about amendment of the certificate of a vCenter Server Heartbeat deployed... If the vCSHB are not deployed and yet, you don't need to worry... just go ahead with the installation and the new vCenter server certificate will be recognized by vCSHB.

• SSL certificate for the Security Server external facing

  Dear all,

  Today, I bought an external SSL certificate of DigitCert for our security server. I imported the certificates in the personal certificate (computer account) on the Security Server store. DigiCert provided three certificates, root CA, CA server and the other with the name of our domain. I renamed the vdm to the friendly name of the existing self-signed certificate and used the friendly name for the certificate vdm has our domain name. Subsequently, I rebooted consulting on the Security server. They are all released on except the "Display Blast Secure Gateway" service which entered the suspended state.

  On our facility, we have a connection to the server and a security server. To the Security Server, we use a different domain name for connecting to the server. We have an internal PKI and the connection to the server uses an SSL certificate.

  connection to the server = server01.internaldomain.com

  Security Server = server02.externaldomain.com

  Why the certificate cannot be loaded to view Blast Secure Gateway? I missed something?

  Thank you

  Edy

  I solved it. It was with the private key of the certificate. This is the reason that the Blast Secure Gateway could not load.

• Local error-1200 creation push certificates on the server. Any idea?

  In the Application Server

  When you try to renew or create a certificate to push comes up with the error "Certificates to push creation local error - 1200" on the server. Any idea? »

  I'm having the same problem with 10.7.5 server. (two of them)

  At the time of renewal, I was looking at the Console and I think the Apple Server SSL certificate is therefore more reliable.

  (or server versions are low)

  August 15 at 10:23:08 login.* * servermgrd [23349]: received the connection error: error domain = NSURLErrorDomain Code =-1200 "error SSL and a connection to the server cannot be made. UserInfo = 0x7fb8f5aab9a0 {NSUnderlyingError = 0x7fb8f15af450 "error SSL and a connection to the server cannot be made.", NSErrorFailingURLStringKey =https://identity.apple.com/pushcert/caservice/renew, NSErrorFailingURLKey =https://identity.apple.com/pushcert/caservice/renew, NSLocalizedRecoverySuggestion = you want to connect to the server anyway?, NSLocalizedDescription = SSL an error has occurred and a connection to the server cannot be made.}

  August 15 at 10:23:08 login.* * servermgrd [23349]: certificate request to push failed: reason = Local, error code = - 1200, error = error Domain = NSURLErrorDomain Code =-1200 "error SSL and a connection to the server cannot be made. UserInfo = 0x7fb8f5aab9a0 {NSUnderlyingError = 0x7fb8f15af450 "error SSL and a connection to the server cannot be made.", NSErrorFailingURLStringKey =https://identity.apple.com/pushcert/caservice/renew, NSErrorFailingURLKey =https://identity.apple.com/pushcert/caservice/renew, NSLocalizedRecoverySuggestion = you want to connect to the server anyway?, NSLocalizedDescription = SSL an error has occurred and a connection to the server cannot be made.}

  So not yet an idea, but hopefully with these console outputs happen to something?

• What everyone uses for an SSL certificate on the wireless controller?

  If I use the SSL certificate generated locally on my WLC Internet Explorer always shows the "untrusted cert alert" when users try to authenticate through the web interface. What can I do to fix this do I need to buy a cert? If so where is the best and the best place to do this? GoDaddy? Also, I bought one for my mail server and had set a domain during the process name. What should I use for my WLC? The URL during the authentication process web show https://1.1.1.1

  RapidSSL is your best bet. It is less than $90 for 1 year with renewal and insurance. 5 years is like $ 380. GoDaddy will not work because they use chained certificates.

  On the VIP, you enter the DNS domain name as what you used on the certificate CN when generating a csr. Of course, you have to solve the CN name to 1.1.1.1 or change the 1.1.1.1 to another ip address that is not on your network. Restart the wlc and your done.

• ODSEE 11 g and SSL certificate on the cascade replication topology

  Hi all

  I try to activate SSL on the replication topology cascade Department 11g with 4 cases including 1 hub.

  Can I use a multi server SSL certificate to spread on all servers?

  Any tips?

  Thanks in advance.

  
  

  Eugene

  Hello Eugene,

  Yes, it should work.

  Either ask a multiple server of your CA certificate and import it on Department via PKCS12

  or generate a CSR with a subjectAltName with certutil.

  If I remember correctly, add another name of subject certificate is possible on the side this even if it is not present in the request of cert,.

  -Sylvain

  ------

  Please check the response as useful or correct when it is appropriate to make it easier for others to find

• Change the SSL connection on the Server VMware - what customers?

  Hello

  I currently have Mirage Horizon 4.2.3 installed and I use NO SSL. Server is available only for users within the local network.

  I would change it and this server on the internet for the users will be able to backup data during a move and I'll be able to get diapers for them.

  All guests of Mirage are pointing to the internal address of Mirage.

  My questions are:

  -If I change server settings will be I lost the connection to the LAN clients or I'll go 'extra' access via https?

  -is it possible to make clients to use SSL connection without re-installing the agent of Mirage?

  -I can do it without full re-synchronization of data?

  [Thanks for the replies and suggestions:]

  Once you have changed the configuration of SSL for a server of Mirage, customers also has need to use SSL for connects to the server, otherwise the connection will not be established.

  You can change the settings of the Mirage customer without reinstallation:

  -In Windows, the tray icon, open the status of Mirage, CTRL + ALT + S, a new window to set up the client must open and then check the Option 'use SSL Transport'

  OR

  -Edit the Wanova.Desktop.service.exe.config file and change the 'useSslTransport' for real 'touch' and then restart the service Wanova Mirage

  Full re-synchronization of data should not be necessary, as endpoint and always the same agent

• SSL connection to the server on the Internet on the BIS to Airtel plan

  Dear experts,

  I am a newbie in the development of BlackBerry and have developed an application that requires users to register via the BlackBerry https connection.

  I test the app on BlackBerry 9000 "BOLD" with an upgrade of the OS to version 5.0 provided by Airtel carrier.

  I searched the many posts here and tried to use the ConnectionFactory to check that I have selected the right access point for the network. Recording works fine on WiFi.

  However, im using a BIS plan and when I try to record OTA it fails

  Based pointers to the code below and the application event log would be really useful.

  int[] preferredTransportTypes = {TransportInfo.TRANSPORT_TCP_WIFI,
                  TransportInfo.TRANSPORT_MDS,
                  TransportInfo.TRANSPORT_WAP2,
                  TransportInfo.TRANSPORT_TCP_CELLULAR,
                  TransportInfo.TRANSPORT_BIS_B
                  };
  
          ConnectionDescriptor conDescriptor = factory.getConnection(req.getUrl());
          HttpsConnection request=null;
  
          if ( conDescriptor != null ) {
  
              // connection suceeded
              int transportUsed = conDescriptor.getTransportDescriptor().getTransportType();
  
              Logger.log("Using transport type:" + transportUsed);
  
              // using the connection
              request = (HttpsConnection) conDescriptor.getConnection();
          }
          else
          {
              ServerResponse response = new ServerResponse();
              response.setErrorMessage("No connectivity to Server!");
              response.setStatusCode(-1);
              return response;
          }
  
          addHeaderParams(request, req);
  
          switch (req.getReqType()) {
          case RequestType.GET: {
              request.setRequestMethod(HttpConnection.GET);
  
              break;
          }
          case RequestType.POST:
          case RequestType.PUT: {
              request.setRequestMethod(HttpConnection.POST);
              addBodyParams(request, req);
              break;
          }
  
          }
          return executeRequest(request);
  
  }
  
  private static ServerResponse executeRequest(HttpsConnection request)
              throws Exception {
  
          ServerResponse resp = new ServerResponse();
  
          resp.setStatusCode(request.getResponseCode());
  
          if (request.getResponseCode() != HttpConnection.HTTP_OK) {
              resp.setErrorMessage(request.getResponseMessage());
          } else {
              InputStream is=null;
              try
              {
                  is = request.openInputStream();
  
                  int len = (int) request.getLength();
                  if (len > 0) {
                      int actual = 0;
                      int read = 0;
                      byte[] data = new byte[len];
                      while ((read != len) && (actual != -1)) {
                          actual = is.read(data, read, len - read);
                          read += actual;
                      }
  
                      resp.setBody(new String(data).toString());
                  }
                  else if (len == -1)
                  {
                      StringBuffer out = new StringBuffer();
                      byte[] b = new byte[4096];
                      for (int n; (n = is.read(b)) != -1;) {
                          out.append(new String(b, 0, n));
                      }
  
                      resp.setBody(out.toString());
  
                  }
              }catch(Exception e)
              {
                  Logger.log(e);
              }
              finally
              {
                  if (is!=null)
                      is.close();
              }
  
          }
  
          return resp;
  
      }
  

  Here is the log of the events of the connection failed

  I have net.rim.networkapi - net.rim.device.cldc.io.ssl of the FATF.

  It is indeed a good question.  I suspect the answer may depend on your provider, in this case Airtel.  Their package allows port 443 over WAP?

  The only way I know, tests, that it is to create a small program of socket based and do try port 60, who must work, and then port 443.  But it is probably easier to contact Airtel and ask.

• Certificate for the server connection warning

  Hi all

  is there a way to disable the red icon on the servers of connection establishes a link for the self-signed certificate, invariably with a certification authority?

  Thank you all!

  Matrix

  It is best to install a trusted CA signed certificate. This will not eliminate only the caveat, but will also allow your users the assurance that they connect to an authentic environment and minimizes the risk of a man-in-the-middle attack.

  Mark

• Update the SSL certificate on a security server?

  Good afternoon everyone,

  I'm trying to update the SSL certificate on the server of our security, but I'm running into some problems.

  DigiCert (we get our certs of), not like the VMWare KB article order to request a 2048-bit crt, so we used their tool to generate our a commandsfor us:

  keytool - genkey-server alias - keyalg RSA - keysize 2048, FULL domain name -.jks keystore - dname 'CN = CNNAME, OR = OUNAME, O = ONAME, L = NAME, ST = STNAME, C = CNAME'

  keytool-certreq alias server-file FQDN.csr - FULL.jks domain name

  (I did not show the exact details of the CN name, etc.)

  It makes the keystore a .jks instead of a .p12

  Should this cause problems?

  
  Because after I imported the cert in the keystore, change the config locked file to reference the key file and restart the Server Security Service, it does not restart properly. (Defining the locked towards the old works fine keystore file, then restarting the service works find though.)

  This documented error in Event Viewer:

  Not able to create the com.vmware.vdi.ice.server.JMXServer.main(SourceFile:211) MBean server
  javax.management.MBeanException: Exception thrown in the startServer operation
  at com.sun.jmx.mbeanserver.StandardMetaDataImpl.invoke(StandardMetaDataImpl.java:435)
  at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
  at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
  at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
  at com.vmware.vdi.ice.server.JMXServer.main(SourceFile:209)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at net.propero.workspace.windowsinfrastructure.tunnelservice.TunnelService.run(SourceFile:34)
  at java.lang.Thread.run(Thread.java:595)
  Caused by: java.lang.Exception: ice beginning: null
  at com.vmware.vdi.ice.server.Ice.startServer(SourceFile:695)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at com.sun.jmx.mbeanserver.StandardMetaDataImpl.invoke(StandardMetaDataImpl.java:414)

  Should I request/pay for a new cert so my base keystore is .p12 instead of .jks?

  Hello

  I think that the command you mentioned creating a CSR only. You get a digicert certificate after sending this rea and create a keystore with whom?

  Please follow the steps in this KB to complete the whole process.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1008705

  -noble