Bad username / password on Ready Nas Duo v2

Similar Questions

• Don't restart Ready NAS Duo

  We walked into work this morning and our ready Nas Duo was not working and does not detect on RAIDar. We hit the Reset button and turned on, the blue light flashes, lights flashed on and outside and the fan makes a noise, but it doesn't do anything else. We tried unplug and wait a minute before you do it again, still nothing. It detects no more in RADARS, but it was working very well and detect radar last week. When we put our serial number in, it came with ReadyNA SRN2000 in the model, but it won't let me put that in the above model number section.

  Yes, you will need to disable the power is not blocked during the boot process.

• Cannot install the collector emptying using VC integration option - username / password error

  Hi all

  «"" I'm trying to install collector Dump on the VC server or if I try to install on another server, when I choose the option for built-in VC it returns an error "" "" connection failed due to bad username and password»»»

  Snapshot attached

  I tried to change my password to less complex with special characters, but no go. I know that networking is fine because I am able to connect to my server from virtual center using Windows UNC path i.e. \\virtualcenterserver\c$

  This will come. Any Suggestions on why it returns this error. I use 5.5

  

  Thank you

  Vaibhav

  Hello

  When I installed it in the past, I used the:

  [email protected]

  SINGLE sign-on master account for this installation (because I knew that it was higher privilege and I was in a lab).

  Maybe give this user account a try? (admin@system-domain - if you are in 5.1).

• CCA813 - Erro. Invalid Username / password.

  Hi, I installed CCA813 and when I tried to connect using netadmin and password 1234 in TAW, some errors have occurred: error. Invalid Username / password.
  
  Could you help me please?
  
  Journal CallCenterAnywhere.log:
  
  2009 09 14:05:21, 659 [172.23.2.18] DEBUG review: 21.handleMessage(BusClient_IM.java:142) - * [KEEP_ALIVE 172.23.2.18] *.
  out 09 2009 14:05:22, 299 [http - 8080-$4 13389826] revision DEBUG: 38.doPost(ProxyLoginHandler.java:118) - action received [1002]
  out 09 2009 14:05:22, 299 [http - 8080-$4 13389826] DEBUG review: 14.executeQueryPrepared(DatabaseService.java:324) - ExecuteQuery on [TAW_PRIVATE_DATASOURCE] with [SELECT companyid, name, alias, zone, dateformatid, remotecontacts, remoteclienthistory, remotequalitycontrol, externalapp, RunApp, textlabel, htmlfile, enablecustomtab, countryid, enableexternalapp, enablepredictive, enablepreview, donotrecordstatus, applicationtype, runhtmlapp, enabledialout, securitypolicyid, displayname, templateid companies WHERE (alias =?) AND (isdeleted = 0)]
  out 09 2009 14:05:22, 487 [http - 8080-$4 13389826] DEBUG review: 14.getDBConnection(DatabaseService.java:492) - had connection with success
  out 09 2009 14:05:22, 534 [http - 8080-$4 13389826] DEBUG review: 14.executeQuery(DatabaseService.java:281) - ExecuteQuery on [TAW_PRIVATE_DATASOURCE] with [Select templateid of companies where the companyid information = 1]
  out 09 2009 14:05:22, 534 [http - 8080-$4 13389826] DEBUG review: 14.getDBConnection(DatabaseService.java:492) - had connection with success
  out 09 2009 14:05:22, 534 [http - 8080-$4 13389826] DEBUG review: 14.executeQuery(DatabaseService.java:281) - ExecuteQuery on [TAW_PRIVATE_DATASOURCE] with [SELECT Id_option, companytemplateinstances FROM optionvalue where templateid = 101 AND isdeleted = 0]
  out 09 2009 14:05:22, 596 [http - 8080-$4 13389826] DEBUG review: 14.getDBConnection(DatabaseService.java:492) - had connection with success
  out 09 2009 14:05:22, 596 [http - 8080-$4 13389826] INFO review: 38.authenticate(ProxyLoginHandler.java:191) - Login type Alias [1002] [System] [netadmin] username password [*] language Id [1]
  out 09 2009 14:05:22, 596 [http - 8080-$4 13389826] DEBUG review: 14.executeQuery(DatabaseService.java:281) - ExecuteQuery on [TAW_PRIVATE_DATASOURCE] with [select languagelibraryid as ID from the library of companies where companyId = 1]
  out 09 2009 14:05:22, 706 [http - 8080-$4 13389826] DEBUG review: 14.getDBConnection(DatabaseService.java:492) - had connection with success
  out 09 2009 14:05:22, 706 [http - 8080-$4 13389826] DEBUG review: 14.executeQuery(DatabaseService.java:281) - ExecuteQuery on [TAW_PRIVATE_DATASOURCE] with [select name, description from regionalizationlibrary where regionalizationlibraryid = 1 AND isdeleted = 0]
  out 09 2009 14:05:22, 706 [http - 8080-$4 13389826] DEBUG review: 14.getDBConnection(DatabaseService.java:492) - had connection with success
  out 09 2009 14:05:22, 815 [http - 8080-$4 13389826] DEBUG review: 14.executeQuery(DatabaseService.java:281)-ExecuteQuery on [TAW_PRIVATE_DATASOURCE] with [select lk.value as displayname, sequence, ltl.elementid, regionalizationlibraryelements ltl regionalizationlibraryid, localelanguages ll, localekeys lk where ltl.regionalizationlibraryid = 1 AND ll.usage = 1 AND lk.localelanguageid = 1 AND lk.localevariantid = 1 AND ll.localelanguageid = ltl.elementid and (ll.language + '_' + ll.country) = lk.keyid AND ltl.isdeleted = 0]
  out 09 2009 14:05:22, 924 [http - 8080-$4 13389826] DEBUG review: 14.getDBConnection(DatabaseService.java:492) - had connection with success
  out 09 2009 14:05:22, 924 [http - 8080-$4 13389826] DEBUG review: 14.executeQuery(DatabaseService.java:281)-ExecuteQuery on [TAW_PRIVATE_DATASOURCE] with [select lk.value as displayname, ll.localelanguageid as elementid localelanguages ll, localekeys lk where ll.usage = 1 AND lk.localelanguageid = 1 AND lk.localevariantid = 1 AND ('_', ll.language + ll.country) = lk.keyid AND (ll.localelanguageid not in (select ltli.elementid in the regionalizationlibraryelements ltli where ltli.isdeleted = 0 and ltli.regionalizationlibraryid = 1))]
  out 09 2009 14:05:23, 034 [http - 8080-$4 13389826] DEBUG review: 14.getDBConnection(DatabaseService.java:492) - had connection with success
  09 Out 2009 14:05:23,034 [http--8080-4$13389826] DEBUG RegionalizationLibrary.populateBean(RegionalizationLibrary.java:210) - command[]com.taw.clients.am.regionalization.RegionalizationLibraryElement@56d6cfcom.taw.clients.am.regionalization.RegionalizationLibraryElement@130b13ccom.taw.clients.am.regionalization.RegionalizationLibraryElement@1c3e3fbcom.taw.clients.am.regionalization.RegionalizationLibraryElement@1aca5e2com.taw.clients.am.regionalization.RegionalizationLibraryElement@1be9a50com.taw.clients.am.regionalization.RegionalizationLibraryElement@8518d4
  out 09 2009 14:05:23, 143 [http - 8080-$4 13389826] RegionalizationLibrary.getLanguagesFormatter(RegionalizationLibrary.java:494) DEBUG - * new LanguagesFormatter
  out 09 2009 14:05:23, 143 [http - 8080-$4 13389826] revision DEBUG: 38.getDefinedLanguageId(ProxyLoginHandler.java:971) - regionalisation return case 1 in the list [1]
  out 09 2009 14:05:23, 159 [http - 8080-$4 13389826] DEBUG review: 14.executeQuery(DatabaseService.java:281) - ExecuteQuery on [TAW_PRIVATE_DATASOURCE] with [SELECT jrelibraryid, name, description, version, classid, cabdownloadurl, type, defaultjre, sequence, isdeleted FROM jreslibrary WHERE isdeleted = 0 ORDER BY ASC order]
  out 09 2009 14:05:23, 159 [http - 8080-$4 13389826] DEBUG review: 14.getDBConnection(DatabaseService.java:492) - had connection with success
  2009 09 14:05:23, DEBUG 174 [http - 8080-$4 13389826] UserConfiguration [revision: 20].load(UserConfiguration.java:101) - User Configuration load
  out 09 2009 14:05:23, 252 [http - 8080-$4 13389826] ERROR UserConfiguration [revision: 20].load(UserConfiguration.java:232) - error loading database information
  java.lang.NullPointerException
  at com.taw.database.DatabaseService.pingDB(DatabaseService.java:69)
  at com.taw.database.DatabaseService.isConnectionError(DatabaseService.java:101)
  at com.taw.database.DatabaseConnections.executeQueryPrepared(DatabaseConnections.java:214)
  at com.taw.database.DatabaseConnections.executeQueryPrepared(DatabaseConnections.java:182)
  at com.taw.database.DatabaseServices.executeQueryPreparedStatement(DatabaseServices.java:129)
  at com.taw.clients.objects.agent.UserConfiguration.load(UserConfiguration.java:141)
  at com.taw.web.security.UserAuthentication.load(UserAuthentication.java:404)
  at com.taw.web.ProxyLoginHandler.authenticate(ProxyLoginHandler.java:227)
  at com.taw.web.ProxyLoginHandler.doPost(ProxyLoginHandler.java:126)
  at com.taw.web.ProxyLoginHandler.service(ProxyLoginHandler.java:89)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:91)
  at com.caucho.server.dispatch.ServletFilterChain.doFilter(ServletFilterChain.java:103)
  at com.caucho.server.webapp.WebAppFilterChain.doFilter(WebAppFilterChain.java:187)
  at com.caucho.server.dispatch.ServletInvocation.service(ServletInvocation.java:265)
  at com.caucho.server.http.HttpRequest.handleRequest(HttpRequest.java:273)
  at com.caucho.server.port.TcpConnection.run(TcpConnection.java:682)
  to com.caucho.util.ThreadPool$ Item.runTasks (ThreadPool.java:743)
  to com.caucho.util.ThreadPool$ Item.run (ThreadPool.java:662)
  at java.lang.Thread.run(Thread.java:619)
  2009 09 14:05:23, 362 [http - 8080-$4 13389826] INFO UserAuthentication [revision: 23].load(UserAuthentication.java:405) -.
  
  loading of the user
  
  Edited by: user10089112 09/10/2009 13:27
  
  Edited by: user10089112 09/10/2009 13:29

  It can be two problems:
  1 error then dabase population (Analize setup of the population of the database logs) GOLD direct login to databases and to analyze the USERS cca admin schema table. If the user netadmin record exists?
  2. you set up bad jdbc have resources or enter wrong parameters to the Web.XML file TAW - general.war.

  This is part of the example in the Web.XML for the Oracle database:

  
  databasePlatform
  Oracle
  

  
  databaseDatasource
  cca_ds
  

  
  databaseUser
  cc812
  

  
  databasePassword
  password
  

  
  
  class databaseSchema
  CCAADMIN
  

  
  databaseDatasourceReadOnly
  cca_ds
  

  
  databaseUserReadOnly
  ROCC
  

  
  databasePasswordReadOnly
  password
  

  
  databaseSchemaReadOnly
  CCAADMIN
  

  Replace "BOLD" with your values and redeploy the application TAW.

  Jon.

• forgotten that my bad startup password 3 times computer laptop reboot how to reset

  forgotten that my bad startup password 3 times computer laptop reboot how to reset

  Hello

  In this case, you can use windows system restore to return the machine to a point in time before this prompt syskey occurred using the following method.

  Use another PC to create a Windows 7 repair CD.  Download the ISO from the link below.

  Windows 7 64 bit

  You must use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn options) to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  Once created, type away at the esc key when you launch Notepad to open the Start Menu.

  Insert the CD to repair.

  Select the Boot Manager option ( f9 ).  Use the arrow keys to select the CD/DVD drive and press ENTER - if you are prompted to "press any key to continue...". ", do.

  Select 'Repair your computer' and follow Option 2 in the guide here to run the Windows system restore - choose a restore point at least 48 hours before the opening of session problem occurred.

  Kind regards

  DP - K

• My Acer desktop computer (approx. 1 year) ignores the key when entering. It got so bad that I am ready to t

  My Acer desktop computer (about 1 year) X1420G-U5832 ignores the letters when typing. He got one so bad that I'm ready to throw on this computer and try again. I replaced the acer with a logitech keyboard and it does the same thing. Is there a cure for this. Help, please!

  Have you tried to plug it into another USB port?

  May be a corrupted driver. Can be a good download and reinstall.

  Edit: Pilot would be looking for drivers on whatever OS you have installed the site.

• Wireless router requesting domain username, password and logon

  I recently bought a router without wire - WBR - T2 - as my old netgear router has stopped working. I can connect via the ethernet fine connection and access the internet. But on my computer Vista laptop when I try to connect to the wireless network, what I asks me to enter a username, password and domain logon. The old netgear router has not asked for these. Any help if her I need information would be appreciated.

  Thank you
  Jon

  I don't know where you get the application for the user name, etc. Your computer is on a domain? In the meantime, here is general information about the implementation of a wireless network. See if anything here helps you.

  To configure the router:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.
  MS - MVP - Elephant Boy computers - don't panic!

• Not allowed instant access to my Windows Mail without username & password! Can't remember either! WHY?

  I can't access my Windows mail. Safety sentre suddenly gives me a pop - up window, who want a username & password for connection home.  I do know this... never needed before.  Help!  What should I do now?

  I think I might need expert advice.  Nothing of what I'm trying to help me in this :(((

  If you have forgotten your username and password, call your ISP (internet service provider).
  Your ISP is the one who gave you the user name and password. They have the record. Ask them.

  At the same time ask if there is a technician who can help you with the problem of popup box.

  PS You should post this question in the forum for networking and online:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Networking?tab=unanswered

• zero or change username & password for a connection to another computer on the local network?

  When you open the network, and see you computers and or network for the Working Group action, well, I entered accidentally the wrong username / password for the computer, and I can't seem to change the username-password and or reset it.

  On the local network, I have a linux machine using samba, all permissions are correct, since the box vista * can * connect just fine and have access to everything which, however, on the vista box, I checked still remember the name of user and password, and now I can't change it on another account, I need to take it.

  I have searched for hours and I can't seem to find the answer.

  I tried to disable the account on the linux side and this does not, however, so, he says: "access denied", with no way to enter a new username / password!

  Anyone has an idea on how to solve this problem?

  Finally found the answer.

  In the cmd prompt, (Administrator rights), making control userpasswords2, and then tap the Advanced tab and finally, the button manage passwords.

• Signing authority tool: Configure the SMTP username password

  Hello

  I try to configure the signing authority tool.

  I entered in remote Client Administration, CSI file by e-mail to: my email address.

  

  However, when I run, there is an error:

  

  So, I have to configure SMTP username & password in some places. But I tried to find, but I can't.

  No idea on how to configure the SMTP username & password?

  Thank you in advance.

  The administration of BlackBerry signature tool does not support SMTP authentication.  If it's something you need I recommend logging a feature request in the incident handler: https://www.blackberry.com/jira/secure/Dashboard.jspa

• Set up username/password on 3600

  I wonder if someone can help me to install some kind of function with name of user and password. For reasons of responsibility, I would like to be able to configure the different usernames and passwords for all the engineers here. For now, all we do is telnet in and put the password in. I want to be able to track and possibly limit the powers of some users instead of just having all use the same passage and activate pass.

  Thank you!

  What you're trying to do is possible with permission of AAA. To do this on the router, these are the AAA commands required:

  AAA new-model

  AAA authentication login default [group] local

  AAA authorization exec default [group] local

  Before we get into these, plese take care of creating the database of the local user as follows:

  password username level_zero privilege 0 zero

  basic_user privilege 1 password username

  username admin privilege 15 password admin

  With the above configuration, level_zero user can execute commands only to disable, enable, exit, help and logout.

  Basic_user the user can execute all orders of level 1 and level 0.

  The admin user can run all the commands on the router.

  On the router, what are the 3 level of default orders:

  -privilege level 0 includes orders to disable, enable, exit, help and logout

  -privilege level 1 normal level on Telnet; includes all commands on the router user level > guest

  -privilege level 15 includes orders enable-level in the router #.

  command prompt

  Today based on your requirement, you can create a private bewteen 2-14 level and assign no matter what priv level 15 commands (levels 0 and 1 would be inherited by default). Here is an example:

  username password six 6 0 6 privilege

  With that, six user is only able to execute all orders of level 0 & 1. If the user needs to run "config t" on the router, to add the following line to add this command to level 15 level 6.

  privilege exec level 6 configure terminal

  I hope this helps! Please be aware of the 'show running-config' however. For a better understanding of this particular behavior of this command you see the following link:

  http://www.Cisco.com/warp/public/63/showrun.shtml

  Renault

• I can access pc window xp 7 but can't access window 7 pc of Windows xp who asked for username & password. I already had the off-ramp of password protected sharing

  1 PC having xp

  PC 2 having win.7
  2 PC can access everything shared on pc 1
  but pc 1 can't access anything whatsoever to pc 2
  It was asking username and password
  password protected sharing is already disable
  If I have a username & password for the pc 2 it would not
  These systems are mutually ping correctly.
  the Working Group is the same
  what I have to do

  Hi Anil,

  I suggest you try all the steps from the following link to make sure that all parameters are set accordingly.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  Post us the results once you try the steps above.

• How to cancel name for username/password when you access the WIn7 computer to stream?

  Hello

  I have a win7 computer and I would like to access it from a stream. I see the computer win 7 banners, but when I try to connect to access shared folders, it requires username & password. I don't know what they are. I have another computer with Vista from where I can access the computer of win 7. I can also access files on the computer of vista of banners.
  I turned on the discovery network, printer and file sharing, turn on sharing so anyone can read & write files in the public folder. Disabled password protection sharing and allowed Windows to manage the homegroup connections (recommended).
  Can any suggestions on how I disable the name of user and password? or at least what is it?
  Thank you
  Leon.
  PS: He used to work properly without a username, but suddenly he began to pose for her (probably after that I restarted the computer or the streamed)

  Hello

  I understand that you want to cancel the name for username/password when you access the WIn7 computer to stream.

  I suggest you to send your query on the forum of streamer and I hope that they will be able to guide you in the right direction.

  Here is the link:

  http://support-splashtop2.Splashtop.com/forums

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• After the change of username & password for wireless internet connection WiFi printer is not responding.

  Original title:

  Canon Pixma MG5200 (printer WiFi)

  I changed the username & password for my wireless connection internet and since then my WiFi printer does not respond after that I did mentioned the new configuration. I tried to reset the printer with its installation CD, but at the end of installation, I get a message that the printer is not found on the network. I also read the help manual, but I couldn't solve the problem... I really appreciate a clear explanation for having my printer answer & working again.

  Hello
   
   
  1. what exactly happens when you try to print? You receive an error message?
  2. other wireless devices work properly?
  3. what operating system is installed on the computer?
   
   
  Check if the printer is on and properly connected tour.
  Method 1:
  You can run the fixit from the following link and check if it works:
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Try the steps in the following article and check:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  You can also consult the following link:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  I hope this helps!

• Message to username/password invalid when you try to connect to the computer on a homegroup.

  Original title: Second computer cannot find the domain of the first computer in a homegroup

  I have a 2 computer homegroup.  Each computer is says that it is a member of the homegroup.  No matter what computer created the homegroup has no difficulty to access each other, but who later joined can not reach the first.  There is always a message to username/password invalid.  In addition, in the left panel, the computer that joined is not listed under "homegroup" but the computer that created the homegroup sees the one that was added.  This works the same regardless of the order in which everything happens.  I used to think some userid is messed up, but since it works when I reverse the process of creation/join I suspect it's something different.

  Found.  It still does not make any sense, but...
  Remember that this is always the computer that created the homegroup that is the problem.  When you go through Control Panel / homegroup computers are said to belong to a homegroup.  When you go to networking and click to view the entire map, there is this message that says that you have been invited to join a homegroup.  Don't forget, it's the computer that created the home group.  In any case, logical, if you agree to join the homegroup, you have created - and the "homegroup" says you are already a member-all right.  Works fine now.  Go figure.