Envy to screen 17 "M7-J120dx touchscreen: touchscreen / lcd and keyboard

Similar Questions

• my envy touchsmart screen is sideways

  My Envy Touchsmart screen is on the side... When I re-start, it always is sideway. When I went on the forum was not seen anyone who had the question displayed.

  Hello

  Try to press and hold the Ctrl and alt keys, then press the arrow upward.

  Kind regards

  DP - K

• HP Envy Touch screen Smart questions

  I bought my new laptop from best buy about 2 months ago and everything as I had first, there screen problems. If the screen is barely touched or moved glitches and goes black. I have to go down and lift it upwards. Sometimes severel times so that he can see again. Is this a common problem? And how to fix it? My laptop is

  HP - ENVY TouchSmart 17.3 "touch screen laptop - 8 GB memory - 1 TB hard - silver modern model number m7-j010dx

  This isn't a common problem.

  Contact HP for warranty service.

  Let the representative will send you an email or talk to know that you were here at the forum.

• Frozen, paved touchscreen and keyboard on HP Pavilion dv6-3225dx Entertainment Notebook

  Extremely frustrated I looked and tried to find a solution without success. When the laptop starts up, it gets to the login screen, I wouldn't be able to do anything at this time there but I can connect because I a reader of fingerprints, there, I'm 100% dead in the water. The only way to stop is to hold down the power button. When the computer is starting up, I function touchpad/keyboard, I can escape the boot options, BIOS, repair, etc., and have normal features while there, but not in safe mode. I ran SFC with orders several times, chkdsk with orders several times, nothing changes. SFC said he found problems, but wasn't able to fix all of them and the last chkdsk finds nothing wrong.

  Here are the events leading to:

  * had errors of disk with bad sectors in the old drive hard (could not repair)

  * clone old hard drive to a hard drive nine (there were errors but the new hard drive booted and worked for the most part correctly)

  in trying to try to repair the installation files missing for applications and other small issues, I ran troubleshooting, updates, chkdsk, sfc, etc removed various applications and added some, nothing worked. I installed Revo uninstaller to remove Kaspersky Internet Security because it is the MOST tenacious application to remove I've ever known. The reason I remember it is because I went through my computer to pick up the remaining files even after Revo because Kaspersky was always after the re-install and uninstall again. There are some files in System 32, who had kaspersky attached to its description. I stopped to run and deleted. They were close kb files and after searching for files to remove, I myself remember at the end of the post it says that it would not remove a certain file beacause you wouldn't keyboard functionality. I made sure that I don't have, but I can't help thinking now that of the 6 files, I deleted (some of them core) can I have deleted the files of mouse and keyboard by mistake.

  * The last time I had a functional touchpad/keyboard under Windows, I ran sfc/scannow damaged = d:-/offwindir = d:\windows started at the command prompt. I got the same message that it found errors but did not set all. So I ran chkdsk /f /r from the command prompt start. When I got back to my computer after a few hours, I restarted and no longer had a touchpad or keyboard.

  I'm in the arms and extremely frustratd because I believe that I tried absolutely everything to make them work again. I hope that the only option I have left should format and clean install. I did not have a full upward and can not get a fully executed at this stage.

  Help, please! Thanks in advance for any suggestions and help that you may be able to provide, it is much appreciated!

  The following link leads to the support page of my laptop.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=5051461&LC=en&cc=us&DLC=en&lang=en&tmp_track_link...

  At this point, you need to perform a system recovery to return to the factory-installed state. SFC is not able to solve a problem of file system indicates a deeper problem that could work only a new installation. The only other option would be if you had a full Windows disk for your system to perform a repair install, but the OEM computers do not come with a disc of the operating system.

  Before continuing, let's check some things because I am sure you want to keep as much data as possible.

  You still have the cloned disk image? It sounds like the keyboard and the touchpad worked after the image has been loaded on the new hard drive. Is this correct?

  Something has been added since the image has been restored on the new hard drive? (photos, music, personal files, etc.).
  Part of the process will be to restore the image of hard drive to external copy of all the files you want to keep. As it is, a clean install will erase everything and a defective hard disk image would give the possibility to save anything in the image on an external drive or a drive.

  What is the new hard disk? As the brand, model, size, etc.

  You have the recovery disks for your system? This could have been done when you got the system or ordered from HP. either all should work.

  Another option to backup your files may be to use a live CD of Linux that has been done using another computer. Are you comfortable with Linux? This method is certainly not for everyone and I am not able to provide step by step instructions, but it's another option to save files.

• RE: iOS iPhone 6 s 10 how l remove or disable the slippery camera from outside the locked screen? This feature is a security and threat privacy for me.

  RE: iOS iPhone 6 s 10 how l remove or disable the slippery camera from outside the locked screen? This feature is a security and threat privacy for me.

  You can not. However, I'm not sure why you think it's a privacy or security threat. The only thing that can be accessed without unlocking the phone is the camera to take pictures. No one can access your data already on the phone.

  You can send feedback to Apple here:

  http://www.Apple.com/feedback

• Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.

  Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.

  Here I answer to my problem: I upgraded my graphics card and the problem seems to have disappeared.

• Questions from the screen and keyboard on Satellite R830-181

  Hello

  I had exactly the same problem with it;
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=280934

  I also explained what is it and how it over time in this topic.

  To sum up; my screen and keyboard do not work in my Toshiba Satellite R830-181, 13.3 '' laptop.

  My questions;
  1. is it a motherboard problem?

  2. as it runs on an external monitor, I guess that the graphics card or processor is fine.
  There is no damage on the screen, so I guess there is a problem with the connection of the power supply to the screen.

  If I buy a new screen I have my doubts it will work.

  I'll probably send it to the service tech in my country (hard to find here reliable technology services Toshiba), however, I would like to know what may be the cause and if I can fix it myself.

  What do you think guys? It is a power issue or a problem with the monitor itself?
  If a power issue or something else rather than the screen, how can be fixed?
  Same question applies to the keyboard.

  3. If I repair or fix myself, you think it will happen again? Because I think that this could be a faulty laptop computer of a certain series of production since someone else has experienced the same thing with this model.

  can 4 - there be a relationship between the non-functional keyboard and screen?

  5. If this can be resolved with a replacement of the screen, that I need to find a laptop screen Toshiba R830 or I can buy any 13.3-inch screen?

  As far as I know this model is not supported by the company more, so it is quite difficult to find a screen R830.
  It is difficult to find a 13.3-inch screen, anyway, but still, if I can use the screen of another model which would ease my problems.

  I need an idea on that.
  Thanks :)

  Post edited by: Cagri87

  > 1 - is it a motherboard problem?
  Not easy to say: If the external monitor works correctly then this isn't problem chart/motherboard.
  The external USB keyboard works properly, if not motherboard problem too.

  > 2 - because it works on a monitor external I guess graphics card or processor is fine.
  Yes, that's correct.

  > If I buy a new screen I have my doubts it will work.
  I do not recommend to buy the new parts before the defective parts has not been verified.

  > I'll probably send it to the service tech in my country (hard to find here reliable technology services Toshiba), however, I would like to know what may be the cause and if I can fix it myself.
  Good idea to send it to Toshiba service partner since the guys would be able to control parts and fix it.

  > What do you think guys? It is a power issue or a problem with the monitor itself?
  If a power issue or something else rather than the screen, how can be fixed?
  > Same question goes for the keyboard.

  Don t think someone can tell exactly what's causing this according to me its just a bad luck material can start malfunction happens in every possible branch of industries (TV, computer, smartphone, cars)

  can > 4 - there be a relationship between the non-functional keyboard and screen?
  No, the keyboard is only connected to the motherboard, display is also connected to the motherboard, but there is no connection between the keyboard and the display.

• I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  iPhones have a proximity sensor which is supposed to automatically turn off the screen when you hold it in your face. If this is not the case you can take the phone and have it checked.

• Z510 gets dirty fast how to clean screen and keyboard and coverage

  I have a z510, always gets dirty fast, on the screen and keyboard and the coverage, how can I clean up the mess without harming the laptop

  Note of the moderator; subject published

  Hi thabit,.

  You can use a Microfiber cleaning cloth to clean the dirt off the LCD screen. Regarding the keyboard and coverage, you can use the same type of cloth and dip slightly in a 70% isopropyl alcohol to clean these areas.

  Guides:

  How to clean a computer monitor/LCD screen

  How to clean a laptop keyboard

  Concerning

• I try to send an email I get a message at the top of the screen actually say that Hotmail cannot process and suggesting I check my internet connection.

  My hotmail account is playing up - suggestions pls for the following scenario.  I try to send an email I get a message at the top of the screen actually say that Hotmail cannot process and suggesting I check my internet connection.  I check the connection and everything is ok.  I'm trying to move from one folder to another and sometimees I get the same message.  I delete the 'old' content and it reappears in the folder.  Everything is very confused.  Any suggestions please?

  Please try the Hotmail Forum http://windowslivehelp.com/forums.aspx.

• My laptop computer screen flashes a few times (very rarely) and after some time screen goes white

  I use compaq V6000 computer laptop with windows xp. My laptop computer screen flashes a few times (very rarely) and after some time screen goes white, I hear only audio. After the reboot, it works normally for hours. I used to know the reason for this and the solution.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Read the following article that may help you resolve this problem.

  Resources for troubleshooting problems in Windows XP
  http://support.Microsoft.com/kb/307960
  Glitter wallpaper
  http://support.Microsoft.com/kb/555373

• The color on my gateway screen is terrible... too blue and white appears pink, who can help me?

  The colors are terrible on my screen... the White is pink and shades of blue are too bright as the red... Please help...

  Hi EPrieto,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?

  Check first for the buttons on the monitor to change the color and the brightness of the screen to consult the monitor manually for more information.

  Also, check if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  I also suggest that you download and install the updated drivers for the graphics card on the computer by visiting the adapter or the computer manufacturer's website and check, if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Anyone know if where I can download the keyboard screen on again once... my normal keyboard broke, and some how I enlarged it on screen one and cant end settings or information to do little new... its takng upward all over my screen :(

  Anyone know if where I can download the keyboard screen on again once... my normal keyboard broke, and some how I enlarged it on screen one and cant end settings or information to do little new... its takng upward all over my screen :(

  Try this:

  Ctrl + alt + delete > bottom left on the Page, click, accessibility > uncheck, magnifying glass, keyboard

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• Mouse and keyboard not working only not to the login screen

  Hi, I was recently infected with Antispyware Soft virus. In my attempt to remove it, my screen went black, so I had to restart my computer. Entering my login screen, I was unable to connect because my keyboard and mouse no longer works. I tried to start the safe mode too and they still do not work on the login screen. However, they work at the start of the BIOS. I looked around, but I couldn't find any option for Legacy USB drivers. I went to a few USB option and select [Enabled] and it still doesn't work to the login screen. I have no PS2 port, so I can't try it. I was also able to use my mouse and keyboard when you attempt a repair of the system to do a system restore, but that solves nothing. I am at a loss what to do. I hope someone is late, as I'll be gone tomorrow/more day late today. I am writing a computer laptop and unable to remember any care my office except the fact, it's Windows Vista.

  Hi HellMuT1,

   
  We recommend to use a different mouse and keyboard, then check the result. If the problem persists, try the following steps.
  1. Insert Windows Vista DVD.
  2. restart your computer.
  3. let the computer restart (boot) from the DVD.
  4. If you are prompted, press a key to continue.
  5. When you reach the screen install Windows, select your preferences in the language to install, time and currency format and keyboard or input method boxes, and then click Next.
  6. do not click on install now. Instead, click on repair your computer. The System Recovery Options dialog box appears.
  7. make sure that the appropriate operating system is selected, and then click Next.
  8. After you click Next, the System Recovery Options menu appears.
  9. click on command prompt.
  10. type devmgmt.msc and press enter
  11. on the window Device Manager, in the object list, expand mice and other pointing devices.
  12. make a right click the sub element and click on uninstall.
  13 expand keyboards.
  14. make a right click the sub element and click on uninstall.
  15. Type exit and press ENTER to restart the computer.
  16. remove Vista DVD and restart the computer to see if the keyboard and mouse works fine.
   
  Do the repairs to the system of Windows recovery environment
  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I turn on the computer, the screen indicates "a problem has been detected and windows has shut down to prevent damage to your computer.

  Original title: when I turn on the computer.

  the screen shows "a problem has been detected and windows has shut down to avoid damaging your computor.

  Hi Cjdaniello,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I hope this helps.