BAdialer trying to connect to on port 40072 rogger

Similar Questions

• Trying to connect a computer to the lan port Aiport Express "auto assigned IP address"

  I am trying to connect a computer to the lan on my Airport Express port. In preferences, it says "status: connected, Ethernet has an assigned IP address and won't be able to connect to the internet." Any suggestions?

  An "auto assigned" IP address indicates that your computer could not find or negotiate with a DHCP server to obtain an IP address appropriate for network access.

  It should be more on your network to provide assistance if you need it. For example, is the terminal of AirPort Express the only router in the current configuration of your network? What exact model do? What is the brand and model of your modem Internet?

• Windows PE and 7 clients trying to connect to servers on port UDP 500

  We have a lot of nie on our internal firewall from various machines in our area who are trying to connect to servers on port UDP 500 that are fill newspapers on the firewall. Servers usually aren't domain controllers, some are Terminal Server servers and one our imaging Server (LANDesk). Clients fail to connect to the VPN either. We do not use IPSEC anywhere in their own country.

  It seems that UDP500 traffic is generated when accessing other services on the server such as RDP or file-sharing, not all clients are and stop the IKE and AuthIP IPsec Keying Modules service on the client seems to stop packets. So I think I know what it does but I don't know why. I have some screenshots of our managed service provider package and connected remotely to a system running Windows PE, looked with TCPView and valid traffic that packages stop when the IKE and AuthIP IPsec Keying Modules service is stopped. I do not think its malware.

  I'm really excited to know what mechanism is causing these packages and knowledge if we accept it or not.

  Any advice would be much appreciated.

  Thank you

  Paul

  Paul

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Original title: multiple monitors

  I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Hi David,

  Thanks for posting your query on the Microsoft Community.

  I suggest you refer to the Microsoft Help Articles below and try the steps mentioned.

  Check out the link:

  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors#1TC=T1

  You can also check:

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• I tried to connect by Satellite to TV VGA and S-video help

  Hello

  I have Toshiba Satellite and I am trying to connect with the TV using S-video and VGA but not off them worked. It s deflected on television at the start of the laptop but not showing TV out on laptop when you press FN + F5 to switch. Coming to the settings display, attached box 2 after withdrawal of box 2 settings.
  Can you please help me?

  Thank you.
  Vinod

  Hello

  What laptop do you have exactly and how connect you to the TV?
  Did you use a VGA adapter S-video?
  If I understand the laptop supports only VGA and s-video TV port only.
  Is this good?

• Re: Qosmio G30 - trying to connect laptop to normal TV (not HD tv)

  I have a model 161 G30 and tried to connect the laptop to the TV via s video output. But I have no image.
  Which options should I choose when I press FN + F5 and the other changes do I have to do.

  For TV, I use a SCART / adapter SCART to connect the s-video to the TV and also have the right audio cable coming out of the headphone on the laptop.

  I was told that by connecting the two and then turn them I, by pressing FN + f5, I would get a choice of display options, but I get the normal ones...

  I know that this subject has come up before but after reading everything I was not able to solve my problem
  Thanks to everyone for their help in advance

  Hello

  You use the FN + F5 key combination you must enable port on your TV. I do not know how old the TV is and whose parameters are there but do not forget that the port is enabled or the right channel is chosen (for external devices). I tested this with S-Video and Video cable adapter and it works well. Make sure that you also use proper adjustment of input/output.

  It should work somehow. Play with these settings.

• I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

  How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

  Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.

• How to read and display a my a miccrontroller (MCB1700) on labview signal connected via a port on a PXI machine CAN

  How to read and display a my a miccrontroller (MCB1700) on labview signal connected via a port on a machine PXI CAN?

  I tried using a DAQ Assistant, but the port is not included as one of the physical channels supported, even if all his drivers are up to date.

  Help, please...

  Thank you.

  If you can read it in MAX, then you should be able to run the NI CAN example.

  Help-> find examples

  Find the CAN and watch CAN Receive.vi.

  Basically, set up the network, open the object, read in a loop close object when it is done.

  If you have any questions about the example, go ahead and post your vi and we can work from there.

• I'm trying to connect my photosmart 2610 to a wireless network. Following the online instructions, I have

  I'm trying to connect my photosmart 26110 printer to my wireless home network. By following the online instructions, I find when I get to the network menu on the printer, I don't have a network configuration option. So now what?

  The printer is currently connects to a PC via USB. I want wirelessy this network printer for my Mac to print to it also.

  LAN means Local Area Network.  It comes to your home network.  WAN means Wide Area Network.  This is the port to connect to your service provider, or in other words, where the Verizon's Internet connection needs to connect.  It shouldn't be to hard to get the Macbock to install the printer on the network.  The document below will guide you in the process.  Let me know what happens.

  Install the software from the product under Mac OS X for a wired network connection (Ethernet)

• Inspiron M511R Service Tag: NOTES from the ADMIN: maintain the label removed by privacy policy > trying to connect it to my TV.

  Greetings:

  I don't know what to do and have tried anything yet.

  If possible, can you guide me through this? I am

  trying to connect my PC to a HD of VIZIO TV.

  Thank you

  Hi 88Inator,

  Your computer and television have VGA and HDMI ports. VGA port is on the back of the system and HDMI on the left as shown in the images below:

  

  Chassis rear feature locations
  1	Security cable slots
  2	Network (RJ-45) connector
  3	USB 3.0 connector
  4	VGA connector
  5	AC adapter connector

  

  Frame left
  1	USB 3.0 connector
  2	Ventilation openings
  3	HDMI connector
  4	eSATA/USB 2.0 connector
  5	Card reader

  You can connect your TV with VGA or HDMI port. To connect to the TV with your laptop computer using the VGA ports, need you a cable that has VGA ports on both ends. Otherwise, if you want to connect to the TV with your laptop using HDMI ports, need you a cable that has HDMI ports on both ends.

  Note: once you connect the TV with your laptop, make sure you only select the appropriate mode on the TV depending on the type of connection (please refer to the manual of your TV). Additionally, you have to press Fn + F1 to switch the image on an external monitor. Options include the built-in display, an external monitor and both screens at the same time.

  Just reply to other questions.

• P2415Q does not turn on the connection with display port cable

  Hello

  I have computer with Sapphire hd 7970, there display port and HDMI outputs.

  I plugged the cable I got with the monitor for mini DP DP and it worked well for a week,

  Today, I turned on my computer, that the computer turns on I hear the windows starting but there is

  no signal on the screen, so I tried to connect it with the second DP cable I have but it still does not work.

  I also connected the computer to another monitor DP cable and it works fine.

  Please notify.

  Thank you.

  * Turn off the monitor
  * Disconnect all cables from the screen, including the power cable
  * Press the power monitor in pendant button 15 seconds
  * Reconnect monitor cables and re - test

• Error code 651 while trying to connect my computer to the network

  * Original title: Please help

  I am trying to connect my computer to work at our network and when I try to connect to our broadband network he said WAN mini port connection and then it gives me an error code 651.  Does anyone have a suggestion?

  You are probably connected through the bad device.  You must have a wireless to laptop (?).  If so,.

  Control Panel

  Network and Internet

  Network Sharing Center

  Change the settings for the adapter.

  Make sure that the network adapter to use is selected

  Right-click on it and select Connect

• ORA-28545-error when trying to connect to a MSSQL DB

  Like many others, I came across problems trying to connect to a MSSQL-DB. I tried various things mentioned in the forum, but nothing helped.

  I did the following:

  On Windows INFORDBSERVER02 servers where our Oracle11-Installation is hosted, I installed the software bridge in a different location.

  During installation, I decided to use the port 1531 for the listener, and then asked me about the connection parameters to our MSSQL Server:

  Our database is located on the 'profileserver02' server and the DB is called 'profile', but there was an entrance third (for me unknown) and I gave him the same value

  as the name of the server.

  The listener has started and there was a listener.ora with the following entries:

  LISTENER_PROFILE =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = INFORDBSERVER02.fmbb.local)(PORT = 1531))

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1531))

  )

  )

  ADR_BASE_LISTENER_PROFILE = D:\Ora_GW

  I then checked the initdg4msql.ora, which had entries

  HS_FDS_CONNECT_INFO = [profileserver02] / profileserver02/profile

  HS_FDS_TRACE_LEVEL = OFF

  HS_FDS_RECOVERY_ACCOUNT = RECOVERY

  HS_FDS_RECOVERY_PWD = RECOVERY

  On the server where I want to get access, I've added an entry for the tnsnames.ora:

  dg4msql.INFORDBSERVER02 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = INFORDBSERVER02.fmbb.local)(PORT = 1531))

  (CONNECT_DATA =

  (SID = dg4msql)

  (GLOBAL_DBNAME = dg4msql.INFORDBSERVER02)

  )

  (HS = OK)

  )

  Finally, I created a link DB:

  CREATE DATABASE LINK PUBLIC profile02 CONNECT TO "anw' IDENTIFIED BY 'password' USING 'dg4msql.infordbserver02 '.

  I tried to access the DB in issueing of position

  Select * from dual@profile02

  I got the errormessage:

  Error: ORA-28545: Von Net8 bei der zu einem Fehler diagnostizierter agent connection

  Cannot retrieve the text of the message NETWORK/NCR 65535

  ORA-02063: before 2 lines von PROFILE02

  SQLState: 99999

  ErrorCode: 28545

  Position: 19

  I changed one line in the listener.ora, namely

  HS_FDS_CONNECT_INFO = //profile [profileserver02]

  that got rid of this third unknown parameter, but nothing has changed...

  I tried to use the listener.ora.sample in the dg4msql directory

  LISTENER =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = tcp (PORT = 1531))(HOST=localhost))

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = dg4msql)

  (ORACLE_HOME = D:\Ora_GW)

  (PROGRAM = dg4msql)

  )

  )

  #CONNECT_TIMEOUT_LISTENER = 0

  but then the listener has not yet started.

  Any tips?

  For the first listener that you posted you do not have a section of SID. So he won't be able to lay a bridge. In addition, it would be easier when you use the earpiece of the spawn House door entrance to the gateway process o gateway.

  So put a listener.ora file at your home, gateway network\admin with this content:

  LISTENER =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = tcp (PORT = 1531))(HOST=localhost))

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = dg4msql)

  (ORACLE_HOME = D:\Ora_GW)

  (PROGRAM = dg4msql)

  )

  )

  Then stop the LISTENER_PROFILE listener, open a DOS window and correctly set the ORACLE_HOME. Change to D:\Ora_GW\bin and start the listener using lsnrctl start.

  What I don't understand is your comment:

  "

  I changed one line in the listener.ora, namely

  HS_FDS_CONNECT_INFO = //profile [profileserver02] '.

  I assume you are talking about initdg4msql.ora...

  So let's just check the link if it works...

  If not, please provide a status of Auditor for the listener of the entry door and an exit of tnsping from home using "tnsping dg4msql.INFORDBSERVER02" database Oracle

  -Klaus

• Unable to access Adobe Folio Builder using Indesign (CS6) on Windows 7, the error message is 'an error has occurred trying to connect to the Folio Builder Panel' [IMS_ERROR_FAILURE]

  Unable to access Adobe Folio Builder using Indesign (CS6) on Windows 7, the error message is 'an error has occurred trying to connect to the Folio Builder Panel' [IMS_ERROR_FAILURE]

  Here is a list of the ports/areas to the whitelist to access the DPS Server problems

• There was an error trying to connect to the View Composer.

  Like most others, I try to get 4.5 view running

  I have Vcenter 4.1 and 4.5 seen installed on Windows 2008 R2 VMs 2.

  I installed view composer 2.5 on the Vcenter server on the default port 18443.

  I have disabled the firewall on both machines to make sure can communicate.

  But when I try to connect to the server to connect to the composer I get only error while trying to connect to View Composer.

  I am at a loss at this stage,

  The only thing I can find in the case of the newspapers is lower, it shows the same time I did install it.

  There is no information identifying the appropriate default server on this system. This will prevent server applications that expect to use the credentials of the system default to accept SSL connections. The directory server is an example of such a request. Applications that manage their own credentials, such as internet information server, are not affected hereby.

  I think that stuff VM manages its own credentials.

  Any ideas?

  Have you checked that the composer function is running on your vCenter Server? Nothing in Event Viewer related to the composer?