band graphic mention and hand

Similar Questions

• HP envy 17: hp envy 17, need a card wifi dual band 2.4 and 5 G

  I want HP 17 inch. I know that I have the ralink wifi card that supports only single band 2. 4 g. I want to replace the card so I can receive dual-band 2.4 and 5 G please indicate on which card will work with my device? I'm happy to give more details on my machine, if you could tell me how to get them. Thank you.

  Product number: C2Y69AV

  Description: HP ENVY DV7T-7300 CTO QUAD EDITION NOTEBOOK PC

  RALink RT5390R 802.11bgn adapter Wi - Fi 1 x 1

  Windows 8.1

  Will this work? Regardless is there a better option?

  http://www.Amazon.com/Intel-7260-HMWG-wireless-AC-7260-Bluetooth/DP/B00DMCVKMU/ref=pd_cp_147_1?IE=UT...

  I see a lot of discussion around this issue, but nothing that was exactly my scenario.

  FWIW, I installed the one I mentioned in the original post. It is plug-and-play and worked like a charm.

• Graphics card and power supply upgrade help

  I wanted to update my current graphics card and the power supply. I'm looking to spend under $ 300.00. Any help is greatly appreciated.

  Data sheet:

  HP p6714y Amd Anthlon II x 4 640

  4 GB of Ram

  1 TB harddrive

  OPERATING SYSTEM

  Windows 7 64 bit

  Middle size ATX case

  250w PSU

  Nvidia Geforce 6150SE integrated graphics

  1 PCI Express x 16

  2 PCI Express x 1

  1 PCI

  Thanks for the info,

  I was mainly looking for run EVE Online and some other MMORPG. So any graphics card capable of handling most of the MMORPG will be fine.

  I'll look into the graphics cards you mention also. Thank you!

• Satellite L300 - 145 (PSLB0E) - missing graphics, LAN and WLan card

  Hello

  I have recently reinstalled windows Vista Home Premium but now I have a few missing drivers.
  The graphics card and Lan and WLan are missing.
  I download and installed the Lan and the controllers of the graphics card but I can not find the right WLan.

  The problem is that the USB WiFi card is not reconnized and shows as "unknown device".
  I looked in the property inspector and I found this product shows 2 id values: USB\VID_0BdA%PID_8197&REV_0200 and USB\VID_0BA & PID_8197 and at Port #0006Hub_ #0007 also, under the name of fisical object I find it \Device\USBPDO-9.

  I am not sure that this is the Wlan card, but since is the only thing that works properly, I think it is all. I tried intel antheros and drivers realtek, allways relocation previous no conflict would happen, but still nothing happens and windows still doesen't reconnize itm so

  If please, what is the name of the card and where can I find the RIGHT controller for her?

  Hello

  First of all really get you all the drivers for your laptop on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  The drivers are pre-tested so I can't imagine that none of them work.

  On this site http://www.pcidatabase.com I tried this vendor ID but I can t find anything. Only with the device ID 8197, it shows a Realtek WLAN card so I guess you have to use this driver.

  Please check again! Make sure you have installed the SP2 at least and before you install the WLAN driver again, delete all other versions and clean the system using CCleaner.

• in iBooks author, how can I change the book ID?  I update often books and hand but ID remains the same, so it caused problems when others discover.  I wish it were as if it were a new book with a new code.

  in iBooks author, how can I change the book ID?  I update often books and hand but ID remains the same, so it caused problems when others discover.  I wish it were as if it were a new book with a new code.

  From the link 'related items' below, see:

  Give your book a new internal ID.

• Satellite P750-05F reserved graphics memory and best driver nVidia

  I recently bought a P750-05F.
  Windows 7 say systems specifications

  8 GB of ram installed. 6 gig available for the RAM of the system.
  For the graphics GT540M said he dedicated 2 GB, 4 GB available.

  Obviously 2 gig of system ram is reserved for graphics. How can I cancel it?
  I think that 2 gig dedicated is more than enough.

  I want to free the RAM of the system 2 gig reserved for RAM in the system.
  I can't find any bios or graphics driver for this options?

  Also, what is the best driver nvidia latest to use for best performance on this laptop?

  Help, please.

  Share the graphics card only if memory his need. But you can't change it manually. This is controlled by the graphics driver and the whole process is executed automatically.

• Satellite L300D - graphics card and CPU change

  Hi is possible to upgrade CPU speed and graphics card without having to buy the new phone, but just to buy a graphics card and a new processor and replace the one I have in my laptop? If it's possible there's guide on how to do it right? Thank you.

  Also my laptop overheats much faster, and I have even a portable cooler, what should I do? There is no dust and it's ran clean.

  Hello

  Regarding the hardware upgrades, you must check similar topics. It s is not possible you can also read here:
  [Is it possible to upgrade the CPU or GPU of a Toshiba laptop computer? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=13]

  If your laptop is overheating, you should try to clean using compressed air stream:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  As you can see, all your questions are already answered in other threads, so you should do a forum search before starting a new thread. ;)

• Qosmio G10 with the new graphics card and pcb - CD update tools do not work

  Hello world

  I hope you can help me. Before a few weeks, I received my Toshiba Qosmio G10 return of aid, because the laptop no longer works. So I get it back with a new graphics card and a new PCB. With my laptop I have a CD called the update tool CD and a sheet of instructions, where it says to start with this tool CD-Rom update after you have installed the Windows with the reovery CD.

  So I did, but when I know the update tool CD to put in and I start with it, the computer installs something, but after a short then it is a message that it is a different model and that I have to put a button to close Notepad. So I did it, but Windows does not start.

  Why is it so? I had done everything that has been said on the instruction sheet.

  Please help me

  Hello

  It will be interesting to find more information on this CD-Rom tool update. Are there tags Toshiba? Can you please write what is described here?

• Where can I find the 'graphic moment and trigger Configuration vi '?

  Where can I find the professional tool #5: NOR-DAQmx graphic timing and trigger Configuration vi. It is discussed here http://www.ni.com/white-paper/3697/en/ but the link for download is broken.

  Is that what you are looking for?

  http://www.NI.com/example/28285/en/

  Check out the docs llb and Word attached on the left.

• I just put a graphics card and I can not all the sounds of my hdmi on the back of the Badr

  Radeon hd5450

  I just put a graphics card and I can not all the sounds of my hdmi on the back of the Badr

  Hi Edrey Davila,

  1. what operating system is installed on the computer?
  2. are you sound the computer?

  If you connect your computer to the TV using a HDMI cable, try the steps from the following link:

  Connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  HDTV: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

• 4730 proBook s: Standard VGA Graphics Adapter and Base system device drivers

  Hello, I have a problem with my device manager.  I need to fix or update/install drivers for a Standard VGA Graphics Adapter and Base system device drivers. I can't find anything useful, I please help.

  Best regards

  Hello:

  You need this driver for the card reader (base system device).

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060894&swItemId=ob_116003_1&swEnvOid=4059

  In order to provide the correct graphic driver, I need to know if your laptop's graphics card Intel or AMD/Intel switchable graphics.

  If there is just a standard vga card listed, then you probably need just the driver intel graphics.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060894&swItemId=ob_103472_1&swEnvOid=4059

  If there are two adapters listed standard vga, so you need this driver.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060894&swItemId=ob_101995_1&swEnvOid=4059

• Windows Vista does not recognize the graphics card and the broadband

  Original title: recognize the graphics card and the broadband connection

  Windows vista can't recognize the graphics card and the broadband connection in the Dell laptop

  Hi mfadhelmu,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. you receive messages or error codes?

  4. have you updated all device drivers?

  You can try to launch the Fixit and see if it helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Alienware X 51 - graphic R1 and food issues

  I bought the base model Alienware X 51 in March 2012 and have a few questions in what concerns the upgrade of the power supply and graphics card. Currently, he has the GeForce GT545 graphics card and a power of 240 w. Also, my order said it's an Alienware X 51 BTO, so I don't know if that will affect upgrade parts. The Control Panel indicates the model is an Alienware ANDROMEDA_R5 but I saw a post that says that there is only R1 and R2, and R5 is a mistake.

  1. It is also easy to buy the 330W power supply and plug it into the computer without tinkering with the internal power parts? I read the older posts that said it's as simple as that, but I want to have updated confirmation.
  2. Are the GTX 950 and GTX 750 it compatible with the system both? I'm looking at one of these two if it is possible to upgrade the power SUPPLY and graphics card.

  There were three revisions =.
  X 51 - R1 2012
  X 51 - R2 2013
  X 51 - R3 2015

  Yes, as simple as that. Just look for the Dell 5 part number figures on the web =.
  XM3C3 adapter, 330w, 3-pole, Delta
  Adapter from MYRRH, 330w, 3-pole, Delta

  Read this thread on X 51 - updated R1 to level.

• Upgrade Alienware 17 r2, graphics, memory and SSD; heating system and stops

  I tried to find information on the upgrade from my old system of r2 to Alienware 17 with new graphics, memory and an SSD, but I've been to find contradictory information on it, and if I would still be able to upgrade my graphics.

  My current setup is:

  Computer model M17x

  OS version Microsoft Windows 7 Home Premium

  Processor

  Manufacturer Intel Core i7 CPU M 620 @ 2.67GHz

  Clock speed 2.7 Ghz

  L2 Cache size 256

  Memory

  Available memory 35.50%

  The file size of the page 10 048,7 MB

  Available Page file 85.84%

  Virtual memory 10 048,7 MB

  Available virtual memory 63,04%

  M1 2 048,0 MB

  M2 2 048,0 MB

  Network card
  Storage
  Material

  Type Description

  CD-ROM/DVD-ROM readers Optiarc DVD +-RW AD - 7640S

  Disc players ST9250410AS

  Graphics cards AMD Mobility Radeon HD 5800 series

  IDE ATA/ATAPI controllers Intel (r) 5 Series 6 Port SATA AHCI Controller

  Keyboards, mice & pointing devices Synaptics PS/2 Port TouchPad Compatible mouse HID Microsoft Hardware USB mouse Compatible mouse HID

  Monitors Generic PnP monitor

  Sound Devices IDT High Definition Audio CODEC AMD High Definition Audio Device

  USB controllers Intel (r) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - B 3, 34 Intel (r) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C

  First of all, the graphics card can be improved and if so, should I go with?

  Depending on the type of memory I thought to install is:

  Crucial Ballistix Sport 16 GB DDR3 - 1600 PC3-12800)

  I heard that 8 GB was supposed to be the max, but that was only because it was all that was available at the time, the system was released and that others have used up to 16 GB.

  It will work or is there another suggestion?

  Thirdly, the SSD I plan on installing is:

  Crucial BX200 480 GB SATA III 6 Gb/s 2.5 "Solid State Drive CT480BX200SSD

  Still, I read the system never was not originally designed to support SATA III but if you use BIOS version A09 it would work.

  Is that correct or suggestions?

  The last two things I was wondering was that the system overheat easily and stops, to rebuild the thermal paste on the CPU and heatsink help correct this?  As well as to clean the fans, of course.  Or are there other options I should look into?

  Anyone know where to buy a new adapter power for this system as well?

  Thank you in advance for any help you can provide me with.

  Hello.

  First of all I would like to ditch the 620M processor, it's i7 below, you can get and dual-core only, not quad.

  You should be able to find an i7 820QM at a reasonable price, these days, 920QM or 940QM would be even better, they were the fastest available for this model.

  Once you have upgraded the CPU to something on an i7 720QM you can upgrade you RAM to 32 GB at 1333 MHz with no problems, if you want faster than 1333 you need to adjust overclock settings in the system BIOS.

  You have two HDD slots, up to any size SSD 1 TB plug-and-play (or to the more require very few adjustments BIOS) Firmware may need to be updated but also that it should be OK, just stick with an alienware used as Samsung brand, and if you can get one from the SSD slightly more older you might save money , you don't need a model 'latest and greatest '.

  Upgrade your GPU in the M17xR2 model can be a pain, the fan control is terrible and to really improve and play safely, you should probably use HW Monitor, so you do not cook your cards.

  Memory the AMD maps are more lenient when it comes to bi - GPU - I think remember me some upgraded GPU not X shot or SLIing in this model, but now is earlier in order not to forget.

  The M17xR2 is a very popular model, with thousands of people, the GPU upgrade - you can having to sort through the garbage to find the jewels but the info you need should be available if you do a search on google

  NotebookReview Forum would be a great place to start, 99% of the info you need should be there, the other 1% proably will be on techinferno.

  Guilbert - I still think that the M17xR2 has been one of the best they have done...

• Graphics.getScreenWidth () and the height is obsolete

  I use a recipe of screen scrolling and methods

  Graphics. getScreenWidth () and Graphics.getScreenHeight are deprecated.  Does anyone know an updated version of these methods?

  Thank you

  Scientist

  net.rim.device.api.system.Display.getWidth () and getHeight() are the recommended way to do it now.

  Note that the view class requires the signature - when I needed this information and wanted to quickly test something at home, I used the obsolete (but not requiring not signature) graphics... methods and then replaced by display... methods to work.