bandpass filter does nothing for data...

Similar Questions

• Maximus / Tesla - does nothing for the performance of Pr?

  (Sorry if this has been discussed already - could not find a thread dedicated to this)

  NVidia and Adobe has published some comparisons of performance where it seems that Tesla (via Maximus) adds a lot of performance of Premiere Pro systems.

  While all the rest I've read (including on this forum) indicates that the gains are mainly in smoother playback (less dropped frames in a complex calendar), and when the 1 card is relatively low - like Quadro 2000 or 4000.

  Issue 1: did I miss something? Maximus does nothing else more to help reading in real time.  (Please note that I don't talk about all the other apps - CS or not. Premiere Pro performance only).

  Question 2: someone at - he tested the configuration Maximum against a decent GeForce (GTX-670) card or, say, Quadro 5000?

  For example, what are the benefits of the Maximus with Q5K against Q5K + Tesla, for Premiere Pro CS6?

  Thank you!

  (Here are the things I checked before asking these questions):

  - Studio 1 Production comparative analysis

  - http://forums.adobe.com/message/4027056#4027056

  - http://forums.adobe.com/message/4207177#4207177

  - NVIDIA Maximus and Premiere Pro CS5.52 by Dennis Intuit

  (- PPBM5)

  Alex,

  You must keep in mind that with a single card of Q5 / 6K, all accelerated MPE Affairs are managed by the card of Q5 / 6K, using all of the CUDA cores available on these maps. When you change from one configuration of Maximus, by adding a map C2075 Tesla, CUDA kernels on Q5 cards / 6K are circumvented and only CUDA kernels on the map of Tesla are used for acceleration of the EMT. It's as simple as that.

  PR has never been able to use several GPU and actually adding a map of Tesla to create an environment of Maximus don't disable the Quadro card for hardware MPE and leaves map of Tesla. The remaining function for the Quadro card is to guide the monitors. That's why my reservations about this solution of Maximus, except if you 10bits out your monitors.

  Admitted, I don't know how it works with AE, AE may use several GPU, so it may be advantageous.

  Nine times, improved performance stated in the article you linked to are substantially the same, or less that we find in the test results.

  It is my belief that broadband bandwidth memory is the most important factor that determines MPE and performance so far, our test results to support this.

  If you compare the bandwidth memory of different cards, you see this emerging model:

  Video card	Band bandwidth memory	Band bandwidth memory configuration with a Tesla C2075 Maximus
  Quadro 4000	89.6 GB/s	144 GB/s
  Quadro 5000	120 GB/s	144 GB/s
  Quadro 6000	144 GB/s	144 GB/s
  Tesla C2075	144 GB/s	144 GB/s
  GTX 680	192,2 Gbps	Not possible, then it is limited to 192,2 Gbps

  Obviously the fastest solution is the GTX 680. If opting for a solution of Maximus, it is foolish to choose a Quadro 6000 on a 4000, unless you need the size of the memory of the 6000.

• The menus on the master page widget does nothing for some reason any. The site map is successfully created. Help, please...

  I am new to Adobe Muse. I created the site map correctly. When I go to the master page and select the widget menu then horizontal, that nothing is happening. Need help to get this working.

  Hi Kiki,

  The horizontal menu of the widget library must be you drag to the area of the workspace.

  Kind regards

  Neha

• & quot; _blank & quot; does nothing for me in Internet Explorer 7

  I have a bunch of menus on my Web site that are supposed to open the HTML in the empty windows using "_blank" function but now it does not work in IE 7. Now when I click on these buttons it does not open anything. Help, please!

  I have actually reset the features of IE in the Advanced tab and that seemed to fix it.

• 'MOVE TO' (local Gmail) does nothing for 10 Windows installed.

  I very often use the sequence
  CTRL has
  Right-click
  Move to
  < name of the local folder >
  to move the emails of Gmail storage to my local files
  I'm even a sequence, to the trash, and then remove all copies of Gmail (all messages, spam, trash)

  Since going to Windows 10, options and the Move To delete the Messages selected, run very, very quickly, but do not move/delete anything either, nor they deliver messages, error or other.

  I hope that some setting in Thunderbird or Windows can resolver that.

  Thank you
  JLiesner

  With the help of anti virus?
  It works in Thunderbird safe mode? (Hold down the SHIFT key when you start Thunderbird)

• Drive slowly and setup.exe does nothing

  Hello

  first: sorry for my English, I'm German, but I'll try my best ;)

  Now my problem:
  My HDD is very slow and is strangely reading (he still only reads the times and does nothing for 2-3 seconds after that).

  But my biggest problem is that if I want to install a program or a game, the Setup.exe is responsible but does nothing (I waited over 10 minutes).

  In addition, by starting the installer, the laptop hangs up (usually it's the Explorer). If I eject the disc, the laptop immediately runs normal.

  I tried a program to slow the car, but it does not work.

  Can someone help me?

  > My HDD is very slow and is strangely reading (he still only reads the times and does nothing for 2-3 seconds after that).
  This may be related to different reasons; in many cases a CURIOUS failure could be the reason to read the issues raised in these cases of disc only new ODD would help

  > But my biggest problem is that if I want to install a program or a game, the Setup.exe is responsible but does nothing (I waited over 10 minutes).
  In my opinion it's can be linked only to the installed operating system.
  It of difficult to say what might cause this exactly but a corrupted OS or registry is always a matter for such problems

  Maybe you need to reinstall the OS fresh OS installation done wonders

• Filter bar missing - add a filter does not

  Our filters on everything bar the dashboard seem to be missing. By clicking Add a filter does nothing. Any ideas?

  

  The issue seems to have more to do with an unhealthy state of the cluster, rather than the content pack. Issue has been resolved via webex. If your problem is solved now, can assign you this answered? Thank you.

• Click on 'Customize' for bar tasks does nothing!

  Hello!

  For some reason any or by clicking on 'Customize ' onthe taskbar icons , pop-up windows or by clicking on "Customize" after openingthe taskbar properties window does nothing. No window opens; no Errors pop up.

  I have the two restarted my Explorer.exe and my computer but cela did not help . I don't know when it may have started because I don't remember the last time I tried to open the 'customize '.

  Any help or ideas on what may be the cause?

  Thank you!

  Christopher-J Carlson - "of the Canada #1 Nashville Predators Fan.

  Hello, Ramesh!

  Thank you! The window opened via the method that you have suggested, but clicking on 'Customize' still does not open the window. However, you trick me reported in the right direction to fix this.

  I checked the Group Policy Editor, where I discovered that the "Notification area icons" was hidden. That he was in fact, when I looked at my control panel. So I easily unhid "Notification area icons" and theproblem solved .

  So, thanks again!

  Christopher-J Carlson - "of the Canada #1 Nashville Predators Fan.

• I just signed up for InDesign and I can't open the creative cloud app gives me an error message to launch an app then does nothing. mention the firewall and all that. Someone at - it help him?

  I just signed up for InDesign and I can't open the creative cloud app gives me an error message to launch an app then does nothing. mention the firewall and all that. Someone at - it help him?

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• CC of Photoshop for PC - ctrl-alt-arrow key does nothing

  I installed Photoshop CC on a new PC, and the combination of keys ctrl-alt-arrow does nothing. He used to reduce the area of framing around pixels and move the selection by 1 pixel. Now, it does nothing. Using shift-ctrl-alt-arrow shrinks the selection around the pixel rectangle and move the selection of 10 pixels, meaning that it is supposed to do. Any help is appreciated.

  I got this in Windows 7 with my driver Intel HD 4000 as well. Enabling auto-start for the Intel Graphics Control panel was the problem. He caught in the trap of the combination of keys Ctrl-Alt arrow, but not the Shift-Ctrl-Alt-arrow key combination.

  If the solution is simple http://superuser.com/questions/796396/how-to-disable-igfxhk-module-process-from-starting-u p-with-windows

  I just went into msconfig > Services tab, deselected "Intel HD Graphics Control Panel Service" and restarted the PC.

  You will always have access to the graphical control panel, but Ctrl-Alt-arrow is no longer blocked in Photoshop.

  Gene

• Re: update 8.1 - Scanstyles does nothing in Webkit / Firefox / Opera

  I stupidly updated 8.1 yesterday and now I get this message: «Scanstyles does nothing in Webkit/Firefox/Opera»

  ............ I only have Internet Explorer 11. I can't get rid of this message, no matter what I do, and I can't find any help anywhere on Google which is useful or sensible. It seems that many people have had this problem.

  Does anyone know how to get rid of this nuisance without speaking to me chains and things that an ordinary computer user would have no idea about.

  Thanks - in advance - for effective aid.

  I assume that you get this error on some but not all Web sites. The problem is with website wrong to identify your browser IE11 as Firefox and return data of page which can not handle IE11. The only solution for you is to report the problem to every webmaster and wait or change your browser.

• can someone tell me why I can't update to El Capitan 10.11.2? the line "Show details" gets up and I click on it to make the update. When I do this, it just goes back to doing nothing, so I can never get past this point.

  can someone tell me why I can't update to El Capitan 10.11.2?

  When I try to update "updates available have changed" guest shows up.i click "Show details" prompt to complete the update and when I do that, it just goes back to doing nothing, so I can never get past this point. can someone help me with this, please?

  Thank you very much.

  In some cases, this error message is caused by a problem in the network. Restart your router as your device at wide band, if they are separated. If there is no change, see below.

  This procedure will remove some temporary and cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.

  Please, back up all data and read this message before doing anything.

  Triple-click anywhere in the line below on this page to select this option:

  /var/folders/zz/zyxvpxvq6csfxvn_n00000s0000068

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  the contextual menu.* file should open with a selected subfolder. The subfolder has a long name beginning with "zyx" and ending with "68". Place this subfolder in the trash. Do not move other subfolders with similar names. You may be prompted for administrator login password. Restart the computer and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• I get a widow in my lower toolbar that rpet low disk space, and when I click it to try to delete the old files, it does nothing... so what do I do... ?

  I get a window in my toolbar lower repeating me low disk space and when I click it to try to remove the old files, it does nothing... so what should I do to get rid of the files in a "D" file...?

  Please perform these steps and the back of the report.

  Click Start, click computer, and it will display your hard drives and their letters. Normally C: is your operating system and where everything is stored (user: files, programs, Documents, photos, etc.). The D: is your RECOVERY partition and contains a copy of the first installation of the plant. The D: is small, about 9 to 15 GB, depending on the version of Windows.

  For example, my C: displays 306 GB free (unused) 374 GB (hard disk capacity). D: shows 2.11 free 11.5 GB GB. This is normal for HP, Compaq and others. New HP (Win 7) include an E: with less than 1 GB of capacity, to store a program utility tools. These so-called hard disks are in fact partitions installed on a physical hard disk, but not to concern. The c: partition free space is your important answer. BeAware that the D: and E: (if you have the configuration described above, are never to be used as restore points, or your personal files, they are allocated by the manufacturer to support the reinstallation of the operating system.) My example shows that my C: partition made only 68GB used on the disc, 306 GB is free (unused) 374 GB capacity.

  (1) report with numbers, and you can be helped.

  (2) Vista writes copies ghosts of all your documents (previous versions of the files). These can take many GB.

  (3) when he gets less than 20 percent free, you start to have problems with the disk defragmentation. Less than 10% results in critical problems, the problems of performance and for the worse.

  (4) if the number of free GB is really a low disk space issue, you need to move some of the large data files (pictures, videos,...) out on CD or DVD.

  If it helps, let me know. I'm not a moderator, just a user trying to use simple language to help others.

• Password accepted but does nothing (admin) user. Locked user account? How can I register as a Admin to change?

  Had problems with Solution Explorer. While changing this and that, I blocked the user accounts. My password is not rejected, but does nothing. How can I get as long as a tool fix my problem?

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  [Note: do not enter the brackets!]

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Remove the installation/rescue DVD and restart the computer. Now, you will be able to log on to the built-in Administrator compatible account now and make your changes. Once you have fixed things, connect to your additional administrative account (implemented by the recommendations below) and disable the administrator built-in again for security reasons.

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
  MS - MVP - Elephant Boy computers - don't panic!

• With the help of inputRangeSlider for Dates

  Hello

  I use 11g JDeveloper (11.1.1.6)

  I followed Duncan Mills blog: https://blogs.oracle.com/groundside/entry/using_inputnumberslider_for_dates

  I did successfully all the blog said...

  I also had the range slider on my page. However the dates aren't correctly

  As stated in the blog component inputNumberSlider a methods of bean for startDate, EndDate, and increments.

  Say is not stated in the blog...

  How could we possibly write these methods because it requires calculations of milliseconds, and it must be accurate

  Help, please

  Kind regards

  Benson

  Hello

  (1) the way I see it, the uiManager does nothing here fancy. It returns the number for the beaches in milliseconds (almost similar to hardcode). I think that the reason why you get the date 01/01 must be in your implementation of the converter (value of debug and see what exactly happens in the converter).

  (2) setting as current end date. Well, as said, the managed bean returns just long values. If the bean dateRangeSliderEndDate property Get accessor method returns something along the lines of

  http://docs.Oracle.com/javase/7/docs/API/Java/util/calendar.html

  Calendar rightNow = Calendar.GetInstance ();

  long timeInMil is rightNow. getTimeInMillis ()

  (3) to get the date in the format you want - change you a method:

  public String getAsString (FacesContext facesContext, UIComponent uIComponent, Object valueAsObject) {}

  selectedValue long = ((Double) valueAsObject) .longValue ();

  Return DateFormatUtils.format (selectedValue, "MM/dd");

  }

  A quick search on Google for DateFormatUtils

  DateFormatUtils (API of Lang 2.6 Commons)

  Hope this is enough hand-guard-body for you to complete your task

  Frank